Maytag MGD5500FC Dimension Guide
Maytag MGD5500FC Manual
 |
View all Maytag MGD5500FC manuals
Add to My Manuals
Save this manual to your list of manuals |
Maytag MGD5500FC manual content summary:
- Maytag MGD5500FC | Dimension Guide - Page 1
PRODUCT MODEL NUMBERS MGD3500F, MGD5500F, MGD8200F Front view: 27" (686 mm) 383/4" Min. (984 mm) 39" Max. (990 mm) Gas Dryer Side view: Bottom view: Back view: 61/4" (159 mm) Recommended Installation Spacing: 53/4"* (146 mm) Water inlet (Steam Models Only) Vent 297/8"* (759 mm) 31/2"* (89 mm) - Maytag MGD5500FC | Dimension Guide - Page 2
action of L.P. gas must be used. An individual manual shutoff valve must be installed within 6 ft (1.8 m) of the dryer in accordance with the National Fuel Gas Code ANSI Z223.1. . For complete details, see Installation Instructions packed with product. Specifications subject to change without notice
-
1 -
2
 |
 |
Gas Dryer
PRODUCT MODEL NUMBERS
Front view:
Side view:
Back view:
Recommended Installation Spacing:
W10775221A
12/2015
MGD3500F, MGD5500F, MGD8200F
Bottom view:
27"
(686 mm)
38
3
/
4
" Min.
(984 mm)
39" Max.
(990 mm)
6
1
/
4
"
(159 mm)
29
7
/
8
"*
(759 mm)
3
1
/
2
"*
(89 mm)
5
3
/
4
"*
(146 mm)
6
1
/
8
"*
(156 mm)
14
3
/
8
"
(365 mm)
25
3
/
4
"
(654 mm)
3
/
4
"*
(18 mm)
NOTE:
Most installations require a minimum of 5" (127 mm)
clearance behind dryer for exhaust vent with elbow. See
“Venting Requirements.”
18" min.
(457 mm)
1"
(25 mm)
5"
(127 mm)
24 in.
2
min.
(155 cm
2
)
48 in.
2
min.
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
Installation spacing for recessed area or closet installation
All dimensions show recommended and minimum spacing allowed.
Additional spacing should be considered for ease of installation and servicing.
Additional spacing should be considered on all sides of the dryer to reduce noise transfer.
For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are
required. Louvered doors with equivalent ventilation openings are acceptable.
Companion appliance spacing should also be considered.
Gas
Water inlet
(Steam Models Only)
Vent