NEC NP-PA1705UL-W Installation Manual

NEC NP-PA1705UL-W Manual

Get NEC NP-PA1705UL-W PDF manuals and user guides View all NEC NP-PA1705UL-W manuals
Add to My Manuals
Save this manual to your list of manuals

NEC NP-PA1705UL-W manual content summary:

  • NEC NP-PA1705UL-W | Installation Manual - Page 1
    Projector PA1705UL-W/PA1705UL-B PA1505UL-W/PA1505UL-B Installation Manual Model No. NP-PA1705UL-W/NP-PA1705UL-B/NP-PA1505UL-W/NP-PA1505UL-B
  • NEC NP-PA1705UL-W | Installation Manual - Page 2
    Table of Contents Introduction ... iv Important Information ... v 1. Check the product overview, supplied items and part names 1 1-1. Introduction to the Projector ...1 1-2. What's in the Box? ...4 1-3. Part Names of the Projector ...5 1-4. Part Names of the Remote Control 11 2. Projecting an
  • NEC NP-PA1705UL-W | Installation Manual - Page 3
    Table of Contents 4. Multi-Screen Projection ...61 4-1. Things that can be done using multi-screen projection 61 4-2. Using a single projector to project two types of videos at the same time [PIP/ PICTURE BY PICTURE] ... 62 4-3. Line up multiple projectors to display a high resolution image in a
  • NEC NP-PA1705UL-W | Installation Manual - Page 4
    and signal names of main connectors 174 9-6. Changing the Background Logo (Virtual Remote Tool 176 9-7. Portrait projection (vertical orientation 177 9-8. Troubleshooting ...179 9-9. PC Control Codes and Cable Connection 185 9-10. About the ASCII Control Command 187 9-11. List of Art-Net DMX
  • NEC NP-PA1705UL-W | Installation Manual - Page 5
    . This projector can be connected to computers, video devices, etc. to project images sharply onto a screen. Please read this manual carefully before using your projector. Read this manual if you have any doubts about operation or if you believe the projector may be faulty. NOTES (1) The contents of
  • NEC NP-PA1705UL-W | Installation Manual - Page 6
    as well as damage to property. The symbols and their meanings are described below. Be sure to understand them thoroughly before reading this manual. WARNING Failing to heed this symbol and handling the product erroneously could result in accidents leading to death or major injury. CAUTION Failing
  • NEC NP-PA1705UL-W | Installation Manual - Page 7
    Safety Cautions Important Information WARNING Projected light PROHIBITED Projected light and the pictogram/label indicated on the cabinet • Do not look into the projector's lens. Strong light that could damage your vision is projected when the projector is operating. Laser energy exposure near
  • NEC NP-PA1705UL-W | Installation Manual - Page 8
    WARNING • The following labels are stuck on the projector. Label 1 Laser explanatory label This product complies with EN 50689:2021 except using the lens of NP55ZL and NP56ZL. Important Information Label 1 Label 4 Label 2 Label 2 Label 3 FDA certification label FDA additional warning label
  • NEC NP-PA1705UL-W | Installation Manual - Page 9
    Important Information WARNING • This projector is classified as either IEC/EN 62471-5:2015 risk group 2 or risk group 3 depending on the lens unit. When classified as risk group 3, this projector is intended for professional use and must be installed by professional installer to ensure safety. See
  • NEC NP-PA1705UL-W | Installation Manual - Page 10
    Important Information WARNING HAZARDOUS VOLTAGE • Handle the power cord with care. Damaging the cord could lead to fire or electric shock. - Do not place heavy objects on the cord. - Do not place the cord under the projector. - Do not cover the cord with a rug, etc. - Do not scratch or modify the
  • NEC NP-PA1705UL-W | Installation Manual - Page 11
    Important Information CAUTION REQUIRED WARNING Installing suspended from the ceiling • Consult your dealer for installing the projector on the ceiling. Special skills are required for ceiling installation. DO NOT perform installation work by people other than installers. Doing so may result in the
  • NEC NP-PA1705UL-W | Installation Manual - Page 12
    laser light leakage, resulting in serious damage to your eyesight or burns. Have qualified service personnel perform inspection, adjustments and repairs of the interior. Do not place objects control in nuclear facility, medical life support system, and missile launch control in a weapon system. xi
  • NEC NP-PA1705UL-W | Installation Manual - Page 13
    Important Information CAUTION Power cord REQUIRED Handling the power cord • The projector should be installed close to an easily accessible power outlet. • When connecting the power cord to the projector's AC IN terminal, make sure the connector is fully and firmly inserted. Be sure to fix the
