MSI 970A User Guide

MSI 970A Manual

Get MSI 970A PDF manuals and user guides View all MSI 970A manuals
Add to My Manuals
Save this manual to your list of manuals

MSI 970A manual content summary:

  • MSI 970A | User Guide - Page 1
    970A-G43 series MS-7693 (v3.x) Mainboard  G52-76931X8
  • MSI 970A | User Guide - Page 2
    trademarks in this manual are properties of their respective owners. ￭ MSI® is registered trademark of Micro-Star Int'l Co.,Ltd. ￭ NVIDIA® is registered trademark of NVIDIA Corporation. ￭ ATI® is registered trademark of AMD Corporation. ￭ AMD® is registered trademarks of AMD
  • MSI 970A | User Guide - Page 3
    . Visit the MSI website for technical guide, BIOS updates, driver updates, and other information: http://www.msi.com/service/download Contact our technical staff at: http://support.msi.com Safety Instructions ￭ Always read the safety instructions carefully. ￭ Keep this User's Manual for future
  • MSI 970A | User Guide - Page 4
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • MSI 970A | User Guide - Page 5
    Preface MS-7693 Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment and its antenna should be installed and operated with minimum distance 20 cm between the radiator and your body. This equipment and its
  • MSI 970A | User Guide - Page 6
    Information In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: http://www
  • MSI 970A | User Guide - Page 7
    äte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in ces équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au
  • MSI 970A | User Guide - Page 8
    a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Uni recogida de estos residuos. NEDERLANDS Om het milieu te beschermen, wil MSI u eraan herinneren dat.... De richtlijn van de Europese Unie (EU
  • MSI 970A | User Guide - Page 9
    Tyto výrobky můžete odevzdat v místních sběrnách. MAGYAR Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI emlékezteti Önt, hogy ... Az Európai Unió („EU") 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002
  • MSI 970A | User Guide - Page 10
    History ii Technical Support iii Safety Instructions iii FCC-B Radio Guide 1-6 Back Panel Quick Guide 1-8 CPU (Central Processing Unit 1-10 Mounting Screw Holes 1-13 Power Supply 1-14 Memory 1-15 Expansion Slot 1-17 Video/ Graphics Cards 1-18 Internal Connectors 1-21 Jumper 1-28 Drivers
  • MSI 970A | User Guide - Page 11
    Overview 2-2 Boot device priority bar 2-3 Operation 2-4 SETTINGS 2-5 OC 2-11 ECO 2-17 BROWSER 2-18 Installing Winki 2-18 UTILITIES 2-19 Updating the BIOS with Live Update 2-21 SECURITY 2-22 Appendix A Realtek Audio A-1 Software Configuration A-2 Hardware Default Setting A-4 Appendix
  • MSI 970A | User Guide - Page 12
  • MSI 970A | User Guide - Page 13
    Thank you for choosing the 970A-G43 Series (MS-7693 v3.X) ATX mainboard. The 970A-G43 Series mainboards are based on AMD® 970 & SB950 chipsets for optimal system efficiency. Designed to fit the advanced AMD® AM3/ AM3+ processors, the 970A-G43 Series deliver a high performance and professional
  • MSI 970A | User Guide - Page 14
    Getting Started Packing Contents Mainboard Driver / Utility DVD User Guide Back IO Shield SATA Cable Optional Accessories USB 2.0 Bracket USB 3.0 Bracket the optional accessories or request part numbers, please visit the MSI website at http://www.msi.com/index.php or consult the dealer. 1-2
