Maytag MES8800FZ Dimension Guide
Maytag MES8800FZ Manual
 |
View all Maytag MES8800FZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Maytag MES8800FZ manual content summary:
- Maytag MES8800FZ | Dimension Guide - Page 1
an extension cord. To properly install your range, you must determine the type of electrical connection you will be using and follow the instructions provided for it here. ■■ Range must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating plate - Maytag MES8800FZ | Dimension Guide - Page 2
cm) countertop height. IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface. Range may be installed next to combustible walls with zero
-
1 -
2
 |
 |
PRODUCT MODEL NUMBERS
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Because Whirlpool Corporation includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Ref. W10665255B
05/23/2016
30" (76.2 cm) Freestanding Electric Range
MES8880D
MES8800F
Electrical:
If codes permit and a separate ground wire is used, it is
recommended that a qualified electrical installer determine that the
ground path and wire gauge are in accordance with local codes.
Do not use an extension cord.
To properly install your range, you must determine the type of electrical
connection you will be using and follow the instructions provided for it
here.
■
Range must be connected to the proper electrical voltage and
frequency as specified on the model/serial number rating plate. The
model/serial rating plate is located behind the oven door on the top
right-hand side of the oven frame.
■
This range is manufactured with the neutral terminal connected to
the cabinet. Use a 3-wire, UL listed, 40- or 50-amp power supply
cord (pigtail) (see following Range Rating chart). If local codes do
not permit ground through the neutral, use a 4-wire power supply
cord rated at 250 volts, 40 or 50 amps and investigated for use with
ranges.
PRODUCT DIMENSIONS
B
D
A
F
E
C
A. 1
3
/
16
" (3.0 cm) height from
cooktop to top of vent
B. 29
7
/
8
" (75.9 cm)
C. Model/serial number plate
(located behind the oven door
on the top right-hand side of
the oven frame)
D. 36" (91.4 cm) height to top of
cooktop edge with leveling legs
screwed all the way in*
E. 28
5
/
16
" (71.9 cm) max. depth
from front of console to back of
range.
F. 28
7
/
8
" (73.3 cm) max. depth
from handle to back of range.
IMPORTANT:
Range must be level after installation. Follow the
instructions in the “Level Range” section. Using the cooktop as a
reference for leveling the range is not recommended.
* Range can be raised approximately 1" (2.5 cm) by adjusting the
leveling legs.
* The NEC calculated load is less than the total connected load listed on
the model/serial rating plate.
** If connecting to a 50-amp circuit, use a 50-amp rated cord with kit. For
50-amp rated cord kits, use kits that specify use with a nominal 1
3
/
8
"
(34.9 mm) diameter connection opening.
■
A circuit breaker is recommended.
Range Rating*
Specified Rating of Power
Supply Cord Kit and Circuit
Protection
120/240 Volts
120/208 Volts
Amps
8.8 - 16.5 KW
7.8 - 12.5 KW
40 or 50**
16.6 - 22.5 KW
12.6 - 18.5 KW
50
This manual covers several models. Your model may appear different
from the models depicted. Dimensions given are maximum dimensions
across all models.