Miele KWT 4154 UG-1 Operating and Installation manual
Miele KWT 4154 UG-1 Manual
 |
View all Miele KWT 4154 UG-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele KWT 4154 UG-1 manual content summary:
- Miele KWT 4154 UG-1 | Operating and Installation manual - Page 1
Operating and Installation Instructions Under Counter Wine Storage Unit KWT 4154 UG-1 To prevent accidents and machine damage read these instructions before installation or use. en - US, CA M.-Nr. 07 508 850 - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 2
Contents IMPORTANT SAFETY INSTRUCTIONS 4 Guide to the Wine Storage Unit 7 Before use 9 Turning off for longer periods 20 Door seal 21 Active charcoal filters 21 Frequently asked questions 22 After sales service 25 Caring for the environment 28 Installation 29 Location 29 Ventilation 29 - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 3
Contents Changing the door hinging 30 Under-counter installation 32 Appliance dimensions 32 Adjustments 32 Preparing the appliance 32 Fitting the appliance into place 33 Electrical connection 34 3 - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 4
instructions before installation and use to prevent accidents and machine damage. This appliance is intended for residential use only. Use only as described in this Operating manual a qualified electrician if in doubt. ~ Before installation or service, disconnect the power supply to the work area - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 5
until the appliance is completely installed and secured per installation instructions. ~ This appliance must be installed and connected in compliance with the installation instructions. ~ Installation and repair work should be performed by a Miele authorized service technician. Work by unqualified - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 6
IMPORTANT SAFETY INSTRUCTIONS Disposal of your old appliance ~ Before disposing of an old appliance, first make the door latch or lock unusable. ~ a qualified technician. The manufacturer cannot be held liable for damage caused by non-compliance with these Important Safety instructions. SAVE THESE - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 7
Guide to the Wine Storage Unit a Interior lighting b Insulation shelf for thermal separation c Wooden shelf with decorative strip for descriptive labels d Active charcoal filter e Condensate channel and drain hole 7 - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 8
Guide to the Wine Storage Unit Control panel a On/Off s button b Temperature display for upper zone c Temperature selector buttons for upper zone (+ for warmer; - for colder) d Constant humidity (Dynamic cooling) - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 9
^ Clean the inside of the appliance and the accessories with a mild solution of warm water and liquid dish soap. Dry with a soft cloth. After installing the unit, wait at least 30 minutes before switching it on. During transport, the fluids in the refrigeration system may have shifted, and will need - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 10
button's indicator light flashes, and the temperature display for the lower zone (right display) flashes ;. Storage temperatures above 72°F (22°C) will cause wines to mature too quickly. By contrast, wine should not be stored below 41°F (5°C), since it will not mature fully at this low temperature - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 11
is released, the actual temperature in the respective zone will be displayed. The two temperature zones are cooled alternately, so depending on the quantity of wine being stored, it may take several hours for the desired temperature to be reached, and for the temperature display to adjust. If, after - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 12
Optimum temperature and air quality Temperature display During normal operating, the temperature displays indicate the temperatures inside the unit. The temperature display will flash if: - a different temperature is being set, - the temperature in one section deviates from the set temperature by - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 13
levels are too low for storing wines. High humidity levels (60 - 70 %) are very important for the storage of wine, so that the corks remain moist climate for your wine is maintained. Constant humidity (DynaCool) m This setting allows the relative humidity inside the wine cooler and the temperature - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 14
Optimum temperature and air quality Air exchange through the activate charcoal filter External air passes through the filter before entering the unit. The active charcoal filter ensures that only clean, odor-free air enters the unit, creating additional protection against odor contamination. The - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 15
and hold the interior lighting button. Turning on the interior lighting Generally, wine should be stored in dark conditions. However, the interior lighting can be turned on to enable you to see the wine stored in the unit. ^ At the same time, press the + or - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 16
wine in crates or boxes. - Any vibration or movement of a wine bottle can interrupt the natural breathing process of the wine, which affects the taste. - Always lay bottles on their side for storage Use the labels supplied to identify your wine quickly and easily. Insert the labels into the - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 17
