Miele KWT 2662 ViS Operating and Installation instructions
Miele KWT 2662 ViS Manual
View all Miele KWT 2662 ViS manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele KWT 2662 ViS manual content summary:
- Miele KWT 2662 ViS | Operating and Installation instructions - Page 1
Operating and Installation Instructions Wine Conditioning Unit To prevent accidents and machine damage, read these instructions before installation or use. en-US, CA M.-Nr. 11 508 730 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 2
Contents IMPORTANT SAFETY INSTRUCTIONS 5 Caring for the environment 14 Installation...15 Installation location 15 of the appliance door 49 Electrical connection 50 Saving energy ...52 Guide to the appliance 54 Start screen ...56 Settings mode 57 Accessories ...59 Accessories supplied 59 2 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 3
Contents Optional accessories 59 Before first use 60 Choosing the right Door Assistant (Push2Open/Pull2Open 60 Operating the wine conditioning unit 61 Starting up for the first time 62 Switching the wine conditioning unit on and off 63 Switching off for longer periods of time 63 Selecting - Miele KWT 2662 ViS | Operating and Installation instructions - Page 4
Cleaning the door seal 91 Cleaning the ventilation gaps 91 After cleaning ...91 Frequently Asked Questions 92 Causes of noises 98 Customer Service 99 Contact in the event of a fault 99 Appliance warranty and product registration 99 Declaration of conformity 100 Copyrights and licenses 101 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 5
door shut until the wine conditioning unit has been built in and secured in the installation niche in accordance with the operating and installation instructions. Risk of injury from broken glass. If installed at altitudes above 6,560 ft (2,000 m), there is a risk of the glass in the door breaking - Miele KWT 2662 ViS | Operating and Installation instructions - Page 6
IMPORTANT SAFETY INSTRUCTIONS Appropriate use This wine conditioning unit is intended for use in domestic house- holds and similar residential environments such as - staff kitchen areas in shops, - Miele KWT 2662 ViS | Operating and Installation instructions - Page 7
IMPORTANT SAFETY INSTRUCTIONS Safety with children Children near the wine conditioning unit must be supervised. Do not let children play with the wine conditioning unit. The wine conditioning - Miele KWT 2662 ViS | Operating and Installation instructions - Page 8
IMPORTANT SAFETY INSTRUCTIONS Technical safety The refrigerant circuit has been checked for leaks. . - Ventilate the room where the wine conditioning unit is located for several minutes. - Contact Miele Service. The more coolant there is in a wine conditioning unit, the larger the room it should - Miele KWT 2662 ViS | Operating and Installation instructions - Page 9
IMPORTANT SAFETY INSTRUCTIONS To avoid the risk of damage to the wine conditioning unit, make sure that the connection data (fuse rating, frequency and voltage) on the data - Miele KWT 2662 ViS | Operating and Installation instructions - Page 10
IMPORTANT SAFETY INSTRUCTIONS In environments with a tropical climate (above approximately 90°F (32 Installation, repair, and maintenance work should only be per- formed by a Miele-authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. Repairs - Miele KWT 2662 ViS | Operating and Installation instructions - Page 11
IMPORTANT SAFETY INSTRUCTIONS Correct use The wine conditioning unit is designed for use within a specific cli- mate class (room temperature range). Do not use in a climate class for - Miele KWT 2662 ViS | Operating and Installation instructions - Page 12
IMPORTANT SAFETY INSTRUCTIONS Cleaning and maintenance Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time. Do not - Miele KWT 2662 ViS | Operating and Installation instructions - Page 13
IMPORTANT SAFETY INSTRUCTIONS Disposal of your old appliance Children could become trapped in the machine and could suffo- cate. - Remove the machine doors. - Leave the wooden shelves in - Miele KWT 2662 ViS | Operating and Installation instructions - Page 14
leak into the environment. Please ensure that your old appliance does not pose a danger to children while being stored prior to disposal. See "IMPORTANT SAFETY INSTRUCTIONS" for more information. 14 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 15
*INSTALLATION* Installation Installation location This appliance should be installed in a dry, well-ventilated room. When deciding where to install your wine conditioning unit, please bear in mind that it will use more energy if installed near to a heater, a range, or another appliance that gives - Miele KWT 2662 ViS | Operating and Installation instructions - Page 16
the ventilation gaps are not covered, and the wine conditioning unit has been installed in accordance with these operating and installation instructions. Impaired functionality due to high humidity and high temperature. High humidity (over approx. 70%) combined with a high room temperature (over - Miele KWT 2662 ViS | Operating and Installation instructions - Page 17
