MSI E7520 User Manual

MSI E7520 Manual

Get MSI E7520 PDF manuals and user guides View all MSI E7520 manuals
Add to My Manuals
Save this manual to your list of manuals

MSI E7520 manual content summary:

  • MSI E7520 | User Manual - Page 1
    E7520 Master Series MS-9136 SSI Server Board English Version G52-S9136X1 i
  • MSI E7520 | User Manual - Page 2
    Manual Rev: 1.0 Release Date: July 2004 FCC-A Radio Frequency Interference Statement This equipment radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
  • MSI E7520 | User Manual - Page 3
    Support If a problem arises with your system and no solution can be obtained from the user's manual, MSI website for FAQ, technical guide, BIOS updates, driver updates, and other information: http://www.msi.com.tw/program/service/faq/ faq/esc_faq_list.php Contact our technical staff at: support@msi
  • MSI E7520 | User Manual - Page 4
    1. Always read the safety instructions carefully. 2. Keep this User's Manual for future reference. 3. Keep this equipment away shock. 11. If any of the following situations arises, get the equipment checked by a service personnel: h The power cord or plug is damaged. h Liquid has penetrated into the
  • MSI E7520 | User Manual - Page 5
    Technical Support ...iii Safety Instructions ...v Chapter 1. Getting Started 1-1 Mainboard Specifications 1-2 Mainboard Layout 1-6 MSI Special Features 1-7 PC Alert™ III 1-7 Chapter 2. Hardware Setup 2-1 Quick Components Guide 2-2 Central Processing Unit: CPU 2-3 CPU Installation Procedures
  • MSI E7520 | User Manual - Page 6
    Controller Settings A-4 SCSI Bus Interface Definitions A-4 Additional Options A-5 BIOS Information A-8 Disk Utilities ...A-9 Appendix B: Adaptec SATA RAID Utility for Intel ICH-HR B-1 Introduction ...B-2 1. Overview B-2 2. Operating System Compatibility B-2 3. Storage Requirements B-2 vi
  • MSI E7520 | User Manual - Page 7
    Red Hat Linux 7.3 or 8.0 B-5 4. Installing SuSE Linux 8.0 or 8.1 B-6 Installing Adaptec Storage Manager - Browser Edition B-7 1. Overview B-7 2. Supported Browsers B-7 3. Typical, Custom, and Compact Installations B-7 4. Installing Adaptec Storage Manager on Windows B-8 5. Installing Adaptec
  • MSI E7520 | User Manual - Page 8
    9136 v1. X) SSI server board. The E7520 Master Series are superior computer mainboards based on Intel® Lindenhurst & Hance Rapids chipsets for optimal system efficiency. Designed to fit the advanced Intel® XeonTM processors in the 604 pin package, the E7520 Master Series provide a solution for front
  • MSI E7520 | User Manual - Page 9
    Mainboard Specifications CPU h Dual XeonTM (FSB 800MHz) processors in the 604-pin package h 1MB L2 Cache h 6.4GB/s Trans Rate Chipset h Intel® Lindenhurst (E7520) MCH (Memory Controller Hub) h Intel® Hance Rapids ICH (I/O Controller Hub) h Intel® PXH PCI bridge Memory Bus Feature h Supports 8 184
  • MSI E7520 | User Manual - Page 10
    in total, including CPU fan mounting holes MSI Reminds You... Enabling the functionality of Hyper-Threading Technology for your computer system requires ALL of the following platform Components: *CPU: Intel® Pentium® 4 or Xeon™ Processors with HT Technology; *Chipset: Intel® Chipsets that support HT
  • MSI E7520 | User Manual - Page 11
    MS-9136 SSI Server Board Video h Integrated ATI Radeon™ 7000 graphics controller - Onboard 8MB Video SDRAM MSI Reminds You... Please refer to Table 1 for 2D modes supporting both CRT and LCD. The table specifies the minimum memory requirements for various display resolutions, refresh rates and
