NEC NP-P547UL User Manual English

NEC NP-P547UL Manual

Get NEC NP-P547UL PDF manuals and user guides View all NEC NP-P547UL manuals
Add to My Manuals
Save this manual to your list of manuals

NEC NP-P547UL manual content summary:

  • NEC NP-P547UL | User Manual English - Page 1
    Projector P627UL/P547UL User's Manual Model No. NP-P627UL/NP-P547UL
  • NEC NP-P547UL | User Manual English - Page 2
    Table of Contents Introduction ... iii Important Information ... iv 1. Check the product overview, supplied items and part names 1 1-1. Introduction to the Projector ...1 1-2. What's in the Box? ...4 1-3. Part Names of the Projector ...5 1-4. Part Names of the Remote Control 10 2. Projecting an
  • NEC NP-P547UL | User Manual English - Page 3
    9-4. Cabinet Dimensions ...134 9-5. Pin assignments and signal names of main terminals 135 9-6. PC Control Codes and Cable Connection 137 9-7. About the ASCII Control Command 139 9-8. Troubleshooting ...141 9-9. Indicator Message ...144 9-10. Setting the date and time in the projector 148 9-11
  • NEC NP-P547UL | User Manual English - Page 4
    Thank you for purchasing the NEC projector. This projector can be connected to computers, video devices, etc. to project images sharply onto a screen. Please read this manual carefully before using your projector and keep the manual handy for future reference. Read this user's manual if you have any
  • NEC NP-P547UL | User Manual English - Page 5
    as well as damage to property. The symbols and their meanings are described below. Be sure to understand them thoroughly before reading this manual. WARNING Failing to heed this symbol and handling the product erroneously could result in accidents leading to death or major injury. CAUTION Failing
  • NEC NP-P547UL | User Manual English - Page 6
    with this projector. If the supplied power cord does not satisfy requirements of your country's safety standard, and voltage and current for your objects on the cord. - Do not place the cord under the projector. - Do not cover the cord with a rug, etc. - Do not scratch or modify the cord. - Do
  • NEC NP-P547UL | User Manual English - Page 7
    projector, check that the power supply to which the projector is to be connected meets these requirements. • Use a power outlet as the projector's power supply. Do not connect the projector or burns. Have qualified service personnel perform inspection, adjustments and repairs of the interior. vi
  • NEC NP-P547UL | User Manual English - Page 8
    install the projector yourself in such cases. The projector could drop and cause injury. Suspending the projector from the ceiling requires sufficient ceiling strength to support the projector, and the building standards laws in your particular country must be followed. It is also necessary to take
  • NEC NP-P547UL | User Manual English - Page 9
    or dangers that, could lead directly to death, personal injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system. viii
  • NEC NP-P547UL | User Manual English - Page 10
    NOT TOUCH WITH WET HANDS UNPLUG THE POWER CORD PROHIBITED REQUIRED Connecting the power cord to earth • This equipment is designed to be used in the condition of the power cord connected to earth. If the
  • NEC NP-P547UL | User Manual English - Page 11
    Important Information PROHIBITED PROHIBITED CAUTION FOR HIGH TEMPERATURE PROHIBITED REQUIRED REQUIRED Handling batteries • Handle batteries with caution. Failure to do so could lead to fire, injury or contamination of the surroundings. - Do not short-circuit or
  • NEC NP-P547UL | User Manual English - Page 12
    Important Information Laser Safety Caution Obey the laws and regulations of your country in relation to the installation and management of the device. For China This product is classified as Class 2 of GB 7247.1-2012. WARNING CLASS 2 LASER PRODUCT OF GB 7247.1-2012 • LASER RADIATION - DO NOT STARE
  • NEC NP-P547UL | User Manual English - Page 13
    laser diodes is equipped in the product as the light source. • These laser diodes are sealed in the light module. No maintenance or service is required for the performance of the light module. • End user is not allowed to replace the light module. • Contact qualified distributor for light module
  • NEC NP-P547UL | User Manual English - Page 14
    Important Information Laser light radiation range The figure below shows the maximum radiation range of the laser light. Horizontal angle (unit: degree) Zoom Wide Tele Right most HR 33.0 21.8 Lens position Center (Reference value) HC 22.3 14.2 Left most HL 33.0 21.8 HR HC HC HL Right Left
  • NEC NP-P547UL | User Manual English - Page 15
    not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense
  • NEC NP-P547UL | User Manual English - Page 16
    Important Information (For Customers in U.K.) IMPORTANT • The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: BLUE: BROWN: "Earth" "Neutral" "Live" • As the colours of the wires in the mains lead of this apparatus may not correspond with the
  • NEC NP-P547UL | User Manual English - Page 17
    legislation as implemented in each Member State requires that used electrical and electronic products . The battery shall be separated to collect by local service. (for Germany only) Machine Noise Information Regulation - not support earphone/headphone terminal. Turkish WEEE information relevant for Turkish
  • NEC NP-P547UL | User Manual English - Page 18
    Important Information Cautions for ensuring the projector's performance • Do not install in places subject to vibrations or shocks. If installed in places where the vibrations from power sources and the like are conveyed, or in vehicles or on vessels, etc. the projector could be affected by
  • NEC NP-P547UL | User Manual English - Page 19
    Important Information • Take measures to prevent external light from shining on the screen. Make sure only the light from the projector shines on the screen. The less external light on the screen, the higher the contrast and the more beautiful the images. • About screens Images will not be clear if
  • NEC NP-P547UL | User Manual English - Page 20
    unit Wireless LAN unit is an optional item. To find the appropriate model to your area, please visit the company website: URL: https://www.sharp-nec-displays.com/global/support/index.html xix
  • NEC NP-P547UL | User Manual English - Page 21
    Trademarks • MultiPresenter and ProAssist are trademarks or registered trademarks of Sharp NEC Display Solu- tions, Ltd. in Japan and other countries. • • Other product names and company logos mentioned in this user's manual may be the trademarks or registered trademarks of their respective holders.
  • NEC NP-P547UL | User Manual English - Page 22
    • Liquid crystal type high brightness/high resolution projector Model name P627UL P547UL Brightness 6,200 lm 5,400 lm Resolution WUXGA (1920 × 1200 the laser light source can be used for a long time without requiring replacement or maintenance. • Brightness can be adjusted within a wide range
  • NEC NP-P547UL | User Manual English - Page 23
    LAN. • CRESTRON ROOMVIEW and Extron XTP compatibility The projector supports CRESTRON ROOMVIEW and Extron XTP, allowing multiple devices connected in the MultiPresenter application This projector is compatible with the NEC MultiPresenter application, so multi-screen projection is possible via
  • NEC NP-P547UL | User Manual English - Page 24
    1. Check the product overview, supplied items and part names Energy-saving • 0.13 W (100-130 V AC)/0.19 W (200-240 V AC) in standby condition with energy saving technology Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode. NORMAL: 0.13 W (100-130 V AC)/0.