  • NEC NP-PA1705UL-W | Installation Manual - Page 14
    Important Information CAUTION Installation REQUIRED Securing the lens unit with the fall prevention wire • If the projector is going to be suspended from a ceiling or another high place, secure the lens unit using the fall prevention wire (sold separately). If the lens unit is not secured, it
  • NEC NP-PA1705UL-W | Installation Manual - Page 15
    Important Information CAUTION PROHIBITED PROHIBITED CAUTION FOR HIGH TEMPERATURE Handling batteries Incorrect usage of batteries can result in leaks or bursting. • Use the specified batteries only. • Insert batteries matching the (+) and (-) signs on each battery to the (+) and (-) signs of the
  • NEC NP-PA1705UL-W | Installation Manual - Page 16
    Important Information CAUTION PROHIBITED Moving the projector • When carrying the projector, remove the lens unit and carry it with at least two people. Attempting to move the projector alone could result in back pain or other injuries. • When carrying the projector with the lens unit removed, do
  • NEC NP-PA1705UL-W | Installation Manual - Page 17
    multiple laser diodes is equipped in the product as the light source. • These laser diodes are sealed in the light module. No maintenance or service is required for the performance of the light module. • End user is not allowed to replace the light module. • Contact qualified distributor for light
  • NEC NP-PA1705UL-W | Installation Manual - Page 18
    Important Information Risk groups This projector is classified as either IEC/EN 62471-5:2015 risk group 2 or risk group 3 depending on the lens unit. Risk group 2 (RG2) WARNING As with any bright light source, do not stare into the beam, RG2 IEC/EN 62471-5:2015. Risk group 3 (RG3) WARNING RG3
  • NEC NP-PA1705UL-W | Installation Manual - Page 19
    • Check before installing the projector ① Lens model name or throw ratio The lens model name and throw ratio are listed in the image below. b a: Lens model name Important Information b: Throw ratio a ② Combining lens units and risk groups Lens model name NP51ZL NP52ZL NP53ZL NP54ZL NP55ZL
  • NEC NP-PA1705UL-W | Installation Manual - Page 20
    Important Information • Hazard zone The below figure describes the radiation zone (hazard zone) of light emitted by the projector that is classified as Risk Group 3 (RG3) of IEC/EN 62471-5:2015. Overhead view Side view a H b HD a V HD b a: Screen / b: Hazard zone PA1705UL-W/PA1705UL-B Lens
  • NEC NP-PA1705UL-W | Installation Manual - Page 21
    Important Information • About the precautionary zone By providing a precautionary zone or physical barriers, it is possible to prevent human eyes from entering the hazard zone. When the manager of the projector (operator) cannot prevent spectators from entering the hazard zone such as in public
  • NEC NP-PA1705UL-W | Installation Manual - Page 22
    ③ Example of downward projection installed on the ceiling b c Important Information b d d c a: Screen / b: Hazard zone / c: Precautionary zone / d: floor CAUTION If the precautionary zone between the floor and the hazard zone cannot be secured, it is necessary to prevent spectators from
  • NEC NP-PA1705UL-W | Installation Manual - Page 23
    whenever the projector is powered on in case of an emergency. • Instruct the manager of the projector (operator) to keep the installation manual, user's manual and inspection records in an easy-to-reach place. • Instruct them to determine whether the projector conforms to the standards of each
  • NEC NP-PA1705UL-W | Installation Manual - Page 24
    those specified by Sharp NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • NEC NP-PA1705UL-W | Installation Manual - Page 25
    Important Information (For Customers in U.K.) IMPORTANT • The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: BLUE: BROWN: "Earth" "Neutral" "Live" • As the colours of the wires in the mains lead of this apparatus may not correspond with the
  • NEC NP-PA1705UL-W | Installation Manual - Page 26
    legislation. According the EU directive 2006/66/EC, the battery can't be disposed improperly. The battery shall be separated to collect by local service. (for Germany only) Machine Noise Information Regulation - 3. GPSGV, The highest sound pressure level is less than 70 dB (A) in accordance with EN
  • NEC NP-PA1705UL-W | Installation Manual - Page 27
    unit for an extended period of time. 2. When installing the projector on the ceiling, be sure to do so correctly in accordance with the installation manual for the Ceiling Mount Unit. Be sure to use the fixed metal fittings and to tighten the screws securely. 3. To prevent the projector from falling