been installed and secured in its installation niche in accordance with these operating and installation instructions. Due to its weight and size, the wine conditioning unit must be installed by fully loaded, the weight of the wine conditioning unit is approx.: KWT 26x2 ViS 1497 lbs (679 kg) 17 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 18
to change the door hinge to the other side, please contact the Miele Service department. Side-by-side This wine conditioning unit can be installed side- -by-side installation (see "Accessories - Optional accessories"). Instructions for installing appliances side-by-side can be found in - Miele KWT 2662 ViS | Operating and Installation instructions - Page 19
*INSTALLATION* Installation If the partition wall a is narrower than 6 5/16" (160 mm), you will need the side panel heater from the side-by-side installation kit to prevent condensation from forming and any resulting damage. When planning installation niches, please note that the niche into which - Miele KWT 2662 ViS | Operating and Installation instructions - Page 20
*INSTALLATION* Installation Installation dimensions Position of the electrical connection - The electrical connection must not be positioned higher than 9" (228 mm) above the floor. The electrical socket must not be concealed behind the appliance and must be easily accessible in an emergency. 20 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 21
*INSTALLATION* Installation C A B KWT 26x2 Vi(S) A 84"-85 3/16" (2134-2164 mm) B 24" (610 mm) C 24" (610 mm) + door front 3/4"-1 1/2" (19-38 mm) 21 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 22
*INSTALLATION* Installation Side view 10 5/16" (262 mm) 3 3/8" (85 mm) 1 3/16" (30 mm) 7/8" (22 mm) 4" (102 mm) 4" (102 mm) 22 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 23
*INSTALLATION* Installation Dimensions when the appliance door is open (opening angle 90°/115°) 3/8" (10 mm) D A B C A B* 26 5/8" (677 mm) Door front (3/4"-1 1/2" (19-38 mm)) C* Door handle D (with a door front of 3/4" (19 mm)) 11 5/8" (296 mm) * The dimensions of the door front and the - Miele KWT 2662 ViS | Operating and Installation instructions - Page 24
*INSTALLATION* Installation Dimensions of the cabinet front 23 3/4" (604 mm) 17 3/4" (450 mm) 3" (77 mm) 5 7/8" (149,5 mm) 63 7/8" (1622 mm) 79 7/8" (2029 mm) 10 1/8" (257,5 mm) ≥ 4" - 5 3/16" (≥ 102 - 132 mm) 24 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 25
door shut until the wine conditioning unit has been built in and secured in its installation niche in accordance with the operating and installation instructions. The wine conditioning unit is both large and heavy. Installation must be carried out by two people. The wine conditioning unit must be - Miele KWT 2662 ViS | Operating and Installation instructions - Page 26
installing the door front, ensure that the weight of the door does not exceed the maximum permitted: Wine conditioning Max. weight of unit door front KWT 26x2 Vi(S) 161 lb (73 kg) If the door front is too heavy, this can cause damage. Installing a door front which is heavier than the maximum - Miele KWT 2662 ViS | Operating and Installation instructions - Page 27
*INSTALLATION* Installation Aligning the installation niche The installation niche must be carefully aligned using a bubble level before installing the wine conditioning unit. The niche corners must be at 90° angles to each other, otherwise the cabinet front will not sit straight on all 4 corners - Miele KWT 2662 ViS | Operating and Installation instructions - Page 28
*INSTALLATION* Installation Before installation Before installation, remove any accessories from the back of the appliance. Check the wine conditioning unit for damage during transportation. Do not install the wine conditioning unit if it is damaged. Check that all parts at the back of the - Miele KWT 2662 ViS | Operating and Installation instructions - Page 29
*INSTALLATION* Installation Preparing the installation niche Risk of damage and injury from the wine conditioning unit tipping over. The wine conditioning unit is very heavy and can tip forwards when the appliance door is open. The installation niche must be secured to the wall behind it and/or - Miele KWT 2662 ViS | Operating and Installation instructions - Page 30
*INSTALLATION* Installation Danger of injury and damage to the appliance due to the wine conditioning unit tipping over. If the anti-tip brackets are fixed too high up, they cannot be used to secure the wine conditioning unit. The distance between the anti-tip brackets and the wine conditioning - Miele KWT 2662 ViS | Operating and Installation instructions - Page 31
