Miele Classic G 4286 SCSF Operating and Installation manual
Miele Classic G 4286 SCSF Manual
View all Miele Classic G 4286 SCSF manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele Classic G 4286 SCSF manual content summary:
- Miele Classic G 4286 SCSF | Operating and Installation manual - Page 1
Operating Instructions Dishwasher G 4281 G 4286 To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M.-Nr. 09 510 200 - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 2
Contents IMPORTANT SAFETY INSTRUCTIONS 4 Guide to the dishwasher 7 Control panel 8 Caring for the environment 9 Energy saving washing 9 Before using for the first time 10 To open the door 10 To - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 3
Questions 37 Technical faults 37 Faults in the water intake or water drain 38 General problems with the dishwasher 39 Noises 40 Poor cleaning results 41 After sales service 44 User Maintenance Instructions 45 Cleaning and Care 46 Triple filter system 47 Cleaning the drain pump and non - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 4
as specified in these operating instructions, for cleaning domestic cookware and cutlery. Any other usage is not supported by the manufacturer and could be Consult a qualified electrician if in doubt. ~ Before installation or service, disconnect the power supply to the work area by unplugging the - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 5
with the installation instructions. ~ Installation and repair work should be performed by a Miele authorized service technician. Work . A damaged appliance is dangerous. Unplug the machine and contact Miele Technical Service Department. ~ Ensure that any plastic wrappings, bags, etc. are disposed - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 6
IMPORTANT SAFETY INSTRUCTIONS Use ~ To reduce the risk of injury, do not allow children to play in, on or near the dishwasher. It is possible for and will not be used, remove the doorlock to the wash cabinet to prevent children from locking themselves in the machine. SAVE THESE INSTRUCTIONS 6 - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 7
Guide to the dishwasher a Upper spray arm (not visible) b Cutlery tray c Upper basket d Middle spray arm e Air inlet for drying (depending on model) f Lower spray arm g Triple filter system h Data plate i Rinse aid reservoir j Dual compartment detergent dispenser 7 - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 8
Guide to the dishwasher Control panel a Check / Refill indicators b Time display c , button with indicator light (Delay start) d Turbo button with indicator light e Program selection f Program button g K button (On/Off) with indicator light This operating instruction manual describes several - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 9
Caring for the environment Energy saving washing This dishwasher is economical in the use of water and electricity. For best results follow these tips: ^ For lowest energy consumption you may connect the dishwasher to a cold water source. ^ Make full use of the baskets' capacity without overloading - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 10
Before using for the first time To open the door To close the door ^ Push the baskets in. ^ Lift the door and push until it clicks into position. ^ Pull the handle to open the door. If the door is opened during operation, the dishwasher will stop running. Once the door is closed the program will - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 11
Before using for the first time Rinse aid Rinse aid is needed to prevent spotting on dishes and glassware. The rinse aid is filled in the reservoir and the set amount will be automatically dosed. ,Filling the rinse aid reservoir with detergent will damage the reservoir. Only pour rinse aid - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 12
Before using for the first time Deactivating refill indicators If you consistently use Tab detergents, you can deactivate the refill indicator if you wish. The flashing in the time display indicates whether the refill indicators are activated or not. - "p 1": refill indicators are activated ^ - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 13
Before using for the first time Setting the rinse aid dosage You can adjust the rinse aid dosage to optimize the results. The rinse aid dosage can be set at levels between 0 and 6 ml. The factory setting is 3 ml of rinse aid. This is just a recommendation. If the dishes are spotty: ^ Use a higher - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 14
contact with food dyes. ^ The spray arms must not be blocked by items that are too tall or hang through the baskets. Check clearance by manually rotating the spray arms. ^ Place very small items in the cutlery tray or basket so they do not fall to the bottom of the wash - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 15
Loading the dishwasher Items not recommended for dishwashing - Cutlery with wooden handles - Wooden cutting boards - Glued items such as old knives with handles glued together around the shank of the blade - Handmade craft items, antique, metal trimmed or decorative glassware - Plastic items that - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 16
Loading the dishwasher Typical load for 10 place settings with cutlery tray Upper basket Lower basket Cutlery tray 16 - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 17
Loading the dishwasher Typical load for 16 place settings with cutlery tray Upper basket Lower basket Cutlery tray 17 - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 18
Loading the dishwasher Upper basket ,Always use the dishwasher with the upper and lower basket in place. Adjustable cup rack (depending on model) ^ Raise the rack to make room for tall glasses. Glasses can also be leaned against the cup rack so they are more stable. ^ Lower it to double stack - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 19