  • NEC NP-PA1705UL-W | Installation Manual - Page 28
    handling, such as carrying the projector by the tilt feet or using it leaned against a wall, could lead to malfunction. • The projector does not support stack installation. Do not stack projectors directly on top of each other. Failure to do so may cause damage or failure. • Do not touch the
  • NEC NP-PA1705UL-W | Installation Manual - Page 29
    Important Information Precautions when installing the projector at an angle This projector can be installed universally in every angle. When installing the projector at the angles shown below, the separately sold option cover is required to be attached to the projector. For tilted installation of
  • NEC NP-PA1705UL-W | Installation Manual - Page 30
    Important Information The drawings below show the installation angle required to attach the option cover A and B respectively. • Both option cover A and B may need to be attached depending on the installation position of the projector. • Whether the option cover needs to be attached in the current
  • NEC NP-PA1705UL-W | Installation Manual - Page 31
    Installation angles required to attach the option cover B Important Information Option cover B 90° 0°-85° Option cover B must be attached 180° 0° 170°-265° Option cover B must be attached 270° NOTE: • The drawings show the image of installation angle as a reference. They are slightly
  • NEC NP-PA1705UL-W | Installation Manual - Page 32
    Important Information Clearance for Installing the Projector • When installing the projector, keep sufficient space around it, as described below. If not, the hot exhaust emitted from the projector may be taken back in. Also, make sure no wind from an air-conditioner hits the projector. The
  • NEC NP-PA1705UL-W | Installation Manual - Page 33
    Innovation Corp. • Art-Net™ Designed by and Copyright Artistic Licence Holdings Ltd. • Other product and company names mentioned in this user's manual may be the trademarks or registered trademarks of their respective holders. • Virtual Remote Tool uses WinI2C/DDC library, © Nicomsoft Ltd. xxxii
  • NEC NP-PA1705UL-W | Installation Manual - Page 34
    is equipped in the light module The laser light source has a long service life, so replacement, adjustment, and other maintenance should not be necessary for lenses selectable according to the place of installation This projector supports 6 types of optional lenses, providing a selection of lenses
  • NEC NP-PA1705UL-W | Installation Manual - Page 35
    image displayed before switching is held so that that the new image can be switched to without a break due to absence of a signal. • Supports wired LAN Equips the LAN and HDBaseT ports. Utilizing a wired LAN connected with these ports, it enables to control the projector by a computer. • Convenient
  • NEC NP-PA1705UL-W | Installation Manual - Page 36
    1. Check the product overview, supplied items and part names • [LIGHT MODE] and "Carbon Meter" display Three [LIGHT MODE] options can be selected according to the purpose of use. [LIGHT ADJUST] can also be used to reduce output power and control energy consumption. The energy-saving effect from that
  • NEC NP-PA1705UL-W | Installation Manual - Page 37
    AAA alkaline batteries (x2) Power cord stopper (24C10881) Plug type For USA For EU 7N080534 7N080032 • Important Infomation (TINS-0015VW01) • Quick Setup Guide (TINS-0016VW01) • Security Sticker (Use this sticker when security password is set on.) For USA and Canada only Limited warranty For
  • NEC NP-PA1705UL-W | Installation Manual - Page 38
    1. Check the product overview, supplied items and part names 1-3. Part Names of the Projector Front The lens is sold separately. The description below is for when the NP54ZL lens is mounted. 5 6 6 9 1 7 2 3 1. Exhaust vent Heated air is exhausted from here. 2. Controls The projector's power can be
  • NEC NP-PA1705UL-W | Installation Manual - Page 39
    Rear 1. Check the product overview, supplied items and part names 6 5 4 3 1 2 7 1. Exhaust vent Heated air is exhausted from here. 2. Intake vent Takes in outside air to cool the unit. 3. Security Bar Attach an anti-theft device. The security bar accepts security wires or chains up to 0.18 inch
  • NEC NP-PA1705UL-W | Installation Manual - Page 40
    Controls/Indicators 1. Check the product overview, supplied items and part names 2 345 11 12 13 1 6 8 9 7 10 1. (POWER) Button Switches between projector's power on and standby. When turning off the power (standby), pressing the button once will bring up a confirmation message on the
  • NEC NP-PA1705UL-W | Installation Manual - Page 41
