Miele PG 8056 Manuals
Miele PG 8056 Manual
 |
View all Miele PG 8056 manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele PG 8056 manual content summary:
- Miele PG 8056 | Manuals - Page 1
Operating instructions Commercial dishwasher PG 8056 To prevent accidents and machine damage, you absolutely must read these instructions before installation or use. en - US M.-Nr. 09 981 900 - Miele PG 8056 | Manuals - Page 2
Contents Guide to the manual ...5 Proper use ...6 IMPORTANT SAFETY INSTRUCTIONS 7 Proper installation...7 Technical safety ...7 Proper use ...9 Children in the vicinity ...10 Accessories ...10 Symbols attached to the commercial dishwasher 11 Disposal of the commercial dishwasher 11 Appliance - Miele PG 8056 | Manuals - Page 3
...44 At the end of the program 45 Deactivation...45 Unloading the dishwasher 45 Interrupting a program...46 Cancelling a program ...47 Program chart "Additional settings" menu 63 Menu structure ...65 CODE...67 Release...67 Changing the PIN code 67 Log book...69 Temperature unit...70 Moving a - Miele PG 8056 | Manuals - Page 4
94 Technical problems...94 Unusual behavior of the dishwasher 96 Noises...97 Poor cleaning results ...98 Frequently asked questions 100 Cleaning the filters in the water inlet 100 Cleaning the drain pump and non-return valve 101 After sales service ...103 Installation instructions 104 Caring - Miele PG 8056 | Manuals - Page 5
Guide to the manual Warnings Information which is important for safety is highlighted in a thick framed box with a warning symbol. This alerts you to the potential danger of injury to people or property. Read these warning notes carefully and observe the procedural instructions and codes of - Miele PG 8056 | Manuals - Page 6
cleaning cookware, glassware and cutlery only, as described in these instructions. Alterations or conversions to the dishwasher, or using it for purposes other than those for which it is designed, are not permitted and could be dangerous. Miele cannot be held liable for damage caused by improper or - Miele PG 8056 | Manuals - Page 7
event of a damaged or leaking commercial dishwasher, turn it off immediately and contact Miele or an authorized Miele Service dealer. Faulty components may only be replaced by genuine Miele original parts. Only when these parts are fitted can Miele guarantee the safety standards of the appliance - Miele PG 8056 | Manuals - Page 8
user and can cause operational faults. The commercial dishwasher must not be used if the connecting cable is damaged. If the cable is damaged, it must be replaced with a special connecting cable available from Miele. For safety reasons, this may only be performed by the Miele Service Department - Miele PG 8056 | Manuals - Page 9
Foam escaping from the wash cabinet can cause damage to the dishwasher. If foam escapes, the program must be cancelled immediately. When using detergents and specialized products, it is essential that the manufacturer's instructions are followed. Detergents must only be used for the purpose they - Miele PG 8056 | Manuals - Page 10
INSTRUCTIONS Do not wash items soiled with ash, sand, wax, lubricants, or paint in the dishwasher. These substances could damage the dishwasher. Do not hose down the dishwasher Only use genuine Miele original spare parts and accessories with this dishwasher. Miele will provide you with the - Miele PG 8056 | Manuals - Page 11
gloves should be worn. Remove or disable the door lock prior to disposal of the dishwasher, so that children cannot become trapped inside (see "Caring for the environment"). Miele cannot be held liable for damage caused by failure to comply with these safety instructions and warnings. 11 - Miele PG 8056 | Manuals - Page 12
Appliance description Appliance overview a Door lock b Upper spray arm (not visible) c Runner for upper basket d Connection for upper basket spray arm e Lower spray arm f Runner for lower basket g Data plate h Rinse aid reservoir i Door lock barrel j Reservoir for reactivation salt k Dispenser for - Miele PG 8056 | Manuals - Page 13
a process in the user interface (not for canceling programs) g Start/Stop button For starting or canceling a program h OK button (acknowledgement) For selecting or confirming entries in the user interface i Optical interface Testing and transmission point for Miele service technicians. 13 - Miele PG 8056 | Manuals - Page 14
Users can be divided into two groups: - Daily operators - Experienced operators Access to "Additional settings" can be blocked to general, daily operators by using a code (see "Additional settings, Code"). Daily operators Daily operators must be instructed in operating and loading the dishwasher - Miele PG 8056 | Manuals - Page 15