  • NEC NP-P547UL | User Manual English - Page 25
    7N080022/7N080028 • Important Information (For North America: 7N8R1441) (For Other countries than North America: 7N8R1441 and 7N8R1451) • Quick Setup Guide (7N8R1471) • Security Sticker (Use this sticker when security password is set on.) For North America only • Limited warranty For customers
  • NEC NP-P547UL | User Manual English - Page 26
    1. Check the product overview, supplied items and part names 1-3. Part Names of the Projector Front 1 6 8 7 9 2 3 4 5 10 11 12 1. Lens shift cover (→ page 23) 2. Zoom Lever (→ page 26) 3. Lens 4. Focus Ring (→ page 25) 5. Lens Cap 6. Indicators (→ page 8, 144) 7. Remote Sensor (→ page 14)
  • NEC NP-P547UL | User Manual English - Page 27
    1. Check the product overview, supplied items and part names Mounting the lens cap strap 1. Insert the tip of the strap into the lens cap mount hole and pass the knot through. Lens cap mount hole 2. Insert the knot into the strap mount hole (large) on the bottom of the projector, then press it into
  • NEC NP-P547UL | User Manual English - Page 28
    Rear 1. Check the product overview, supplied items and part names 1 4 3 5 2 1. Terminal Panel (→ page 9) 2. AC Input Connect the supplied power cord's threepin plug here, and plug the other end into an active wall outlet. (→ page 16) 3. Intake Vent 4. Remote Sensor (→ page 14) 5. Exhaust Vent
  • NEC NP-P547UL | User Manual English - Page 29
    Controls/Indicators 432 1. Check the product overview, supplied items and part names 5 1 6 7 8 9 1. (POWER) Button (→ page 18, 33) 2. POWER Indicator (→ page 16, 18, 33, 144) 3. STATUS Indicator (→ page 144) 4. LIGHT Indicator (→ page 144) 5. INPUT Button (→ page 20) 6. MENU Button (→ page
  • NEC NP-P547UL | User Manual English - Page 30
    control the projector using serial communication protocol. If you are writing your own program, typical PC control codes are on page 137. 10. Wireless LAN cover ( ) There are two terminals behind the cover. • USB (Wireless LAN) Port (→ page 90) • SERVICE Port (USB Type B) (for
  • NEC NP-P547UL | User Manual English - Page 31
    1. Check the product overview, supplied items and part names 1-4. Part Names of the Remote Control 1 1. Infrared Transmitter 3 (→ page 14) 2 4 2. POWER ON ( ) Button (→ page 18) 5 6 3. POWER STANDBY ( ) Button 8 7 (→ page 33) 10 4. SOURCE Button 11 9 (→ page 20) 5. HDMI1 Button (→
  • NEC NP-P547UL | User Manual English - Page 32
    1. Check the product overview, supplied items and part names 12. USB-A Button (→ page 20, 98) 16 13. USB-B Button 12 (This button does not work in this series of projec- 14 tors) 13 14. APPS Button 15 17 (→ page 20, 109) 19 18 15. ID SET Button 20 21 (→ page 72) 22 16. Numeric
  • NEC NP-P547UL | User Manual English - Page 33
    1. Check the product overview, supplied items and part names 23. ENTER Button (→ page 48) 24. D-ZOOM (+)(−) Button (→ page 36) 25. MOUSE L-CLICK Button (This button does not work in this series of projectors) 26. MOUSE R-CLICK Button (This button does not work in this series of projec- tors
  • NEC NP-P547UL | User Manual English - Page 34
    off. OPEN 2. Install new batteries (AAA). Ensure that you have the batteries' polarity (+/−) aligned correctly. 3. Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries or new and old batteries. OPEN Remote Control Precautions •
  • NEC NP-P547UL | User Manual English - Page 35
    1. Check the product overview, supplied items and part names Operating Range for Wireless Remote Control 30° 30° 30° 30° Remote control 23 feet/7 m 30° 30° Remote sensor on projector cabinet 23 feet/7 m 30° 30° • The infrared signal operates by line-of-sight up to a distance of about 23
  • NEC NP-P547UL | User Manual English - Page 36
    2. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. 2-1. Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 16) Step 2 • Turning on the projector (→ page 18) Step 3 •
  • NEC NP-P547UL | User Manual English - Page 37
    2. Projecting an Image (Basic Operation) 2-2. Connecting Your Computer/Connecting the Power Cord 1. Connect your computer to the projector. This section will show you a basic connection to a computer. For information about other connections, see "5. Making Connections" on page 83. Connect the
  • NEC NP-P547UL | User Manual English - Page 38
    2. Projecting an Image (Basic Operation) When the power cord is connected, the POWER indicator of this projector flashes orange and the unit goes into the standby mode. (In the state, [STANDBY MODE] is [NORMAL].) COMPUTER IN Computer cable (VGA) (not supplied) Make sure that the prongs are fully
  • NEC NP-P547UL | User Manual English - Page 39
    2-3. Turning on the Projector 2. Projecting an Image (Basic Operation) WARNING The projector produces a strong light. When turning on the power, make sure no one within projection range is looking at the lens. 1. Remove the lens cap. With the lens cap's stopper pressed up, pull forward and off.
  • NEC NP-P547UL | User Manual English - Page 40
    2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 30 menu languages. To select a menu language, follow these steps: 1. Use the or
  • NEC NP-P547UL | User Manual English - Page 41
    2. Projecting an Image (Basic Operation) 2-4. Selecting a Source Selecting the computer or video source NOTE: • Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the INPUT button once. The projector will search for the available
  • NEC NP-P547UL | User Manual English - Page 42
    2. Projecting an Image (Basic Operation) Selecting Default Source You can so that it will be displayed each time the projector is turned on. 1. Press the MENU button. The menu will be displayed. 2. Press the ▶ button twice to select [SETUP] and the ▼ button or the ENTER button to select [GENERAL].