    1. Check the product overview, supplied items and part names 2 345 11 12 13 1 6 8 9 7 10 9. ENTER Button Moves to the next menu when the onscreen menu is displayed. Confirms the item when the confirmation message is displayed. 10. EXIT Button Returns to the menu on the previous level when
  • NEC NP-PA1705UL-W | Installation Manual - Page 42
    Terminal Panel Features 4 1 1. Check the product overview, supplied items and part names 25 3 7 8 9 10 6 1. HDMI 1 IN Terminal (Type A) Connects to the output terminals of a computer, blu-ray player, etc. 2. HDMI 2 IN Terminal (Type A) Connects to the output terminals of a computer, blu-
  • NEC NP-PA1705UL-W | Installation Manual - Page 43
    cannot be performed. • When [HDBaseT] is selected in the [REMOTE SENSOR] and the projector is connected to a commercially-available transmission device that supports HDBaseT, remote control operations in infra-red cannot be carried out if transmission of remote control signals has been set up in the
  • NEC NP-PA1705UL-W | Installation Manual - Page 44
    1. Check the product overview, supplied items and part names 1-4. Part Names of the Remote Control 121 1. Infrared Transmitter Remote control signals are sent via infrared signal. Point the remote control at the remote control 3 4 receiver on the projector. 2. Remote Jack 5 Connect a
  • NEC NP-PA1705UL-W | Installation Manual - Page 45
    is displayed will reset the adjust- 30 32 ment values. 29 This only works for the items with DEFAULT dis- 31 played in the Operation Guide. 15. SHUTTER/OSD OPEN ( )/CLOSE ( ) Button Press the CLOSE button to turn off the light source and temporarily stop projection. Press the OPEN button to
  • NEC NP-PA1705UL-W | Installation Manual - Page 46
    1. Check the product overview, supplied items and part names 121 17. Geometric. Button Displays [GEOMETRIC CORRECTION] from the on-screen menu. Use it to adjust distortions in 3 4 projected images. 18. STATUS Button 5 Displays [USAGE TIME] of [INFO.] from the on- 6 7 screen menu. 19.
  • NEC NP-PA1705UL-W | Installation Manual - Page 47
    1. Check the product overview, supplied items and part names 121 30. ID SET Button Used to set the control ID when performing indi- vidual operations on multiple projectors using the 3 4 remote control. Also used to toggle the character keyboard when the character input screen is dis- 5
  • NEC NP-PA1705UL-W | Installation Manual - Page 48
    1. Check the product overview, supplied items and part names Battery Installation 1. Press the catch and remove the battery cover. 2 1 2. Install new ones (AAA). Ensure that you have the batteries' polarity (+/−) aligned correctly. 3. Slip the cover back over the batteries until it snaps into place.
  • NEC NP-PA1705UL-W | Installation Manual - Page 49
    1. Check the product overview, supplied items and part names Operating Range for Wireless Remote Control b a a b a a c d a d a a b a b a: 7 m/276" / b: 20 m/787" / c: Remote sensor on projector cabinet / d: Remote control • The projector will not respond if there are objects between the
  • NEC NP-PA1705UL-W | Installation Manual - Page 50
    1. Check the product overview, supplied items and part names Using the Remote Control in Wired Operation Connect one end of the remote cable to the REMOTE terminal and the other end to the remote jack on the remote control. REMOTE a a: Remote jack NOTE: • When a remote cable is inserted into the
  • NEC NP-PA1705UL-W | Installation Manual - Page 51
    2. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. 2-1. Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 19) Step 2 • Turning on the projector (→ page 22) Step 3 •
  • NEC NP-PA1705UL-W | Installation Manual - Page 52
    2. Projecting an Image (Basic Operation) 2-2. Connecting Your Computer/Connecting the Power Cord 1. Connect your computer to the projector. This section will show you a basic connection to a computer. Connect a commercially available HDMI cable between the computer's HDMI output connector and the
  • NEC NP-PA1705UL-W | Installation Manual - Page 53
    2. Projecting an Image (Basic Operation) HDMI 1 IN HDMI 2 IN a b Make sure that the prongs are fully inserted into both the AC IN and the wall outlet. To wall outlet a: Power cord (supplied) / b: HDMI cable (not supplied) • Use a Premium High Speed HDMI Cable. CAUTION: Parts of the projector
  • NEC NP-PA1705UL-W | Installation Manual - Page 54
    2. Projecting an Image (Basic Operation) Using the power cord stopper To prevent the power cord from accidently removing from the AC IN of the projector, use the power cord stopper. NOTE: • If you pull on the power supply cord while the connector is fixed, the main unit may fall down and be damaged