name - The program stage / target temperature / actual temperature - The estimated time left for the program to run - Any relevant fault messages and information This dishwasher is operated exclusively via buttons on the control panel. Arranged to the side of the display, the buttons (button fields - Miele PG 8056 | Manuals - Page 16
Operation tips Menus The user interface of the commercial dishwasher is divided into menus. The menus are displayed in a 3-line menu without saving the entry. Multiple selection Release program 9 Normal ; 9 Normal plus , The and arrow buttons are used for navigating within the menu. - Miele PG 8056 | Manuals - Page 17
system message can be recalled by pressing OK during a program cycle. Example: Refill salt OK Automatic switch-off The dishwasher has an automatic switch-off function. The dishwasher switches itself off automatically after the time set. The display and all other LEDs are switched off. To switch - Miele PG 8056 | Manuals - Page 18
be confirmed using the OK button. If OK does not appear in the display, after a few seconds the display skips to the next level up. Fault messages In the event of a fault, a warning triangle is shown in place of the symbol. See "Frequently asked questions" for more information. 18 - Miele PG 8056 | Manuals - Page 19
selected values have a tick beside them. The commissioning process requires a set period of time which cannot be interrupted. The dishwasher will guide you automatically through the steps required. Reactivation is carried out during the first program following commissioning. If the first program - Miele PG 8056 | Manuals - Page 20
Commissioning Setting the temperature unit The display will change to the screen for setting the temperature unit. Temperature unit °C ( °F Setting the date format Setting the date Use the and arrow buttons to select the temperature unit you want and confirm your selection using the OK - Miele PG 8056 | Manuals - Page 21
gpg / 27°dH). It is useful to know your water hardness so that you can provide the service technician with this information in the event of any service calls. Enter the water hardness below gpg / °dH The dishwasher is programmed at the factory for a water hardness level of 20 gpg (19°dH)). Water - Miele PG 8056 | Manuals - Page 22
dishwasher cannot be connected to all available plumbing connections. If individual plumbing connections are turned off, they can only be reactivated by Miele Service OK Press the OK button. The dishwasher is now ready for use. M PROFESSIONAL PG 8056 The start screen is displayed for 3 seconds. - Miele PG 8056 | Manuals - Page 23
Opening and closing the door Opening the door The control panel also serves as a door handle. Grasp the handle underneath the control panel and lower the door to open. If the door is opened during operation all functions are automatically interrupted (see "Operation, Interrupting a program"). A - Miele PG 8056 | Manuals - Page 24
salt is required for reactivation and the degree of water hardness must be set on the dishwasher to ensure problem-free functioning of the water softener (see "Additional settings, Water hardness"). If the hardness of your water constantly lies under 4 gpg (4 °dH), no salt must - Miele PG 8056 | Manuals - Page 25
Filling the salt container Only a few more program cycles are possible, depending on the program selected and the water hardness set. The dishwasher is locked against operation if additional program cycles are run without salt being refilled. Salt container empty, K Program locked OK When - Miele PG 8056 | Manuals - Page 26
and the seal around it, and then close the flap. After refilling the salt reservoir, run the Rinse program immediately (without any cookware in the dishwasher) to remove any traces of salt from the cabinet. 26 - Miele PG 8056 | Manuals - Page 27
DOS module must be carried out only by Miele Service or by an authorized dealer. Refill rinse aid at the end of a program as soon as the message appears in the display. Refill rinsie aid K OK Confirm the message with the OK button. Normal plus - Miele PG 8056 | Manuals - Page 28
Adding rinse aid Adding rinse aid Open the door all the way. Unscrew the lid of the rinse aid reservoir. Add rinse aid only until it is up to the maximum mark on the edge of the reservoir. The rinse aid reservoir holds approx. 10 oz (300 ml). Screw the lid of the rinse aid reservoir back on - Miele PG 8056 | Manuals - Page 29