  • NEC NP-P547UL | User Manual English - Page 43
    2. Projecting an Image (Basic Operation) 2-5. Adjusting the Picture Size and Position Use the lens shift dial, the adjustable tilt foot lever, the zoom lever/zoom ring and the focus ring to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity. Adjusting
  • NEC NP-P547UL | User Manual English - Page 44
    from the front could expose your eyes to strong light which could injure them. 1. Open the lens shift cover. Open with the cover's stopper pushed forward. • The lens shift cover cannot be removed. Stopper 2. Turn the lens shift dials clockwise or counterclockwise. Vertical dial Turn this clockwise
  • NEC NP-P547UL | User Manual English - Page 45
    or strong shaking may cause a projected image to slightly shift down. 3. Close the lens shift cover. Insert the cover's 2 (two) hooks into the grooves in the projector, then close the cover. Hook Groove TIP: • The diagram below shows the lens shift adjustment range ([ORIENTATION]: [DESKTOP FRONT
  • NEC NP-P547UL | User Manual English - Page 46
    Focus Use the focus ring to obtain the best focus. Focus ring 2. Projecting an Image (Basic Operation) NOTE: • Recommend to perform the focus adjustment after leaving the projector under the state the TEST PATTERN has been projected for over 30 minutes. Please refer to page 73 about the TEST
  • NEC NP-P547UL | User Manual English - Page 47
    Zoom Turn the zoom lever clockwise and counterclockwise. 2. Projecting an Image (Basic Operation) Zoom lever 26
  • NEC NP-P547UL | User Manual English - Page 48
    Adjusting the tilt (Tilt foot) Adjusting the left and right tilt. 1. Turn the left and right tilt feet to adjust. The tilt feet lengthen and shorten when turned. The height of the projected image is adjusted by turning the left and right tilt feet. If the projected image is tilted, turn one of the
  • NEC NP-P547UL | User Manual English - Page 49
    2. Projecting an Image (Basic Operation) 2-6. Correcting Keystone Distortion [KEYSTONE] When the projector is not exactly perpendicular to the screen, keystone distortion occurs. For correcting this distortion, you can use the "Keystone" function, a digital technology that can adjust for keystone-
  • NEC NP-P547UL | User Manual English - Page 50
    5. Press the ▼ button to select [KEYSTONE VERTICAL] and then use the ◀ or ▶ so that the left and right sides of the projected image are parallel. • Adjust the vertical keystone distortion. 2. Projecting an Image (Basic Operation) Screen frame Projected area 6. Align the left (or right) side of
  • NEC NP-P547UL | User Manual English - Page 51
    2. Projecting an Image (Basic Operation) NOTE: • Even when the projector is turned on, the last used correction values are applied. • The KEYSTONE feature can cause an image to be slightly blurred because the correction is made electronically. 30
  • NEC NP-P547UL | User Manual English - Page 52
    2. Projecting an Image (Basic Operation) To return the keystone adjustments to default: 1. Display the [GEOMETRIC CORRECTION] screen, and make sure [KEYSTONE] is selected at [MODE]. 2. Press the ▼ button to select [RESET] and press the ENTER button. 3. Press the ◀ or ▶ button to select [YES] and
  • NEC NP-P547UL | User Manual English - Page 53
    not be displayed correctly. • If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE] manually. (→ page 59, 60) 2-8. Turning Up or Down Volume Sound level from the speaker or audio output can be adjusted. When no menus appear
  • NEC NP-P547UL | User Manual English - Page 54
    2-9. Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the STANDBY button on the remote control. The confirmation message will be displayed. • The confirmation message displayed when the power is turned off indicates the amount of CO2
  • NEC NP-P547UL | User Manual English - Page 55
    2. Projecting an Image (Basic Operation) CAUTION: Parts of the projector may become temporarily heated if the projector is turned off with the POWER button. Be careful to handle the projector. NOTE: • While the POWER indicator is blinking blue in short cycles, the power cannot be turned off. • You
  • NEC NP-P547UL | User Manual English - Page 56
    3. Convenient Features 3-1. Turning off the Image and Sound Press the AV-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. NOTE: • Even though the image is turned off, the menu still remains on the screen. 3-2. Freezing a Picture
  • NEC NP-P547UL | User Manual English - Page 57
    3-3. Magnifying a Picture You can enlarge the picture up to four times. NOTE: • The maximum magnification may be less than four times depending on the signal. To do so: 1. Press the D-ZOOM (+) button to magnify the picture. To move the magnified image, use the or ▶ button. 3. Convenient Features
  • NEC NP-P547UL | User Manual English - Page 58
    be at about 60%. The cooling fan will also slow down accordingly. Lower power consumption Brightness will be at about 80% (P627UL) or about 65%(P547UL). This setting accords priority to prolonging the life of the light module. To turn on the [ECO MODE], do the following: 1. Press the ECO Button
  • NEC NP-P547UL | User Manual English - Page 59
    3. Convenient Features Checking Energy-Saving Effect [CARBON METER] This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector's [ECO MODE] is set to [ECO] or [LONG LIFE]. This feature is called as [CARBON METER]. There are two messages: [TOTAL CARBON
  • NEC NP-P547UL | User Manual English - Page 60
    3. Convenient Features 3-5. Correcting distortion of projected image Use the [CORNERSTONE] and [PINCUSHION] features to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right side of the screen longer or shorter so that the projected image is rectangular. Before
  • NEC NP-P547UL | User Manual English - Page 61
    5. Press the ▼ button to select [CORNERSTONE] and press the ENTER button. The [CORNERSTONE] screen will be displayed. * The drawing shows the upper left icon ( ) is selected. 6. Project an image so that the screen is smaller than the area of the raster. 7. Pick up any one of the corners and align
  • NEC NP-P547UL | User Manual English - Page 62
    13. Press the ◀ or ▶ button to highlight the [OK] and press the ENTER button. This completes the Cornerstone correction. • Selecting [CANCEL] will return to the adjustment screen without saving changes (Step 3). • Selecting [RESET] will return to the factory default. • Selecting [UNDO] will exit
  • NEC NP-P547UL | User Manual English - Page 63
    3. Convenient Features Pincushion By this feature, it enables to adjust left and right side or top and bottom side independently for reforming pincushion distortion. 1. Press the ▼ button with no menu displayed. The [GEOMETRIC CORRECTION] screen will be displayed. • Press the KEYSTONE button when
  • NEC NP-P547UL | User Manual English - Page 64
    6. Press the ◀ or ▶ button to correct distortion. NOTE: • The [PINCUSHION LEFT/RIGHT] or [PINCUSHION TOP/BOT- TOM] item is not available when [KEYSTONE HORIZONTAL], [KEYSTONE VERTICAL] or [CORNERSTONE] is activated. • Before performing correction, set the lens shift to the center position. 7. After