  • MSI E7520 | User Manual - Page 12
    BMC card (with QLogic Zircon UL BMC) and MSI iConsole AP support IPMI 1.5 (option) MS-9569 BMC Card Specifications Supports ASR (Automatic Server Restart) System Management Two SMBus 2.0 (I2C) - One SMBus for Intel® 82541 - One SMBus for ADT 7463, Winbond 83791, SEEPROM access, CPU thermal sensor CPU
  • MSI E7520 | User Manual - Page 13
    FAN1 mPGA CN31 COM2 B AT T + SOCKET 604 LAN J4 J5 Intel 82541 Gigabit LAN Intel 82541 Gigabit LAN FAN5 PCI 6 PCI 5 PCI 4 AT I RADEON PCI 3 PCI 2 JCI1 PCI 1 Intel Lindenhurst Intel PXH FAN6 CN21 FAN2 CN39 Intel Hance Rapids Adaptec AIC-7902W SATA1 SATA2 CN44 USB2 JSSI1 SCSI
  • MSI E7520 | User Manual - Page 14
    monitor CPU & system temperatures Ø monitor fan speed(s) Ø monitor system voltage Ø monitor chassis intrusion If one of the MSI Reminds You... 1. Items shown on PC Alert™ III vary depending on your system status. 2. The mainboard bound with MS-9569 BMC card (Server Management Features) won't support
  • MSI E7520 | User Manual - Page 15
    Hardware Setup Chapter 2. Hardware Setup Hardware Setup This chapter provides you with the information about hardware setup procedures. While doing the installation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong
  • MSI E7520 | User Manual - Page 16
    MS-9136 SSI Server Board Quick Components Guide Back Panel I/O, p.2-9 CN14, p.2-15 DIMM1~8, p.2-5 JPWR1, p.2-8 FAN3, p.2-10 604 mPGA JPWR2, p.2-8 FAN1, p.2-10 CPU, p.2-3 SOCKET mPGA COM2, p.2-16 FAN5, p.2-10 SOCKET 604 FAN6/2, p.2-10 IDE2/1, p.2-11 CN39,p.2-21 FDD1,p.2-10 PCI Slots,
  • MSI E7520 | User Manual - Page 17
    SO CK ET mP GA S OC KE T 6 04 Hardware Setup Central Processing Unit: CPU The mainboard supports Single/Dual Intel® Xeon™ processor(s). The mainboard uses two CPU sockets called Socket 604 for easy CPU installation. You can install SINGLE or DUAL CPUs on the board to meet your own needs. Keep the
  • MSI E7520 | User Manual - Page 18
    a 170-degree angle. Gold arrow 3. Look for the gold arrow. The gold arrow should point towards the lever pivot. The CPU can only fit in the correct orientation. 4. If the CPU is correctly installed, the pins should be completely embedded into the socket and can not be seen. Please note that any
  • MSI E7520 | User Manual - Page 19
    Data bandwidth per channel 2.13 GB/s (DDR266) / 2.7 GB/s (DDR333) ‹ Support for S4EC/D4ED (144,128) x4, Intel x4 Single Device Data Correction (x4 SDDC) ECC in dual channel mode ‹ Support SEC/DED (72,64) ECC on each channel when Intel Single Device Data Correction (SDDC) is disabled Do not install
  • MSI E7520 | User Manual - Page 20
    MS-9136 SSI Server Board Memory Population Rules The mainboard supports both single- & dual-channel modes. Install at least one DIMM module on the slots. You can install either single- or double-sided modules to meet your own needs. In dual-channel mode, make sure that you install memory modules of
  • MSI E7520 | User Manual - Page 21
    Hardware Setup Memory Speed/CPU FSB Support Matrix FSB800 DDR266 OK DDR333 OK Installing DDR Modules 1. The DDR DIMM has only one notch on the center of module. The module will only fit in the right orientation. 2. Insert the DIMM memory module vertically into the DIMM slot.