  • MSI 970A | User Guide - Page 15
    MS-7693 Assembly Precautions ■ The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. ■ Always turn off the power supply and unplug the power cord from the power outlet before
  • MSI 970A | User Guide - Page 16
    Mainboard Specifications Processor Support ■ Supports AMD® FXTM/ PhenomTM II/ AthlonTM II and SempronTM processors for the AM3/ AM3+ socket HyperTransport ■ HyperTransport™ 3.0, supports up to 4.8 GT/s Chipset ■ AMD® 970 & SB950 chipset Memory Support ■ 4x DDR3 DIMMs support for DDR3-1066/ 1333
  • MSI 970A | User Guide - Page 17
    6x USB 2.0 ports - 2x USB 3.0 ports - 1x LAN port - 6x audio ports ■ On-Board - 3x USB 2.0 connectors - 1x USB 3.0 connector - 1x TPM Module connector - 1x Front CPU, please visit http://www.msi.com/service/cpu-support MS-7693 For more information on compatible components, please visit http://www
  • MSI 970A | User Guide - Page 18
    Getting Started Connectors Quick Guide SYSFAN2 JPWR2 CPU1 DIMM1 DIMM2 DIMM3 CPUFAN DIMM4 Back Panel PCI_E1 PCI_E2 PCI_E3 JCI1 PCI1 PCI_E4 PCI2 JAUD1 JPWR1 JCOM1 JTPM1 JFP1 JUSB3 JUSB2 JUSB1 SYSFAN1 SATA5_6 SATA3_4 SATA2 SATA1 JBAT1 JFP2 JUSB4 1-6
  • MSI 970A | User Guide - Page 19
    Chapter 1 Connectors Reference Guide Port Name Port Type Back Panel I/O Ports CPU1 AM3/ AM3+ CPU Socket CPUFAN,SYSFAN1~2 Fan Power Connectors DIMM1~4 DDR3 Memory Slots JAUD1 Front Panel Audio Connector JBAT1 Clear CMOS Jumper JCI1 Chassis Intrusion Connector JCOM1 Serial Port
  • MSI 970A | User Guide - Page 20
    Getting Started Back Panel Quick Guide PS/2 Mouse LAN USB 2.0 Port USB 2.0 Port USB USB 2.0-compatible devices. ▶ USB 3.0 Port USB 3.0 port is backward-compatible with USB 2.0 devices. It supports data transfer rate up to 5 Gbit/s (SuperSpeed). Important In order to use USB 3.0 devices, you must
  • MSI 970A | User Guide - Page 21
    Chapter 1 MS-7693 ▶ LAN The standard RJ-45 LAN jack is for connecting to a Yellow Local Area Network (LAN). Green/ Orange LED Left Right Color Yellow Green Orange LED State Off On(Steady) On(flashing) Off On On Condition LAN link is not established. LAN link is established. The computer is
  • MSI 970A | User Guide - Page 22
    Unit) Introduction to AM3/ AM3+ CPU The surface of of the CPU. Overclocking This mainboard is designed to support overclocking. Before attempting to overclock, please make sure that to operate beyond product specifications is not recommend. MSI does not guarantee the damages or risks caused
  • MSI 970A | User Guide - Page 23
    Chapter 1 MS-7693 CPU & Cooler Installation When you are installing the CPU, make sure the CPU has a cooler attached on the top to prevent overheating. Meanwhile, do not forget to apply some thermal paste on CPU before installing the heat sink/cooler fan for better heat dispersion. Follow the
  • MSI 970A | User Guide - Page 24
    Getting Started 5. Position the cooling set onto the retention mechanism. Hook one end of the clip to hook first. 6. Then press down the other end of the clip to fasten the cooling set on the top of the retention mechanism. Locate the Fix Lever and lift up it . 7. Fasten down the lever. 8.