  • NEC NP-P547UL | User Manual English - Page 65
    shaped surfaces (cylindrical or spherical surfaces, for example) can be corrected using our ProAssist application. Please download ProAssist from our web site. https://www.sharp-nec-displays.com/dl/en/index.html 44
  • NEC NP-P547UL | User Manual English - Page 66
    3. Convenient Features 3-6. Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword
  • NEC NP-P547UL | User Manual English - Page 67
    3. Convenient Features 7. Type in the same combination of buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The [SECURITY] function has been enabled. To turn on the projector when [SECURITY] is enabled: 1. Press the POWER
  • NEC NP-P547UL | User Manual English - Page 68
    3. Convenient Features To disable the [SECURITY] function: 1. Press the MENU button. The menu will be displayed. 2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button. The [OFF/ON] menu will be displayed. 3. Select [OFF] and press the ENTER button. The [SECURITY KEYWORD] screen
  • NEC NP-P547UL | User Manual English - Page 69
    4. Using On-Screen Menu 4-1. Using the Menus NOTE: • The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: • The commands such as ENTER, EXIT in the
  • NEC NP-P547UL | User Manual English - Page 70
    Menu Elements Tab Available buttons Source Highlight Slide bar 4. Using On-Screen Menu Solid triangle Radio button Wireless symbol ECO mode symbol Thermometer symbol Menu mode Off Timer remaining time Key Lock symbol Menu windows or dialog boxes typically have the following elements:
  • NEC NP-P547UL | User Manual English - Page 71
    4. Using On-Screen Menu 4-2. List of Menu Items Some menu items are not available depending on the input source. The below listed menu items are on the advanced menu. The mark (B) is added to the items on the basic menu. Shaded characters ( ) represent default settings. INPUT ADJUST HDMI1 HDMI2
  • NEC NP-P547UL | User Manual English - Page 72
    TOOL OFF, 1, 2, 3 RESET MENU COLOR SELECT COLOR, MONOCHROME INPUT DISPLAY OFF, ON ID DISPLAY OFF, ON ECO MESSAGE OFF, ON DISPLAY TIME MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC BACKGROUND BLUE, BLACK, LOGO INSTALLATION ORIENTATION AUTO, DESKTOP FRONT, CEILING REAR, DESKTOP REAR
  • NEC NP-P547UL | User Manual English - Page 73
    Menu Item SETUP OPTIONS(1) SEAMLESS SWITCHING FAN MODE SIGNAL SELECT COMPUTER WXGA MODE DEINTERLACE VIDEO LEVEL HDMI1 HDMI2 HDBaseT AUDIO SELECT HDMI1 HDMI2 LAN HDBaseT BEEP LAN PORT OPTIONS(2) STANDBY MODE DIRECT POWER ON AUTO POWER ON AUTO POWER OFF TIME MODE DEFAULT
  • NEC NP-P547UL | User Manual English - Page 74
    Menu Item INFO. WIRELESS LAN IP ADDRESS SUBNET MASK GATEWAY MAC ADDRESS SSID NETWORK TYPE SECURITY CHANNEL SIGNAL LEVEL VERSION(1) (B) FIRMWARE DATA VERSION(2) (B) FIRMWARE2 DATA2 OTHERS (B) DATE TIME PROJECTOR NAME HOST NAME MODEL NO. SERIAL NUMBER LAN UNIT TYPE CONTROL ID
  • NEC NP-P547UL | User Manual English - Page 75
    : • When the component input signal is connected to the COMPUTER IN terminal, select [COMPUTER]. [HDBaseT] Projects the signal transmitted from the terminals supported HDBaseT. [USB-A] Start the [VIEWER]. Project the data of the USB memory set in this machine. [LAN] Display the start-up screen of
  • NEC NP-P547UL | User Manual English - Page 76
    4-4. Menu Descriptions & Functions [ADJUST] [PICTURE] 4. Using On-Screen Menu [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are seven factory presets optimized for various types of images. You
  • NEC NP-P547UL | User Manual English - Page 77
    4. Using On-Screen Menu [DETAIL SETTINGS] This function allows you to store your customized settings in [PRESET 1] to [PRESET 7]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION], [SCREEN SIZE], [COLOR TEMPERATURE], [DYNAMIC CONTRAST], [IMAGE MODE], and [COLOR
  • NEC NP-P547UL | User Manual English - Page 78
    4. Using On-Screen Menu Adjusting Color Temperature [COLOR TEMPERATURE] Adjust the balance of the colors (R, G, B) to optimize the color reproducibility. A color temperature with a high numerical value becomes bluish white while one with a low numerical value becomes reddish white. A value between
  • NEC NP-P547UL | User Manual English - Page 79
    4. Using On-Screen Menu [CONTRAST] Adjusts the intensity of the image according to the incoming signal. [BRIGHTNESS] Adjusts the brightness level or the back raster intensity. [SHARPNESS] Controls the detail of the image. [COLOR] Increases or decreases the color saturation level. [HUE] Varies the
  • NEC NP-P547UL | User Manual English - Page 80
    [IMAGE OPTIONS] 4. Using On-Screen Menu Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust [CLOCK] and [PHASE]. CLOCK Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function
  • NEC NP-P547UL | User Manual English - Page 81
    4. Using On-Screen Menu Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. NOTE: • [CLOCK], [PHASE], [HORIZONTAL] and [VERTICAL] can only be selected when inputting analog signals. • An image can be distorted during the adjustment of
  • NEC NP-P547UL | User Manual English - Page 82
    than the projector's native resolution is displayed, [NATIVE] is not available. TIP: • This table shows typical resolutions and aspect ratios that most computers support. VGA SVGA XGA WXGA WXGA WXGA+ SXGA SXGA+ UXGA Full HD WUXGA 4K Resolution 640 × 480 800 × 600 1024 × 768 1280 × 768 1280
  • NEC NP-P547UL | User Manual English - Page 83
    [AUDIO] 4. Using On-Screen Menu Turning Up or Down Sound Adjusts the volume of the projector speaker and AUDIO OUT (Stereo Mini Jack). TIP: • When no menus appear, the ◀ and ▶ buttons on the projector cabinet and the VOL. +/− buttons on the remote control work as a volume control. (→ page 32) 62
  • NEC NP-P547UL | User Manual English - Page 84
    controlling the brightness and fan speed, energy can be saved and motion noise and the power consumption can be lowered. The mode optimizes the service life of the light module. Brightness can be adjusted in 1% increments from 50 to 100%. When several projectors are used for multi-screen projection
  • NEC NP-P547UL | User Manual English - Page 85
    CONSTANT BRIGHTNESS OFF ON 4. Using On-Screen Menu [CONSTANT BRIGHTNESS] mode will be canceled. Maintains the brightness that is in effect at the time [ON] is selected. Unless [OFF] is selected, the same settings will remain in effect even when the projector is turned off. • To re-adjust the
  • NEC NP-P547UL | User Manual English - Page 86
    Selecting Menu Language [LANGUAGE] You can choose one of 30 languages for on-screen instructions. NOTE: • Your setting will not be affected even when [RESET] is done from the menu. 4. Using On-Screen Menu 65
  • NEC NP-P547UL | User Manual English - Page 87
    [KEYSTONE] You can correct horizontal or vertical keystone, pincushion LEFT/RIGHT or TOP/BOTTOM, or cornerstone distortion manually. NOTE: • [KEYSTONE HORIZONTAL] and [KEYSTONE VERTICAL] can be adjusted at once. • To change from one item to another item, reset the first item. • Adjustment values
  • NEC NP-P547UL | User Manual English - Page 88