  • NEC NP-PA1705UL-W | Installation Manual - Page 55
    2-3. Turning on the Projector 2. Projecting an Image (Basic Operation) WARNING The projector produces a strong light. When turning on the power, operate from the side or rear of the projector (outside the hazard zone). Also, when turning on the power, make sure no one within the projection range
  • NEC NP-PA1705UL-W | Installation Manual - Page 56
    Performing Lens Calibration After mounting the separately available lens unit or replacing a lens unit, perform [LENS CALIBRATION] by holding to press ZOOM/L-CALIB. button on the cabinet over two seconds. Calibration corrects the adjustable zoom, shift, and focus range. If calibration is not
  • NEC NP-PA1705UL-W | Installation Manual - Page 57
    2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 30 menu languages. To select a menu language, follow these steps: 1. Use the or
  • NEC NP-PA1705UL-W | Installation Manual - Page 58
    2. Projecting an Image (Basic Operation) 2-4. Selecting a Source Selecting the computer or video source NOTE: • Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the INPUT button for 1 second or longer. The projector will search for
  • NEC NP-PA1705UL-W | Installation Manual - Page 59
    2. Projecting an Image (Basic Operation) Selecting Default Source You can set a source as the default source so that it will be displayed each time the projector is turned on. 1. Press the MENU button. The menu will be displayed. 2. Press the ▶ button to select [SETUP] and press the ▼ button or the
  • NEC NP-PA1705UL-W | Installation Manual - Page 60
    2. Projecting an Image (Basic Operation) 2-5. Adjusting the Picture Size and Position Use the lens shift, the adjustable tilt foot, the zoom and the focus to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity. Adjusting the projected image's vertical
  • NEC NP-PA1705UL-W | Installation Manual - Page 61
    2. Projecting an Image (Basic Operation) Adjusting the vertical position of a projected image (Lens shift) CAUTION • Perform the adjustment from behind or from the side of the projector. If adjustments are performed from the front, your eyes could be exposed to strong light and get injured. • Keep
  • NEC NP-PA1705UL-W | Installation Manual - Page 62
    2. Projecting an Image (Basic Operation) NOTE: • If the lens is shifted to the maximum in the diagonal direction, the screen peripheral area will be dark or shaded. TIP: • The figure below shows the lens shift adjustment range (projection method: Desktop/Front) of the NP54ZL lens unit. See page 165
  • NEC NP-PA1705UL-W | Installation Manual - Page 63
    2. Projecting an Image (Basic Operation) Focus Recommend to perform the focus adjustment after leaving the projector under the state the TEST PATTERN has been projected for over 30 minutes. Applicable lens: NP51ZL/NP52ZL/NP53ZL 1. Press the FOCUS button. The [LENS FOCUS] control screen will be
  • NEC NP-PA1705UL-W | Installation Manual - Page 64
    3. Press ▼ button to select the [PERIPHERY] on the on-screen menu, and then press either ◀ or ▶ button to align the focus of screen peripheral area. 2. Projecting an Image (Basic Operation) 4. Repeat steps 2 and 3 until the entire projection screen is in focus. Applicable lens: NP54ZL/NP55ZL/
  • NEC NP-PA1705UL-W | Installation Manual - Page 65
    2. Projecting an Image (Basic Operation) Zoom 1. Press ZOOM/L-CALIB. button. The [ZOOM] adjustment screen will be displayed on. * In another way, press the ZOOM button on the remote control. Press ◀▶ buttons to adjust zoom. 32
  • NEC NP-PA1705UL-W | Installation Manual - Page 66
    Adjusting the Tilt Foot 1. Turn the left and right tilt foot to adjust. The tilt foot lengthen and shorten when turned. Turn one of the tilt foot to adjust the image so that it is level. • The tilt foot can be lengthened by a maximum of 10 mm/0.4". • The tilt foot can be used to tilt the projector
  • NEC NP-PA1705UL-W | Installation Manual - Page 67
    2. Projecting an Image (Basic Operation) 2-6. Adjusting a picture and sound Adjusting the picture Display the on-screen menu and adjust the picture. (→ page 79) Turning Up or Down Volume Sound level from the AUDIO OUT terminal can be adjusted. Important: • Do not turn up the volume to the maximum
  • NEC NP-PA1705UL-W | Installation Manual - Page 68
    2-7. Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the STANDBY button on the remote control. The [POWER OFF / ARE YOU SURE ? / CARBON SAVINGS-SESSION 0.000[g-CO2]] message will appear. 2. Projecting an Image (Basic Operation) 2.
