NEC NP-ME382U User Manual - English

NEC NP-ME382U Manual

Get NEC NP-ME382U PDF manuals and user guides View all NEC NP-ME382U manuals
Add to My Manuals
Save this manual to your list of manuals

NEC NP-ME382U manual content summary:

  • NEC NP-ME382U | User Manual - English - Page 1
    site for User's Manual in the latest version: https://www.nec-display.com/dl/en/pj_manual/lineup.html • The ME342U, MC332W, MC422X, MC342X and MC302X are not distributed in North America. Model No. NP-ME382U/NP-ME342U/NP-ME372W/NP-MC382W/NP-MC332W/NP-ME402X/NP-MC422X/NP-MC372X/ NP-MC342X/NP-MC302X
  • NEC NP-ME382U | User Manual - English - Page 2
    is used under license. • APP Store is a service mark of Apple Inc. • Microsoft, Windows, Windows Remote are trademarks or registered trademarks of NEC Display Solutions, Ltd. in Japan, in .pdf" in the "about GPL&LGPL" folder on the supplied CDROM. NOTES (1) The contents of this user's manual may
  • NEC NP-ME382U | User Manual - English - Page 3
    this manual carefully before using your NEC projector and keep the manual handy ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the provided. The information should be read carefully to avoid problems. WARNING: TO PREVENT FIRE OR SHOCK, DO NOT
  • NEC NP-ME382U | User Manual - English - Page 4
    specified by NEC Display Solutions of America, Inc. in this manual. Failure to contact your supplier. Important Safeguards These safety instructions are to ensure the long life of your addition, the ceiling must be strong enough to support the projector and the installation must be in accordance
  • NEC NP-ME382U | User Manual - English - Page 5
    a wire or screwdriver into your projector. If something should fall into your projector, disconnect it immediately and have the object removed by a qualified service personnel. • Do not place any objects on top of the projector. • Do not touch the power plug during a thunderstorm. Doing so can cause
  • NEC NP-ME382U | User Manual - English - Page 6
    the power cord and have the projector serviced by a qualified service personnel. • Handle the power cord carefully operate normally when you follow the instructions described in this user's manual. - If the projector has law. FOR MORE INFORMATION, CONTACT: NEC Display Solutions of America, Inc. 3250
  • NEC NP-ME382U | User Manual - English - Page 7
    dispose according to Local, State or Federal Laws. Lamp Replacement • Use the specified lamp for safety and performance. • To replace the lamp, follow all instructions provided on page 111. • Be sure to replace the lamp and filter when the message [THE LAMP HAS REACHED THE END OF ITS USABLE LIFE
  • NEC NP-ME382U | User Manual - English - Page 8
    Important Information Power management function The projector has power management functions. To reduce power consumption, the power management functions (1 and 2) are factory preset as shown below. To control the projector from an external device via a LAN or serial cable connection, use the on-
  • NEC NP-ME382U | User Manual - English - Page 9
    Important Information i 1. Introduction...1 ❶ What's in the Box?...1 ❷ Introduction to the Projector 2 Features you'll enjoy 2 About this user's manual 3 ❸ Part Names of the Projector 4 Front/Top...4 Rear...5 Top Features...6 Terminal Panel Features 7 ❹ Part Names of the Remote Control
  • NEC NP-ME382U | User Manual - English - Page 10
    Table of Contents ❼ Operating Your Computer's Mouse Functions from the Projector's Remote Control via the USB Cable (Remote Mouse Function 33 ❽ Projecting Your Computer's Screen Image from the Projector via the USB Cable (USB Display)...34 9 Projecting an Image from an Angle (Geometric Correction
  • NEC NP-ME382U | User Manual - English - Page 11
    ❹ Replacing the Lamp and the Filter 111 9. Appendix...116 ❶ Troubleshooting...116 Feature of each indicator 116 Indicator Message (Status message 116 message 117 Explanation on the POWER indicator and standby state 118 Common Problems & Solutions 120 If there is no picture, or the picture
  • NEC NP-ME382U | User Manual - English - Page 12
    7N080242) (EU: 7N080028) Computer cable (VGA) (7N520089) • Important Infomation (7N8N9391) • Quick Setup Guide(UG) (7N8N9381) Quick Setup Guide(G2) (7N8N9431) NEC Projector CD-ROM User's manual (PDF) (7N952821) Strap × 1 (24J41711) For North America only Limited warranty For customers in Europe
  • NEC NP-ME382U | User Manual - English - Page 13
    life up to 15000 hours (up to 10000 hours in ECO MODE OFF). • Two HDMI inputs support digital signals The two HDMI inputs provide HDCP compatible digital signals. The HDMI input also supports audio signal. • Integrated RJ-45 terminal for wired networking capability along with wireless networking
  • NEC NP-ME382U | User Manual - English - Page 14
    each software. URL: https://www.nec-display.com/dl/en/index.html than the projector's native resolution (ME402X/MC422X/MC372X/ MC342X/MC302X: 1024 compatibility The projector supports CRESTRON ROOMVIEW, allowing manual. This may save you time later on. At the beginning of each section of the manual
  • NEC NP-ME382U | User Manual - English - Page 15
    ❸ Part Names of the Projector Front/Top Controls (→ page 6) Focus Ring (→ page 17) Zoom Lever (→ page 17) Lens Adjustable Tilt Foot Lever (→ page 16) Lens Cap For protecting lens. Make sure to take it off during projection. 1. Introduction Lamp Cover (→ page 112) Indicators (→ page 6) Exhaust Vent
  • NEC NP-ME382U | User Manual - English - Page 16
    an anti-theft device. The security chain opening accepts security wires or chains up to 0.18 inch/4.6 mm in diameter. * This security slot supports the MicroSaver ® Security System. 1. Introduction Terminal Panel (→ page 7) Intake Vent / Filter Cover (→ page 108, 114) As the theft and dropping-off
  • NEC NP-ME382U | User Manual - English - Page 17
    Top Features 1. Introduction 2 34 5 1 6 7 8 11 9 10 1. (POWER) Button (→ page 12, 21) 2. POWER Indicator (→ page 11, 12, 21, 116) 3. STATUS Indicator (→ page 116) 4. LAMP Indicator (→ page 111, 116) 5. ECO Button (→ page 24) 6. INPUT Button (→ page 14) 7. AUTO ADJ. Button (→ page 20) 8.