units/refrigeration appliances to one another now (see the installation instructions for the side-by-side installation kit). To ensure that ventilation grille must be removed from the appliance toe-kick: Carefully guide a flat-head screwdriver through the toe-kick ventilation grille on - Miele KWT 2662 ViS | Operating and Installation instructions - Page 32
*INSTALLATION* Installation 5 6 Affix edge protection to the adjacent cabinet fronts. Insert the plug connector at the back of the wine conditioning unit (see "Installation - Electrical connection"). Insert the plug into the electrical socket. Tip: Secure the power cord to prevent it - Miele KWT 2662 ViS | Operating and Installation instructions - Page 33
*INSTALLATION* Aligning the wine conditioning unit The installation aids on the appliance door provide assistance with the alignment of the wine conditioning unit in the installation niche. The installation aids are suitable for a cabinet front thickness of 3/4" or 1 1/2" (19 mm or 38 mm). Align - Miele KWT 2662 ViS | Operating and Installation instructions - Page 34
*INSTALLATION* Installation Position the supplied spacers on both sides on the markings next to the adjustable feet at the front of the wine conditioning unit. Adjust the rear feet with a ratchet (attachment: socket, 8 mm) or a TX 20 screwdriver . 34 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 35
*INSTALLATION* Installation Tip: Proceed carefully when adjusting the feet, alternating between the left and right feet. Adjust the front feet with a ratchet (attachment: socket, 8 mm) or a TX 20 screwdriver . Place a bubble level across the installation aids on the appliance door to check - Miele KWT 2662 ViS | Operating and Installation instructions - Page 36
*INSTALLATION* Installation Risk of damage if the feet are adjusted too much. The rear adjustable feet can be damaged. Unscrew the feet only until the marking on the toe-kick is aligned to a maximum of 2 7/16" (62 mm) (max. niche height of 85 3/16" (2,164 mm)). Securing the wine conditioning - Miele KWT 2662 ViS | Operating and Installation instructions - Page 37
*INSTALLATION* Installation If it is not possible to secure the wine conditioning unit at the top, it can be attached to the installation niche with the side retaining lugs: Open the appliance door. Flip open the side retaining lugs . Screw the side retaining lugs to the adjacent - Miele KWT 2662 ViS | Operating and Installation instructions - Page 38
*INSTALLATION* Installation Preparing the cabinet fronts Open the appliance door as far as it will go. Unscrew the angle trims from both sides of the appliance door and place the trims and screws to one side - they will be required later. Close the appliance door. Unscrew the installation - Miele KWT 2662 ViS | Operating and Installation instructions - Page 39
*INSTALLATION* Installation Measure the gap X between the mounting frame and the upper edge of the adjacent cabinet front. Remove the nuts and washers from the threaded bolts and store them in a safe place - they will be required later. Take the mounting frame off the appliance door by - Miele KWT 2662 ViS | Operating and Installation instructions - Page 40
*INSTALLATION* Installation Secure the mounting frame to the top of the cabinet front, using at least 6 screws. The mounting frame has several different types of holes to take account of a variety of cabinet fronts. When securing the frame, always screw into the strongest part of the cabinet - Miele KWT 2662 ViS | Operating and Installation instructions - Page 41
*INSTALLATION* Securing and aligning the cabinet front Installation Open the appliance door and hang the cabinet front on its frame onto the threaded bolts . Press the angle trims into the white plastic frame on both sides and screw them on loosely at first. Spare screws are provided in - Miele KWT 2662 ViS | Operating and Installation instructions - Page 42
*INSTALLATION* Installation Align the depth of the cabinet front via the gaps in the angle trims . Place the washers and nuts back in position and tighten the nuts . The cabinet front is now secured. Now tighten the screws in the angle trims . Open the appliance door. Remove the - Miele KWT 2662 ViS | Operating and Installation instructions - Page 43
*INSTALLATION* Mounting the fixing brackets The fixing bracket is used to secure the cabinet front to the bottom of the appliance door. Do not mount the fixing brackets until the wine conditioning unit (or side-byside combination, if applicable) has been installed and the cabinet fronts have been - Miele KWT 2662 ViS | Operating and Installation instructions - Page 44
*INSTALLATION* Installation Tighten the screw at the bottom of the appliance door. Click the covers onto the fixing brackets. Install the cover over the fixing bracket . 44 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 45
*INSTALLATION* Securing the covers Installation Before the cover can be installed in the gap above the wine conditioning unit, it must be assembled as follows: Place the assembled cover into the gap above the wine conditioning unit so it clicks into place. While doing so, slide both parts - Miele KWT 2662 ViS | Operating and Installation instructions - Page 46