dishwasher. These substances will damage the dishwasher. Load the respective cookware and utensil into the appropriate places in the baskets, but observe the following instructions the baskets. If in doubt, test for free movement by manually rotating the spray arms. Make sure that small items - Miele PG 8056 | Manuals - Page 30
: - Wooden cutlery and cookware or items with wooden parts: these may discolor and fade. The glue used in these items is not dishwasher-proof and wooden handles may come loose after being washed in a dishwasher. - Craft items, antiques, valuable vases and decorative glassware: such items are - Miele PG 8056 | Manuals - Page 31
Application technology Upper basket Use the upper basket for small, lightweight and delicate items such as cups, saucers, glasses, dessert bowls etc. Light, heat resistant plastic items can also be loaded in the upper basket. Cup rack O 891 upper basket With insert E 810 for e.g. 20 cups, 33 - Miele PG 8056 | Manuals - Page 32
Application technology Adjusting the upper basket In order to gain more space for taller pieces of cookware in the lower or upper basket, the upper basket can be adjusted in between two positions with 2" (5 cm) between each position. Pull the upper basket out. Unscrew the fixing nuts on both - Miele PG 8056 | Manuals - Page 33
Application technology Depending on the setting of the upper basket, the following plate dimensions can be accommodated: Example upper basket O 891: Upper basket in position Upper Lower Upper basket plates Ø max. 5 1/8" (15 cm) max. 7 7/8" (20 cm) Lower basket plate Ø 13" (33 cm) * 9 3/4" (25 cm - Miele PG 8056 | Manuals - Page 34
Application technology Lower basket For larger and heavier items such as plates, serving platters, saucepans, bowls, etc. Always place thin, delicate glassware in the lower basket using a suitable insert or basket. U 890 lower basket For plastic trays, various inserts and cutlery inserts. U 890 - Miele PG 8056 | Manuals - Page 35
Application technology U 890 lower basket with an E 816 insert rotated by 90° With the E 165 cutlery insert, 16 plates with Ø 13" (33 cm) each and various cutlery can be loaded. Without the cutlery insert, 19 plates with Ø 13" (33 cm) each can be loaded into the rotated E 816 insert. 35 - Miele PG 8056 | Manuals - Page 36
of the items to be washed will determine which basket combination to use. For additional information on baskets please contact your Miele dealer or the Miele Service. Examples: (lower baskets) U 525 5-row wire basket The wire basket can be used for glasses with a maximum diameter of 3 1/8" (8 cm - Miele PG 8056 | Manuals - Page 37
Application technology Assembling a plastic tray U 534 - U 537 plastic trays with compartments for different glass heights In this example the plastic tray is connected to the top frame by long extenders. (for assembly in U 876 lower basket only) The height of the base basket can be altered by - Miele PG 8056 | Manuals - Page 38
Operation Adding detergent Only use detergent for commercial or residential dishwashers. The detergent can be dispensed in powder form via the powder detergent dispenser or in liquid form via the G 60 DOS module (Optional accessory - see " - Miele PG 8056 | Manuals - Page 39
Dispensing Operation Always follow the recommendations of the detergent manufacturer. There are markings to assist with dispensing: 20, 40. The marks indicate a level of approx. 20 or 40 ml (0.7 oz or 1.3 oz) when the door is open in the horizontal position. They also indicate the approx. level - Miele PG 8056 | Manuals - Page 40
liquid process chemicals. The DOS module comes with a separate installation manual. For more information on Miele DOS modules, please contact your Miele dealer or Miele Service. The color coding of the siphons helps to ensure correct dispensing. Miele use and recommend: Red: for rinse aid Blue: for - Miele PG 8056 | Manuals - Page 41
Observe the color coding. Wipe up any spilled process chemical thoroughly. Place the container on the floor beside the dishwasher or in an trouble-free operation, regular maintenance of the DOS module should be carried out at specified intervals only by Miele Service or an authorized Miele - Miele PG 8056 | Manuals - Page 42
the keypad Light-emitting diodes that indicate the status of the dishwasher are set into the keypad. Except for the Start/Stop button, which has a green LED in normal operation, all other LEDs light up yellow. In the event of a fault the Start/Stop button flashes red. Keypad (On/Off) button LED - Miele PG 8056 | Manuals - Page 43
