Mackie ProFX4v2 Owners Manual

Mackie ProFX4v2 Manual

Get Mackie ProFX4v2 PDF manuals and user guides View all Mackie ProFX4v2 manuals
Add to My Manuals
Save this manual to your list of manuals

Mackie ProFX4v2 manual content summary:

  • Mackie ProFX4v2 | Owners Manual - Page 1
    OWNER'S MANUAL 48V
  • Mackie ProFX4v2 | Owners Manual - Page 2
    ProFX4v2 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply the effective
  • Mackie ProFX4v2 | Owners Manual - Page 3
    Important Safety Instructions 2 Contents 3 Features 3 Introduction 4 How To Use This Manual 4 Things To Remember 4 Getting Started 4 Hookup Diagrams 5 ProFX4v2 Rear Panel Features 7 1. Power Connection 7 2. Power Switch 7 ProFX4v2 Front Panel Features 8 Connections and Channel Strip
  • Mackie ProFX4v2 | Owners Manual - Page 4
    of your live mix. How to Use This Manual: After this introduction, a getting started guide will help you get things set up fast. The hookup diagrams show some typical setups, while the remaining sections provide details of the ProFX4v2 mixer. This icon marks information that is critically important
  • Mackie ProFX4v2 | Owners Manual - Page 5
    station is attached to the stereo tape inputs. Thump15 powered speakers are connected to the left and right main output. Two of these speakers are also set up as stage monitors and connect to the mixer's monitor output. The aux mon controls of each channel allow you to create a stage monitor mix as
  • Mackie ProFX4v2 | Owners Manual - Page 6
    is connected to the channel 2 XLR input for vocals and a drum machine is attached to the channel 3-4 line-level inputs. MR8mk3 powered reference monitors are connected to record the 2-channel main mix to the DAW, as well as play back two channels from the DAW. 6 ProFX4v2 Typical Recording System
  • Mackie ProFX4v2 | Owners Manual - Page 7
    unplug the AC adaptor from the mixer and the mains supply. As a general guide, you should turn on the mixer first, before any external power amplifiers or powered speakers, and turn it off last. This will reduce the possibility of any turn-on, or turn-off thumps in your speakers. Owner's Manual 7
  • Mackie ProFX4v2 | Owners Manual - Page 8
    them. Each channel works independently and just controls the signals plugged into the inputs directly above them. 3. Mic Inputs ProFX4v2 mixers use 3-pin the market today. Phantom Power Most modern professional condenser mics require 48V phantom power which lets the mixer send low-current DC
  • Mackie ProFX4v2 | Owners Manual - Page 9
    Owner's Manual 5. Line Inputs / Hi-Z Input (Channel 1 Only) In addition to accepting balanced mic or line-level signals using an XLR connector, ProFX4v2 mixers may also accept 1/4" line-level signals driven by balanced or unbalanced sources. These 1/4" jacks share circuitry (but not phantom power)
  • Mackie ProFX4v2 | Owners Manual - Page 10
    channels are distorting, check the level set LEDs. If they are on continuously, turn down the gain. 2-Band Equalization The ProFX4v2 it helps to conserve amplifier power. Another way to consider can really benefit voices. Trouble is, adding low EQ also cut r­ emoves all those problems, so you can add
  • Mackie ProFX4v2 | Owners Manual - Page 11
    Owner's Manual 12. Aux Mon These knobs tap a portion of each channel's signal to set up a nice monitor mix feeding stage monitors, independent of the main mix. Adjust these controls on each channel until the band is happy with the stage monitor mix. The controls are off when fully turned down,
  • Mackie ProFX4v2 | Owners Manual - Page 12