Loading the dishwasher Adjusting the upper basket To adjust the upper basket downwards: In order to gain more space for taller items the upper basket can be adjusted on three levels with 2 cm between each level. The upper basket can also be set at an angle with one side high and the other side - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 20
Loading the dishwasher Lower basket ^ Place larger and heavier items such as plates, serving platters, saucepans, bowls, etc. in the lower basket. It can also be used for glasses, cups, small plates and saucers. Heavily soiled items Dishwasher with cutlery tray ^ Place very large plates in the - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 21
Cutlery tray (depending on model) Loading the dishwasher ^ Arrange the cutlery as shown in the cutlery tray. For easier unloading cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. Place knives with the cutting edge down and forks with the prongs between the - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 22
Loading the dishwasher Cutlery basket (depending on model) Cutlery insert for the cutlery basket The cutlery basket can be placed anywhere on the front rows of spikes in the lower basket. ^ To avoid risk of injury, knives and forks should be placed with the handles upwards in the basket. However, - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 23
Optional accessories Optional dishwasher accessories are available from your Miele dealer, Miele or Mieleusa.com (depending on your model some may already be supplied with your machine as standard). If you would like to... the following accessory will need to be ordered... ...wash a Miele - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 24
Use Detergent ,Dishwasher detergents contain irritant and corrosive ingredients. Avoid inhaling or swallowing dishwasher detergent. Keep children away from detergent. Keep detergent out of the reach of children. Keep children away from the dishwasher when the door is open. There could still be - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 25
Adding detergent Use ^ Press the latch on the detergent dispenser. The flap will spring open. The flap is always open at the end of a program. ^ Add detergent to the compartments and close the container flap. ^ Use one tab or add powder or gel detergent to compartment II and close the flap. ^ If - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 26
steps (e.g. water softening) may be canceled. Selecting a program Choose the program according to the type of dishware and soiling. See "Program guide" for a description of the programs and their applications. ^ Use the Program button to select the desired program. The indicator light for the - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 27
Use Program guide Pots & Pans Normal Economy SaniWash Rinse & Hold When to use For normally soiled pots & pans with dried on food, and heavily soiled dishware, use 120% - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 28
Use Time display Before the program starts, the time display shows the time of the selected program in hours and minutes. The remaining time is displayed during the program. The time that is displayed may vary for the same program. It depends on the temperature of the incoming water, the - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 29
Use At the end of a program ^ Open the door slightly to check whether the program has finished. The program has ended if the time display shows a 0. The program has not yet finished as long as the program indicator light is still flashing. Close the door again so that the program runs to the end. - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 30
Use Interrupting a program A program will be interrupted as soon as the door is opened. When the door is closed again, the program will continue from where it was interrupted. ,Open the door with care. The water in the dishwasher is hot. Danger of scalding. Before closing the door again, leave it - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 31
Additional options Turbo The Turbo function reduces the program runtimes in programs where the option is available. Energy consumption will increase to achieve optimum results. ^ Open the door. ^ Press the K button to turn the dishwasher on. The K indicator light comes on. ^ Select the desired - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 32
Additional options ^ Open the door. ^ Press the K button to turn the dishwasher on. The K indicator light comes on. ^ Use the Program button to select the desired program. ^ Press the , button. The last Delay start time will appear in the time display. The , indicator light comes on. ^ Set the - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 33
Additional options Buzzer ^ Press the Turbo button four times. A buzzer sounds at the end of a program and when a fault occurs. The Turbo indicator light shows 4 short flashes in intervals. The buzzer at the end of a program sounds four times in intervals with a short pause. The flashing in - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 34
Additional options Memory The memory function allows you to save the last selected program. If you turn the dishwasher off and on again after a program has finished, the last selected program is displayed instead of the Economy program. The flashing in the time display shows whether Memory is - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 35
Additional options Optimize Standby A few minutes after the last button is pressed or a few minutes after the end of the program the dishwasher will switch to Standby mode to save energy. The time display and the indicator lights are turned off and only the K indicator light flashes slowly. If the - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 36
Additional options Factory defaults If you have changed any settings, you can reset them to the factory defaults. ^ Open the door. ^ Press the K button to turn the dishwasher off. ^ Press and hold the Program button and simultaneously turn the dishwasher on using the K button. Keep the Program - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 37