  • MSI 970A | User Guide - Page 25
    with your computer case. The locations of the screw holes on the mainboard are shown below. For more information, please refer to the manual that came with the computer case. Important • Install the mainboard on a flat surface free from unnecessary debris. • To prevent damage to the mainboard
  • MSI 970A | User Guide - Page 26
    Getting Started Power Supply JPWR1: ATX 24-pin Power Connector This connector allows you to connect an ATX 24-pin power supply. To connect the ATX 24-pin power supply, align the power supply cable with the connector and firmly press the cable into the connector. If done correctly, the clip on the
  • MSI 970A | User Guide - Page 27
    compatible components, please visit http://www.msi.com/service/test-report DDR3 240-pin, 1.5V 48x2=96 DDR3 standard is not backward compatible. Always install DDR3 memory modules in DDR3 DIMM slots. • To ensure system stability, memory modules must be of the same type and density. • Due to chipset
  • MSI 970A | User Guide - Page 28
    clips at each side of the DIMM slot will automatically close when the memory module is properly seated and an audible click should be heard. 3. Manually check if the memory module has been locked in place by the DIMM slot's side clips. Notch Volt 1-16
  • MSI 970A | User Guide - Page 29
    ports for expansion cards, such as discrete graphics or audio cards. PCIe Slot The PCIe slot supports the PCIe interface expansion card. PCIe 2.0 x16 Slot PCIe 2.0 x1 Slot PCI Slot The PCI slot supports additional LAN, SCSI, USB, and other add-on cards that comply with PCI specifications. 32-bit
  • MSI 970A | User Guide - Page 30
    MSI graphics cards are recommended. Single Video Card Installation 1. Determine what type of expansion slot(s) the video card Some video cards might require a power cable directly from the power supply. 5. Please consult your video card's manual for further instructions regarding driver installation
  • MSI 970A | User Guide - Page 31
    gaming platform. This mainboard will automatically detect CrossFire™ technology and make changes in the BIOS as needed. Follow the instructions below to ensure a successful two-way CrossFire™ installation. 1. Install two AMD best compatibility with the mainboard, MSI graphics cards are recommended. •
  • MSI 970A | User Guide - Page 32
    Getting Started 3. Boot up the computer and install the drivers and software included in your video card package. For more information, please refer to the manual that came with your video card. 4. After all of the hardware and software has been properly installed, reboot the system. After entering
  • MSI 970A | User Guide - Page 33
    SATA devices, such as HDDs, SSDs, and optical drives, be screwed down into the case. Refer to the manual that came with your computer case or your SATA device for further installation instructions. • Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission
  • MSI 970A | User Guide - Page 34
    Getting Started CPUFAN,SYSFAN1~2: Fan Power Connectors The fan power connectors support system cooling fans with +12V. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with a speed sensor to take advantage of the CPU fan control. Remember to
  • MSI 970A | User Guide - Page 35
    connectors connect to the front panel switches and LEDs. The JFP1 connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide. When installing the front panel connectors, please use the enclosed mConnectors to simplify installation. Plug all the wires from the computer case
  • MSI 970A | User Guide - Page 36
    be activated. The system will record this intrusion and a warning message will flash on screen. To clear the warning, you must enter the BIOS utility and clear the record. 1.C2.IGNTroRuUnd JUSB1~3: USB 2.0 Expansion Connector This connector is designed for connecting high-speed USB peripherals such
  • MSI 970A | User Guide - Page 37
    MS-7693 JUSB4: USB 3.0 Expansion Connector The USB 3.0 port is backwards compatible with USB 2.0 devices. It supports data transfer rates up to 5Gbits/s (SuperSpeed). Chapter 1 115V USB 3.0 Bracket (optional) 111.U2S1.U3B1S.2G4B.1.0rU25o+..Su10Un6B-S1d.3G7B_1.r3TU8o1_X.uSU9Tn_B.2XSdCP30_Bo__.