    between this output and your powered monitors. This will allow you channel faders will also affect the level going to the external processor. The processed output from the effects processor is usually returned to a spare channel Phones This 1/4" TRS connector supplies the output to stereo headphones.
  • Mackie ProFX4v2 | Owners Manual - Page 13
    . The EQ section comes before the main mix level and meters. As with the channel EQ, just take it easy. There is a large amount of adjustment, and if from nearby microphones. Most modern professional condenser mics require 48V phantom power, which lets the mixer send lowcurrent DC voltage to the
  • Mackie ProFX4v2 | Owners Manual - Page 14
    , as well as the channel FX sends. 29. Int FX Mute Switch and LED When engaged, the internal effects processor is muted, and its output will not appear on the main mix or monitor mix. The adjacent mute LED will illuminate as a reminder that the effects are muted. When power is first applied, this
  • Mackie ProFX4v2 | Owners Manual - Page 15
    Owner's Manual Phones, Mon, Tape and Main Mix 32. Phones As one might expect, this the levels of ­the main mix signals sent to the main outputs. This gives you the ultimate feeling of power and control over the sound levels sent to your audience. Adjust this control carefully, with your good eye
  • Mackie ProFX4v2 | Owners Manual - Page 16
    ProFX4v2 Appendix A: Service Information If you think your mixer has a problem, please check out the following troubleshooting tips and do your best to confirm the problem. Visit the Support section of our website (www.720trees.com) where you will find lots of useful information such as FAQs,
  • Mackie ProFX4v2 | Owners Manual - Page 17
    Channel to Tape Output Monitor Send FX Send Stereo Line Input Channel to Tape Output Monitor Send FX Send Tape Input to Main Output USB Mic in to Main out, max gain, 1 kHz 70 dB Digital Effects I/O Mono Input, Stereo Output Number of Presets 16 Maximum Levels All
  • Mackie ProFX4v2 | Owners Manual - Page 18
    ProFX4v2 Specifications continued... Phantom Power 48 VDC to all Mic channels simultaneously Power Requirements Class I Hard-Wired Wall Wart 12VDC @ 1.5A Physical Dimensions and Weight Height Width any updates to this manual: www.720trees.com. ©2015 LOUD Technologies Inc. All Rights Reserved
  • Mackie ProFX4v2 | Owners Manual - Page 19
    Owner's Manual ProFX4v2 Dimensions 2.9 [73] 48V 10.1 [256] Weight 3.2 lb 1.4 kg 8.7 [220] Owner's Manual 19
  • Mackie ProFX4v2 | Owners Manual - Page 20
    ProFX4v2 20 Global 48v 48V Switch/LED Phantom Power Mic Line / Hi-Z Phantom Power (To All Mics) Level Set Low Cut In Line / Hi-Z + - Mic: 0 ~ +50dB Line: -20 ~ +30dB Gain HPF 100 Hz Mono Channel 1 LO HI 80 12K 2-Band EQ Fader Phantom Power Mic Line Gain Level Set Low Cut In + - Mic
  • Mackie ProFX4v2 | Owners Manual - Page 21
    Owner's Manual ProFX4v2 Track Sheet 48V Owner's Manual 21
  • Mackie ProFX4v2 | Owners Manual - Page 22
    ProFX4v2 Appendix C: Table of Effects Presets No. Title 01 Bright Room 02 Warm Lounge , just enough enhancement of the lower mids to produce a more "wet" sound, or for giving dimension to warm tone. bright horns without adding harshness. This preset simulates the sound of a small concert stage
  • Mackie ProFX4v2 | Owners Manual - Page 23
    Owner's Manual ProFX4v2 Series conform to the warranty then LOUD or its authorized service representative will at its option, either repair or be bound thereby. Need help with your mixer? • Visit www.720trees.com and click Support to find: FAQs, manuals, addendums, and other useful information. •
  • Mackie ProFX4v2 | Owners Manual - Page 24
    16220 Wood-Red Road NE Woodinville, WA 98072 • USA Phone: 425.487.4333 Toll-free: 800.898.3211 Fax: 425.487.4337 www.720trees.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
OWNER’S MANUAL
48V