and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage. Technical faults Problem The dishwasher will not start. Possible fault The door is not properly closed. The dishwasher is not plugged in. The circuit - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 38
Faults in the water intake or water drain Problem Possible fault Solution The dishwasher The water supply supply all the way. - Clean the screen in the water supply valve (see User "Maintenance instructions). - The water pressure at the water connection is less than 4.35 psi. Consult a plumber. - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 39
Frequently Asked Questions General problems with the dishwasher Problem Possible fault Solution The indicator lights and the time display are dark. . Clean the drain pump or the non-return valve (see "User maintenance instructions"). There is a kink in the drain Remove the kink. hose. 39 - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 40
Frequently Asked Questions Noises Problem There is a knocking noise in the wash cabinet. There is a rattling noise in the wash cabinet. There is a knocking noise from the water pipe Possible - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 41
Problem Possible fault Solution The dishes are The dishes were not loaded See "Loading the dishwasher". not clean. correctly. The program was not intensive Select a more intensive enough. program (see "Program guide valve (see "User maintenance instructions"). There are streaks The rinse aid - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 42
Frequently Asked Questions Problem Possible fault Dishes are not dry, The rinse aid dosage is set orglasses and too low or the rinse aid cutlery are spotty. reservoir is - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 43
Frequently Asked Questions Problem Possible fault Solution Glasses have a brownish-blue discoloration; the deposit cannot be wiped off. Detergent deposits. Switch to another detergent right away. Glasses are dull - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 44
guarantee the safety, reliability, and longevity of your Miele appliance. Please note that unless expressly approved in writing by Miele's Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 45
User Maintenance Instructions To prevent accidents and machine damage, read these instructions before installation or use. - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 46
Cleaning and Care Check and clean your dishwasher regularly. This will help avoid faults and problems. ,Abrasive cleaning agents, all-purpose cleaners, thinner or ammonium cleaners should not be used on the dishwasher. They will damage the surface. Exterior ^ Only use a - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 47
Cleaning and Care Triple filter system The triple filter system in the base of the wash cabinet prevents food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects (e.g. broken glass, bones). During normal use, the filter system is self- - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 48
Cleaning and Care To clean the inside of the filter, the flap must be opened. ^ Push the clips together a and open the flap b. ^ Rinse under running water. ^ Close the flap so that the clip engages. ^ Return the filter so it lies flat in the base of the wash cabinet. ^ Lock the filter by turning - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 49
Cleaning and Care Cleaning the spray arms Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months. ^ Turn off the dishwasher before cleaning. Removing the spray arms ^ Remove the cutlery tray (if present). ^ Push the upper - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 50
Cleaning and Care Cleaning the drain pump and non-return valve If the dishwasher is not completely drained at the end of a program, the drain pump or non-return valve may be blocked. ^ Turn off the dishwasher and pull the plug. ^ Remove the triple filter (see "Triple filter system"). ^ Use a cup or - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 51
Please refer to the Installation Diagram supplied with these instructions. To comply with IEC sound testing protocols, please contact Miele for additional instructions. Information is subject to change. Please refer to our website to obtain the most current product specification, technical - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 52
plate on the right side of the door. A damaged power cord must only be replaced with a genuine Miele cord by a Miele service technician. GROUNDING INSTRUCTIONS THIS APPLIANCE MUST BE GROUNDED. ,Improper connection of the equipment grounding conductor can result in electric shock. Do not modify the - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 53
. ,CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit the terminal block and the strain relief are tightened. GROUNDING INSTRUCTIONS THIS APPLIANCE MUST BE GROUNDED. This appliance must be connected - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 54
Plumbing Connection to the water supply ,Installation, repairs and other work by unqualified persons could be dangerous. ,Do not drink water from the dishwasher! - Water pressure: Must be between 4.5 - 145 psi (0.3 - 10 bar). - If the water pressure if lower, a "Water Intake" notification will be - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 55
Plumbing Drainage - The machine comes equipped with a built-in non-return valve on the discharge side to prevent waste water from flowing back into the dishwasher. - The drain hose must not be shortened. ,Make sure the hose is not kinked or cut when pushing the machine under the countertop. - The - Miele Classic G 4286 SCSF | Operating and Installation manual - Page 56
Alteration rights reserved / 4212 G4281/G4286 / M.-Nr. 09 510 200 / 01 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Operating Instructions
Dishwasher
G 4281
G 4286
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
M.-Nr. 09 510 200
en - US, CA