NEC EA245WMi-BK Users Manual
NEC EA245WMi-BK Manual
 |
View all NEC EA245WMi-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC EA245WMi-BK manual content summary:
- NEC EA245WMi-BK | Users Manual - Page 1
Desktop Monitor MultiSync EA245WMi User's Manual Please find your model name in the label on the backside of monitor. - NEC EA245WMi-BK | Users Manual - Page 2
and Maintenance English-3 Ergonomics ...English-4 Cleaning the LCD Panel...English-4 Cleaning the Cabinet...English-4 Contents ... fications ...English-20 Features ...English-21 Troubleshooting ...English-22 Using the Zoom Function ...English-24 Human sensing function...English-25 Using the - NEC EA245WMi-BK | Users Manual - Page 3
avoid any problems. CAUTION: Please use the power cord provided with this display in serviced in the country where it was purchased. Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. ErgoDesign is a registered trademark of NEC Display - NEC EA245WMi-BK | Users Manual - Page 4
been tested and instructions Problems NEC Display Solutions of America, Inc. Address: 500 Park Boulevard, Suite 1100 Itasca, Illinois 60143 Tel. No.: (630) 467-3000 Type of Product: Display Monitor Equipment Classification: Class B Peripheral Model: MultiSync EA245WMi (EA245WMi, EA245WMi-BK - NEC EA245WMi-BK | Users Manual - Page 5
LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable does not operate normally by following operating instructions. • Allow adequate ventilation around the monitor image. NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver - NEC EA245WMi-BK | Users Manual - Page 6
YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for the display to warm up. • Adjust the monitor height so that the top of you to see your screen, use an anti-glare filter. • Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning solution - NEC EA245WMi-BK | Users Manual - Page 7
need to re-pack the monitor. To connect the LCD monitor to your system, follow these instructions: Figure 1 NOTE: Make sure to read "Recommended Connect a 15-pin mini D-SUB signal cable to the connector of the display card in your system (Figure A.3). For a MAC with Thunderbolt output: Connect - NEC EA245WMi-BK | Users Manual - Page 8
cord from a USB device, plug into the downstream port of the monitor. NOTE: Incorrect cable connections may cause abnormal operation, damage display quality/components of LCD module and/or shorten the module's life. NOTE: Use an audio cable without a built-in resistor. Using an audio cable with - NEC EA245WMi-BK | Users Manual - Page 9
ADJUST (Analog input only) Refer to the Controls section of this User's Manual for a full description of these OSD controls. NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual. Figure E.1 Power key Raise and Lower Monitor Screen The monitor may be - NEC EA245WMi-BK | Users Manual - Page 10
Arm Installation This LCD monitor is designed for use with a flexible arm. To prepare the monitor for alternate mounting purposes: • Follow the instructions provided by the manufacturer of the display mount. • To meet the safety requirements, the mounting stand must be able to support the weight of - NEC EA245WMi-BK | Users Manual - Page 11
English Mount Flexible arm This LCD monitor is designed for use with a flexible arm. 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using the specified 4 screws, attach the arm to the monitor (Figure F.1). Spring washer - NEC EA245WMi-BK | Users Manual - Page 12
copied and sent to the connected sub monitor(s) automatically. 3. Up to 24 sub monitors can be daisy-chained via ControlSync. NOTE: Connect the Yes HOT KEY Yes SIGNAL INFORMATION Yes SENSOR INFORMATION Yes KEY GUIDE Yes DATA COPY No CUSTOMIZE SETTING No CARBON SAVINGS No CARBON - NEC EA245WMi-BK | Users Manual - Page 13
setting. NOTE: Monitors should be connected by the included DisplayPort cable. Using the same display model is strongly recommended for connecting multiple monitors. Please contact your display card supplier for detailed information. BIT RATE Maximum number of connectable monitors MST (multi - NEC EA245WMi-BK | Users Manual - Page 14
on the computer. NOTE: MST (multi-stream transport) and SST (single-stream transport) requires the corresponding display card. Check to make sure that the display card supports MST (multi-stream transport). Contact your supplier for detailed information. NOTE: Monitors should be connected by the - NEC EA245WMi-BK | Users Manual - Page 15
English Controls OSD (On-Screen Display) control keys on the front of the monitor function are as follows: To access OSD menu, touch any of the control keys. To change signal - NEC EA245WMi-BK | Users Manual - Page 16
