Mackie Thump TH15A Owners Manual
Mackie Thump TH15A Manual
 |
View all Mackie Thump TH15A manuals
Add to My Manuals
Save this manual to your list of manuals |
Mackie Thump TH15A manual content summary:
- Mackie Thump TH15A | Owners Manual - Page 1
5) " owner's manual - Mackie Thump TH15A | Owners Manual - Page 2
SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS maintenance (servicing) instructions in servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power - Mackie Thump TH15A | Owners Manual - Page 3
.tapcoworld.com for more information about this and other TAPCO products. What me, read a manual? Before you begin, please make sure you read the Safety Instructions on page 2 and Getting Started on page 4. Your new TAPCO® TH-15A active loudspeakers are designed to set up quickly and operate easily - Mackie Thump TH15A | Owners Manual - Page 4
the Safety Instructions on page 2 for information on hearing protection. • When you shut down your equipment, turn off the TH-15A loudspeakers first to prevent thumps and other noises generated by any upstream equipment from coming out the speakers. When powering up, turn on the TH-15As last. • Save - Mackie Thump TH15A | Owners Manual - Page 5
Introduction Thank you for choosing the TAPCO TH-15A active loudspeakers. The TAPCO product line hails back to the days of TAPCO Corporation, Greg Mackie's first company. TAPCO revolutionized the audio industry back in 1969 with the very first 6-channel mixer specifically designed for keyboards and - Mackie Thump TH15A | Owners Manual - Page 6
+15 U LOW 80Hz LEVEL U -15 +15 MAX OUT IN TH-15A ACTIVE LOUDSPEAKER EQ U HIGH 12kHz -15 +15 MID FREQ DIRECT EQ POWER O 100 8k U OL MID -15 +15 U LOW 80Hz LEVEL U -15 +15 MAX OUT IN Daisy-Chaining Two Speakers Per Side TH-15A POWER O EQ U HIGH 12kHz -15 +15 MID FREQ DIRECT - Mackie Thump TH15A | Owners Manual - Page 7
PA System with two TH-18s active subwoofers TH-15A ACTIVE SOUND REINFORCEMENT LOUDSPEAKER POWER O EQ HIGH 12kHz -15 +15 DIRECT EQ 100 8k U OL MID -15 +15 U LOW 80Hz LEVEL U -15 +15 MAX OUT IN Right Main Powered Loudspeaker (TAPCO TH-15A) Left Main Powered Loudspeaker (TAPCO TH-15A - Mackie Thump TH15A | Owners Manual - Page 8
TAPCO TH-15A Features REAR PANEL DESCRIPTION TH-15A ACTIVE SOUND REINFORCEMENT LOUDSPEAKER 10 POWER O 5 7 8 EQ U HIGH 12kHz -15 +15 MID FREQ 9 DIRECT from your TH-15As. If the OL indicator is blinking frequently or lighting continuously, turn down the LEVEL control [3] on the TH15A or turn - Mackie Thump TH15A | Owners Manual - Page 9
switch to turn the active loudspeakers on and off. The indicating LED above the POWER switch lights when the POWER switch is on and AC power is available at the linecord socket. A second power indicator is located on the EQ controls can be used to tailor the frequency response of the TH-15As. - Mackie Thump TH15A | Owners Manual - Page 10
audio signal. You can purchase quality cables from your Mackie dealer. Placement The TH-15A loudspeaker is designed to sit on the floor or stage. It can be pole-mounted via the built-in socket on the bottom of the cabinet. Be sure the pole is capable of supporting the weight of the TH-15A. WARNING - Mackie Thump TH15A | Owners Manual - Page 11
Talk To Us" section of our website (www.tapcoworld. com) to contact our technical support heroes and get some ideas. You may find the answer to the problem without having to send your TAPCO product away. Troubleshooting No Power • Our favorite question: Is it plugged in? • Make sure the line cord is - Mackie Thump TH15A | Owners Manual - Page 12
Noise/Hum • Check the signal cable between the mixer and the loudspeaker. Make sure all connections are secure. These problems usually produce crackling noises or hum. • If you are using two or more TH-15A active loudspeakers, try plugging them all into the same AC outlet panel or outlet strip. The - Mackie Thump TH15A | Owners Manual - Page 13
referenced to 138 watts into 8 ohms Design: BTL Class D High Frequency Power Amplifier Rated Power: 50 watts, 4 ohm load 99 watts peak THD: - Mackie Thump TH15A | Owners Manual - Page 14
TH-15A Dimensions 27.1 in/ 689 mm O 16.8 in/ 427 mm 15.8 in/ 401 mm 16.8 in/ 427 mm 6.1 in/ 155 mm 14 Correct Disposal of this about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service. - Mackie Thump TH15A | Owners Manual - Page 15
pay the full amount stated in the invoice to satisfy your debt. 3. Repair: When you call TAPCO Technical Support, explain the problem and obtain a Service Request Number. Have your TAPCO product's serial number ready. You must have a Service Request Number before you can obtain factory-authorized - Mackie Thump TH15A | Owners Manual - Page 16
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
owner’s manual