  • MSI E7520 | User Manual - Page 22
    mainboard supports SSI . SSI 8-Pin Power Connector: JPWR2 This connector provides 12V power output to the CPU. JPWR1 1 12 13 24 JPWR2 8 5 4 1 JPWR1 Pin Definition PIN 4 GND 5 +12V 6 +12V 7 +12V 8 +12V MSI Reminds You... 1. Power supplies of 300watt (and up) are highly recommended for
  • MSI E7520 | User Manual - Page 23
    Mouse Hardware Setup Back Panel Parallel Dump Switch LAN (Reserved Function) Keyboard USB COM 1 VGA System ID Button LAN Mouse/Keyboard Connector Pin6 NC Pin5 Mouse/KBD Clock USB Ports Pin4 VCC Pin3 GND Pin2 NC Serial Port 1 2 3 4 5 6 7 8 9 Pin1 Mouse/KBD DATA PIN 1 2 3 4 5 6 7 8 9
  • MSI E7520 | User Manual - Page 24
    The FAN1, FAN2, FAN3, FAN5, and FAN6 support system cooling fan with +12V. It supports three-pin head connector. When connecting the wire has a System Hardware Monitor chipset onboard, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control. GND +12V Sensor
  • MSI E7520 | User Manual - Page 25
    , 120MB Floppy (reserved for future BIOS) and other devices. These connectors support the provided IDE hard disk cable. IDE2 IDE1 IDE1 (Primary IDE Connector) IDE Connector) IDE2 can also connect a Master and a Slave drive. MSI Reminds You... If you install two hard disks on cable, you must
  • MSI E7520 | User Manual - Page 26
    : SATA1, SATA2 The southbridge Intel® Hance Rapids ICH provides a hybrid solution that combines two independent SATA ports for support of up to two Serial and connect to the hard disk devices Connect to SATA1 or SATA2 MSI Reminds You... Please do not fold the Serial ATA cable into 90-degree angle
  • MSI E7520 | User Manual - Page 27
    mainboard provides one USB 2.0 pin header USB2 (optional USB 2.0 bracket available) that is compliant with Intel® I/O Connectivity Design Guide. USB 2.0 Intrusion 21 ACPI Sleep Switch (GND) 22 NIC#2 Activity LED + 23 NMI to CPU Switch 25 Key 24 NIC#2 Activity LED 26 Key 27 ID LED+ 28 SYSRDY+
  • MSI E7520 | User Manual - Page 28
    320 MB/sec. SCSI's commitment to backward compatibility and legacy support are the primary reasons for its durability as an I/O interface, 35 JSCSI 1 Pin Definition PIN SIGNAL 1 VCC5 2 SCSI_LED 3 SCSI_LED 4 VCC5 MSI Reminds You... SCSI LED connects to JFP1 HDD LED (storage LED) pins. The
  • MSI E7520 | User Manual - Page 29
    Hardware Setup SSI 5-Pin Power Connector: CN14 This connector provides power supply for the System Management Bus (SMB). CN14 1 Pin Definition PIN SIGNAL 1 SMB clock 2 SMB data 3 PS alert 4 GND 5 3.3RS 4-pin I2C Bus Connector: CN28 5-pin I2C Bus Connector: CN15 The mainboard provides
  • MSI E7520 | User Manual - Page 30
    designed to facilitate the management of two or more MS-9136 systems. When one of the systems crashes, users may press the CN31 button on the go out. CN31 Back Panel Serial Port Connector: COM 2 The mainboard provides one 9-pin header as serial port COM 2. The port is a 16550A high speed communication
  • MSI E7520 | User Manual - Page 31
    is turned on. If you want to clear the system configuration, use the JBAT1 (Clear CMOS Jumper) to clear data. 1 JBAT1 1 1 Keep CMOS Clear CMOS MSI Reminds You... You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 1-2 pin position. Avoid clearing the CMOS while the
  • MSI E7520 | User Manual - Page 32
    MS-9136 SSI Server Board BIOS Boot Block Protect Jumper: J1 This jumper is used to protect the BIOS boot block from virus infection. When locked, the BIOS boot block cannot be accessed, making BIOS update impossible. When BIOS update is intended, remove the jumper cap to disable BIOS flash
  • MSI E7520 | User Manual - Page 33
    PCI (Peripheral Component Interconnect) Slots The motherboard provides one 32-bit Master PCI slot, three 64-bit connecting to PXH channel A, 3.3V device only (supports ZCR card) PCI 1: 32-bit/33MHz PCI slot from Hance Rapids, 3.3V device only MSI Reminds You... When adding or removing expansion cards
  • MSI E7520 | User Manual - Page 34