  • NEC NP-ME382U | User Manual - English - Page 18
    COMPUTER OUT Terminal (Mini D-Sub 15 Pin) (→ page 90) 7. AUDIO OUT Mini Jack (Stereo Mini) (→ page 90) NOTE: The AUDIO OUT mini jack does not support earphone/ headphone terminal. 8. VIDEO IN Terminal (RCA) (→ page 91) 9. VIDEO AUDIO IN L/MONO, R (RCA) (→ page 91) 10. LAN Port (RJ-45) (→ page 94) 11
  • NEC NP-ME382U | User Manual - English - Page 19
    ❹ Part Names of the Remote Control 1. Introduction 1 1. Infrared Transmitter 3 (→ page 9) 18. FREEZE Button (→ page 23) 2 5 8 16 9 11 15 14 19 4 2. POWER ON Button 6 (→ page 12) 7 3. POWER STANDBY Button 10 (→ page 21) 13 4. SOURCE Button 17 (→ page 14) 12 5. HDMI 1 Button (→ page
  • NEC NP-ME382U | User Manual - English - Page 20
    Battery Installation 1. Press firmly and slide the battery cover off. 2. Install new batteries (AAA). Ensure that you have the batteries' polarity (+/−) aligned correctly. 1. Introduction 3. Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries
  • NEC NP-ME382U | User Manual - English - Page 21
    2. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. ❶ Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 11) Step 2 • Turning on the projector (→ page 12) Step 3 •
  • NEC NP-ME382U | User Manual - English - Page 22
    2. Projecting an Image (Basic Operation) ❷ Connecting Your Computer/Connecting the Power Cord 1. Connect your computer to the projector. This section will show you a basic connection to a computer. For information about other connections, see "6. Installation and Connections" on page 88. Connect the
  • NEC NP-ME382U | User Manual - English - Page 23
    ❸ Turning on the Projector 2. Projecting an Image (Basic Operation) 1. Remove the lens cap. Press and hold both ends of the lens cap and pull it toward you. 2. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control. The POWER indicator will blink and the
  • NEC NP-ME382U | User Manual - English - Page 24
    2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 30 menu languages. To select a menu language, follow these steps: 1. Use the or
  • NEC NP-ME382U | User Manual - English - Page 25
    2. Projecting an Image (Basic Operation) ❹ Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the INPUT button once. The projector will search for the available input
  • NEC NP-ME382U | User Manual - English - Page 26
    ] (→ page 17) Adjusting the keystone correction [KEYSTONE]* (→ page 18) Automatic Keystone Correction function is turned on at the time of shipment. To perform keystone correction manually, see "6. Correcting Keystone Distortion [KEYSTONE]" on page 18. 15
  • NEC NP-ME382U | User Manual - English - Page 27
    Adjust the Tilt Foot 1. Lift the front edge of the projector. 2. Projecting an Image (Basic Operation) CAUTION: Do not try to touch the exhaust vent during Tilt Foot adjustment as it can become heated while the projector is turned on and after it is turned off. 2. Push up and hold the Adjustable
  • NEC NP-ME382U | User Manual - English - Page 28
    2. Projecting an Image (Basic Operation) Zoom Use the ZOOM lever to adjust the image size on the screen. Zoom Lever Focus Use the FOCUS ring to obtain the best focus. Focus Ring 17
  • NEC NP-ME382U | User Manual - English - Page 29
    2. Projecting an Image (Basic Operation) ❻ Correcting Keystone Distortion [KEYSTONE] When the projector and screen are not set correctly, keystone distortion occurs. For correcting this distortion, you can use the "Keystone" function, a digital technology that can adjust for keystone-type distortion
  • NEC NP-ME382U | User Manual - English - Page 30
    2. Projecting an Image (Basic Operation) 4. Press the ▲ button to select [KEYSTONE HORIZONTAL] and then use the ◀ or ▶ so that the top and bottom sides of the projected image are parallel. • Adjust the horizontal keystone distortion. 5. Repeat steps 2 and 4 to correct keystone distortion. 6. After
  • NEC NP-ME382U | User Manual - English - Page 31
    not be displayed correctly. • If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE] manually. (→ page 58, 59) ❽ Turning Up or Down Volume Sound level from the speaker or audio output can be adjusted. Increase volume Decrease
  • NEC NP-ME382U | User Manual - English - Page 32
    2. Projecting an Image (Basic Operation) ❾ Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the STANDBY button on the remote control. The confirmation message will be displayed. 2. Secondly, press the ENTER button or press the (
  • NEC NP-ME382U | User Manual - English - Page 33
    ❿ When Moving the Projector Preparation: Make sure that the projector is turned off. 2. Projecting an Image (Basic Operation) 1. Put on the lens cap. 2. Unplug the power cord. 3. Disconnect any other cables. • Remove the USB memory or the wireless LAN Unit if it is inserted into the projector.