  • MSI 970A | User Guide - Page 38
    the front audio panel located on your computer case. This connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide. 2.G4r.oN6uC.Mn8d.1INC0o.DHPeeitnaedctPiohnone Detection 1.M3.IMC5.ILHC7e.RS9a.EdHNPeShaEodn_PeShERoNneDL JCOM1: Serial Port Connector This connector is a 16550A
  • MSI 970A | User Guide - Page 39
    MS-7693 JTPM1: TPM Module Connector This connector connects to a TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages. TPM module (optional) 2.34V.36S..3tS8aVe.n15Prd0iVaob1.NlwyP2I1o.eRopG4rwoPQ.rwGeionreurornudnd 1.L3P.L5CP.LCC7P.loLRC9cP
  • MSI 970A | User Guide - Page 40
    the mainboard to save system configuration data. With the CMOS RAM, the system can automatically boot into the operating system (OS configuration, set the jumpers to clear the CMOS RAM. 1 Keep Data 1 Clear Data Important You can clear the CMOS RAM by shorting this jumper while the system is off
  • MSI 970A | User Guide - Page 41
    Installer Total Installer is very easy to use and does a great job of finding necessary drivers. Please follow the steps below to install drivers and utilities for your new computer. 1. Insert MSI Driver Disc into the optical drive. The setup screen will automatically appear if autorun is enabled
  • MSI 970A | User Guide - Page 42
  • MSI 970A | User Guide - Page 43
    a revolutionary UEFI interface that allows you to setup and configure your system for optimum use. Using your mouse and keyboard, users can change BIOS settings, monitor CPU temperature, select the boot device priority and view system information such as the CPU name, DRAM capacity, the OS version
  • MSI 970A | User Guide - Page 44
    start the Power On Self Test (POST) process. When the message below appears on the screen, please key to enter CLICK BIOS II: Press DEL key to enter Boot device priority bar BIOS menu selection BIOS menu selection Menu display Important The pictures in this guide are for reference only and
  • MSI 970A | User Guide - Page 45
    the BIOS version. ▶ BIOS menu selection The following options are available: ■ SETTINGS - Use this menu to specify your settings for chipset features energy-saving settings. ■ BROWSER - This feature is used to enter the MSI Winki web browser. ■ UTILITIES - This menu contains utilities for backup
  • MSI 970A | User Guide - Page 46
    II allows you to control BIOS settings with the mouse and the keyboard. The following table lists and describes the hot keys and the mouse operations. Hot key Mouse Description Select
  • MSI 970A | User Guide - Page 47
    that you want (usually the current date). The format is . day Day of the week, from Sun to Sat, determined by BIOS. Read-only. month The month from Jan. through Dec. date year The date from 1 to 31 can be keyed by numeric function keys. The year
  • MSI 970A | User Guide - Page 48
    ▶ System Information Shows detailed system information, including CPU type, BIOS version, and Memory (read only). Advanced ▶ PCI Subsystem Settings have installed your OS using AHCI and you clear your BIOS/reset to default settings, you will need to change this function back to AHCI to
  • MSI 970A | User Guide - Page 49
    The HPET (High Precision Event Timers) is a component that is part of the chipset. You can enable it, and will provide you with the means to get to enable/ disable the integrated USB 2.0 controller. ▶ Legacy USB Support Enable or disable support for USB keyboards, mice and floppy drives. You will be
  • MSI 970A | User Guide - Page 50
    BIOS Setup ▶ Power Management Setup Press to enter the sub-menu. ▶ EuP 2013 Energy Using Products Lot 6 2013 (EUP) reduces power consumption when system is off or in standby mode. Note: When enabled, the system will not support be available When "MSI Fast Boot" is disabled. ▶ Wake Up Event
  • MSI 970A | User Guide - Page 51
    activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep state. ▶ Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard These Enabled] The OS boots straight to the GUI without showing the POST screen, [Disabled] Shows the POST messages at boot. == Boot Option Priorities== ▶ 1st~9th Boot
  • MSI 970A | User Guide - Page 52
    ▶ Discard Changes This item is used to abandon all changes. ▶ Restore Defaults This item is used to load the optimized default values set by the BIOS vendor. == Boot Override == The installed storage devices will appear on this menu, you can select one of them be a boot device. ▶ Built-in EFI Shell
  • MSI 970A | User Guide - Page 53
    -7693 Chapter 2 Important • Overclocking your PC manually is only recommended for advanced users. • Overclocking internal clock speed of the processor. This feature can only be changed if the processor supports this function. ▶ Adjusted CPU Frequency It shows the adjusted CPU frequency. Read-only.
