Miele DA 3496 Operating instructions/Installation instructions
Miele DA 3496 Manual
 |
View all Miele DA 3496 manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele DA 3496 manual content summary:
- Miele DA 3496 | Operating instructions/Installation instructions - Page 1
Operating and Installation Instructions Ventilation Hood To prevent accidents and damage to the appliance, you must read these instructions before installing the appliance and using it for the first time. en-US M.-Nr. 10 441 050 - Miele DA 3496 | Operating instructions/Installation instructions - Page 2
Contents IMPORTANT SAFETY INSTRUCTIONS 4 Caring for the environment 13 Guide to the appliance 14 Description of bulb 24 Installation...25 Before installation 25 Installation parts ...26 Appliance dimensions 28 Distance between cooktop and ventilation hood (S 31 Installation recommendations - Miele DA 3496 | Operating instructions/Installation instructions - Page 3
Contents Technical data ...46 3 - Miele DA 3496 | Operating instructions/Installation instructions - Page 4
can lead to personal injury and material damage. Read all instructions before installing or using the appliance for the first time. Only use for residential use only. Use only as described in these operating instructions. This ventilation hood is not intended for outdoor use. It must only be - Miele DA 3496 | Operating instructions/Installation instructions - Page 5
safety regulations and the provided installation instructions. Contact Miele's Technical Service Department for examination, repair or adjustment. Repairs and other work by unauthorized persons could be dangerous and may void the warranty. A damaged ventilation hood can be dangerous. Always check - Miele DA 3496 | Operating instructions/Installation instructions - Page 6
IMPORTANT SAFETY INSTRUCTIONS Be certain your appliance is properly installed and grounded by hood is operated simultaneously with devices that burn gas or other fuels. Only open the housing as described in the enclosed "Installation diagram" and in the "Cleaning and care" section of this manual - Miele DA 3496 | Operating instructions/Installation instructions - Page 7
IMPORTANT SAFETY INSTRUCTIONS If the power cord is damaged, it must only be replaced by a qualified service technician. During installation, maintenance, and repair work, the ventilation hood must be disconnected from the electrical supply. It is only completely isolated from the electricity - Miele DA 3496 | Operating instructions/Installation instructions - Page 8
IMPORTANT SAFETY INSTRUCTIONS - a) SMOTHER FLAMES with a close fitting lid, cookie sheet, cookware. - Avoid overheating the cookware (e.g., when cooking with a wok). Always turn the ventilation hood on whenever a burner is in use to prevent damage from condensation. Overheated oils and fats can - Miele DA 3496 | Operating instructions/Installation instructions - Page 9
in place. There is a risk of fire if cleaning is not completed according to the instructions in this manual. Please note that the heat rising from the stovetop during cooking can cause the ventilation hood to become very hot. Do not touch the housing or the grease filters until the ventilation - Miele DA 3496 | Operating instructions/Installation instructions - Page 10
Insufficient distance between the cooking appliance and the ventilation hood can result in damage to the hood. The minimum safety distances between the appliance and the bottom of the ventilation hood specified in the "Installation" section must be maintained, unless the appliance's manufacturer has - Miele DA 3496 | Operating instructions/Installation instructions - Page 11
the ventilation hood. Metal parts can have sharp edges which may cause injury. Wear gloves to protect your hands from being cut. When installing the exhaust duct, only use pipes or tubes made of non-flammable material. These can be obtained from your Miele dealer or from Miele Technical Service - Miele DA 3496 | Operating instructions/Installation instructions - Page 12
IMPORTANT SAFETY INSTRUCTIONS Cleaning and care Never use a steam cleaner to clean the ventilation hood. The steam can reach the electrical components and cause a short circuit. Accessories Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the - Miele DA 3496 | Operating instructions/Installation instructions - Page 13
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of - Miele DA 3496 | Operating instructions/Installation instructions - Page 14
Guide to the appliance 14 - Miele DA 3496 | Operating instructions/Installation instructions - Page 15
Guide to the appliance a Exhaust connection for vented mode/recirculation b Controls c Grease filters d Expandable fume deflector e Overhead LED ClearView front panel of the fume deflector can be fitted with one that matches your kitchen cabinetry instead (DML 400 installation kit required). 15 - Miele DA 3496 | Operating instructions/Installation instructions - Page 16
, the non-return flap opens so that the exhaust air can be transported outside without any obstruction. A non-return flap has been provided with the hood in case your ducting does not have one. It is inserted into the outlet duct collar of the fan. Air entering through the intake is - Miele DA 3496 | Operating instructions/Installation instructions - Page 17