  • NEC NP-ME382U | User Manual - English - Page 34
    3. Convenient Features ❶ Turning off the Image and Sound Press the AV-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. The projector's power-saving function will work 10 seconds after the image is turned off. As a result, the lamp
  • NEC NP-ME382U | User Manual - English - Page 35
    2. Press the button. The area of the magnified image will be moved. 3. Convenient Features 3. Press the D-ZOOM (−) button. Each time the D-ZOOM (−) button is pressed, the image is reduced. NOTE: • The image will be magnified or demagnified at the center of the screen. • Displaying the menu will
  • NEC NP-ME382U | User Manual - English - Page 36
    3. Convenient Features NOTE: • The [ECO MODE] can be changed by using the menu. Select [SETUP] → [GENERAL] → [ECO MODE]. • The lamp life remaining and lamp hours used can be checked in [USAGE TIME]. Select [INFO.] →[USAGE TIME]. • The projector is always in [NORMAL] for 90 seconds after the lamp is
  • NEC NP-ME382U | User Manual - English - Page 37
    3. Convenient Features ❺ Using 4-Point Corner to Correct Keystone Distortion [CORNERSTONE] Use the [CORNERSTONE] and [PINCUSHION] features to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right side of the screen longer or shorter so that the projected image is
  • NEC NP-ME382U | User Manual - English - Page 38
    3. Convenient Features 5. Use the button to select one icon (▲) which points in the direction you wish to move the projected image frame. 6. Press the ENTER button. 7. Use the button to move the projected image frame as shown on the example. 8. Press the ENTER button. 9. Use the button to select
  • NEC NP-ME382U | User Manual - English - Page 39
    3. Convenient Features Pincushion By this feature, it enables to adjust left and right side or top and bottom side independently for reforming pincushion distortion. 1. Press the KEYSTONE button with no menu displayed. The KEYSTONE screen will be displayed. • Press the KEYSTONE button when using the
  • NEC NP-ME382U | User Manual - English - Page 40
    Reset the keystone and pincushion adjustment to the default value 3. Convenient Features 1. Press the KEYSTONE button with no menu displayed. On the displayed KEYSTONE menu, set the cursor at RESET using the ▼ button and press ENTER button. • Confirmation message is displayed on. 2. Move the
  • NEC NP-ME382U | User Manual - English - Page 41
    3. Convenient Features ❻ Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is
  • NEC NP-ME382U | User Manual - English - Page 42
    3. Convenient Features 7. Type in the same combination of buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] is enabled: 1. Press the POWER button
  • NEC NP-ME382U | User Manual - English - Page 43
    To disable the SECURITY function: 1. Press the MENU button. The menu will be displayed. 3. Convenient Features 2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The SECURITY KEYWORD screen
  • NEC NP-ME382U | User Manual - English - Page 44
    read in the software. It will take few minutes for starting up the USB display. USB cable (not supplied) NOTE: • A USB cable must support the USB 2.0 Specifications. • The mouse function can be used with the following operating systems: Windows 7, Windows XP, Windows Vista • Wait at least 5 seconds
  • NEC NP-ME382U | User Manual - English - Page 45
    3. Convenient Features ❽ Projecting Your Computer's Screen Image from the Projector via the USB Cable (USB Display) Using a commercially available USB cable (compatible with USB 2.0 specifications) to connect the computer with the projector allows you to send your computer screen image to the
  • NEC NP-ME382U | User Manual - English - Page 46
    5. Operate the control window. (6) (1) (2) (3) (4) (5) 3. Convenient Features (1) (Source Selects an input source of the projector. (2) (Picture Turns on or off AV-MUTE (Picture mute), and turns on or off FREEZE (Freeze a picture). (3) (Sound Turns on or off AV-MUTE (Sound mute), play the
  • NEC NP-ME382U | User Manual - English - Page 47
    3. Convenient Features 9 Projecting an Image from an Angle (Geometric Correction Tool in Image Express Utility Lite) The Geometric Correction Tool (GCT) that is a function of the pre-installed software on the projector "Image Express Utility Lite" allows you to correct distortion of images projected
  • NEC NP-ME382U | User Manual - English - Page 48
    3. Convenient Features (In the above example, Windows screens are omitted for clarification.) 4. Drag the selected [ • ] mark to the point you wish to correct and drop it. • When you click somewhere within the project image area, the nearest corner will go to the position where the mouse cursor is.
  • NEC NP-ME382U | User Manual - English - Page 49
    USB memory inserted into the projector is not recognized. - Refer to the instruction manual or the help file of the Windows you are using for details on how 2000 (pixel) EXIF information (rotation/thumbnail, etc.) is not supported. png (case insensitive) Normal, interlace RGB, index color, grayscale
  • NEC NP-ME382U | User Manual - English - Page 50
    4. Using the VIEWER ❷ Projecting the pictures on a USB memory (basic operation) This section explains the basic operations of the VIEWER. This is the operating procedure when the option menu (→ page 46) of the VIEWER is in the default state when shipped from the factory. ① Start the VIEWER 1. Turn
  • NEC NP-ME382U | User Manual - English - Page 51
    6. Move the cursor to the folder or image file with the buttons and press the ENTER button. • When a folder is selected, the file list screen for the folder is displayed. • If an image file is selected, the slide screen will be displayed. 7. Move the cursor to the image file in the file list screen
  • NEC NP-ME382U | User Manual - English - Page 52
    11. Press the ▶ button to move the cursor to , then press the ENTER button. The picture will rotate clockwise by 90°. • Every time you press the ENTER button in this state, the picture rotates 90° clockwise. 12. Press the ▶ button to move the cursor to , then press the ENTER button. The control bar
  • NEC NP-ME382U | User Manual - English - Page 53
    5. Remove the USB memory from the projector. NOTE: If you remove a USB memory from the projector without executing [REMOVE USB DEVICE] in the menu, the operation of the projector may become unstable. In that case, turn off the power of the projector once and unplug the power cord from the outlet.
  • NEC NP-ME382U | User Manual - English - Page 54
    3 Slide screen operations The following operations can be performed on the slide screen. 4. Using the VIEWER Button name ▶, PAGE ▽ ◀, PAGE △ ENTER EXIT MENU Description Project the next picture. Project the previous picture. Display the pointer (→). The pointer moves when you press the button.