*INSTALLATION* Installation Install the two plastic covers on both sides of the appliance door by clicking them into the gap between the appliance door and the cabinet door, starting at the bottom and working up to the top. Secure both sides of the wine conditioning unit using at least 3 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 47
*INSTALLATION* Installation Fitting the door trim Install the cover onto the light contact switch. Cut the door trim to the width of the cut-out in the cabinet front as required. An extra length of trim is supplied to help calculate the length required. Trim the long pieces of door trim for - Miele KWT 2662 ViS | Operating and Installation instructions - Page 48
*INSTALLATION* Installation Securing the toe-kick ventilation grille and toe-kick panel Cut the short pieces of door trim for the top and bottom of the door to the length required Y. Fit the door trim into the gap between the cabinet front and the glass. Click the toe-kick ventilation - Miele KWT 2662 ViS | Operating and Installation instructions - Page 49
*INSTALLATION* Limiting the opening angle of the appliance door The door hinges on the wine conditioning unit are set at the factory to enable the appliance door to be opened wide. If, for example, the appliance door hits an adjacent wall when it is opened, you should limit the opening angle of the - Miele KWT 2662 ViS | Operating and Installation instructions - Page 50
Risk of electric shock! The wine conditioning unit must only be switched on when it has been installed in accordance with the installation instructions. Ground the wine conditioning unit. The wine conditioning unit must not be grounded via a gas pipe. If in doubt, have a suitably qualified and - Miele KWT 2662 ViS | Operating and Installation instructions - Page 51
*INSTALLATION* Installation If the outlet is no longer accessible after installation, an additional means of disconnection must be provided for all poles. Suitable means of disconnection include switches with an all-pole contact gap of at least 1/8" (3 mm). These can be circuit breakers, fuses, - Miele KWT 2662 ViS | Operating and Installation instructions - Page 52
Saving energy Installation / Maintenance Temperature setting Normal energy consumption In a well-ventilated room. Protected from direct sunlight. Away from heat sources (radiator, range/oven). Where the ideal room temperature is approx. 68°F (20°C). Air vents uncovered and dusted regularly. 50° to - Miele KWT 2662 ViS | Operating and Installation instructions - Page 53
Saving energy Normal energy consumption Increased energy consumption Use Wooden shelves arranged as they were when the appli- ance was delivered. Only open the door when necessary and for as short a time as possible. Store wine bottles in an organized way. Frequent opening of the door for - Miele KWT 2662 ViS | Operating and Installation instructions - Page 54
Guide to the appliance a Display b On/Off switch c Wooden shelves with labels d Interior lighting e Isolator plate for thermal separation of the wine conditioning zones f SommelierSet* g Glass door with UV filter h Automatic door opening (Push2open/Pull2open) 54 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 55
Guide to the appliance * The SommelierSet consists of: A glass holder, a bottle holder, 2 accessory boxes, and a decanter plate. The SommelierSet also includes felt inserts in various sizes. 55 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 56
Guide to the appliance Start screen 4 1 52°F 52°F 52°F 2 5 3 a Temperature display (target temperature) for the three wine conditioning zones b sensor For setting the temperature and humidity c - Miele KWT 2662 ViS | Operating and Installation instructions - Page 57
Guide to the appliance Settings mode In Settings mode, you can select the following appliance functions and alter their settings to some extent: Symbol Language Display - Miele KWT 2662 ViS | Operating and Installation instructions - Page 58
Guide to the appliance Factory Default Reset to default settings (see "Selecting additional settings") Ambient Lighting Choose between 5 different settings for ambient lighting (see "Selecting additional - Miele KWT 2662 ViS | Operating and Installation instructions - Page 59
-kick ventilation grille must be converted. A new hinge pocket is required in order to do this. The door hinging must only be replaced by Miele Service. Optional accessories are available from Miele, your Miele dealer or online via the Miele website. 59 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 60
before switching on the wine conditioning unit. The adhesive tape is difficult to remove from cold surfaces. Cleaning Please refer to the relevant instructions in "Cleaning and care". Clean the inside of the wine conditioning unit and the accessories. Choosing the right Door Assistant (Push2Open - Miele KWT 2662 ViS | Operating and Installation instructions - Page 61