To deactivate it, press the button. Use the On / Off control to confirm your choice of setting. If you do not confirm within 4 minutes, the hood will revert to the old setting. Automatically switching back from the intensive level (IS) The intensive level can be programmed to switch back to - Miele DA 3496 | Operating instructions/Installation instructions - Page 18
off the blower. The next time the fume deflector is pulled out, the hood will operate at power level 2, or Press the On/Off button to lit when the overhead lighting is turned on. Automatic safety shut-down Should the hood be left on, the blower will switch off automatically after 10 hours. The - Miele DA 3496 | Operating instructions/Installation instructions - Page 19
necessary. - When a large volume of cooking vapors are being produced, switch to a high power level in good time. This is more efficient than operating the hood for longer to try to capture cooking vapors that have already been distributed throughout the kitchen. - Make sure that you switch off the - Miele DA 3496 | Operating instructions/Installation instructions - Page 20
RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before cleaning or servicing the hood, disconnect it from the power supply, see "IMPORTANT SAFETY INSTRUCTIONS". Stainless steel housing General information The surfaces and control buttons are susceptible to scratching and - Miele DA 3496 | Operating instructions/Installation instructions - Page 21
filter The reusable metal grease filter in the appliance removes solid particles from the kitchen vapors (grease, dust, etc.) preventing soiling of the hood. A dirty filter is a fire hazard! Cleaning intervals Over longer periods of time, fat buildup on the grease filter hardens and makes cleaning - Miele DA 3496 | Operating instructions/Installation instructions - Page 22
wash temperature between 120°F (50°C) and 150°F (65°C). In a Miele dishwasher use the "Normal" program. Depending on the cleaning agent used, risk of these catching fire. Installing the grease filter When installing the grease filter, make sure that the red plastic guides are at the front and - Miele DA 3496 | Operating instructions/Installation instructions - Page 23
canopy above the grease filter. OdorFree Charcoal Filters are available from your Miele dealer or from Miele Service. See "Technical data" for the type and reference number. Installing/replacing the charcoal filter To install or replace the charcoal filter, the grease filters must first be removed - Miele DA 3496 | Operating instructions/Installation instructions - Page 24
following: Bulb type LED, GU10 Power 3W Replacement bulbs are available from Miele. Pull out the fume deflector, and remove the grease filter hood is being used in recirculation mode. Disconnect the hood from the electrical supply before replacing the bulbs (see "IMPORTANT SAFETY INSTRUCTIONS - Miele DA 3496 | Operating instructions/Installation instructions - Page 25
Before installation Before installing the appliance, read all of the information contained in this chapter and also in the "IMPORTANT SAFETY INSTRUCTIONS" section. Installation 25 - Miele DA 3496 | Operating instructions/Installation instructions - Page 26
Installation Installation parts 26 - Miele DA 3496 | Operating instructions/Installation instructions - Page 27
Installation a 2 brackets for securing the hood in the wall unit. b 1 spacer strip for concealing the gap The kit contains an exhaust grille and flexible aluminum hose with hose clips. d DML 400 installation kit for fitting a drop-down front panel (not supplied but available as an optional accessory - Miele DA 3496 | Operating instructions/Installation instructions - Page 28
Appliance dimensions DA 3466 a Vented mode; consider accessories when measuring cabinet height and cut- outs (e.g. muffler). b Recirculation mode with conversion kit DUU 151. c For Canada: When installing the ventilation hood with a DAR 3000 drop-down frame, make sure that you note the different - Miele DA 3496 | Operating instructions/Installation instructions - Page 29
Installation DA 3486 a Vented mode; consider accessories when measuring cabinet height and cut- outs (e.g. muffler). b Recirculation mode with conversion kit DUU 151. c For Canada: When installing the ventilation hood with a DAR 3000 drop-down frame, make sure that you note the different wall unit - Miele DA 3496 | Operating instructions/Installation instructions - Page 30
Installation DA 3496 a Vented mode; consider accessories when measuring cabinet height and cut- outs (e.g. muffler). b Recirculation mode with conversion kit DUU 151. c For Canada: When installing the ventilation hood with a DAR 3000 drop-down frame, make sure that you note the different wall unit - Miele DA 3496 | Operating instructions/Installation instructions - Page 31
Non-Miele appliance 24" (610 mm) 26" (660 mm) 26" (660 mm) 30" (760 mm) 30" (760 mm) Not possible 26" (660 mm) 30" (760 mm) 30" (760 mm) Not possible If you are installing a front panel made of wood or plastic to the hood, observe the safety distances given by the cooktop - Miele DA 3496 | Operating instructions/Installation instructions - Page 32
Preferably, it should be narrower for better extraction. - The mounting area must be easily accessible. The ventilation hood should be easy to reach and disassemble in case a service call is necessary. This should be taken into consideration when planning the position of cabinetry, shelves, ceilings - Miele DA 3496 | Operating instructions/Installation instructions - Page 33