    4. Using On-Screen Menu PINCUSHION TOP/BOTTOM Corrects pincushion distortion at the top or bottom side. (→ page 42) CORNERSTONE Fits a projected image within the border of the screen easily by align the four corner of an image to the ones of the screen. (→ page 39) TIP: • Adjustable range of the
  • NEC NP-P547UL | User Manual English - Page 89
    option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the factory preset. 68
  • NEC NP-P547UL | User Manual English - Page 90
    4. Using On-Screen Menu Selecting a Color or Logo for Background [BACKGROUND] When the HDMI1, HDMI2, COMPUTER or HDBaseT input terminal is selected, select the desired background when there is no input signal. BLUE The background color is blue BLACK The background color is black LOGO Display
  • NEC NP-P547UL | User Manual English - Page 91
    . The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. WARNING • Should special works be required, for example to suspend the projector from the ceiling, consult your dealer. Never try to install the projector yourself in such
  • NEC NP-P547UL | User Manual English - Page 92
    ] is done from the menu. Selecting Communication Speed [COMMUNICATION SPEED] This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on
  • NEC NP-P547UL | User Manual English - Page 93
    of the projector cannot be used when the separately sold cable cover is mounted on the projector. Setting ID to the Projector ID], the projector cannot be operated by using the remote control that does not support the CONTROL ID function. (In this case the buttons on the projector cabinet can
  • NEC NP-P547UL | User Manual English - Page 94
    on the pattern, adjust the projector installation angle or correct distortion by pressing the KEYSTONE button on the remote. If the focus adjustment is required, control the focus lever. Recommend to perform the focus adjustment after leaving the projector under the state the TEST PATTERN has been
  • NEC NP-P547UL | User Manual English - Page 95
    [OPTIONS(1)] 4. Using On-Screen Menu Switching the displayed image smoothly [SEAMLESS SWITCHING] When the input connector is switched, the image displayed before switching is held to switch to the new image without a break due to absence of a signal. Selecting Fan Mode [FAN MODE] [FAN MODE] is
  • NEC NP-P547UL | User Manual English - Page 96
    Enabling the deinterlace [DEINTERLACE] Turns on or off the deinterlace function for a telecine signal. OFF Select this option if there is any jitter or artifacts in video. ON Default standard setting. 4. Using On-Screen Menu NOTE: • This function is not available for HDTV (progressive) and
  • NEC NP-P547UL | User Manual English - Page 97
    features will work: POWER button on the projector cabinet and the remote control, powering on from PC Control command, [AUTO POWER ON], [NETWORK SERVICE]. The projector is maintained in the sleep mode. In addition to the buttons, terminals and functions that operate in the network standby mode, you
  • NEC NP-P547UL | User Manual English - Page 98
    STANDBY MODE]. When [STANDBY MODE] → [NETWORK STANDBY] is selected - When [NETWORK SERVICE] → [AMX BEACON] → [ON] is selected - When [NETWORK SERVICE] → [Extron XTP] → [ON] is selected - When [NETWORK SERVICE] → [CRESTRON] → [Crestron Control] → [ON] is selected - When [NETWORK SETTINGS] → [WIRELESS
  • NEC NP-P547UL | User Manual English - Page 99
    turned on. Displays the computer signal from the COMPUTER IN terminal every time the projector is turned on. Projects the signal transmitted from the terminals supported HDBaseT. Display the [VIEWER]. Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit. 78
  • NEC NP-P547UL | User Manual English - Page 100
    4. Using On-Screen Menu Setting carbon footprint factor [CARBON CONVERT] Adjusts the carbon footprint factor in the carbon saving calculation. The initial setting is 0.505[kgCO2/kWh]. Selecting your currency [CURRENCY] Displays electricity pricing (available in 4 currency units). $ US Dollar €
  • NEC NP-P547UL | User Manual English - Page 101
    4-6. Menu Descriptions & Functions [INFO.] 4. Using On-Screen Menu Displays the status of the current signal and light module usage. This item has nine pages. The information included is as follows: TIP: • Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE
  • NEC NP-P547UL | User Manual English - Page 102
    [SSID] [SECURITY] [SIGNAL LEVEL] [VERSION(1)] [FIRMWARE] Version [VERSION(2)] [FIRMWARE2] Version [OTHERS] [DATE TIME] [HOST NAME] [SERIAL NUMBER] [CONTROL ID] (when [CONTROL ID] is set) [CONDITIONS] [INTAKE TEMPERATURE] [NETWORK TYPE] [CHANNEL] 4. Using On-Screen Menu [DATA] Version [DATA2]
  • NEC NP-P547UL | User Manual English - Page 103
    4-7. Menu Descriptions & Functions [RESET] 4. Using On-Screen Menu Returning to Factory Default [RESET] The [RESET] feature allows you to change adjustments and settings to the factory preset for a (all) source(s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal
  • NEC NP-P547UL | User Manual English - Page 104
    . Please get ready a suitable cable for the connection. NOTE: • Signals supported by Plug & Play (DDC2) INPUT COMPUTER IN HDMI 1 IN analog digital NOTE: • The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher. • An image may not be displayed correctly when
  • NEC NP-P547UL | User Manual English - Page 105
    HDMI cable (not supplied) Use High Speed HDMI® Cable. HDMI 1 IN COMPUTER IN HDMI 2 IN AUDIO IN 5. Making Connections Stereo mini-plug audio cable (not supplied) Computer cable (VGA) (not supplied) To mini D-Sub 15-pin terminal on the projector. It is recommended that you use a commercially
  • NEC NP-P547UL | User Manual English - Page 106
    cable has been disconnected and then reconnected, an image may not be correctly displayed. Should this happen, restart your PC. • The COMPUTER video input terminals support Windows Plug and Play. • A Mac signal adapter (commercially available) may be required to connect a Mac computer. 85
  • NEC NP-P547UL | User Manual English - Page 107
    projector. Input terminal COMPUTER IN INPUT button on the projector cabinet COMPUTER Button on the remote control COMPUTER NOTE: • Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements. 86
  • NEC NP-P547UL | User Manual English - Page 108
    5. Making Connections Connecting HDMI Input You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the HDMI IN terminal of your projector. HDMI 1 IN HDMI 2 IN HDMI cable (not supplied) Use High Speed HDMI® Cable. Audio cable (not supplied)
  • NEC NP-P547UL | User Manual English - Page 109
    5. Making Connections 5-3. Connecting to a Wired LAN When the projector is connected to a wired LAN, you can use the web browser on a computer to control the projector using the HTTP server function. For more information, see "7. Connecting to a Network" (→ page 108). Example of LAN connection
  • NEC NP-P547UL | User Manual English - Page 110
    to a Wireless LAN (Optional: NP05LM series) The USB Wireless LAN Unit also provides a wireless LAN connection. To use a wireless LAN connection, you are required to assign an IP address to the projector. For more information, see "7. Connecting to a Network" (→ page 108). Important: • If you use the