Before first use Operating the wine conditioning unit The touch display can be scratched by pointed or sharp objects, e.g., pens. Only touch the display with your fingers. If your fingers are cold, the touch display may not react. 52°°CF 5°2-F1°8F °5C2°F The sensor controls - Miele KWT 2662 ViS | Operating and Installation instructions - Page 62
degrees Celsius) or °F (degrees Fahrenheit) - Set up Miele@home: Select Continue if you wish to set up Miele@home now (to do this, follow the instructions under "Selecting additional settings - Miele@home"). 62 Select Skip if you would prefer to set up Miele@home later. Use the and sensor - Miele KWT 2662 ViS | Operating and Installation instructions - Page 63
Switching the wine conditioning unit on and off Switching the wine conditioning unit on Open the appliance door. Switch the wine conditioning unit on by pressing the On/Off switch. The wine conditioning unit will start to cool and the interior lighting will come on when the appliance door is - Miele KWT 2662 ViS | Operating and Installation instructions - Page 64
Press OK for 6 seconds to unlock will appear in the display if you select a sensor control while the keypad lock is switched on. Follow the instructions on the display. 64 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 65
unit is not working properly and want to check if it is suffering from any problems. In Settings mode , use the and sensor controls to select control. Make a note of the error message(s) displayed. Contact Miele Service and inform them of the error message(s) on the display. Confirm the - Miele KWT 2662 ViS | Operating and Installation instructions - Page 66
Selecting additional settings Switching on the Door Assistant You can choose between the two Door Assistants Push2Open and Pull2Open. The default Door Assistant is Push2Open. The Push2Open Door Assistant is suitable for cabinet fronts without handles. The door will then open automatically when - Miele KWT 2662 ViS | Operating and Installation instructions - Page 67
Selecting additional settings - Adjusting the duration of the AutoClose function You can also adjust the duration for how long the appliance door will remain open until it closes automatically. In Settings mode , use the and sensor controls to select Door Assistant and select OK to confirm - Miele KWT 2662 ViS | Operating and Installation instructions - Page 68
: - A WiFi network - The Miele@mobile app - A Miele user account The user account can be created via the Miele@mobile app. The Miele@mobile app will guide you as you connect your wine conditioning unit to your home WiFi network. Once your wine conditioning unit is connected to your WiFi network you - Miele KWT 2662 ViS | Operating and Installation instructions - Page 69
use the Miele@mobile app depends on the availability of the Miele@home service in your country. The Miele@home service is not available in every country. For information about availability, please OK to confirm your selection. Open the Miele@mobile app and follow the instructions in the app. 69 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 70
Confirm your selection with OK. Use the and sensor controls to select via WPS and select OK to confirm your selection. Now follow the instructions in the display. Confirm the process with OK. To be able to use the Miele@home functions, you also have to register your wine conditioning - Miele KWT 2662 ViS | Operating and Installation instructions - Page 71
Selecting additional settings Deactivating Miele@home In Settings mode , use the and sensor controls to select the Miele@home and select OK to confirm your selection. Use the and sensor controls to select Deactivate and select OK to confirm your selection. Deactivation successful will - Miele KWT 2662 ViS | Operating and Installation instructions - Page 72
buttons to select Demo Mode and select OK to confirm your selection. Press OK for 4 seconds to deactivate appears in the display. Follow the instructions on the display and touch and hold the sensor control OK for 4 seconds. The countdown Demo Mode will deactivate in seconds. will appear in the - Miele KWT 2662 ViS | Operating and Installation instructions - Page 73
Selecting additional settings Resetting the settings to their default settings You can reset the wine conditioning unit's settings to their default settings. Reset the wine conditioning unit's settings to the default settings when disposing of your wine conditioning unit, selling it, or putting a - Miele KWT 2662 ViS | Operating and Installation instructions - Page 74
Selecting additional settings The wine conditioning unit's settings will be reset to the following values: Function Default settings / / °F / ° C Language Display Brightness Color Scheme Buzzer Tones Keypad Tone Temperature Unit Keypad Lock Door Assistant Miele@home Ambient - Miele KWT 2662 ViS | Operating and Installation instructions - Page 75