button until the LED on the keypad lights up. Close the door. As soon as the dishwasher is ready for operation, the display changes to show the last selected program, e.g.: Normal plus Temperature Duration 55 °C 23 Min Selecting a program Choose your program according to the type of load and - Miele PG 8056 | Manuals - Page 44
Operation Program cycle display The selected program will be shown in the display, e.g.: Normal plus Temperature Duration 55 °C 23 Min The LED for the button will light up and display. The time remaining is shown in the third line of the display. Normal plus Main wash 1 Duration 23 Min 44 - Miele PG 8056 | Manuals - Page 45
Program finished will appear in the bottom line of the display. Normal plus Temperature Program finished 55 °C In addition, a buzzer will also sound "Settings, Buzzer tones." If the switch-off function is activated, the dishwasher switches itself off after a short time. Press the button to - Miele PG 8056 | Manuals - Page 46
only be interrupted if strictly necessary, e.g. if the wash load is moving significantly. Caution! The wash load and the interior of the dishwasher may be hot. Danger of scalding and burning. Open the door. The following message appears in the display: Program interrupted: K Door opened - Miele PG 8056 | Manuals - Page 47
started if absolutely necessary, e.g. if you want to change the program. In the event of a fault, the program will be cancelled automatically. Caution! The wash load and the interior of the dishwasher may be hot. Danger of scalding and burning. Press the Start/Stop button. The following will - Miele PG 8056 | Manuals - Page 48
Program chart Program Rapid Normal Plus When to use Powder detergent (if liquid detergent is not dispensed) Follow the manufacturer's recommendations "Quick program" for lightly soiled items that are in continual - Miele PG 8056 | Manuals - Page 49
Program cycle Program chart 1. Pre-wash X X X X 2. Pre-wash X X 3. Main wash (1) / (2) X 131°F (55°C) 30 s X 131°F (55°C) 2 min X 140°F (60°C) 3 min X 131°F (55°C) 1 min X 149°F (65°C) 3 min X 122°F (50°C) 1 min X 122°F (50°C) 1 min X 140°F (60°C) 2 min 4. Interim rinse X X X X X X 5. Interim - Miele PG 8056 | Manuals - Page 50
most efficient in terms of combined energy and water consumption for cleaning normally soiled crockery. 1.5 - 2 tbsp. (20 - 30 g) in the detergent dispenser Manual reactivation. This can be run to avoid being forced to run a reactivation program during busy periods. Use for rinsing heavily soiled - Miele PG 8056 | Manuals - Page 51
Program cycle Program chart 1. Pre-wash X 2. Pre-wash 3. Main wash (1) / (2) X 122°F (50°C) 5 min X 115°F (46°C) 10 min Reactivation cycle 4. Interim rinse X X X X 5. Interim rinse (X) (X) 6. Final rinse (1) / (2) X 140°F (60°C) 1 min X 122°F (50°C) 2 min X = sections included in a program - Miele PG 8056 | Manuals - Page 52
dispenser, with the result that it is not fully dispensed. Turn the dishwasher on with the button. Select the program you require (see "Operation When you have entered the start time, press the Start/Stop button. Normal plus Temperature Turn on at 55 °C 12:30 The selected program, along with - Miele PG 8056 | Manuals - Page 53
. After that, the display will show the following, for example: Menu Settings Additional settings If the button is pressed in this menu, the dishwasher will revert to normal operation. Select the Settings option and open the menu for this by pressing the OK button. - Delay start Switch delay - Miele PG 8056 | Manuals - Page 54
Settings Menu structure The factory defaults for the menu structure are shown. Menu 1. Delay start 2. Language 3. DOS venting 4. Date 1. Submenu No Yes German English (US) etc. DOS1 DOS4 Date format 5. Time of day Set Setting Display 6. Volume Clock format Keypad tone Audio signals 2. - Miele PG 8056 | Manuals - Page 55
Settings Delay start You can select whether delay start appears in the Additional Functions menu or not. Selecting No will remove delay start from the Additional Functions menu for operators. To be able to delay the start of a program, Yes must be selected in order for it to be displayed in - Miele PG 8056 | Manuals - Page 56
Settings Setting the language The language set will be used in the display. The flag after the word "Language" acts as a guide if a language which you do not understand has already been set. If this is the case, keep selecting the option which has a flag after it - Miele PG 8056 | Manuals - Page 57
