NEC C431 Installation Guide
NEC C431 Manual
 |
View all NEC C431 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC C431 manual content summary:
- NEC C431 | Installation Guide - Page 1
C431 Installation Guide 43" LCD Display NEC Display Solutions of America, Inc. Rev 1.1 Contents: Product Description and Notes Tilt Angle and Rotation Ventilation Recommendations Display Dimensions Display (see "Aspect Modes" in menus and user manual). • Distances are in inches, for millimeters - NEC C431 | Installation Guide - Page 2
C431 Installation Guide 43" LCD Display NEC Display Solutions of America, Inc. Rev 1.1 Ventilation Recommendations: Dimensions below are recommended for proper ventilation when the unit is in a recessed area. NOTE: The ventilation space - NEC C431 | Installation Guide - Page 3
C431 Installation Guide 43" LCD Display Display dimensions: NEC Display Solutions of America, Inc. Rev 1.1 www.necdisplay.com C431 Page 3 of 9 - NEC C431 | Installation Guide - Page 4
C431 Installation Guide 43" LCD Display Display dimensions (cont.): NEC Display Solutions of America, Inc. Rev 1.1 www.necdisplay.com C431 Page 4 of 9 - NEC C431 | Installation Guide - Page 5
C431 Installation Guide 43" LCD Display Display Dimensions (with ST-401 stand): NEC Display Solutions of America, Inc. Rev 1.1 NOTE: The ST-401 optional stand attaches to the VESA hole pattern on the back of the display www.necdisplay.com C431 Page 5 of 9 - NEC C431 | Installation Guide - Page 6
C431 Installation Guide 43" LCD Display Optional Table Top Stand Dimensions (ST-401): NEC Display Solutions of America, Inc. Rev 1.1 NOTE: The Pole of the ST-401 stand connects directly to the VESA hole pattern on the back of the display. www.necdisplay.com C431 Page 6 of 9 - NEC C431 | Installation Guide - Page 7
C431 Installation Guide 43" LCD Display NEC Display Solutions of America, Inc. Rev 1.1 Dimensions of Optional Wall Mount Kit (WMK-4655S): www.necdisplay.com C431 Page 7 of 9 - NEC C431 | Installation Guide - Page 8
C431 Installation Guide 43" LCD Display Control Codes: NEC Display Solutions of America, Inc. Rev 1.1 NOTE: Contact your NEC rep for codes not listed. Cable Connection: Communication Protocol: Interface: Communication System: Baud Rate: Data Length: Parity: Stop Bit Communication Code: RS-232C - NEC C431 | Installation Guide - Page 9
C431 Installation Guide 43" LCD Display Input Panel (Bottom) NEC Display Solutions of America, Inc. Rev 1.1 Input Panel (Side - Rotated) Browser Control Information and control can also be available through the HTTP browser control menu. In order to accomplish this, type: http://
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
NEC Display Solutions of America, Inc.
C431 Installation Guide
43” LCD Display
Rev 1.1
www.necdisplay.com
C431
Page 1 of 9
Contents:
Product Description and Notes
Page 1
Tilt Angle and Rotation
Page 1
Ventilation Recommendations
Page 2
Display Dimensions
Page 3-4
Display Dimensions with stand
Page 5
Optional Table Top Stand Dimensions
Page 6
Dimensions of Optional Wall Mount (WMK-3255S)
Page 7
Control Codes
Page 8
Input Terminals
Page 9
Browser Control
Page 9
Product Description
C431
Display Resolution
1920 x 1080 @ 60Hz
Maximum Supported Resolution
1920 x 1080 @ 60Hz
Power Consumption (Typical)
50W
Power Consumption (Max Brightness)
65W
Power Consumption (Overall Max)*
90W
BTU's (Typical)
170.61 BTU/hr
BTU’s (Max Brightness)
221.79 BTU/hr
BTU’s (Overall Max)*
307.09 BTU/hr
Net Dimensions
38.2 x 22.0 x 1.8 in.
970.7 x 558.9 x 45.0mm
Net Weight
27.6lbs. / 12.5kg
*Overall Max refers to when the unit is at max brightness and the following features are also active: OPS Slot, External Speaker, Raspberry Pi
Compute Module Slot
NOTES:
•
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
•
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
•
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
•
Distances are in inches, for millimeters multiply by 25.4.
Tilt Angle and Rotation
Monitor may be angled and rotated from normal landscape and portrait orientation to both face up and face down positioning.
Rotate
only clockwise for portrait orientation.
For Face Up or Face Down orientation, operating temperature must be <35C