Selecting additional settings Switching Sabbath Mode on or off The wine conditioning unit offers a Sabbath Mode for the purposes of religious observance. When Sabbath Mode is switched on, you cannot make any settings on your wine conditioning unit. You can still select: - the sensor control for - Miele KWT 2662 ViS | Operating and Installation instructions - Page 76
Selecting additional settings Switching Ambient Lighting on or off The Ambient Lighting can be switched on so your wines are on display even when the appliance door is closed. The interior lighting now remains on even when the appliance door is closed. Each wine conditioning zone has its own - Miele KWT 2662 ViS | Operating and Installation instructions - Page 77
Selecting additional settings Risk of injury from LED lighting. This lighting corresponds to risk group RG 2. If the cover is defective, there is a risk of eye injury. If the lighting cover is defective, do not look from a close range directly into the lighting with optical instruments (e.g., - Miele KWT 2662 ViS | Operating and Installation instructions - Page 78
The ideal temperature and humidity Wine continues to mature depending on the surrounding conditions. The length of time for which wine can be kept in good condition will therefore depend not only on the temperature but also on the air quality. The wine conditioning unit with its constant ideal - Miele KWT 2662 ViS | Operating and Installation instructions - Page 79
The ideal temperature and humidity Isolator panels for thermal separation The wine conditioning unit has two fixed isolator panels that divide the interior into three zones, which can be conditioned in different ways. This means that you can store up to three different types of wine at the same - Miele KWT 2662 ViS | Operating and Installation instructions - Page 80
The ideal temperature and humidity Temperature range In all three zones, it is possible to set temperatures between 41°F and 68°F (5°C and 20°C). Humidity In most refrigerators the humidity is too low for wine and therefore a refrigerator is not suitable for wine conditioning. Higher humidity - Miele KWT 2662 ViS | Operating and Installation instructions - Page 81
The ideal temperature and humidity Not increasing the humidity Touch the sensor control to set the temperature. Use the and sensor controls to select the wine conditioning zone for which you do not want to increase the humidity and select OK to confirm your selection. Touch the - Miele KWT 2662 ViS | Operating and Installation instructions - Page 82
Door alarm Door alarm An alarm will sound if the appliance door has been left open for longer than approx. 2 minutes. The Close the door message also appears on the display. As soon as the door is closed, the alarm will stop and the message on the display will disappear. Turning the door alarm off - Miele KWT 2662 ViS | Operating and Installation instructions - Page 83
Storing wine bottles Always observe USDA food safety guidelines. WARNING! Fire hazard! Do not operate any electrical equipment inside the wine conditioning. This can cause sparking. Vibration and movement have a negative effect on the maturing process which can in turn affect the taste of the - Miele KWT 2662 ViS | Operating and Installation instructions - Page 84
Storing wine bottles Wooden shelves Adjusting the wooden shelves The slats in the wooden shelves can be individually adjusted to suit, so that every bottle is stored in perfect safety regardless of shape or size. The wooden shelves are mounted on telescopic runners which can be pulled out to make - Miele KWT 2662 ViS | Operating and Installation instructions - Page 85
Storing wine bottles Labeling the wooden shelves For quick and easy identification of the wines stored, you can write on the blackboard-painted surface of the strips on the wooden shelves. You can write directly on the strip or remove it from the wooden shelf. To do so: Maximum capacity Risk of - Miele KWT 2662 ViS | Operating and Installation instructions - Page 86
SommelierSet Setting up the SommelierSet The SommelierSet can be used to have your wine ready for drinking, straight from the wine conditioning unit. You can store wine glasses and accessories, decant your wine, and store open bottles in the wine conditioning unit. For ideal access, the SommelierSet - Miele KWT 2662 ViS | Operating and Installation instructions - Page 87
SommelierSet Pull the runners above the bottom shelf out as far as they will go on both sides. Insert the two racks into the glass holder . Position the glass holder on the runner on the left and the bottle holder on the runner on the right. Check that the pins on the runners engage in - Miele KWT 2662 ViS | Operating and Installation instructions - Page 88