priming DOS1 DOS4 Select the dispensing system to be vented using the and arrows and confirm your choice with the OK button. The dishwasher will then start to vent the selected dispensing system automatically. As soon as this is completed, Dispensing system successfully primed will appear in - Miele PG 8056 | Manuals - Page 58
Settings Date format Set Setting the date Select the Settings menu. Select Date and confirm the entry with the OK button. In the following menu, you can choose between: Date Date format Set - Date format This option offers two variations for date format. - Set This option is used to set the - Miele PG 8056 | Manuals - Page 59
Set the time of day. - Display Time of day displayed when the dishwasher is turned off. - Time format Set the clock format. The dishwasher does not automatically adjust between summer and winter time. This must be done manually by the operator as required. Set Select Set and confirm the entry - Miele PG 8056 | Manuals - Page 60
Settings Display Clock format If required, the time of day can be displayed when the dishwasher is turned off. Select Display and confirm the entry with the OK button. The following options are available: Display Do not display ( ; On , - Do not - Miele PG 8056 | Manuals - Page 61
Keypad tone Buzzer tones Settings Regulating the volume The dishwasher has audible tones which sound when buttons on the keypad are pressed, at the end of a program, and when there are system messages. Select the - Miele PG 8056 | Manuals - Page 62
Settings Setting the volume The volume is always set in the same way. The display is also similar, e.g.: Keypad tone z Quieter Louder Set the volume using the arrow buttons (louder) and (quieter). The volume level is represented by a bar graph. On the lowest setting the tone is turned - Miele PG 8056 | Manuals - Page 63
Additional settings If the button is pressed in this menu, the dishwasher will revert to normal operation. Select Additional settings and press OK to be protected with a PIN code (see "Additional settings, Code"). - Code PIN code assignment and settings (see "Code") - Log book Displays - Miele PG 8056 | Manuals - Page 64
Additional settings - Display Adjustment of the display contrast and brightness (see "Display") - Switch off after Automatic switch-off can be activated or deactivated (see "Switch off after") - Factory default Reset of all parameters to the factory default settings (see "Factory default") - - Miele PG 8056 | Manuals - Page 65
Additional functions 1. Submenu 2. Submenu Release Change PIN code Additional settings Enter PIN code Consumption: water Consumption: detergent Consumption: rinse aid Operating hours Program cycles Service interval °C °F 1. Rapid 2. Normal Plus 3. Sanitize etc. Reset Yes No Increased - Miele PG 8056 | Manuals - Page 66
Additional settings Menu 8. Display view 9. Display 10. Turn off after 11. Factory default 1. Submenu Actual temperature Required temperature Contrast Brightness Yes No Reset 12. Software version EB Id: XXXX EGL Id: XXXX EZL Id: XXXX EFU Id: XXXX 2. Submenu Set the contrast Set the - Miele PG 8056 | Manuals - Page 67
unauthorized access to various functions and system settings on the dishwasher. Select the Additional settings menu. Select Code and press OK to open the relevant menu. - Release Restrict access to the Additional settings menu to users with administrative rights only, or allow access to all - Miele PG 8056 | Manuals - Page 68
set at the factory to 8 0 0 0 if access in Additional settings is blocked. In this instance, the display will show the following message: Enter code 0 000 Use the and arrow buttons to enter the numerical values and confirm each one with the OK button. Each press of the OK button - Miele PG 8056 | Manuals - Page 69
the consumption levels for water, detergent and rinse aid. They also calculate the number of hours the dishwasher has been run and the number of programs that have been run and measure the service intervals. Select the Additional settings menu. Select Log book and press OK to open the relevant - Miele PG 8056 | Manuals - Page 70
Additional settings Temperature unit The temperature can be shown in the display in degrees Celsius or degrees Fahrenheit. Select the Additional settings menu. Select Temperature unit and confirm the entry with the OK button. Temperature unit °C ( °F - °C The temperature is displayed in degrees - Miele PG 8056 | Manuals - Page 71