Alarm The appliance is equipped with an alarm system, to ensure that the temperature does not rise or fall unnoticed because of energy loss or an open door. Door alarm If the door has been left open for more than approx. 60 seconds, the alarm will sound. The alarm system is always operational, it - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 18
Safety Lock The safety lock can be activated to prevent the appliance from being turned off inadvertently. Activating / Deactivating the safety lock ^ Press the constant humidity button to save the setting. The safety lock indicator light X will light up when the safety lock is activated. ^ Press - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 19
During normal operation, condensate and frost can form on the rear wall of the refrigerator and drawers. You do not need to remove this build-up, it will defrost and evaporate automatically with the heat generated by the appliance. Defrosting 19 - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 20
Cleaning and care To reduce the risk of electrical shock, disconnect the appliance from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before maintenance. Before cleaning ^ Unplug the power cord. ^ Remove any bottles from the appliance - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 21
only and dry thoroughly. Active charcoal filters Replacement filters are available from Miele. After cleaning ^ Return all filters 90° clockwise or counter-clockwise. ^ Remove the filters. ^ Insert the new filters with the handle in the vertical position. ^ Turn the filters 90° clockwise or counter - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 22
Frequently asked questions With the aid of the following guide minor problems can be corrected without a service call. Repairs should only be carried out by a qualified and trained person in strict accordance with local and national safety regulations. Unauthorized repairs could cause - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 23
is not within this range, a bar will be displayed instead. "F0" or "F1" appears in the temperature display. A fault has occurred. Contact Miele Technical Service. What if the appliance cannot be turned off? Possible fault Solution The safety lock has been activated. Deactivate the lock, see - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 24
Frequently asked questions The appliance is making noises. Issue Possible fault Solution Brrrrr... Blubb, blubb.... Humming noise made by the compressor. This noise can get louder for brief periods when the motor is switching on. A gurgling noise can be heard when coolant is circulating - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 25
by 5 years of worry-free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. Only genuine Miele parts installed by factory-trained professionals can guarantee the safety, reliability and - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 26
26 - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 27
Installation instructions To prevent accidents and machine damage read these instructions before installation or use. 27 - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 28
Caring for the environment Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc., are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 29
70% air humidity) the wine cooler must only be operated in air conditioned locations. Otherwise the function of the machine cannot be guaranteed. This appliance is top-heavy and must be secured to prevent the possibility of tipping forward. Location The appliance should be installed in a dry, well - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 30
Changing the door hinging The appliance is supplied right-hand hinged. If left-hand door hinging is required, follow the instructions below. ^ Close the door, and unscrew the top hinge pin from the door a. ^ Unscrew the bracket b from underneath the door. ^ Tip the door forward slightly c, - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 31
Changing the door hinging ^ Replace the plug h and the hinge pin guide i in the top of the opposite door. ^ Hang the door on the lower hinge pin j, and close the door k. ^ Refit the top hinge pin l through - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 32
Under-counter installation Appliance dimensions Preparing the appliance ^ Carefully tip the appliance backward. * The overall height can be increased by 2" (50 mm) by adjusting the feet. ^ Attach the toe-kick - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 33
Under-counter installation Fitting the appliance into place ^ Slide the appliance into the installation niche. Ensure that the power cord does not get caught. Be sure the power outlet remains accessible. ^ Using the fixing strip and screws, secure the appliance into place. 33 - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 34
- Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Improper connection checked by a qualified electrician or service technician. Installation, repairs and other work by Miele Technical Service. U1-800-999-1360 V1-800-565-6435 34 - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 35
35 - Miele KWT 4154 UG-1 | Operating and Installation manual - Page 36
Alteration rights reserved / 4609 KWT 4154 UG-1 For the most updated manual see the Miele web site. M.-Nr. 07 508 850 / 02
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
Operating and Installation
Instructions
Under Counter
Wine Storage Unit
KWT 4154 UG-1
To prevent accidents
and machine damage
read these instructions
before
installation or use.
M.-Nr. 07 508 850
en - US, CA