NEC NP-P474W NP216 : NP01UCM (ceiling mount) instructions
NEC NP-P474W Manual
 |
View all NEC NP-P474W manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC NP-P474W manual content summary:
- NEC NP-P474W | NP216 : NP01UCM (ceiling mount) instructions - Page 1
instruction sheet before you start installation and assembly. WARNING • Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. IMPORTANT! Be sure not to touch the projector ...page 6 Visit the NEC Web Site at www.necsam - NEC NP-P474W | NP216 : NP01UCM (ceiling mount) instructions - Page 2
Compatability Chart for NEC Projectors Manufacturer NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC Model HT410 HT510 GT1150 GT2150 GT5000 GT6000 GT6000R GT2000 GT2000R GT950 - NEC NP-P474W | NP216 : NP01UCM (ceiling mount) instructions - Page 3
510-2004 510-2060 510-2063 510-2066 560-1097 540-2025 JE L D H RK F Note: Actual parts may appear slightly different than illustrated. Visit the NEC Web Site at www.necsam.com 3 of 9 Q B FASTENERS ISSUED: 04-11-06 SHEET #: 055-9458-2 05-09-06 For customer care call 1-800-729-0307 - NEC NP-P474W | NP216 : NP01UCM (ceiling mount) instructions - Page 4
CAUTION L Generic Screw • It is the responsibility of the installer to ensure that the projector is properly ventilated. Feet of channels are used to raise the mount off the projector surface. Foot of Channel Visit the NEC Web Site at www.necsam.com 4 of 9 ISSUED: 04-11-06 SHEET #: 055-9458 - NEC NP-P474W | NP216 : NP01UCM (ceiling mount) instructions - Page 5
surface will safely support the combined load of all attached hardware and components. IMPORTANT: Be sure to drill holes into the joist CENTER! WOOD JOIST CEILING For optional Cord Management, install two spacers (H) between ceiling plate (G) and ceiling. H H G F F Visit the NEC Web Site at - NEC NP-P474W | NP216 : NP01UCM (ceiling mount) instructions - Page 6
not hold concrete anchor. • Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard bracket concrete metal bracket concrete plaster/ dry wall plaster/ dry wall Visit the NEC Web Site at www.necsam.com 6 of 9 ISSUED: 04-11-06 SHEET - NEC NP-P474W | NP216 : NP01UCM (ceiling mount) instructions - Page 7
overtighten screw; overtightening screw will damage threads making it difficult to separate the products. Skip to step 3. WOOD CEILING G A C A K NOTCH G DETAIL 1 Visit the NEC Web Site at www.necsam.com 7 of 9 ISSUED: 04-11-06 SHEET #: 055-9458-2 05-09-06 For customer care call 1-800-729-0307 - NEC NP-P474W | NP216 : NP01UCM (ceiling mount) instructions - Page 8
Listed EXT or ADJ Series) Sold Separately SLOT K G EXTENSION COLUMN DETAIL 4 I SLOT EXTENSION COLUMN K I SLOT J DETAIL 5 EXTENSION I COLUMN SLOT K A J DETAIL 6 Visit the NEC Web Site at www.necsam.com 8 of 9 ISSUED: 04-11-06 SHEET #: 055-9458-1 For customer care call 1-800-729-0307 or - NEC NP-P474W | NP216 : NP01UCM (ceiling mount) instructions - Page 9
WARNING • Do not lift more weight than you can handle! Use additional man power or mechanical lifting equipment to safely handle placement of the projector! Visit the NEC Web Site at www.necsam.com 9 of 9 ISSUED: 04-11-06 SHEET #: 055-9458-2 05-09-06 For customer care call 1-800-729-0307
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
ISSUED: 04-11-06
SHEET #: 055-9458-2
05-09-06
Visit the NEC Web Site at
www.necsam.com
1 of 9
For customer care call 1-800-729-0307 or 708-865-8870.
Read instruction sheet before you start installation and assembly.
Maximum Load Capacity: 50 lb (22.7 kg)
IMPORTANT! Be sure not to touch the projector while tightening the set screw on the
ball and socket mount. This may cause the image to be unaligned when you let go.
Applications:
Flush Mount
..................................................................................................................................................
page 7
Extension Column
........................................................................................................................................
page 8
Installations:
To Wood Joist Finished Ceilings,
Exposed Wood Joists, or Wood Beam Ceilings
........................................................................................
page 5
To Concrete Ceilings
....................................................................................................................................
page 6
IMPORTANT!
Turn to the appropriate page for your ceiling installation.
•
Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and
components.
WARNING
Model:
NP01UCM
Installation and Assembly - Universal Ceiling Mount