to move, and then confirm your choice with the OK button. The program you select will be marked with a check . 1. Move program 1. Rapid ( ; 2. Normal plus , Use the and buttons to select the position you want to move it to and confirm your choice with the OK button. Moving a program - Miele PG 8056 | Manuals - Page 72
level Increase in the amount of water used in all wash programs - Interim rinse Introduction of an interim rinse to all programs that support this feature (see "Program chart") - Dispensing system Venting of the dispensing systems and naming of the DOS modules - Temperature / Time Change in the - Miele PG 8056 | Manuals - Page 73
Additional settings Increased water level Select the Increased water level option and confirm your choice with the OK button. The amount of water is shown in liters and can be increased in 0.5 liter (1 pint) increments up to 1.5 liters (1 1/2 quarts). Increased water level 0,0 l (0,0 1,5 l) - Miele PG 8056 | Manuals - Page 74
Additional settings DOS dispensing systems Select the Dispensing system option and confirm your choice with the OK button. Dispensing system DOS 2 Rinsing aid ; DOS1 , Select the dispensing system you want and confirm your choice with the OK button. The following settings are available: - Miele PG 8056 | Manuals - Page 75
filled and the dispensing siphons are screwed securely to the containers. Select DOS priming and confirm the entry with the OK button. The dishwasher will now start the automatic venting process of the dispensing system. Dispensing system DOS priming will appear in the display. As soon as the - Miele PG 8056 | Manuals - Page 76
name is shown on the second line of the display. This can be changed using the options shown in the bottom line. DOS is a set part of the name and cannot be changed. The top line shows which option has been selected. Navigate using the arrow buttons to shift the cursor - Miele PG 8056 | Manuals - Page 77
in some programs (see "Program chart"). Select Temperature / Time and confirm the entry with the OK button. Select program Normal ; Normal plus , The following options are available: Normal Reset ; Main wash 1 , - Reset This resets values changed in a program back to their factory - Miele PG 8056 | Manuals - Page 78
Additional settings Main wash / Final rinse The procedure for altering settings in Main wash 1 and Final rinse 1 is the same. The display also looks similar. Select the Main wash 1 or Final rinse 1 option and confirm the entry with the OK button. Final rinse temperature Normal Final rinse - Miele PG 8056 | Manuals - Page 79
Holding time Additional settings Select Holding time and confirm the entry with the OK button. The holding time is set in minutes and can be set between 0 and 10 minutes in 1 minute increments. In the case of the Rapid program, the holding time is entered in seconds and can be changed from 0 to - Miele PG 8056 | Manuals - Page 80
possibility for determining which individual programs can be blocked. Select Selection and confirm the entry with the OK button. Release program 9 Rapid ; 9 Normal plus , Select the programs that you want to block and press the OK button. The check will be removed from the box and the - Miele PG 8056 | Manuals - Page 81
the water hardness fluctuates (e.g. 16-28 gpg / 15-27°d), always program the dishwasher to the higher value (in this example, 28 gpg / 27°d). If the hardness so that you can provide the service technician with this information in the event of any service calls. Enter the water hardness below - Miele PG 8056 | Manuals - Page 82
Additional settings Settings table °dH gpg mmol/l Display 1 1 0.2 1 2 2 0.4 2 3 3 0.5 3 4 4 0.7 4 5 5 0.9 5 6 6 1.1 6 7 7 1.3 7 8 8 1.4 8 9 9 1.6 9 10 10 1.8 10 11 11 2.0 11 12 12 2.2 12 13 13 2.3 13 14 14 2.5 14 15 15 2.7 15 16 16 - Miele PG 8056 | Manuals - Page 83
Additional settings Display view During a program, the actual or target temperature can be shown in the second line of the display. Select the Additional settings menu. Display view Actual temperature Required temperature ( Select Display view and press OK to open the relevant menu. The - Miele PG 8056 | Manuals - Page 84
Additional settings Display The display menu can be used for altering the display contrast and brightness. Select the Additional settings menu. Display Contrast Brightness Contrast Select Display and press OK to open the relevant menu. The following settings are available: - Contrast Set the - Miele PG 8056 | Manuals - Page 85