  • NEC NP-ME382U | User Manual - English - Page 55
    4 File list screen operations How to view the file list screen ②① ③ 4. Using the VIEWER ④ ⑤ ① Path Display name ② To the upper level ③ Picture or folder (icon display or) thumbnail display ④ File name of the selected picture ⑤ Information display Description Display the path of the
  • NEC NP-ME382U | User Manual - English - Page 56
    4. Using the VIEWER File list screen operations Button name ENTER EXIT MENU PAGE ▽ PAGE △ Description Move the cursor. • If the cursor is on a picture, the display switches to the slide screen. • If the cursor is on a folder, the files in the folder are displayed. • If the cursor is on [UP
  • NEC NP-ME382U | User Manual - English - Page 57
    of picture files displayed in the file list screen. • OFF: Display as icons. • ON: Display as thumbnails. Example When shipped from the factory MANUAL 5 SECONDS OFF THUMBNAILS OFF SORT Set the sort order when the file list is displayed. • N AME (ABC ..)/NAME (ZYX ..): Display in the order
  • NEC NP-ME382U | User Manual - English - Page 58
    can be displayed with the VIEWER Below the panel resolution of the projector ME382U/ME342U: WUXGA (1920 × 1200) ME372W/MC382W/MC332W: WXGA (1280 × 800) ME402X/MC422X/MC372X/MC342X/MC302X: XGA (1024 × 768) 1 megabyte or less 1. Display the file list screen. 2. Move the cursor to the picture to set
  • NEC NP-ME382U | User Manual - English - Page 59
    4. Using the VIEWER ③ Set a password so that the logo will not be changed without authorization This section explains the procedure for setting the password for the first time. 1. Move the cursor to [LOGO PASSWORD] in the sub-menu and press the ENTER button. • The PASSWORD SETTING screen is
  • NEC NP-ME382U | User Manual - English - Page 60
    5. Using On-Screen Menu ❶ Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT in the bottom show
  • NEC NP-ME382U | User Manual - English - Page 61
    ❷ Menu Elements Tab Available buttons Source Highlight 5. Using On-Screen Menu Slide bar Solid triangle Radio button Wireless symbol ECO mode symbol High Altitude symbol Thermometer symbol Off Timer remaining time Key Lock symbol Menu windows or dialog boxes typically have the following elements
  • NEC NP-ME382U | User Manual - English - Page 62
    5. Using On-Screen Menu ❸ List of Menu Items Some menu items are not available depending on the input source. Menu Item INPUT ADJUST SETUP HDMI1 HDMI2 COMPUTER VIDEO USB-A LAN USB-B PICTURE IMAGE OPTIONS AUDIO GENERAL PRESET DETAIL SETTINGS CONTRAST BRIGHTNESS SHARPNESS COLOR HUE RESET CLOCK
  • NEC NP-ME382U | User Manual - English - Page 63
    ON OFF, ON ON OFF, ON OFF OFF, ON AUTO 45 SEC MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC BLUE BLUE, BLACK The asterisk (*) indicates that the default setting varies depending on the signal. *1 This feature is not supported by ME372W/MC382W/MC332W/ME402X/MC422X/MC372X/MC342X/MC302X. 52
  • NEC NP-ME382U | User Manual - English - Page 64
    Menu Item INFO. RESET LAMP LIFE REMAINING LAMP HOURS USED USAGE TIME FILTER HOURS USED TOTAL CARBON SAVINGS TOTAL COST SAVINGS SOURCE NAME SOURCE INDEX SOURCE(1) HORIZONTAL FREQUENCY VERTICAL FREQUENCY SOURCE(2) SYNC TYPE SYNC POLARITY SCAN TYPE SIGNAL TYPE VIDEO TYPE BIT DEPTH VIDEO
  • NEC NP-ME382U | User Manual - English - Page 65
    5. Using On-Screen Menu ❹ Menu Descriptions & Functions [INPUT] HDMI1 and HDMI2 Selects the HDMI compatible equipment connected to your HDMI1 or 2 IN terminal. COMPUTER Selects the computer connected to your COMPUTER input terminal signal. NOTE: When the component input signal is connected to the
  • NEC NP-ME382U | User Manual - English - Page 66
    5. Using On-Screen Menu ❺ Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are seven factory presets optimized for various types of images. You can
  • NEC NP-ME382U | User Manual - English - Page 67
    5. Using On-Screen Menu [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 7]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE]. HIGH-BRIGHT Recommended for
  • NEC NP-ME382U | User Manual - English - Page 68
    Enhancing the Color [COLOR ENHANCEMENT] This function allows you to enhance the color of image. 5. Using On-Screen Menu NOTE: This function is available only when [PRESENTATION] is selected [REFERENCE]. Adjusting White Balance [WHITE BALANCE] This allows you to adjust the white balance. Contrast
  • NEC NP-ME382U | User Manual - English - Page 69
    [IMAGE OPTIONS] 5. Using On-Screen Menu Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function
  • NEC NP-ME382U | User Manual - English - Page 70
    Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. 5. Using On-Screen Menu - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and
  • NEC NP-ME382U | User Manual - English - Page 71
    . • This table shows typical resolutions and aspect ratios that most computers support. Resolution VGA 640 × 480 SVGA 800 × 600 XGA 1024 × When the incoming signal with the resolution of 800 × 600 is displayed on the ME402X/ MC422X/MC372X/MC342X/ MC302X: NOTE: • When a non-computer signal is
  • NEC NP-ME382U | User Manual - English - Page 72
    5. Using On-Screen Menu Sample image when the appropriate aspect ratio is automatically determined ME402X/MC422X/MC372X/MC342X/MC302X [Computer signal] Aspect ratio of incoming signal 4:3 5:4 16:9 15:9 16:10 Sample image when the appropriate aspect ratio is automatically determined [
  • NEC NP-ME382U | User Manual - English - Page 73
    [AUDIO] 5. Using On-Screen Menu Turning Up or Down Sound Adjusts the volume of the projector speaker and AUDIO OUT (Stereo Mini Jack). TIP: • When no menus appear, the ◀ and ▶ buttons on the projector cabinet and the VOL. +/− buttons on the remote control work as a volume control. (→ page 20) 62
  • NEC NP-ME382U | User Manual - English - Page 74