  • NEC NP-P547UL | User Manual English - Page 111
    again. • Do not insert other USB devices into the USB (wireless LAN) port in the wireless LAN cover. Do not insert the USB Wireless LAN unit into the USB port. NOTE: • When the cable cover is attached, remove it before inserting the USB Wireless LAN Unit. 1. Press the POWER button to turn
  • NEC NP-P547UL | User Manual English - Page 112
    : • Do not force to insert the USB Wireless LAN Unit. 4. Mount the wireless LAN cover. (1) Insert the hook on the back of the cover into the groove in the projector and close the wireless LAN cover. 5. Making Connections WIRELESS WIRELESS Groove Hook (2) Turn the screw clockwise to tighten it
  • NEC NP-P547UL | User Manual English - Page 113
    /HDBaseT port of the projector (RJ-45) to a HDBaseT transmission device sold commercially. The Ethernet/HDBaseT port of the projector supports HDMI signals (HDCP) from transmission devices, serial control from external devices, and remote control signals (IR commands). Connection example Computer
  • NEC NP-P547UL | User Manual English - Page 114
    5. Making Connections NOTE: • Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially). • The maximum transmission distance over the LAN cable is 100 m. (the maximum distance is 70 m for a 4K signal) • Short cable such as 0.5 m is not applicable
  • NEC NP-P547UL | User Manual English - Page 115
    intake vent or the exhaust vent may be obstructed, resulting in the projector getting warm and the possibility of fire and malfunction occurring. • A stand for supporting the projector needs to be made for this purpose. In this case, the stand must be designed such that the center of gravity of the
  • NEC NP-P547UL | User Manual English - Page 116
    5. Making Connections Design and manufacturing conditions for the stand Please engage an installation service provider for the design and manufacture of the customized stand to be used for portrait projection. Please ensure that the following are complied with when
  • NEC NP-P547UL | User Manual English - Page 117
    5. Making Connections Reference drawings * The drawing showing the dimensional requirements is not an actual stand design drawing. (Unit: mm) 200 Screw holes for 4 - M4 use Notch Intake vent 250 Exhaust Vent [Front View] [Side View]
  • NEC NP-P547UL | User Manual English - Page 118
    the USB memory inserted into the projector is not recognized. - Refer to the instruction manual or the help file of the Windows you are using for details on how ) EXIF EXIF information (rotation/thumbnail, etc.) is not supported. PNG Extension png (case insensitive) Format Normal, interlace
  • NEC NP-P547UL | User Manual English - Page 119
    6. Using the VIEWER 6-2. Projecting the pictures on a USB memory (basic operation) This section explains the basic operations of the [VIEWER]. This is the operating procedure when the option menu (→ page 105) of the [VIEWER] is in the default state when shipped from the factory. ① Start the [
  • NEC NP-P547UL | User Manual English - Page 120
    6. Move the cursor to the folder or image file with the buttons and press the ENTER button. • When a folder is selected, the file list screen for the folder is displayed. • If an image file is selected, the slide screen will be displayed. 7. Move the cursor to the image file in the file list screen
  • NEC NP-P547UL | User Manual English - Page 121
    11. Press the ▶ button to move the cursor to , then press the ENTER button. The picture will rotate clockwise by 90°. • Every time you press the ENTER button in this state, the picture rotates 90° clockwise. 12. Press the ▶ button to move the cursor to , then press the ENTER button. The control
  • NEC NP-P547UL | User Manual English - Page 122
    5. Remove the USB memory from the projector. NOTE: • If you remove a USB memory from the projector without executing [REMOVE USB DEVICE] in the menu, the operation of the unit may become unstable. In that case, turn off the power of the unit once and unplug the power cord from the outlet.
  • NEC NP-P547UL | User Manual English - Page 123
    6-3. Slide screen operations The following operations can be performed on the slide screen. 6. Using the VIEWER Button name ▶, PAGE ▽ ◀, PAGE △ ENTER EXIT MENU Description Project the next picture. Project the previous picture. Display the pointer (→). The pointer moves when you press the button
  • NEC NP-P547UL | User Manual English - Page 124
    6-4. File list screen operations How to view the file list screen ②①③ 6. Using the VIEWER ④ ⑤ Display name ① Path ②To the upper level ③Picture or folder (icon display or) thumbnail display ④Filename of the selected picture ⑤Information display Description Display the path of the projected
  • NEC NP-P547UL | User Manual English - Page 125
    6. Using the VIEWER File list screen operations Button name ENTER EXIT MENU PAGE ▽ PAGE △ Description Move the cursor. • If the cursor is on a picture, the display switches to the slide screen. • If the cursor is on a folder, the files in the folder are displayed. • If the cursor is on [UP
  • NEC NP-P547UL | User Manual English - Page 126
    the thumbnails of picture files displayed in the file list screen. • OFF: Display as icons. • ON: Display as thumbnails. When shipped from the factory MANUAL 5 (seconds) OFF SLIDE OFF Example SORT Set the sort order when the file list is displayed. • NAME (ABC..)/NAME (ZYX..): Display in the
  • NEC NP-P547UL | User Manual English - Page 127
    6. Using the VIEWER 6-6. Changing the logo data (background image) • You can change the screen of the input terminal in a signal-less state (background logo) or the background image of the MultiPresenter start-up screen (MultiPresenter logo). • You can also set a password to prohibit third
  • NEC NP-P547UL | User Manual English - Page 128
    6. Using the VIEWER ③ Set a password so that the logo will not be changed without authorization This section explains the procedure for setting the password for the first time. 1. Move the cursor to [LOGO PASSWORD] in the sub-menu and press the ENTER button. The [PASSWORD SETTINGS] screen is
  • NEC NP-P547UL | User Manual English - Page 129
    's website for more details about MultiPresenter. https://www.sharp-nec-displays.com/dl/en/soft/multipresenter/index.html AB Simultaneous display projector or configure the [NETWORK SETTINGS]. • By configuring the network service settings of the projector, AMX beacon, Extron XTP, HTTP server logon
  • NEC NP-P547UL | User Manual English - Page 130
    the [NETWORK SETTINGS] of the projector. (→ page 111) • Install the MultiPresenter app in the computer or tablet terminal. https://www.sharp-nec-displays.com/dl/en/soft/multipresenter/index.html The procedure is described here for each wireless LAN profile [INTELLIGENT CONNECTION], [INFRASTRUCTURE
  • NEC NP-P547UL | User Manual English - Page 131
    7. Connecting to a Network ② When connecting with [INFRASTRUCTURE] 1. Turn on the power of the projector and press the APPS button on the remote controller. The start-up screen of MultiPresenter is displayed. 2. Connect the projector and your computer or tablet terminal to the same network. NOTE: •