Brightness Additional settings Select the Brightness option and confirm your choice with the OK button. The brightness range is shown as a bar graph in the display. Brightness { Darker Brighter Use the arrow buttons (brighter) (darker) to set the brightness you want and confirm your - Miele PG 8056 | Manuals - Page 86
Additional settings Switch off after When not in use, the dishwasher will turn itself off to save energy. Select the Additional settings menu. Select Switch off after and press OK to open the relevant menu. The - Miele PG 8056 | Manuals - Page 87
default setting can be used to reset all changed parameters in the dishwasher back to their default settings or just values that have been changed . - All settings All parameters that have been altered in the dishwasher will be reset to their default settings. Select the option you want and confirm - Miele PG 8056 | Manuals - Page 88
relay board. - EFU Id: XXXX The software version of the frequency converter. Alterations and updates to software can only be carried out by an authorized Miele service technician. 88 - Miele PG 8056 | Manuals - Page 89
conditioner can be used after cleaning (e.g., Neoblank, which can be obtain from Miele Service). Do not use cleaning agents containing ammonia or thinners! These agents can damage the surface material. Do not hose down the dishwasher or its direct vicinity to clean it, e.g. with a water hose or - Miele PG 8056 | Manuals - Page 90
wash cabinet retains coarse soil from the suds solution, preventing it accessing the circulation system and causing blockages in the spray arms. This dishwasher must not be used without all the filters in place! The filters must be checked regularly and cleaned when necessary. Caution! Danger of - Miele PG 8056 | Manuals - Page 91
Cleaning the flat and micro-fine filters Remove the coarse filter. Cleaning and care Grasp the micro-fine filter by the upper rim and turn it in the direction of the arrow to release it. Then lift it out. Remove the flat filter. Rinse the filters thoroughly under running water. If - Miele PG 8056 | Manuals - Page 92
of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly. Turn the dishwasher off. Pull the upper spray arm downwards to remove it. The middle and bottom spray arms are secured with a bayonet fitting. The bayonet fitting - Miele PG 8056 | Manuals - Page 93
Cleaning and care Use a pointed object to push food particles that are stuck in the spray arm jets into the spray arm. Rinse the spray arms thoroughly under running water. Replace the spray arms and check that they rotate freely. Make sure that the spray arm with the yellow bayonet fitting is - Miele PG 8056 | Manuals - Page 94
to unnecessary service visits where the problem could have been rectified as described in these operating instructions. Repair breaker trips again, contact Miele Customer Service. Before fixing the fault: Turn the dishwasher off with the button. There is a problem with the water intake. - Miele PG 8056 | Manuals - Page 95
the drain hose. There may be a technical fault. After a 10 seconds: Turn the dishwasher back on. Select the desired program. Press the Start/Stop button. If the error message is displayed again, there is a technical fault. Contact Miele Service. The waterproof system has reacted. Close the - Miele PG 8056 | Manuals - Page 96
dishwasher Problem Possible cause and solution The dishwasher fails to react when buttons are pressed. The display and indicator lights remain dark. The dishwasher energy. Press the button to turn the dishwasher back on. The following fault The salt reservoir cover is not properly closed. - Miele PG 8056 | Manuals - Page 97
Frequently asked questions Noises Problem There is a knocking noise in the wash cabinet. There is a rattling noise in the wash cabinet. There is a by the installation or the diameter of the water pipe. This has no effect on the functioning of the dishwasher. If in doubt, contact a plumber. 97 - Miele PG 8056 | Manuals - Page 98
Frequently asked questions Poor cleaning results Problem The dishes are not clean. Smearing appears on Please observe the instructions in "Loading the dishwasher." The program was not suitable for the requirements. Select a more suitable program (see "Program guide)". Not enough detergent was - Miele PG 8056 | Manuals - Page 99
questions Problem White off. Tea or lipstick stains have not been completely removed. Plastic parts are discolored. There are rust stains on the cutlery. Possible cause their original color. The "Cold" program was not run after dishwasher salt was added. Traces of salt have gotten into the wash - Miele PG 8056 | Manuals - Page 100