    to detect its tilt and correct vertical distortion automatically. To turn on the AUTO KEYSTONE feature, select [ON]. To adjust the KEYSTONE feature manually, select [OFF]. NOTE: • The [AUTO KEYSTONE] function is not available when an orientation type such as [CEILING REAR], [DESKTOP REAR], [CEILING
  • NEC NP-ME382U | User Manual - English - Page 75
    Using the Wall Color Correction [WALL COLOR] 5. Using On-Screen Menu This function allows for quick adaptive color correction in applications where the screen material is not white. NOTE: Selecting [WHITEBOARD] reduces lamp brightness. Setting Eco Mode [ECO MODE] The ECO MODE increases lamp life,
  • NEC NP-ME382U | User Manual - English - Page 76
    for the administrator mode. Up to 10 alphanumeric characters Selecting Menu Language [LANGUAGE] You can choose one of 30 languages for on-screen instructions. NOTE: Your setting will not be affected even when [RESET] is done from the menu. [MENU] Selecting Menu Color [COLOR SELECT] You can
  • NEC NP-ME382U | User Manual - English - Page 77
    option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the factory preset. Selecting a Color or Logo for Background [BACKGROUND] Use
  • NEC NP-ME382U | User Manual - English - Page 78
    [INSTALLATION] 5. Using On-Screen Menu Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. DESKTOP FRONT CEILING REAR
  • NEC NP-ME382U | User Manual - English - Page 79
    the CONTROL ID setting. NOTE: • When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support the CONTROL ID function. (In this case, the buttons on the projector cabinet can be used.) • Your setting will not be affected even when [RESET
  • NEC NP-ME382U | User Manual - English - Page 80
    5. Using On-Screen Menu Using Test Pattern [TEST PATTERN] Displays the test pattern to check for image distortion at the time of the projector setup. Press the ENTER button to display the test pattern; press the EXIT button to close the test pattern and return to the menu. Menu operation and
  • NEC NP-ME382U | User Manual - English - Page 81
    / MC422X/MC372X/MC342X/MC302X. In this case, select [OFF]. NOTE: • [OFF] is selected at the time of shipment of ME402X/MC422X/MC372X/MC342X/MC302X. • [ON] is selected at the time of shipment of ME382U/ME342U/ME372W/MC382W/MC332W. Enabling the deinterlace [DEINTERLACE] Turns on or
  • NEC NP-ME382U | User Manual - English - Page 82
    indicator turns on in Green. When [STANDBY MODE] → [NETWORK STANDBY] is selected - When [NETWORK SERVICE] → [AMX SETTINGS] → [ENABLE] is selected - When [NETWORK SERVICE] → [CRESTRON SETTINGS] → [CRESTRON CONTROL] → [ENABLE] is selected - W hen [NETWORK SETTINGS] → [WIRELESS LAN] → Except for
  • NEC NP-ME382U | User Manual - English - Page 83
    5. Using On-Screen Menu Enabling Direct Power On [DIRECT POWER ON] Turns the projector on automatically when the power cord is inserted into an active power outlet. This eliminates the need to always use the POWER button on the remote control or projector cabinet. Turning On the Projector By
  • NEC NP-ME382U | User Manual - English - Page 84
    can be adjusted in units of ± 1 pixel in the horizontal direction for HORIZONTAL R, G and B, in the vertical direction for VERTICAL R, G and B. • This feature is not supported by ME372W/MC382W/MC332W/ME402X/MC422X/MC372X/MC342X/MC302X. 73
  • NEC NP-ME382U | User Manual - English - Page 85
    5. Using On-Screen Menu ❼ Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage. This item has seven pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LAMP LIFE
  • NEC NP-ME382U | User Manual - English - Page 86
    [SOURCE(1)] 5. Using On-Screen Menu [SOURCE NAME] [HORIZONTAL FREQUENCY] [SYNC TYPE] [SCAN TYPE] [SOURCE(2)] [SOURCE INDEX] [VERTICAL FREQUENCY] [SYNC POLARITY] [SIGNAL TYPE] [BIT DEPTH] [WIRED LAN] [VIDEO TYPE] [VIDEO LEVEL] [IP ADDRESS] [GATEWAY] [SUBNET MASK] [MAC ADDRESS] 75
  • NEC NP-ME382U | User Manual - English - Page 87
    [WIRELESS LAN] 5. Using On-Screen Menu [IP ADDRESS] [GATEWAY] [SSID] [SECURITY] [SIGNAL LEVEL] [VERSION] [SUBNET MASK] [MAC ADDRESS] [NETWORK TYPE] [CHANNEL] [FIRMWARE] Version [DATA] Version [OTHERS] [PROJECTOR NAME] [HOST NAME] [MODEL NO.] [SERIAL NUMBER] [LAN UNIT TYPE] [CONTROL ID] (when [
  • NEC NP-ME382U | User Manual - English - Page 88
    5. Using On-Screen Menu ❽ Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to
  • NEC NP-ME382U | User Manual - English - Page 89
    6. Installation and Connections ❶ Setting Up the Screen and the Projector Use this to get a general idea of what the screen size will be when set in a certain position, what size screen you will need, and what distance you will need to project images of the desired size. The projection distance
  • NEC NP-ME382U | User Manual - English - Page 90
    and Connections The projection distance range at which focusing is possible is 0.8 m (for 30 inches) to 13.8 m (for 300 inches). Install within this range. [ME402X] Screen size (inch) 300 240 When zoom lever turned to wide When zoom lever turned to telescopic 200 180 150 120 100 80 60 40
  • NEC NP-ME382U | User Manual - English - Page 91
    6. Installation and Connections The projection distance range at which focusing is possible is 0.9 m (for 30 inches) to 10.9 m (for 300 inches). Install within this range. [MC342X/MC302X] Screen size (inch) 300 240 When zoom lever turned to wide When zoom lever turned to telescopic 200 180 150
  • NEC NP-ME382U | User Manual - English - Page 92
    6. Installation and Connections The projection distance range at which focusing is possible is 0.8 m (for 30 inches) to 13.4 m (for 300 inches). Install within this range. [ME372W] Screen size (inch) 300 240 When zoom lever turned to wide When zoom lever turned to telescopic 200 180 150 120
  • NEC NP-ME382U | User Manual - English - Page 93
    6. Installation and Connections The projection distance range at which focusing is possible is 0.9 m (for 30 inches) to 10.7 m (for 300 inches). Install within this range. [MC382W] Screen size (inch) 300 240 When zoom lever turned to wide When zoom lever turned to telescopic 200 180 150 120