    MS-9136 SSI Server Board PCI Interrupt Request Routing The IRQ, acronym of interrupt request line and pronounced I-R-Q, are hardware lines over which devices can send interrupt signals to the microprocessor. The PCI IRQ pins are typically connected to the PCI bus INT A# ~ INT D# pins as follows:
  • MSI E7520 | User Manual - Page 35
    Hardware Setup SO DIMM (Small Outline DIMM) The SO DIMM has 144 pins and supports a full 64-bit transfer. It is specifically designed for users to install MSI's proprietary server management tool -- MS-9569 BMC (Baseboard Management Controller) card. 143 144 CN39 1 1 3 5 7 COM1_DI(I) COM1_RST
  • MSI E7520 | User Manual - Page 36
    during the system boot- ing up, and requests you to run SETUP. ” You want to change the default settings for customized features. MSI Reminds You... 1. The items under each BIOS category described in this chapter are under continuous update for better system performance. Therefore, the description
  • MSI E7520 | User Manual - Page 37
    MS-9136 SSI Server Board Entering Setup Power on the computer and the system will start POST (Power On Self Test) process. When the message below appears on the screen, press key to enter Setup. Press F2 to enter SETUP If the message disappears before you respond and you still wish to enter
  • MSI E7520 | User Manual - Page 38
    BIOS Setup Getting Help After entering the Setup menu, the first menu you will see is the Main Menu. Main Menu The main menu lists the setup functions you can make changes to. You can use the arrow keys ( ↑↓ ) to select the item. The on-line description of the highlighted setup function is
  • MSI E7520 | User Manual - Page 39
    , such as time, date etc. System Summary Use this menu to view system settings and CPU configurations. Advanced Use this menu to set up the items of special enhanced features available on your system's chipset. IPMI (Optional) This setup screen is for IPMI (Intelligent Platform Management Interface
  • MSI E7520 | User Manual - Page 40
    BIOS Setup Security Use this menu to set Supervisor and User Passwords. Boot Use this menu to specify the priority of boot devices. Exit This menu allows you to load the BIOS default values or factory default settings into the BIOS and exit the BIOS setup utility with or without changes. 4-5
  • MSI E7520 | User Manual - Page 41
    menu are for basic system information and configuration. Each item includes none, one or more setup items. Use the Up/Down arrow keys or
  • MSI E7520 | User Manual - Page 42
    BIOS Setup If you select [Manual], related information is asked to be entered to the following items. Enter the information directly from the keyboard. This information should be provided in the
  • MSI E7520 | User Manual - Page 43
    are for basic system information and configuration. Each item includes none, one or more setup items. Use the Up/Down arrow keys or
  • MSI E7520 | User Manual - Page 44
    to malfunction. Item Specific Help 8Processor Settings 8Advanced Chipset Control 8PCI Configuration 8Peripheral Configuration 8Boot Features 8DMI , the processor will use only one core to execute the instructions. Please disable this item if your operating system doesn't support HT Function
  • MSI E7520 | User Manual - Page 45
    SSI Server Board MSI Reminds You... Enabling the functionality of Hyper-Threading Technology for your computer system requires ALL of the following platform components: * CPU: An Intel® Pentium® 4 Processor with HT Technology; * Chipset: An Intel® Chipset that supports HT Technology; * BIOS
  • MSI E7520 | User Manual - Page 46
    awakened from power saving modes when activity or input signal from the specified modem is detected. Options: [Enabled], [Disabled]. MSI Reminds You... You need to install a modem card supporting power on function for "Wake On Ring" function. Wake On RTC Alarm This is used to enable or disable the
  • MSI E7520 | User Manual - Page 47
    port B : Mode : Base I/O address : Interrupt : PS/2 Mouse : Legacy USB Support: [Enabled] [3F8] [IRQ 4] [Enabled] [Normal] [2F8] [IRQ 3] [Auto users to configure the base I/O address and IRQ of Port A/Port B manually. Selecting [Auto] allows BIOS to automatically determine the correct base I/O port