  • NEC NP-P547UL | User Manual English - Page 132
    7. Connecting to a Network 7-3. NETWORK SETTINGS Move the cursor to [ NETWORK SETTINGS] at the bottom right of the start-up screen and press the ENTER button to display the [NETWORK SETTINGS] screen. ① ② ③ ④ ⑤ ⑥ Important: For customers connecting the projector to a network The default [
  • NEC NP-P547UL | User Manual English - Page 133
    press the ENTER button. TIP: • If you did not set a network password or when changing the set password, you may select [NETWORK SETTINGS] → [NETWORK SERVICE] → [NETWORK PASSWORD] from the on-screen menu to set or change the password later. • When a network password has been set, you need to display
  • NEC NP-P547UL | User Manual English - Page 134
    7. Connecting to a Network ③ WIRED LAN Configure the profile of the wired LAN, DHCP, IP address, subnet mask, gateway, DNS and so on. • When using a wired LAN, set the profile to [ENABLE] and configure the necessary settings. • If you are not using a wired LAN, set the profile to [DISABLE]. • Once
  • NEC NP-P547UL | User Manual English - Page 135
    7. Connecting to a Network ④ WIRELESS LAN Configure the wireless LAN settings. Item name PROFILE Description There are 4 wireless LAN profiles as shown below. • DISABLE (initial value) • INTELLIGENT CONNECTION • SIMPLE ACCESS POINT • INFRASTRUCTURE The settings of profiles are different from each
  • NEC NP-P547UL | User Manual English - Page 136
    7. Connecting to a Network [SIMPLE ACCESS POINT] Turn the projector into the [SIMPLE ACCESS POINT] to connect computers or tablet terminals installed with MultiPresenter to the projector. Item name PROFILE MODE CHANNEL SSID SECURITY TYPE SECURITY KEY Description SIMPLE ACCESS POINT Select the
  • NEC NP-P547UL | User Manual English - Page 137
    Set the MultiPresenter operation. Item name MODE PIN TYPE PIN CODE UTILIZE PIN CODE AS CONNECTION PASSWORD COMMUNICATION SPEED LIMIT GET APPS GUIDE STEP TO CONNECT CONNECTION INFORMATION CONNECTION INFORMATION Description Select [FREE] mode or [MANAGED] mode. When you are in the [MANAGED] mode
  • NEC NP-P547UL | User Manual English - Page 138
    7. Connecting to a Network ⑥ NETWORK SERVICE Configure the [AMX BEACON], [Extron XTP], [HTTP SERVER], [PJLink], [ALERT MAIL], [CRESTRON] and other settings. Item name AMX BEACON Extron XTP HTTP SERVER PJLink ALERT
  • NEC NP-P547UL | User Manual English - Page 139
    7. Connecting to a Network Item name CRESTRON Description Set the CRESTRON function. Crestron Room View Crestron Room View Select whether to use Crestron Room View or not. • Initial value: OFF (do not use) Crestron Control Crestron Control Select whether to use Crestron Control or not. •
  • NEC NP-P547UL | User Manual English - Page 140
    and operations for: • Setting for wired/wireless network (NETWORK SETTINGS) To use wireless LAN connection, the optional USB Wireless LAN Unit is required. (→ page 90) To use wired/wireless LAN connection, connect the projector to the computer with a commercially available LAN cable. (→ page 88
  • NEC NP-P547UL | User Manual English - Page 141
    of the computer being used. Example 1: When the host name of the projector has been set to "pj.nec.co.jp", access is gained to the network setting by specifying http://pj.nec.co.jp/index.html for the address or the entry column of the URL. Example 2: When the IP address
  • NEC NP-P547UL | User Manual English - Page 142
    Switches to the HDMI 2 IN terminal. COMPUTER Switches to the COMPUTER IN terminal. HDBaseT Switch to image input sent from a transmission device that supports HDBaseT. USB-A Switches to the data on the USB memory device. LAN Switches to a LAN signal. This displays the condition of the
  • NEC NP-P547UL | User Manual English - Page 143
    7. Connecting to a Network NETWORK SETTINGS For details on each of the [NETWORK SETTINGS], see "7-3. NETWORK SETTINGS" (→ page 111). VERSION Displays the firmware and data version of the unit. 122
  • NEC NP-P547UL | User Manual English - Page 144
    8. Maintenance 8-1. Cleaning the Lens • The projector has a plastic lens. Use a commercially available plastic lens cleaner. • Do not scratch or mar the lens surface as a plastic lens is easily scratched. • Never use alcohol or glass lens cleaner as doing so will cause damage to the plastic lens
  • NEC NP-P547UL | User Manual English - Page 145
    8. Maintenance 8-2. Cleaning the Cabinet Turn off the projector, and unplug the projector before cleaning. • Use a dry soft cloth to wipe dust off the cabinet. If heavily soiled, use a mild detergent. • Never use strong detergents or solvents such as alcohol or thinner. • When cleaning the
  • NEC NP-P547UL | User Manual English - Page 146
    page, to project wide images on a 150 screen, install at about 4.0 m from the front. Also, from the lower table we can see that about 2.2 m are required from the projector's lens center to the upper edge of the screen. Use this to see whether or not enough height can be provided from
  • NEC NP-P547UL | User Manual English - Page 147
    Tables of screen sizes and dimensions Screen height Screen size (diagonal) 9. Appendix Size (inches) 30 40 50 60 80 100 120 150 200 250 300 Screen width Screen width (cm) (inches) 64.6 25.4 86.2 33.9 107.7 42.4 129.2 50.9 172.3 67.8 215.4 84.8 258.5 101.8 323.1 127.2 430.8
  • NEC NP-P547UL | User Manual English - Page 148
    9. Appendix Example of installation on a desktop The diagram below shows an example of when the projector is used on a desktop. Horizontal projection position: Equal distance to the left and right from the center of the lens Vertical projection position: (see table below) Lens center Approximately
  • NEC NP-P547UL | User Manual English - Page 149
    9. Appendix Lens shifting range This projector is equipped with a lens shift function (→ page 23) for adjusting the image position using dials. Lens shifting is possible within the range shown below. NOTE: • In case lens shifted volume exceeds the below illustrated range, blur and shade may appear
  • NEC NP-P547UL | User Manual English - Page 150
    9-2. Compatible Input Signal List Analog RGB Signal VGA SVGA XGA WXGA Quad-VGA SXGA SXGA+ WXGA+ WXGA++ UXGA WSXGA+ HD Full HD WUXGA MAC 13" MAC 16" MAC 19" MAC 21" MAC 23" Resolution (dots) 640 × 480 800 × 600 1024 × 768 1280 × 768 1280 × 800 1360 × 768 *1 1366 × 768 *1 1280 × 960 1280 × 1024 1400
  • NEC NP-P547UL | User Manual English - Page 151
    resolution on this projector *4 WXGA MODE: ON Depending on your player or disc, the projected image may not be displayed correctly. The projector does not support HDCP 2.2, 4K/60p. 130
  • NEC NP-P547UL | User Manual English - Page 152
    information about projector's performance. Model name P627UL P547UL Method Three primary color liquid crystal shutter projection method 1.5-2.1, f = 17.2-27.7 mm, Zoom Ratio = 1.6 Zoom Manual Focus Manual Lens shifting Manual (H: ±29%, V: +60%, −0%) Light source Laser diode with
  • NEC NP-P547UL | User Manual English - Page 153