  • MSI 970A | User Guide - Page 54
    the BIOS setup. Set "Adjust CPU-NB Ratio" and "HT Link Speed" to [x8]. System restart. Fail Success You will see the "X4" (quad core) or "X2" (dual core for Sempron series only) during POST. AMD Phenom(tm) II X4 Processor AMD Sempron(tm) II X2 Processor Clear CMOS data. The CPU does not support
  • MSI 970A | User Guide - Page 55
    the following "Advanced DRAM Configuration" sub-menu to be determined by BIOS based on the configurations on the SPD. Selecting [Link] or [ for each channel and the following related "Advanced DRAM Configuration" sub-menu manually. ▶ Advanced DRAM Configuration Press to enter the sub-menu
  • MSI 970A | User Guide - Page 56
    BIOS Setup ▶ tRRD Specifies the active-to-active delay of different banks. ▶ tRTP Time interval between a read and a precharge command. ▶ tFAW This item is used to
  • MSI 970A | User Guide - Page 57
    Voltage These items are used to adjust the voltage of CPU, Memory and chipset. ▶ Spread Spectrum This function reduces the EMI (Electromagnetic Interference) generated generator pulses. Important • If you do not have any EMI problem, leave the setting at [Disabled] for optimal system stability and
  • MSI 970A | User Guide - Page 58
    by pressing [F4]. Press to enter the sub-menu. ▶ CPU Technology Support Press to enter the sub-menu. The sub-menu shows the installed CPU required to double confirm that: • Run BIOS Setup, and select OC. Under OC Menu, find CPU Features > AMD Cool'n'Quiet, and set this item to
  • MSI 970A | User Guide - Page 59
    )/ disable (disabled) the CPU power phase switch feature to reach the best power saving. ▶ Motherboard LED Control This item allows you to enable (Auto)/ disable (disabled) the mainboard phase LED. ▶ C1E Support To enable this item to reduce the CPU power consumption while idle. Not all processors
  • MSI 970A | User Guide - Page 60
    BIOS Setup BROWSER Please install the MSI "Winki" application first in the Windows operating system with the MSI Driver Disc before using the browser. Then you can click the BROWSER to access the Internet, e-mail and instant messaging. Installing Winki To install Winki, follow
  • MSI 970A | User Guide - Page 61
    ) it. 2. Executing Winki stored in USB flash drive/ MSI Driver Disc by pressing to choose boot device during POST. ▶ Live Update This tool can detect and update your BIOS online so that you won't need to spend time searching manually. Important HDD Backup and Live Update request Winki, please
  • MSI 970A | User Guide - Page 62
    Please setup a specific folder in specific USB/ Storage drive to save BIOS file from BIOS ROM chip data. Note: it only supports FAT/ 32 file system drive. ▶ Select one file to update BIOS This item allows you to select a particular BIOS file from the USB/ Storage (FAT/ 32 format only) drive for
  • MSI 970A | User Guide - Page 63
    will automatically detect the version of BIOS and download the appropriate file. 5. Click the confirm button to update the BIOS. Important Do not unplug or shut off your system during BIOS Flash. Incorrect BIOS flashing can cause the motherboard to not POST. Please ensure you have the correct
  • MSI 970A | User Guide - Page 64
    Set the administrative password that will be required to enter the BIOS. ▶ User Password Set the user password that will be you can enter the setup and OS without authorization. ▶ U-Key Enable or disable USB driver device as key. This requires the USB device to be plugged in for access to the
  • MSI 970A | User Guide - Page 65
    Appendix A Realtek Audio The Realtek audio provides 8-channel DAC. To achieve the 8-channel sound effect, the 7th and 8th channels must be plugged into the output on the front panel. The section will tell you how to install driver and use the software.