  • MSI E7520 | User Manual - Page 48
    port and you install a serial pointing device, select [Disabled]. Legacy USB Support Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating system that does not support or have any USB 1.1/2.0 driver installed, such as DOS and
  • MSI E7520 | User Manual - Page 49
    Console Redirection. Console Redirection BIOS Redirection Port: [Disabled] Baud Rate: Flow Control: Console Type: FIFO Level: Console Connection: Continue C.R. after POST: # of Video Pages to Support: [19.2K] [CTS/RTS] [PC ANSI] [Level 14] [Direct] [On] [1] 4-14
  • MSI E7520 | User Manual - Page 50
    : [Direct], [Via modem]. Continue C. R. after POST Selecting [On] will enable Console Redirection after OS has loaded. Options: [On], [Off]. # of Video Pages to Support This setting controls the number of video pages to allocate for Console Redirection when video hardware is not available. 4-15
  • MSI E7520 | User Manual - Page 51
    ↑↓ Select Item -/+ Change Values F9 Setup Defaults Esc Exit ↔ Select Menu Enter Selec8t Sub-Menu F10 Save and Exit IPMI Specification Version It shows the support version of IPMI specification. (read only) BMC Device ID It shows the ID of the BMC device. (read only) BMC Device Version It shows the
  • MSI E7520 | User Manual - Page 52
    BIOS Setup Change COM Port Setting This setting controls the COM port setting. COM Port on BMC This setting disables/enables the COM port on BMC. System Event Logging This setting disables/enables the logging of system events. Clear System Event Log Enabling this selection will force the BIOS to
  • MSI E7520 | User Manual - Page 53
    MS-9136 SSI Server Board System Event Log Press to display the System Event Log. System Event Log SEL Entry Number = SEL Record ID = SEL Record Type = Timestamp = Generator Id = SEL Message Rev = Sensor Type = Sensor Number = SEL Event Type = SEL Event Data = 1 0010 02 - System Event
  • MSI E7520 | User Manual - Page 54
    BIOS Setup Security This section lets you set security passwords to control access to the system at boot time and/or when entering the BIOS setup program. It also allows you to set virus protection at hard disk boot sector. PhoenixBIOS Setup Utility Main System Summary Advanced IPMI Security Boot
  • MSI E7520 | User Manual - Page 55
    MS-9136 SSI Server Board Password on boot Choosing [Enabled] requires a password on boot. It requires prior setting of the supervisor password. If the supervisor password is set and this option is disabled, BIOS assumes the user is booting. Options: [Enabled], [Disabled]. Fixed disk boot sector
  • MSI E7520 | User Manual - Page 56
    , Hard Drive These are the generic types of devices on your system from which you can boot an operating system. You may have more than one device of each type. If so, the generic type is marked with a plus or minus sign. Use the key to expand or collapse the
  • MSI E7520 | User Manual - Page 57
    Server Board Exit The following sections describe each of the options on this menu. Note that does not exit this menu. You must select one of the items from the menu or menu bar to exit. PhoenixBIOS Setup Utility Main System Summary Advanced IPMI Security Boot Exit Exit Saving Changes
  • MSI E7520 | User Manual - Page 58
    SCSI BIOS Setup Appendix A: SCSI BIOS Setup (Optional) This chapter provides information on the Small Computer System Interface (SCSI) BIOS setup utility and allows you to configure the SCSI subsystem for optimum use. You may need to run the SCSI BIOS setup utility when: ” You want to change the
  • MSI E7520 | User Manual - Page 59
    on the screen. AIC-7902 A at slot 0A 03:07:00 AIC-7902 B at slot 0A 03:07:01 Each item represents one SCSI channel (connector). The mainboard offers dual onboard SCSI channels: channel A & channel B. Move the cursor to the desired channel and then press . Selecting the Management Type The