inlet valve contains an electrical component. It must not be dipped in water. To clean the filter Disconnect the dishwasher from the water supply and the electrical supply (turn the dishwasher off, unplug it or disconnect or disable the fuse). Close the faucet. Unscrew the water inlet valve - Miele PG 8056 | Manuals - Page 101
and rinse well under running water. Make sure that the vent on the external part of the non-return valve is not blocked. (This vent is only visible when the non-return valve has been taken out of the dishwasher). If it is blocked, use a pointed object to release the blockage. 101 - Miele PG 8056 | Manuals - Page 102
Frequently asked questions The drain pump is situated under the non-return valve (see arrow). Check the area around the drain pump for foreign objects (watch out for glass splinters which could cause injury) and remove them before replacing the non-return valve. Carefully replace the non-return - Miele PG 8056 | Manuals - Page 103
despite following the instructions in this manual, you are unable to rectify a problem please contact one of the following, quoting the fault code shown in the display: - your Miele dealer or - the Miele Technical Service Department. Contact details for the Miele Technical Service Department can be - Miele PG 8056 | Manuals - Page 104
- Miele PG 8056 | Manuals - Page 105
Installation instructions Information is subject to change. Please refer to our Website to obtain the most current product specification and technical and warranty information. To prevent accidents and machine damage, read these instructions before installation or use. 105 - Miele PG 8056 | Manuals - Page 106
Caring for the environment Disposal of packaging material The packaging is designed to protect the dishwasher from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any - Miele PG 8056 | Manuals - Page 107
the appliance must be compensated for by adjusting the four feet. If the dishwasher is to be installed next to other appliances or furniture or in a 60 cm) deep. To ensure the stability of undercounter commercial dishwashers, they must only be installed beneath a continuous countertop that is - Miele PG 8056 | Manuals - Page 108
door open, screw into the counter through the holes in the front trim on the left and right hand sides of the dishwasher. With stainless steel or stone counters; the dishwasher must be secured at the sides to the left and right adjacent cupboards with two screws on each side. Special screws - Miele PG 8056 | Manuals - Page 109
increase safety, it is recommended that the machine be connected to a ground fault circuit breaker with a tip current of 30 mA. - If necessary, equipotential carried out. - The power cord may only be replaced by an original Miele part. - For technical data, see the data plate or the attached wiring - Miele PG 8056 | Manuals - Page 110
(overpressure). If the water pressure does not lie in the 29-145 psi / 200-1000 kPa range, ask Miele how to proceed. - The dishwasher is supplied as standard for connection to cold water (blue-coded hose) and hot water up to 149°F (65°C) (redcoded hose). Connect the inlet hoses to the cold and - Miele PG 8056 | Manuals - Page 111
Plumbing Do NOT shorten or otherwise damage the inlet hoses (see diagram). Also refer to the supplied installation diagram! 111 - Miele PG 8056 | Manuals - Page 112
water drain - The drain is equipped with a non-return valve which prevents waste water from flowing back into the dishwasher through the drain hose. - The dishwasher should preferably be connected to a separate onsite drainage system. If no separate connection is available, we recommend connection - Miele PG 8056 | Manuals - Page 113
104°F (40°C) Approx. 67" (1.7 m) Approx. 58 1/2" (1.5 m) Built-under appliance with wooden beam in front of plinth in Short program 59 dB(A) 47 dB(A) UL 749 Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany 113 - Miele PG 8056 | Manuals - Page 114
- Miele PG 8056 | Manuals - Page 115
- Miele PG 8056 | Manuals - Page 116
serial number of your appliance available before contacting Technical Service. U.S.A. Miele, Inc. National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-991-9380 609-419-9898 Fax: 609-419-4241 www.mieleusa.com Technical Service & Support Nationwide Phone: 800-991-9380 Fax: 800-220
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
 |
 |
Operating instructions
Commercial dishwasher
PG 8056
To prevent accidents and machine
damage, you absolutely
must
read
these instructions before installation
or use.
en - US
M.-Nr. 09 981 900