Maytag MMW9730FZ Dimension Guide
Maytag MMW9730FZ Manual
 |
View all Maytag MMW9730FZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Maytag MMW9730FZ manual content summary:
- Maytag MMW9730FZ | Dimension Guide - Page 1
COMBINATION PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS MMW7730D MMW9730F Product Dimensions 27" (68.6 cm) and 30" (76.2 cm) Ovens ELECTRICAL CONNECTION To properly install your oven, you must determine the type of electrical connection you will be using and follow the instructions provided for - Maytag MMW9730FZ | Dimension Guide - Page 2
16" (105 cm)* recommended cutout height G. 24" (60.7 cm) cutout depth 30" (76.2 cm) models A. 30" (76.2 cm) min. cabinet width B. 1" (2.5 cm) top of cutout to bottom of without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product
-
1 -
2
 |
 |
PRODUCT MODEL NUMBERS
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Because Whirlpool Corporation includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Ref. W10696163
05/20/2016
Page 1 of 1
MMW7730D
27" (68.6 CM) AND 30" (76.2 CM) ELECTRIC BUILT-IN
MICROWAVE/OVEN COMBINATION
PRODUCT DIMENSIONS
Product Dimensions
27" (68.6 cm) and 30" (76.2 cm) Ovens
MMW9730F
ELECTRICAL CONNECTION
To properly install your oven, you must determine the type of electrical
connection you will be using and follow the instructions provided for it
here.
■
Oven must be connected to the proper electrical voltage, amperage,
and frequency as specified on the model/serial number rating plate.
See the following illustration.
A. Model/serial number plate
■
Models rated from 7.3 to 9.6 kW at 240 volts (5.5 to 7.2 kW at 208
volts) require a separate 40-amp circuit. Models rated at 7.2 kW and
below at 240 volts (5.4 kW and below at 208 volts) require a separate
30-amp circuit.
■
A circuit breaker is recommended.
■
If the house has aluminum wiring, follow the procedure below:
1.
Connect a section of solid copper wire to the ends of the flexible
conduit leads.
2.
Connect the aluminum wiring to the added section of copper wire
using special connectors and/or tools designed and UL listed for
joining copper to aluminum.
Follow the electrical connector manufacturer’s recommended
procedure. Aluminum/copper connection must conform with local
codes and industry accepted wiring practices.
For power requirements, refer to the following table.
Model
Voltage
Amperage
(L1)*
Amperage
(L2)*
Rating
(kW)
MMW9730
120/240
129/208
30
28
15
15
7.2
5.9
* L1 includes both the microwave and the oven, and L2 includes only
the oven. Amperage values noted above are for information purposes
only: The units are rated in watts.
27" (68.6 cm) models
A. 42
9
⁄
16
" (108.0 cm) overall height
B. 25
7
⁄
16
" (64.6 cm) recessed width
C. 41" (104.1 cm) recessed height
D. 23¹⁄
4
" (59.1 cm) max. recessed
depth
E. 27" (68.6 cm) overall width
F. 48" (121.9 cm) Flexible conduit
length measured from the
conduit clamp located at the
rear of the oven. Do not remove
the conduit clamp.
30" (76.2 cm) models
A. 42
9
⁄
16
" (108.0 cm) overall height
B. 28¹⁄
2
" (72.3 cm) recessed width
C. 41" (104.1 cm) recessed height
D. 23¹⁄
4
" (59.1 cm) max. recessed
depth
E. 30" (76.2 cm) overall width
F. 48" (121.9 cm) Flexible conduit
length measured from the
conduit clamp located at the
rear of the oven. Do not remove
the conduit clamp.
A
B
A
C
D
E
F