  • MSI E7520 | User Manual - Page 60
    SCSI BIOS Setup AIC-7902 A at slot 0A, 03:07:00 Would you like to configure the SCSI controller, or run the SCSI Disk Utilities? Select the option and press . Options Configure/View SCSI Controller Settings SCSI Disk Utilities Configure/View SCSI Controller Settings Use this option for SCSI
  • MSI E7520 | User Manual - Page 61
    SCSI Controller Parity Use the field to enable or disable SCSI parity error checking function. If any of your SCSI devices does not support parity checking, disable this function. While disabling the function, you should disable disconnections for all devices, as parity checking for the reselection
  • MSI E7520 | User Manual - Page 62
    :07:00 Boot SCSI ID 0 Option Listed Below Has NO EFFECT if MULTI LUN Support is Disabled Boot LUN Number 0 Boot SCSI Controllers Select either SCSI channel A (AIC specify the boot logical unit number (LUN). If multiple LUN support is disabled, specifying a number here is useless. Setting options:
  • MSI E7520 | User Manual - Page 63
    Yes Send Start Unit Command Yes Yes Yes Yes Yes Yes Yes Yes BIOS Multiple LUN Support ......... No No No No No No No No Include in BIOS Scan Yes Yes Yes Start Unit Command Yes Yes Yes Yes Yes Yes Yes Yes BIOS Multiple LUN Support ......... No No No No No No No No Include in BIOS Scan Yes Yes
  • MSI E7520 | User Manual - Page 64
    up the SCSI device on-at-a-time during bootup, reducing the load on the computer's power supply. Setting options: [Yes], [No]. BIOS Multiple LUN Support Select [Yes] when any SCSI device has multiple logical units. Setting options: [Yes], [No]. Include in BIOS Scan Selecting [Yes] allows the SCSI
  • MSI E7520 | User Manual - Page 65
    the removable media drive designated as the boot device will be treated as a hard disk drive. When [All Disks] is selected, all removable media drives supported by the BIOS are treated as hard disk drives. If selecting [Disabled], no removable media drive is treated as a hard disk drive and the
  • MSI E7520 | User Manual - Page 66
    SCSI BIOS Setup Disk Utilities AIC-7902 A at slot 0A, 03:07:00 Select SCSI Disk and press SCSI ID#0: SCSI ID#1: SCSI ID#2: SCSI ID#3: SCSI ID#4: SCSI ID#5: SCSI ID#6: SCSI ID#7: SCSI ID#8: SCSI ID#9: SCSI ID#10: SCSI ID#11: SCSI ID#12: SCSI ID#13: SCSI ID#14: SCSI ID#15: No device No
  • MSI E7520 | User Manual - Page 67
    MS-9136 SSI Server Board Select the SCSI device which you want to manage by highlighting the item and press . The following dialog box appears. Select the function you want to perform. SCSI ID# 0: Firmware: Capacity: HITACHI DK32DJ-18MW G2G2 17GB Format Disk Verify Disk Media Format Disk
  • MSI E7520 | User Manual - Page 68
    Intel ICH-HR Appendix B: Adaptec SATA RAID Utility for Intel ICH-HR The southbridge ICH-HR provides a hybrid solution that combines two independent SATA ports for support your drive and improving the airflow inside your PC. 1. Supports 150 MB/s transfers with CRC error checking 2. Data handling
  • MSI E7520 | User Manual - Page 69
    and storage management software require approximately 20 MB of disk space. 4. Features Adaptec Embedded Serial ATA RAID Software RAID supports: RAID levels 0, 1, and simple volume using Adaptec's HostRAID technology. Operating system independent configuration and RAID creation using Adaptec RAID
  • MSI E7520 | User Manual - Page 70
    Adaptec SATA RAID Utility for Intel ICH-HR Adaptec RAID Configuration (ARC) Utility-Part of the controller's built-in BIOS code. You start ARC by pressing Ctrl+A during BIOS startup. For
  • MSI E7520 | User Manual - Page 71
    an array, press Ctrl-A when prompted to enter the ARC utility. For instructions on creating an array from the BIOS, see Adaptec RAID Configuration Utility. the system. 5. Press F6 when prompted to install a third-party driver. MSI Reminds You... When F6 is active, a prompt appears at the bottom of
  • MSI E7520 | User Manual - Page 72
