Maytag MED6200KW Quick Reference Sheet
Maytag MED6200KW Manual
 |
View all Maytag MED6200KW manuals
Add to My Manuals
Save this manual to your list of manuals |
Maytag MED6200KW manual content summary:
- Maytag MED6200KW | Quick Reference Sheet - Page 1
of the following items, the full cycle guide, detailed product dimensions, or for complete instructions for use and installation, please visit https://www.maytag.com/owners, or in Canada https://www.maytag.ca/owners. This may save you the cost of a service call. Step 4. Select Cycle and Settings - Maytag MED6200KW | Quick Reference Sheet - Page 2
Guide de programmes complet et dimensions détaillées du produit ou pour obtenir des instructions complètes sur l'utilisation et l'installation, visiter le https://www.maytag Wrinkle AJOUTER UN PLAN Prevent Hold to Start DE SERVICE PRENDRE RENDEZ-VOUS FILTRES RABAIS ET PROMOTIONS Temp . Time
-
1 -
2
 |
 |
OPERATING INSTRUCTIONS
WARNING
: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in
your appliance’s Owner’s Manual, before operating this appliance.
Step 1. Clean Lint Screen
Step 2. Load Clothes; then Close
Door
Step 3. Press Power Button
Step 4. Select Cycle and Settings
Step 5. Press, Hold, & Release
“Hold to Start” Button
More Dry
Heavy Duty
Air Only
Timed Dry
Quick Dry
Less Dry
Delicates
Bulky Items
Towels
Wrinkle Control
Normal Dry
Timed Cycles
High
Med
Ex Low
Low
90
60
15 min
30
Wrinkle
Prevent
Wet
Sense
Cool
Done
Temp
Options
Time
Cycle Guide – Normal Cycle
SENSOR DRY
-
Senses moisture in the load or air temperature and shuts off when the load reaches
the selected dryness level.
Not all cycles and settings are available on all models.
Items to Dry:
Cycle:
Temperature:
Description:
Jeans, heavy
work clothes,
towels
Heavy Duty
High
Medium
Low
Extra Low
Automatic cycles give the best
drying in the shortest time. Drying
time varies based on fabric type,
load size, and dryness setting.
Select a drying temperature based
on the fabrics in your load. If you
are unsure of the temperature
to select for a load, select the
lower setting rather than the higher
setting.
Work clothes,
medium-weight
fabrics, sheets
Normal Dry
High
Medium
Low
Extra Low
Casual, shirts,
pants, lightweight
items, synthetics,
delicates,
athletic-wear
Wrinkle Control
High
Medium
Low
Extra Low
NOTE
: This clothes dryer’s, Government energy certifications were based on the Timed Dry Cycle,
and Maximum Drying Temperature Setting. The as - shipped defaults of Normal Dryness, Wrinkle
Prevent Off, were used.
NOTE
: If loads do not seem as dry as you would like, select More Dry the next time you dry a similar
load. If loads seem drier than you like, select Less Dry the next time you dry a similar load.
Online Ordering Information
For detailed installation instruction and maintenance information, winter storage, and transportation
tips, please see the Owner’s Manual included with your machine.
For information on any of the following items, the full cycle guide, detailed product dimensions, or
for complete instructions for use and installation, please visit
, or in
Canada
. This may save you the cost of a service call.
Dryer Quick Start Guide
United States:
1–800–344–1274
Maytag Brand Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
Canada:
1
–800–688–2002
Maytag Brand Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7
Button Descriptions
1. POWER
Press “Power” button to turn on/off or to stop/cancel a cycle.
2. CYCLE KNOB
Turn knob to select desired cycle.
When using an Automatic Dry cycle the sensors will monitor
moisture and heat levels and automatically stop the cycle at the
right time.
When using a Timed Cycle, the length of time for the cycle to run
by pressing the Time button (15, 30, 60, and 90 minutes).
See online “Cycle Guide” for detailed
cycle descriptions.
3. START/PAUSE
Press, hold, and release the “Hold to Start” button to start the
cycle.
Press during a cycle to pause it. Press, hold, and
release to resume cycle.
4. STATUS INDICATOR LIGHTS
Monitors and displays the cycle progress from Sensing to Done.
5. CYCLE OPTIONS AND MODIFIERS
TEMPERATURE
Press “Temp” Button to modify the cycle’s available temperature.
(Extra Low, Low, Medium, and High)
TIME
(Air Only, Timed Dry, and Quick Dry Cycles only)
Press “Time” Button to modify the time for the times cycle between
15, 30, 60, and 90 minutes.
WRINKLE PREVENT
Press “Options” Button to turn on/off the wrinkle prevent option.
Wrinkle prevent adds up to 150 minutes of periodic tumbling and
heat to help reduce wrinkles.
CYCLE SIGNAL
Press “Cycle Signal” Button to turn the signal indicating the end of
drying cycle on and off.
Not all features, cycles, and options are available on all models. Appearance may vary.
REGISTER
PRODUCT
MANUALS &
DOWNLOADS
TROUBLESHOOTING
& FAQ
REPLACEMENT PARTS
ADD SERVICE PLAN
SCHEDULE SERVICE
FILTERS
REBATE & PROMOS
However, if you need to contact us, use the information listed below for the appropriate region
.
High
Med
Ex Low
Low
90
60
15 min
30
Wrinkle
Prevent
Wet
Sense
Cool
Done
More Dry
Heavy Duty
Air Only
Timed Dry
Quick Dry
Less Dry
Delicates
Bulky Items
Towels
Wrinkle Control
Normal Dry
Hold to Start
Temp
Options
Cycle
Signal
Time
Timed Cycles
1
3
2
5
4