  • NEC NP-ME382U | User Manual - English - Page 94
    6. Installation and Connections The projection distance range at which focusing is possible is 1.0 m (for 30 inches) to 11.6 m (for 300 inches). Install within this range. [MC332W] Screen size (inch) 300 240 When zoom lever turned to wide When zoom lever turned to telescopic 200 180 150 120
  • NEC NP-ME382U | User Manual - English - Page 95
    6. Installation and Connections The projection distance range at which focusing is possible is 0.8 m (for 30 inches) to 12.9 m (for 300 inches). Install within this range. [ME382U/ME342U] Screen size (inch) 300 240 When zoom lever turned to wide When zoom lever turned to telescopic 200 180 150
  • NEC NP-ME382U | User Manual - English - Page 96
    3658 51 1307 287 7287 - 270 6858 216 5486 162 4115 58 1470 323 8199 - 300 7620 240 6096 180 4572 64 1634 359 9112 - [ME402X] Diagonal Screen Size Width Height B C Wide inch mm inch mm inch mm inch mm inch mm - 30 762 24 610 18 457 6 157 31 778
  • NEC NP-ME382U | User Manual - English - Page 97
    [ME372W] Diagonal Screen Size Width Height B C Wide inch mm inch mm inch mm inch mm inch mm - 30 762 25 646 16 404 6 154 30 755 - 40 1016 34 862 21 538 8 206 40 1025 - 60 1524 51 1292 32 808 12 309 62 1565 - 80 2032 68 1723 42 1077 16 411 83 2105 - 100 2540 85 2154 53 1346 20 514
  • NEC NP-ME382U | User Manual - English - Page 98
    6. Installation and Connections WARNING • Installing your projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information. • Do not attempt to install the projector yourself. • Only use your projector on a solid, level surface. If the projector falls to
  • NEC NP-ME382U | User Manual - English - Page 99
    to connect to a computer. The connection cable is not enclosed with the projector. Please get ready a suitable cable for the connection. NOTE: Signals supported by Plug & Play (DDC2) COMPUTER IN analog Yes INPUT HDMI 1 IN digital Yes HDMI 2 IN digital Yes HDMI 1 IN HDMI cable (not supplied
  • NEC NP-ME382U | User Manual - English - Page 100
    the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle happen, restart your PC. • The COMPUTER video input terminals support Windows Plug and Play. • A Mac signal adapter (commercially available)
  • NEC NP-ME382U | User Manual - English - Page 101
    to your projector to simultaneously view on a monitor the computer analog image you're projecting. NOTE: • The AUDIO OUT mini jack does not support earphone/headphone terminal. • When audio equipment is connected, the projector speaker is disabled. • The signal output from the COMPUTER OUT of this
  • NEC NP-ME382U | User Manual - English - Page 102
    Input terminal VIDEO IN INPUT button on the projector cabinet VIDEO Button on the remote control (VIDEO) NOTE: Refer to your VCR owner's manual for more information about your equipment's video output requirements. NOTE: An image may not be displayed correctly when a Video source is played back
  • NEC NP-ME382U | User Manual - English - Page 103
    projector. Input terminal COMPUTER IN INPUT button on the projector cabinet COMPUTER Button on the remote control (COMPUTER) NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements. 92
  • NEC NP-ME382U | User Manual - English - Page 104
    6. Installation and Connections Connecting HDMI Input You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the HDMI IN terminal of your projector. HDMI 1 IN HDMI 2 IN HDMI cable (not supplied) Use High Speed HDMI® Cable. Audio cable (not
  • NEC NP-ME382U | User Manual - English - Page 105
    6. Installation and Connections Connecting to a Wired LAN The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable. To use a LAN connection, you are required to set the LAN on the projector menu. (→ page 99) Example of LAN connection (1) Server Hub LAN
  • NEC NP-ME382U | User Manual - English - Page 106
    6. Installation and Connections Connecting to a Wireless LAN (Optional: NP05LM series) The USB Wireless LAN Unit also provides a wireless LAN connection. To use a wireless LAN connection, you are required to assign an IP address to the projector. Important: • If you use the projector with the USB
  • NEC NP-ME382U | User Manual - English - Page 107
    company's website for more details about MultiPresenter. https://www.nec-display.com/dl/en/soft/multipresenter/index.html AB Simultaneous display projector or configure the NETWORK SETTINGS. • By configuring the network service settings of the projector, AMX BEACON, HTTP server logon password, PJLink
  • NEC NP-ME382U | User Manual - English - Page 108
    • Configure the NETWORK SETTINGS of the projector. (→ page 99) • Install the MultiPresenter app in the computer or tablet terminal. https://www.nec-display.com/dl/en/soft/multipresenter/index.html The procedure is described here for each wireless LAN profile "INTELLIGENT CONNECTION", "INFRASTRUCTURE
  • NEC NP-ME382U | User Manual - English - Page 109
    7. Connecting to a Network ② When connecting with INFRASTRUCTURE 1. Turn on the power of the projector and press the APPS button on the remote control. The start-up screen of MultiPresenter is displayed. 2. Connect the projector and your computer or tablet terminal to the same network. NOTE: • Check
  • NEC NP-ME382U | User Manual - English - Page 110
    3 NETWORK SETTINGS 7. Connecting to a Network Move the cursor to [ NETWORK SETTINGS] at the bottom right of the start-up screen and press the ENTER button to display the [NETWORK SETTINGS] screen. ① ② ③ ④ ⑤ ⑥ ① INFORMATION Displays information regarding the wired LAN and wireless LAN of
  • NEC NP-ME382U | User Manual - English - Page 111
