Miele W 3033 W3000 Washers
Miele W 3033 Manual
 |
View all Miele W 3033 manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele W 3033 manual content summary:
- Miele W 3033 | W3000 Washers - Page 1
Product Dimensions Large Capacity Washing Machine Angled control W3033 / W3035 E 23 1/2" W D 22 1/2" 21 1/2" 33 3/8" - Dimensions" sheet for undercounter or built-in space requirements • Remove transport struts in rear of machine before installation. NOTE: Drawing is not to scale. SPECIFICATION - Miele W 3033 | W3000 Washers - Page 2
Dimensions Large Capacity Washing Machines Flat controls - Decor Unit W3039i E 23 1/2" W D 22 1/2" Decor White 33 Dimensions" sheet for undercounter or built-in space requirements • Remove transport struts in rear of machine before installation. NOTE: Drawing is not to scale. SPECIFICATION - Miele W 3033 | W3000 Washers - Page 3
to duct or drain location. Notes • Needed depth will vary by model number: W3033-W3035: 24" minimum W3039i: 25" minimum • Typically requires removal of unit's lid. Out of box unit height dimension withoutlid is 32 5/16" - 32 11/16". NOTE: Drawing is not to scale. SPECIFICATION SHEETS 08262011 - Miele W 3033 | W3000 Washers - Page 4
Product Dimensions Laundry Stand WTS410 - White Only 11" 22" 23 3/8" Notes • For use with both large and super capacity washers or tumble dryers. • All installations must be done in accordnace with local codes NOTE: Drawing is not to scale. SPECIFICATION SHEETS 08262011 - Miele W 3033 | W3000 Washers - Page 5
water intake hoses connect upper left rear. Notes • All installations must be done in accordance with local codes • See "Cut-out Dimensions" sheet for undercounter or built-in space requirements • Remove transport struts in rear of machine before installation. • WTV 407 Stacking kit for W3033 - Miele W 3033 | W3000 Washers - Page 6
In certain installations, notches will be required to accomodate the hinges in the front panel. Control Panel Miele Decor Laundry 3 7/8" C 16 3/4" C To center lines Note: To insure access to customer servicable features, a minimum 4" toe kick above finished floor (AFF) is required. Notch Pattern
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS
0
8262011
Product Dimensions
Large Capacity Washing Machine
Angled control
W3033 / W3035
2"
23 1/2"
33 3/8" - 34 1/8"
22 1/2"
D
W
E
3 3/4" - 4 1/2"
21 1/2"
D -
E -
W -
5 foot flexible drain hose connects
upper left rear.
120 Volt, 15 Amp 5 foot molded plug
power supply connects upper left rear
(NEMA 5-15 Configuration).
5 foot separate flexible hot and cold
water intake hoses connect upper left
rear.
Location Codes
Notes
•
All installations must be done in accordance with local codes
•
See "Cut-out Dimensions" sheet for undercounter or built-in space requirements
•
Remove transport struts in rear of machine before installation.