    to [ECO] or [LONG LIFE] ([ECO]: About 60%, [LONG LIFE]: About 80% (P627UL) or about 65%(P547UL). If any other mode is selected as the [PRESET] mode, the light output value may drop slightly. *4 If rate 32/44.1/48 KHz, sample bit; 16/20/24-bit HDMI: Supports HDCP 1.4 HDBaseT: Supports HDCP 1.4 132
  • NEC NP-P547UL | User Manual English - Page 154
    's design are subject to change without notice. For additional information visit: US: https://www.sharpnecdisplays.us Europe: https://www.sharpnecdisplays.eu Global: https://www.sharp-nec-displays.com/global/ For information on our optional accessories, visit our website or see our brochure. 133
  • NEC NP-P547UL | User Manual English - Page 155
    9-4. Cabinet Dimensions 9. Appendix Unit: mm (inch) 407 (16) 20.5 (0.8) 122 (4.8) 480 (18.9) Lens center 149.7 (5.9) 149.7 (5.9) 110 (4.3) 77.5 (3.1) 142.5 (5.6) Lens center 115.1 (4.5) 200 (7.9) 250 (9.8) 134
  • NEC NP-P547UL | User Manual English - Page 156
    9. Appendix 9-5. Pin assignments and signal names of main terminals COMPUTER IN Terminal (Mini D-Sub 15 Pin) Connection and signal level of each pin 11 12 13 14 15 6 7 8 9 10 12345 Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
  • NEC NP-P547UL | User Manual English - Page 157
    Ethernet/HDBaseT/LAN Port (RJ-45) 12345678 Pin No. 1 2 3 4 5 6 7 8 Signal TxD+/HDBT0+ TxD−/HDBT0− RxD+/HDBT1+ Disconnection/HDBT2+ Disconnection/HDBT2− RxD−/HDBT1− Disconnection/HDBT3+ Disconnection/HDBT3− USB Port (Type A) 1 2 3 4 Pin No. 1 2 3 4 VBUS D− D+ Grounding Signal 9. Appendix PC
  • NEC NP-P547UL | User Manual English - Page 158
    9. Appendix 9-6. PC Control Codes and Cable Connection PC Control Codes Function POWER ON POWER OFF INPUT SELECT COMPUTER INPUT SELECT HDMI1 INPUT SELECT HDMI2 INPUT SELECT HDBaseT INPUT SELECT USB-A INPUT SELECT LAN PICTURE MUTE ON PICTURE MUTE OFF SOUND MUTE ON SOUND MUTE OFF Code Data 02H 00H
  • NEC NP-P547UL | User Manual English - Page 159
    PC Control Terminal (D-Sub 9P) To TxD of PC To RxD of PC To GND of PC 9. Appendix 12345 6789 To RTS of PC To CTS of PC NOTE: • Pins 1, 4, 6 and 9 are no used. • Jumper "Request to Send" and "Clear to Send" together on both ends of the cable to simplify cable connection. • For long cable runs it is
  • NEC NP-P547UL | User Manual English - Page 160
    9. Appendix 9-7. About the ASCII Control Command This device supports the common ASCII Control Command for controlling our projector and monitor. Please visit our web site for detailed information about the command. https://www.sharp-nec-displays.com/dl/en/pj_manual/lineup.html How to connect with
  • NEC NP-P547UL | User Manual English - Page 161
    Status command error:temp error:fan error:light error:system Response Temperature error Fan trouble Light source trouble System trouble Error Status 9. Appendix 140
  • NEC NP-P547UL | User Manual English - Page 162
    Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Common Problems & Solutions Problem We are not liable for any trouble and failure caused by this installation. • Signals may not be supported depending on the HDBaseT transmission
  • NEC NP-P547UL | User Manual English - Page 163
    Problem you are trying to display is supported by the projector. (→ page 129) • Adjust the computer image manually with the [HORIZONTAL]/[VERTICAL] in sensor on the back of the projector cannot be used when the cable cover is mounted on the projector. • When performing remote control operations via
  • NEC NP-P547UL | User Manual English - Page 164
    external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn affect. For setting display modes other than those supported by your Mac and the projector, changing is off on your MacBook. Refer to owner's manual supplied with your Mac computer for mirroring. •
  • NEC NP-P547UL | User Manual English - Page 165
    9. Appendix 9-9. Indicator Message Feature of each indicator ③②① ① POWER indicator This indicator informs the power status of the projector. ② STATUS indicator Lights up/flashes when a button is pressed with the [CONTROL PANEL LOCK] enabled, or when an error occurs in the projector. ③ LIGHT
  • NEC NP-P547UL | User Manual English - Page 166
    POWER STATUS LIGHT Projector status Preparing for powering ON Blue Off Off (Blink*3) *1 Repetition to light on for 1.5 seconds / off for 7.5 seconds *2 Repetition to light on for 2.5 seconds / off for 0.5 seconds *3 Repetition to light on for 0.5 seconds / off for 0.5 seconds 9. Appendix
  • NEC NP-P547UL | User Manual English - Page 167
    . ID numbers for the projector and the remote control do not match. Network conflict Temperature problem (In the Forced ECO mode) Temperature problem Hardware problem Error requiring service support Procedure The projector's keys are locked. The setting must be canceled to operate the projector
  • NEC NP-P547UL | User Manual English - Page 168
    9. Appendix When the thermal protector is activated: When inside temperature of the projector becomes too high or low, the POWER indicator start to red blink in a short cycle. After this happened, the thermal protector will activate and the projector may be turned off. In this case, please take the
  • NEC NP-P547UL | User Manual English - Page 169
    9. Appendix 9-10. Setting the date and time in the projector Set the current date and time and daylight saving time in the projector. When set, the date and time appear in the upper right corner of the MultiPresenter start-up screen. There are 2 ways of displaying the screen for [DATE AND TIME
  • NEC NP-P547UL | User Manual English - Page 170
    9. Appendix Important: • When a period of about one or more months has passed after disconnecting the power cord of the projector, the time will be initialized and the clock function will stop. When initialized, the date becomes [01/01/2018] and the time becomes [00:00]. If the clock function has
  • NEC NP-P547UL | User Manual English - Page 171
    service personnel, check the following list to be sure repairs are needed also by referring to the"Troubleshooting"section in your user's manual. This checklist below will help us solve your problem . □ Input source's resolution and frequency are supported by the projector. □ Image is too dark
  • NEC NP-P547UL | User Manual English - Page 172
    In the space below please describe your problem in detail. 9. Appendix Information on application and resolution: Refresh rate: Video adapter: Other: PC Projector DVD player Signal cable NEC standard or other manufacturer's cable? Model number: Length: inch/m Distribution amplifier
  • NEC NP-P547UL | User Manual English - Page 173
    .us, click on support center/register product and submit your completed form online. Upon receipt, we will send a confirmation letter with all the details you will need to take advantage of fast, reliable warranty and service programs from the industry leader, Sharp NEC Display Solutions of America
  • NEC NP-P547UL | User Manual English - Page 174
    © Sharp NEC Display Solutions, Ltd. 2022
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
Projector
P627UL/P547UL
User’s Manual
Model No.
NP-P627UL/NP-P547UL