  • MSI 970A | User Guide - Page 66
    ). You may double click the icon and the GUI will pop up accordingly. double click the icon It is also available to enable the audio driver by clicking the Realtek HD Audio Manager from the Control Panel. Software panel overview The following figure describes the function of the Realtek HD Audio
  • MSI 970A | User Guide - Page 67
    Appendix A MS-7693 ■ Device Selection Here you can select a audio output source to change the related options. The "check" sign (in orange) indicates the devices as default. ■ Volume Adjustment You can control the volume or balance the right/left side of the speakers that you plugged in front or
  • MSI 970A | User Guide - Page 68
    Realtek Audio Hardware Default Setting The following diagrams are audio back panel default setting. ■ Backpanel audio jacks to 2-channel speakers diagram Front ■ Backpanel audio jacks to 4-channel speakers diagram Front Rear A-4
  • MSI 970A | User Guide - Page 69
    ■ Backpanel audio jacks to 6-channel speakers diagram Front MS-7693 Center & SubwoRofeear r ■ Backpanel audio jacks to 8-channel speakers diagram Front Center & Side SSuurbrwouoRnodfeear r Appendix A A-5
  • MSI 970A | User Guide - Page 70
  • MSI 970A | User Guide - Page 71
    Appendix B AMD RAID The integrate one SATA host controller separately, and support RAID function for performance and reliability. The SATA RAID provides support for RAID 0 (Striping), RAID 1 (Mirroring), RAID 10 (Striping & Mirroring) & RAID 5 (striping with parity) (optional). RAID 0 greatly
  • MSI 970A | User Guide - Page 72
    AMD RAID RAID Configuration Creating and deleting RAID set and performing other RAID setting up operations are done in the RAID BIOS. During boot-up ... Important Be sure to enable the RAID function for SATA device in BIOS before configuring the RAID Option ROM Utility. The RAID Option ROM utility
  • MSI 970A | User Guide - Page 73
    Appendix B MS-7693 View Drives Assignments This window displays the model number, capacities and assignment of the drives physically attached to the SATA host adapter. B-3
  • MSI 970A | User Guide - Page 74
    AMD RAID LD View / LD Define Menu (Creating RAID) The selection of the the system and plan the data storage strategy. RAID sets can be created either automatically, or to allow the greatest flexibility, manually. 1. Press 2 on the Main Menu screen to enter the LD View Menu. 2. And then press [Ctrl +
  • MSI 970A | User Guide - Page 75
    Appendix B MS-7693 ■ Stripe Block Size, the default 64KB is best for most applications. RAID 0 or 10 only. ■ Gigabyte Boundary, allows use of slightly smaller replacement drives. 3. On the Drives Assignments window, use the arrow key to choose the hard drives which you want to make part of the LD,
  • MSI 970A | User Guide - Page 76
    AMD RAID 6. The message will show up on the bottom, press any key to use maximum capacity or press [Ctrl-Y] to modify array capacity manually. Important • The default capacity is the full capacity of the selected hard drives. • If you allocate the first LD capacity manually, you can create second LD
  • MSI 970A | User Guide - Page 77
    Appendix B MS-7693 Delete LD Menu (Deleting RAID) 1. Press "3" on the main to enter the Delete LD Menu. 2. Choose a LD No. you want to delete and press [Del] or [Alt+D] delete the RAID set. 3. On the next screen, a message will display to inform you, press "Ctrl+Y" to delete the RAID set or other
  • MSI 970A | User Guide - Page 78
    / DVD/ USB drive. Important Please follow the instruction below to make a "RAID Driver" for yourself. • Insert the MSI Driver Disc into optical drive. • Click the "Browse CD" on the Setup screen. • Copy all the contents in the : \\ChipSet\AMD\Package\Drivers\SBDrv\SB9xx\RAID (and then, please select
  • MSI 970A | User Guide - Page 79
    -7693 ■ Existing Windows Driver Installation 1. Insert the MSI DVD into the DVD-ROM drive. 2. The DVD will auto-run and the setup screen will appear. 3. Under the Driver tab, click on AMD chipset drivers by your need. The AMD chipset drivers includes RAID Driver. 4. The driver will be automatically
  • MSI 970A | User Guide - Page 80
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
970A-G43 ser±es
MS-7693 (v3.x) Ma±nboard
G52-76931X8