    Intel ICH-HR 2. Installing the Driver in an Existing Windows System In this scenario, you are installing a driver in a system that already has a Windows operating system. To install the driver: 1. Create a driver disk by following the instructions of the driver file and yyy is the processor type. B-5
  • MSI E7520 | User Manual - Page 73
    , press Ctrl-A when prompted to enter the ARC utility. For instructions on creating an array from the BIOS, see Adaptec RAID Configuration When the SuSE Installation menu appears, press the Alt key, then select one option from the Menu and press Enter. 6. When prompted, insert the processor type. B-6
  • MSI E7520 | User Manual - Page 74
    Intel ICH-HR Installing Adaptec Storage Manager - Browser Edition 1. Overview This chapter discusses the installation procedure for installing Adaptec Storage Manager - Browser Edition to enable remote and local management of arrays. 2. Supported System Components, above. MSI Reminds You... When you
  • MSI E7520 | User Manual - Page 75
    Adaptec Storage Manager on Windows MSI Reminds You... When installing on a FAT 32 file system, the folder being installed is automatically hidden. To install Adaptec Storage Manager - Browser Edition: 1. Verify that a supported browser is installed. See Supported Browsers for details. 2. Insert the
  • MSI E7520 | User Manual - Page 76
    RAID Utility for Intel ICH-HR Configuring High security setting, you must enable the following settings manually: JavaScript Cookies (not stored) You do not need these settings: Active Scripting Allow per session cookies (not stored) MSI Reminds You... In Internet Explorer 6.0 there is no security
  • MSI E7520 | User Manual - Page 77
    -9136 SSI Server Board Configuring Netscape Navigator for Local Management MSI Reminds You... These instructions apply specifically to version 7 and may differ in later : 1. Choose Edit> Preferences > Advanced> Proxies > Manual proxy configuration > No Proxy For. 2. Type the managed system's IP address.
  • MSI E7520 | User Manual - Page 78
    Adaptec SATA RAID Utility for Intel ICH-HR 5. Installing Adaptec Storage Manager on Linux MSI Reminds You... When performing this Remove the product installation CD. Your computer must have a Web browser supporting JavaScript and cookies. To use Adaptec Storage Manager, you need to log on to
  • MSI E7520 | User Manual - Page 79
    Manager - Browser Edition to manage arrays. Once you are logged in, you will find convenient online help to guide you through the details of creating, configuring, and managing arrays. MSI Reminds You... Your controller may not support all of the features described. In most cases if a feature is not
  • MSI E7520 | User Manual - Page 80
    Adaptec SATA RAID Utility for Intel ICH-HR 2. Architecture Overview A locally managed system requires all of these components: A supported Web browser, which should already be installed on the system. The Adaptec Web service which supplies content displayed on the Web browser. An Adaptec-supplied
  • MSI E7520 | User Manual - Page 81
    installation process. For instructions see Installing a Security Certificate. You are asked to register your software. For instructions see Registering Your Software to the remote system is established, the System Login screen appears. MSI Reminds You... If you are using a proxy server to access the
  • MSI E7520 | User Manual - Page 82
    Utility for Intel ICH-HR 6. The Basics An example of a typical Adaptec Storage Manager - Browser Edition screen is shown below. MSI Reminds You... logged into Adaptec Storage Manager would not be displayed unless you manually rescan. The remaining buttons open additional windows that provide more
  • MSI E7520 | User Manual - Page 83
    view used when Adaptec Storage Manager is loaded, the display is the same in all three modes. If you change the display mode by selecting one of the other view buttons, a yellow arrow flashes to the left of any devices where the condensed display prevents omits information. An icon is always
  • MSI E7520 | User Manual - Page 84