Automatic defrosting WARNING! DANGER of injury and damage! Do not use any mechanical or other types of aids which are not recommended by the manufacturer to accelerate the defrosting process. The wine conditioning unit defrosts automatically. 88 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 89
a short circuit. Do not remove the data plate located inside the wine conditioning. It contains information which is required in the event of a service call. Cleaning agents To avoid damaging the surfaces of your appliance, do not use: - cleaning agents containing soda, ammonia, acids, or chloride - Miele KWT 2662 ViS | Operating and Installation instructions - Page 90
Cleaning and care Before cleaning the wine con- Interior, accessories, and ap- ditioning unit pliance door Switch the wine conditioning unit off by pressing the On/Off switch. Take any wine bottles out of the wine conditioning unit and store them in a cool place. Clean the wine conditioning - Miele KWT 2662 ViS | Operating and Installation instructions - Page 91
Cleaning the door seal Risk of damage as a result of in- correct cleaning. If you treat the door seal with oils or grease, it can become porous. Do not use any oils or grease on the door seal. The door seals should be cleaned regularly with clean water, and then wiped dry with a soft cloth. - Miele KWT 2662 ViS | Operating and Installation instructions - Page 92
can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. To prevent cold from escaping, open the appliance doors as little as possible until the fault has been corrected. Problem - Miele KWT 2662 ViS | Operating and Installation instructions - Page 93
Frequently Asked Questions Problem Possible cause and solution Only open the appliance door when necessary and for as short a time as possible. After a while, the temperature will return to - Miele KWT 2662 ViS | Operating and Installation instructions - Page 94
Frequently Asked Questions Problem Possible cause and solution No alarm sounds de- You have switched off the audible signal. spite the appliance door Switch the audible signal back on - Miele KWT 2662 ViS | Operating and Installation instructions - Page 95
display until the error has been rectified. The voltage level is too high/low. Observe the connection data under "Electrical connections". Contact Miele Service if necessary. To turn the alarm off, touch the symbol. The error message does not disappear from the display until the error has - Miele KWT 2662 ViS | Operating and Installation instructions - Page 96
Asked Questions The interior lighting is not working. Problem The interior lighting is not working. Possible Do not remove the lighting cover. The LED lighting may only be repaired or replaced by Miele Service. Risk of injury from LED lighting. This lighting corresponds to risk group RG 2. If - Miele KWT 2662 ViS | Operating and Installation instructions - Page 97
Frequently Asked Questions General problems with the wine conditioning unit Problem Possible cause and solution Bacteria has begun to form on the wine bottle labels. Bacteria may form on the labels, depending on the type of - Miele KWT 2662 ViS | Operating and Installation instructions - Page 98
Causes of noises Normal noises Cause Brrrrr ... A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. Blub, blub ... A gurgling noise can be heard when the refrigerant circulates through the pipes. Click ... Clicking sounds - Miele KWT 2662 ViS | Operating and Installation instructions - Page 99
can be found at the end of this document. Please quote the model identifier and serial number of your appliance (SN) when contacting Miele Customer Service. Both pieces of information can be found on the data plate. You will find the data plate inside your appliance. Appliance warranty and product - Miele KWT 2662 ViS | Operating and Installation instructions - Page 100
Declaration of conformity Frequency band Maximum transmitting power 2.412 GHz - 2.462 GHz < 100 mW 100 - Miele KWT 2662 ViS | Operating and Installation instructions - Page 101
Copyrights and licenses Miele uses their own and third party software which is not subject to any so-called open source license for the operation and control of the device/appliance. This software/these software components are protected by copyright. The copyright powers of Miele and third parties - Miele KWT 2662 ViS | Operating and Installation instructions - Page 102
- Miele KWT 2662 ViS | Operating and Installation instructions - Page 103
9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 Fax: 609-419-4298 www.mieleusa.com Customer Service & Support Phone: 888-99-MIELE(64353) Fax: 888-586-8056 [email protected] International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Canada Importer Miele - Miele KWT 2662 ViS | Operating and Installation instructions - Page 104
KWT 2662 ViS, KWT 2672 ViS en-US, CA M.-Nr. 11 508 730 / 01
Operating and Installation
Instructions
Wine Conditioning Unit
To prevent accidents and machine damage, read these instructions
before
installation or use.
en-US, CA
M.-Nr. 11 508 730