ECO MODE Decreases the amount of power consumption by reducing the brightness level. OFF: No function. 1: Sets brightness variable range from 0% to 60%. This setting can adjust brightness to a range in which power is reduced by 20% compared to the maximum brightness setting. 2: Sets brightness - NEC EA245WMi-BK | Users Manual - Page 17
for non-standard video inputs. LEFT / RIGHT Controls horizontal image position within the display area of the LCD. DOWN / UP Controls vertical image position within the display area of the LCD. H.SIZE (Analog input only) Adjusts the horizontal size by increasing or decreasing this setting. If - NEC EA245WMi-BK | Users Manual - Page 18
tuning can be performed by using the "FINE" function. For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would that may occur throughout the display area of the screen. These variations are characteristic of LCD panel technology. This function improves - NEC EA245WMi-BK | Users Manual - Page 19
color space. With this color-supported environment, the operator could easily situations. NATIVE: Original color presented by the LCD panel that is unadjustable. L/B (LOW BLUE MST (multi-stream transport), same image is displayed at each monitor. AUTO: Displays in SST (single-stream transport) or - NEC EA245WMi-BK | Users Manual - Page 20
INPUT MENU" after changing the input. SENSOR INFORMATION If you select "ON", monitor displays "HUMAN SENSOR ON" message. If you select "OFF", monitor doesn't display "HUMAN SENSOR ON" message. KEY GUIDE If you select "ON", the Key Guide appears on screen when the OSD menu is accessed. English-18 - NEC EA245WMi-BK | Users Manual - Page 21
initial setting is based on the OECD (2008 Edition). CURRENCY SETTING: Displays electricity pricing in 6 currency units. CURRENCY CONVERT SETTING: Displays electricity savings in kW/hour (US Currency is default). NOTE: This model's initial setting is "Currency = US$" and its Currency Convert setting - NEC EA245WMi-BK | Users Manual - Page 22
MultiSync EA245WMi Notes LCD Module Diagonal: 61.13 cm/24 inches Viewable Image Size: 61.13 cm/24 inches Native Resolution (Pixel Count): 1920 x 1200 Active matrix; thin film transistor (TFT) liquid crystal display (LCD Resolutions Supported 720 x 400*1: VGA text Some systems may not support - NEC EA245WMi-BK | Users Manual - Page 23
supported) directly to your computer, automatically optimizing display display card's scanning frequency, thus displaying the resolution required. VESA Standard Mounting Interface: Allows users to connect your MultiSync unique algorithm developed exclusively by NEC for its monitors. ControlSync: - NEC EA245WMi-BK | Users Manual - Page 24
: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving cable should be completely attached. • LCD brightness degradation occurs due to long-term supported mode has been selected on the display card or system being used. (Please consult display card or system manual - NEC EA245WMi-BK | Users Manual - Page 25
. Refer to your USB device User's Manual. • Check if the USB upstream port 24 sub monitors via ControlSync. No picture in multiple monitor connection • Check to make sure that the resolution has been lower than the recommended resolution setting. • Check to make sure that the display card supports - NEC EA245WMi-BK | Users Manual - Page 26
the Zoom Function Allows you to use the entire screen area, significantly expanding the size. Allows the picture displayed in the center to expand. SETUP 1. Select FULL or ASPECT in EXPANSION to activate the Zoom function (see (see page 15). Move to left or right Move upward or downward English-24 - NEC EA245WMi-BK | Users Manual - Page 27
a notification on the screen after the period of time. You can set notification screen at SENSOR INFORMATION (see page 18). C. After displaying a notification, If LIGHT is set at HUMAN SENSING, the monitor screen gets gradually darker then becomes 0% brightness in the end. If DEEP is set - NEC EA245WMi-BK | Users Manual - Page 28
Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient lighting within the room. If the room is bright, the monitor - NEC EA245WMi-BK | Users Manual - Page 29
of the product and country-specific information on recycling facilities can be found on our following websites: http://www.nec-display-solutions.com/greencompany/ (in Europe), http://www.nec-display.com (in Japan) or http://www.necdisplay.com (in USA). Energy Saving This monitor features an advanced
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
 |
 |
Desktop Monitor
MultiSync EA245WMi
User’s Manual
Please find your model name in the label on the backside of monitor.