with a front panel to match the cabinetry This installation requires dimension b for the front panel plus 5 mm) for the DML 400 fixing bracket to be added to the shelf dimension. To position the hood correctly, cut the spacer strip to the required depth T and then attach it to the back of - Miele DA 3496 | Operating instructions/Installation instructions - Page 34
Installation Secure the spacer strip underneath the sides of the cabinetry, flush with the rear wall. Draw a vertical line up both inside walls of the cabinetry - Miele DA 3496 | Operating instructions/Installation instructions - Page 35
the cabinetry from below until the spring mounts at the side engage in the brackets. Push the hood back against the spacer strip. When installing a 31 ¹/₂" (80 cm) or 35 90 cm) wide hood in a 23 ⁵/ ₈" (60 cm) wide wall unit while the fume deflector is pulled out, unscrew the two fume deflector - Miele DA 3496 | Operating instructions/Installation instructions - Page 36
Installation Secure the hood to the brackets from below using two screws on each side. Attach the retaining bracket to the rear panel. The casing needs a stable attachment to - Miele DA 3496 | Operating instructions/Installation instructions - Page 37
(30 mm). For larger and heavier front panels, the weight must be reduced. A DML 400 installation kit, available as an optional accessory, is required for fitting a front panel. Follow the installation instructions supplied. Secure the spacer strip to the back of the appliance from behind using - Miele DA 3496 | Operating instructions/Installation instructions - Page 38
the protective foil around the edge of the grease filter. Use a screwdriver to align the fume deflector correctly. When installing the grease filter, make sure that the red plastic guides are at the front and facing upwards. Place the grease filter in the front of the fume deflector, press it - Miele DA 3496 | Operating instructions/Installation instructions - Page 39
by itself. Depending on the model, the non-return flap is already installed at the factory. Place the exhaust ducting on the exhaust collar for the hood. See "Connection for air extraction" for further instructions on fitting the ducting. Secure the exhaust ducting to the exhaust socket - Miele DA 3496 | Operating instructions/Installation instructions - Page 40
The DUU 151 conversion kit, available from Miele, is required for operating the hood in recirculation mode. You will also need a charcoal filter (see "Technical data"). A non-return flap is not used in recirculation mode. Depending on the model, it is already installed. Remove the non-return flap - Miele DA 3496 | Operating instructions/Installation instructions - Page 41
Power supply Refer to the notes in "Electrical connection" and "IMPORTANT SAFETY INSTRUCTIONS" before connecting to the electricity supply. Connect the hood to the electrical supply. Installation 41 - Miele DA 3496 | Operating instructions/Installation instructions - Page 42
70) and local safety regulations. Installation, repairs and other work by unqualified hood. If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele's Technical Service Department. Grounding Instructions - Miele DA 3496 | Operating instructions/Installation instructions - Page 43
the risk of fire, only use metal ductwork. Please read and follow the "IMPORTANT SAFETY INSTRUCTIONS" to reduce the risk of personal injury. Follow all local building codes when installing the hood. Only use smooth pipes or flexible duct hoses made from noncombustible materials for exhaust ductwork - Miele DA 3496 | Operating instructions/Installation instructions - Page 44
traps are available for exhaust ducts with a diameter of 5" (125 mm) or 6" (150 mm). When installing a condensate trap, make sure that it is positioned vertically and, if possible, directly above the hood outlet duct collar. The arrow on the housing indicates the direction of airflow. If you - Miele DA 3496 | Operating instructions/Installation instructions - Page 45
that you cannot resolve on your own, please contact your Miele dealer or Miele Technical Service. The telephone number for Miele is listed at the back of these instructions. When contacting Miele, please state the model and serial number of your ventilation hood. These can be found on the data plate - Miele DA 3496 | Operating instructions/Installation instructions - Page 46
lighting Total connected load Voltage, Frequency Fuse rating Power cord length Weight DA 3466 DA 3486 DA 3496 Optional accessories for recirculation mode: Recirculation kit DUW 20 and charcoal filter DKF 13-1 350 W 2 x 3 W 356 W 120 V AC, 60 Hz 15 A 2.5 ft (0.75 m) 27.6 lbs. (12.5 kg) 29.8 lbs (13 - Miele DA 3496 | Operating instructions/Installation instructions - Page 47
model and serial number of your appliance available before contacting Technical Service. U.S.A. Miele, Inc. National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 Fax: 609-419-4298 www.mieleusa.com Technical Service & Support Nationwide Phone: 800-999-1360 Fax: 888-586-8056 - Miele DA 3496 | Operating instructions/Installation instructions - Page 48
DA 3466 DA 3486 DA 3496 en-US M.-Nr. 10 441 050 / 01
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
Operating and Installation Instructions
Ventilation Hood
To prevent accidents and damage to the appliance, you
must
read
these instructions before installing the appliance and using it for the first
time.
en-US
M.-Nr. 10 441 050