Mackie CR1604 Contractor's Specs Adon
Mackie CR1604 Manual
 |
View all Mackie CR1604 manuals
Add to My Manuals
Save this manual to your list of manuals |
Mackie CR1604 manual content summary:
- Mackie CR1604 | Contractor's Specs Adon - Page 1
channel trim controls s Phantom power s Forms single structural unit with mixer MixerMixer s Combines all outputs of 2 or 3 CR-1604s s No loss of inputs s Internal power supply Remote Fader (add-on to MixerMixer) s Controls master output of up to 3 CR-1604s s Precision 100mm design RotoPod - Mackie CR1604 | Contractor's Specs Adon - Page 2
on all mixers. MixerMixer remote fader mains, AUX and headphone outputs from THREE 16-ch. mixers CR-1604#1 CR-1604#2 CR-1604#3 The MixerMixer solves this problem, combining all outputs from up to three mixers and providing a new set of combined outputs. For example, three Mackie Designs CR-1604 - Mackie CR1604 | Contractor's Specs Adon - Page 3
. The Mackie Designs RotoPod is a steel bracket/ rack combination that supports the CR-1604 16-channel Mic/Line Mixer's jack panel so the connectors can be on the same plane as the main controls. Adding the RotoPod converts the CR-1604 from a 7-rack-space mixer with CR-1604 in RotoPod configuration - Mackie CR1604 | Contractor's Specs Adon - Page 4
10 rack spaces 16.1" 9.25" 19.0" 0.7" 16.1" 3.8" 4.5" 5.9" 6.6" Jacks to top with XLR10 5.9" 4.8" 6.6" 5.5" 18.2" 0.5" Note: RotoPod rack rail places mixer flush with 1.5" bottom rack space, allows gap at top for cables.1.6" 15.8" 11 rack spaces 18.2" 15.8" 12.7" RotoPod (jacks on
-
1 -
2 -
3 -
4
 |
 |
7/1/95
RELATED PRODUCTS
MORE INFORMATION
FEATURES
XLR10•MIXERMIXER•ROTOPOD•REMOTE FADER
CR-1604 MIC/LINE MIXER
CR-1604 ADD-ON ARCHI-
TECTS’ & ENGINEERS’ SPECS
“IN YOUR FACE”
ALL-PRODUCT BROCHURE
Unlike any other 16-chan-
nel compact mixer, the
CR-1604 is part of a mixing
system. The enhancements
presented here give you
unprecedented flexibility in
tailoring a mixer to a job.
Conversely, you need only
specify what is required for
a project without adding
costs for extraneous fea-
tures that won’t be used.
Then, at any time in the
future, the basic CR-1604
can be expanded, as the
users’ needs change.
The XLR10
adds ten additional
discrete, studio-grade phan-
tom-powered mic preamps
to the CR-1604 16-channel
Mic/Line Mixer for a total of
16 mic inputs.
The XLR10 module
mounts directly to the bot-
tom of the CR-1604 Input/
Output Pod and becomes
an integral part of the
mixer itself. Installation
requires just a few minutes
and a screwdriver. Elec-
tronic connections are via
an integral ribbon cable
connector already inside
the CR-1604.
The XLR10’s preamps use
the same exceptionally high-
quality design that has distin-
guished the CR-1604 mixer.
In creating both units, we
have developed a rigorous
definition of what a Mic
Preamp should be, based on
the technical specifications
that PA, permanent install
and recording studio applica-
tions require of larger boards.
Instead of simple, two-
transistor op-amp
combinations
found in most
other small
mixers, the
XLR10
preamp uses
four conjugate-
pair transistors with
large-emitter geometry to
reduce distortion at all levels
and deliver extremely low
noise (our published specs
of –129.5 dBm E.I.N. @150
ohms, bandwidth of 10Hz to
300kHz and 0.001% distor-
tion are real and verifiable).
XLR10 docking to CR-1604
XLR10 attached to CR-1604
XLR10
■
Adds 10 more high
quality mic preamps to
the CR-1604
■
Individual channel
trim controls
■
Phantom power
■
Forms single structural
unit with mixer
MixerMixer
■
Combines all outputs of 2
or 3 CR-1604s
■
No loss of inputs
■
Internal power supply
Remote Fader
(add-on to MixerMixer)
■
Controls master output of
up to 3 CR-1604s
■
Precision 100mm design
RotoPod
■
Rotates CR-1604 input/
output pod so that jacks
are on same plane as
controls
XLR10 EXPANDER
®