    7. Connecting to a Network ④ WIRELESS LAN Configure the wireless LAN settings. Item name PROFILE Description There are 4 wireless LAN profiles as shown below. • DISABLE (initial value) • INTELLIGENT CONNECTION • SIMPLE ACCESS POINT • INFRASTRUCTURE If you are not using a wireless LAN, set the
  • NEC NP-ME382U | User Manual - English - Page 112
    7. Connecting to a Network SIMPLE ACCESS POINT Turn the projector into the [SIMPLE ACCESS POINT] to connect computers or tablet terminals installed with MultiPresenter to the projector. Item name PROFILE MODE CHANNEL SSID SECURITY TYPE SECURITY KEY Description SIMPLE ACCESS POINT Select the
  • NEC NP-ME382U | User Manual - English - Page 113
    LIMIT mission. • Initial value: DISABLE START-UP SCREEN GET APPS GUIDE Select whether or not to display the Get MultiPresenter display on the start MultiPresenter is connected. • Initial value: ON (display) ⑥ NETWORK SERVICE Configure the AMX BEACON, HTTP SERVER, PJLink, ALERT MAIL, CRESTRON
  • NEC NP-ME382U | User Manual - English - Page 114
    Item name PJLink ALERT MAIL CRESTRON 7. Connecting to a Network Description Set the PJLink password. PASSWORD Set the PJLink password. SETTINGS • Initial value: Blank • Allowable characters: alphanumeric characters • Number of characters: 0-32 characters When a password is set, a number
  • NEC NP-ME382U | User Manual - English - Page 115
    7. Connecting to a Network 4 Controlling the Projector by Using an HTTP Browser Overview The HTTP Server function provides settings and operations for: • Setting for wired/wireless network (NETWORK SETTINGS) To use wireless LAN connection, the optional USB Wireless LAN Unit is required. (→ page 95)
  • NEC NP-ME382U | User Manual - English - Page 116
    of the computer being used. Example 1: When the host name of the projector has been set to "pj.nec.co.jp", access is gained to the network setting by specifying http://pj.nec.co.jp/index.html for the address or the entry column of the URL. Example 2: When the IP address
  • NEC NP-ME382U | User Manual - English - Page 117
    7. Connecting to a Network PICTURE: Controls the video adjustment of the projector. CONTRAST Increases the contrast adjustment value. CONTRAST Decreases the contrast adjustment value. BRIGHTNESS Increases the brightness adjustment value. BRIGHTNESS Decreases the brightness adjustment value.
  • NEC NP-ME382U | User Manual - English - Page 118
    7. Connecting to a Network NETWORK SETTINGS For details on each of the [NETWORK SETTINGS], see "7-3. NETWORK SETTINGS" (→ page 99). 107
  • NEC NP-ME382U | User Manual - English - Page 119
    8. Maintenance This section describes the simple maintenance procedures you should follow to clean the filter, the lens, the cabinet, and to replace the lamp and the filter. ❶ Cleaning the Filter The air-filter sponge keeps dust and dirt from getting inside the projector and should be frequently
  • NEC NP-ME382U | User Manual - English - Page 120
    4. Attach the filter to the filter cover. 8. Maintenance 5. Put the filter unit back to the projector cabinet. Insert two catches of the tip of the filter unit into the groove of the cabinet, and push the button to close the filter unit. • Push the filter unit until it clicks into place. 6. Clear
  • NEC NP-ME382U | User Manual - English - Page 121
    8. Maintenance ❷ Cleaning the Lens • Turn off the projector before cleaning. • The projector has a plastic lens. Use a commercially available plastic lens cleaner. • Do not scratch or mar the lens surface as a plastic lens is easily scratched. • Never use alcohol or glass lens cleaner as doing so
  • NEC NP-ME382U | User Manual - English - Page 122
    glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your NEC dealer for lamp replacement. *NOTE: This message will be displayed under the following conditions: • for one minute after the projector has been powered on • when
  • NEC NP-ME382U | User Manual - English - Page 123
    To replace the lamp: 1. Remove the lamp cover. (1) Loosen the lamp cover screw. • The lamp cover screw is not removable. (2) Push and slide the lamp cover off. 8. Maintenance 2. Remove the lamp housing. (1) Loosen the three screws securing the lamp housing until the phillips screwdriver goes into
  • NEC NP-ME382U | User Manual - English - Page 124
    3. Install a new lamp housing. (1) Insert a new lamp housing until the lamp housing is plugged into the socket. (2) Push the top center of the lamp housing to secure it. (3) Secure it in place with the three screws. • Be sure to tighten the screws. 8. Maintenance 4. Reattach the lamp cover. (1)
  • NEC NP-ME382U | User Manual - English - Page 125
    8. Maintenance To replace the filter: NOTE: • Before replacing the filter, wipe off dust and dirt from the projector cabinet. • The projector is precision equipment. Keep out dust and dirt during filter replacement. • Do not wash the filter with soap and water. Soap and water will damage the filter
  • NEC NP-ME382U | User Manual - English - Page 126
    5. Put the filter unit back to the projector cabinet. Insert two catches of the tip of the filter unit into the groove of the cabinet, and push the button to close the filter unit. • Push the filter unit until it clicks into place. 8. Maintenance This completes the filter replacement. Go on to the
  • NEC NP-ME382U | User Manual - English - Page 127
    9. Appendix ❶ Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Feature of each indicator ① ②③ ① POWER indicator This indicator informs the power status of the projector. ②
  • NEC NP-ME382U | User Manual - English - Page 128
    Off Off Green (Light) Red (Light) Status varies Lamp does not light. Red (Light) Lamp cover problem Green (Light) Error requiring service support Status varies Procedure The projector's keys are locked. The setting must be canceled to operate the projector. (→ page 67) Check the control
  • NEC NP-ME382U | User Manual - English - Page 129