    Adaptec SATA RAID Utility for Intel ICH-HR View is the default display mode and when expanded, will show the Each button opens a wizard for the corresponding function. Modify allows you to: Change an array from one RAID level to another Expand an array Change the stripe size for a RAID 0 B-17
  • MSI E7520 | User Manual - Page 85
    is used to display the arrays on this controller. It defaults to a condensed view of top-level arrays. MSI Reminds You... The Options button allows you to display second-level arrays if your controller supports them. In this condensed view, the RAID level of each device as well as whether it is
  • MSI E7520 | User Manual - Page 86
    Adaptec SATA RAID Utility for Intel ICH-HR Adaptec RAID Configuration Utility The Adaptec RAID associated with the array are displayed here. 5. Press Esc to return to the previous menu. Deleting Arrays MSI Reminds You... Back up the data on an array before you delete it. Otherwise, all data on
  • MSI E7520 | User Manual - Page 87
    the disk and press Delete. 5. Press Enter when both disks for the new array are selected. The Array Properties menu displays. Assigning Array Properties MSI Reminds You... Once the array is created and its properties are assigned, you cannot change the array properties using the ACU. Instead, use
  • MSI E7520 | User Manual - Page 88
    Adaptec SATA RAID Utility for Intel ICH-HR 4. Create RAID via allows you to select between the that you migrate or build an array on Windows dynamic disks (volumes), as it will result in data loss. MSI Reminds You... Do not interrupt the creation of a RAID 0 using the Migrate option. If you do,
  • MSI E7520 | User Manual - Page 89
    the controller must be initialized before they can be used in an array. MSI Reminds You... Initializing a disk overwrites the partition table on the disk and at the factory and do not need to be low-level formatted again. MSI Reminds You... Formatting destroys all data on the drive. Be sure to back
  • MSI E7520 | User Manual - Page 90
    RAID Utility for Intel ICH-HR Glossary A activity See task. ACU Array Configuration Utility. An application used to create, configure, and manage arrays from the controller's BIOS or MS-DOS. array A logical disk created from available space and made up of one or more segments on one or more physical
  • MSI E7520 | User Manual - Page 91
    place of a failed component only on the fault-tolerant array to which it is explicitly assigned. degraded A redundant (for example, a RAID 1) array in which one or more members have failed. The data is intact but redundancy has been compromised. Any further failure would cause the array to fail and
  • MSI E7520 | User Manual - Page 92
    Adaptec SATA RAID Utility for Intel ICH-HR drive LED Disk indicator LED that illuminates during new component while the power is on and the system is running. I impacted An impacted array is one which has been created but for some reason the initial build operation did not complete. All member drives
  • MSI E7520 | User Manual - Page 93
    connected to the controller. The controller manages the disk as a legacy disk array where there is a one-to-one logical-to-physical mapping of array to disk. logical device Volume comprised of space from one or more physical drives and presented to the operating system as if it were a single storage
  • MSI E7520 | User Manual - Page 94
    Adaptec SATA RAID Utility for Intel ICH-HR Q quick init An array initialized using the Quick regeneration of redundant data on a RAID 1. redundant The ability of an array to maintain operability when one or more hardware failures occur. RAID 1 is redundant. In the event of a drive failure, redundant
  • MSI E7520 | User Manual - Page 95
    MS-9136 SSI Server Board single-level array Array created from one or more segments. See also volume, spanned volume, RAID 0, RAID 1. snapshot Instantaneous read-only copy of an array at a precise point in time. spanned volume A
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
English Version
G52-S9136X1
MS-9136 SSI Server Board
E7520 Master Series