    Explanation on the POWER indicator and standby state 9. Appendix In the state the selected STANBY MODE is NETWORK STANDBY. Available ports in each state (○: Available, ×: Unavailable) LAN PC CONTROL Indicator : Lights in blue Powered On state Power Off Power On Power consumption High ○ ○
  • NEC NP-ME382U | User Manual - English - Page 130
    In the state the selected STANBY MODE is NORMAL. Indicator : Lights in blue Powered ON state Power Off 9. Appendix Power consumption Available ports in each state (○: Available, ×: Unavailable) LAN PC CONTROL High ○ ○ Power On Indicator : Lights in green Sleep state No operation/No signal
  • NEC NP-ME382U | User Manual - English - Page 131
    (→ "Power/Status/Lamp Indicator" on page 116.) Problem Check These Items Does not turn on or shut Make sure that the resolution you are trying to display is supported by the projector. (→ page 127) • Adjust the computer image manually with the Horizontal/Vertical in the [IMAGE OPTIONS]. (→ page
  • NEC NP-ME382U | User Manual - English - Page 132
    display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use For setting display modes other than those supported by your Mac and the projector, changing mirroring" is off on your MacBook. Refer to owner's manual supplied with your Mac computer for mirroring. • Folders or
  • NEC NP-ME382U | User Manual - English - Page 133
    23.0 mm 29.0 mm 23.0 mm 23.0 mm 29.0 mm 23.0 mm Zoom Manual Focus Manual Lamp ECO 225 W 210 W 225 W MODE OFF NORMAL 180 W ECO 151 W Light ME372W MC332W MC422X ME402X MC372X MC342X MC302X 1 × RGB/Component (D-SUB 15 P), 2 × HDMI Type A (19P, HDMI® Terminal) HDCP supported*4, 1 × Video
  • NEC NP-ME382U | User Manual - English - Page 134
    *5 An image with higher or lower resolution than the projector's native resolution (ME402X/MC422X/MC372X/MC342X/MC302X: 1024 × 768 / ME372W/MC382W/MC332W: 1280 × 800 necdisplay.com/ Europe : https://www.nec-display-solutions.com/ Global : https://www.nec-display.com/global/index.html For
  • NEC NP-ME382U | User Manual - English - Page 135
    ❸ Cabinet Dimensions Unit: mm (inch) [ME382U/ME342U] 9. Appendix 284.5 (11.2) 261 (10.3) 54 (2.1) 95 (3.7) 345 (13.6) 175 (6.9) 104.6 (4.1) 113.5 (4.5) 126.2 (5.0) 154 (6.1) 195 (7.7) 5 (0.2) 124
  • NEC NP-ME382U | User Manual - English - Page 136
    Unit: mm (inch) [ME372W/MC382W/MC332W/ME402X/MC422X/MC372X/MC342X/MC302X] 9. Appendix 261 (10.3) 54 (2.1) 345 (13.6) 95 (3.7) 175 (6.9) 104.6 (4.1) 108.4 (4.3) 126.2 (5.0) 154 (6.1) 195 (7.7) 5 (0.2) 125
  • NEC NP-ME382U | User Manual - English - Page 137
    9. Appendix ❹ Pin Assignments of D-Sub COMPUTER Input Terminal Mini D-Sub 15 Pin Terminal 11 12 13 14 15 6 7 8 9 10 1 23 45 Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RGB Signal (Analog) Red Green or Sync on Green Blue Ground
  • NEC NP-ME382U | User Manual - English - Page 138
    50/60 50/60 60 50 60 50 *1 Native resolution on XGA model (ME402X/MC422X/MC372X/ MC342X/MC302X) *2 Native resolution on WXGA model (ME372W/MC382W/MC332W Advanced AccuBlend. • Sync on Green and Composite sync signals are not supported. • Signals other than those specified in the table above may not
  • NEC NP-ME382U | User Manual - English - Page 139
    ❻ PC Control Codes and Cable Connection PC Control Codes Function POWER ON POWER OFF INPUT SELECT COMPUTER INPUT SELECT HDMI1 INPUT SELECT HDMI2 INPUT SELECT VIDEO INPUT SELECT USB-A INPUT SELECT LAN INPUT SELECT USB-B PICTURE MUTE ON PICTURE MUTE OFF SOUND MUTE ON SOUND MUTE OFF Code Data 02H 00H
  • NEC NP-ME382U | User Manual - English - Page 140
    device supports the common ASCII Control Command for controlling our projector and monitor. Please visit our web site for detailed information about the command. https://www.nec-display error:system Error Status Temperature error Fan trouble Light source trouble Lens trouble System trouble 129
  • NEC NP-ME382U | User Manual - English - Page 141
    remote control operation on your PC. Virtual Remote screen For getting the Virtual Remote Tool, please visit our web site and download it: https://www.nec-display.com/dl/en/index.html Toolbar 130
  • NEC NP-ME382U | User Manual - English - Page 142
    , ME402X/MC422X/MC372X/MC342X/ MC302X: /Logo/necpj_bb_x.bmp) inclulded on the supplied NEC Projector CD-ROM. TIP: • Virtual Remote Tool can be used with a LAN and a serial connection. USB connection is not supported by Virtual Remote Tool. • The projector's COMPUTER IN terminal supports
  • NEC NP-ME382U | User Manual - English - Page 143
    service personnel, check the following list to be sure repairs are needed also by referring to the "Troubleshooting" section in your user's manual. This checklist below will help us solve your problem . □ Input source's resolution and frequency are supported by the projector. □ Image is too dark
  • NEC NP-ME382U | User Manual - English - Page 144
    In the space below please describe your problem in detail. 9. Appendix Information on application and in □ Blue □ Green □ Orange □ Red Remote control model number: Signal cable NEC standard or other manufacturer's cable? Model number: Length: inch/m Distribution amplifier Model number:
  • NEC NP-ME382U | User Manual - English - Page 145
    .com, click on support center/register product and submit your completed form online. Upon receipt, we will send a confirmation letter with all the details you will need to take advantage of fast, reliable warranty and service programs from the industry leader, NEC Display Solutions of America
  • NEC NP-ME382U | User Manual - English - Page 146
    © NEC Display Solutions, Ltd. 2018 7N952821
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
Projector
ME382U/ME342U/ME372W/MC382W/
MC332W/ME402X/MC422X/MC372X/
MC342X/MC302X
User’s Manual
Please visit our web site for User’s Manual in the latest version:
• The ME342U, MC332W, MC422X, MC342X and MC302X are not distributed in North America.
Model No.
NP-ME382U/NP-ME342U/NP-ME372W/NP-MC382W/NP-MC332W/NP-ME402X/NP-MC422X/NP-MC372X/
NP-MC342X/NP-MC302X