  • NEC NP-PA1705UL-W | Installation Manual - Page 69
    2. Projecting an Image (Basic Operation) 2-8. After Use 1. Unplug the power cord. ① Pull to an appropriate position while pushing down the knob of the power cord stopper. ② Press down the knob on the clamper to open the clamper and take out the power cord. a b c a: Clamper / b: Knob (power cord
  • NEC NP-PA1705UL-W | Installation Manual - Page 70
    3. Convenient Features 3-1. Turn off the light of the projector (SHUTTER) 1. Press the SHUTTER CLOSE ( ) button on the remote control. The light source will turn off temporarily. Press the SHUTTER OPEN ( ) button to allow the screen to become illuminated again. • You can set the projection light to
  • NEC NP-PA1705UL-W | Installation Manual - Page 71
    3. Convenient Features 3-3. Enlarging a Picture You can enlarge the picture up to four times. NOTE: • Depending on an input signal, the maximum magnification may be less than four times, or the function may be restricted. 1. Press and hold the CTL button and then press VOL./D-ZOOM (+) button on the
  • NEC NP-PA1705UL-W | Installation Manual - Page 72
    3. Convenient Features 3-4. Adjustment of luminance (brightness) Three [REF. LIGHT MODE] options can be selected according to the purpose of use. Brightness can be adjusted and controlled to maintain a constant brightness after adjustment. Function name Description Page REF. LIGHT MODE The
  • NEC NP-PA1705UL-W | Installation Manual - Page 73
    Display the [LIGHT MODE] screen 1. Press LIGHT button on the remote control. When [STANDARD] is selected for [MODE] 3. Convenient Features X The [REF. LIGHT MODE] screen will be displayed. When [PROFESSIONAL] is selected for [MODE] The [LIGHT MODE] screen will be displayed. Perform [LIGHT ADJUST]
  • NEC NP-PA1705UL-W | Installation Manual - Page 74
    3. Convenient Features Change [REF. LIGHT MODE] 1. With the cursor adjusted to [REF. LIGHT MODE], press the ENTER button. The [REF. LIGHT MODE] selection screen will be displayed. 2. Use the ▼▲ buttons to make a selection, and press the ENTER button. The display will return to the [REF. LIGHT MODE]
  • NEC NP-PA1705UL-W | Installation Manual - Page 75
    3. Convenient Features Checking Energy-Saving Effect [CARBON METER] This will display the energy-saving effect during the period of reduced projector light source as the amount of CO2 h emission reductions. This feature is called as [CARBON METER]. There are two messages: [TOTAL CARBON SAVINGS] and
  • NEC NP-PA1705UL-W | Installation Manual - Page 76
    3. Convenient Features 3-5. Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE] Use the [CORNERSTONE] feature to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right side of the screen longer or shorter so that the projected image is rectangular.
  • NEC NP-PA1705UL-W | Installation Manual - Page 77
    3. Convenient Features 5. Select [CORNERSTONE] and press the ENTER. Go back to display the [GEOMETRIC CORRECTION] screen of the on-screen menu. 6. Press the ▼ button to align with the [CORNERSTONE] and then press the ENTER button. The drawing shows the upper left icon ( ) is selected. The screen
  • NEC NP-PA1705UL-W | Installation Manual - Page 78
    3. Convenient Features 11. Use the button to select another icon which points in the direction. On the [CORNERSTONE] screen, select [EXIT] or press the EXIT button on the remote control. The confirmation screen is displayed. 12. Press the ◀ or ▶ button to highlight the [OK] and press the ENTER
  • NEC NP-PA1705UL-W | Installation Manual - Page 79
    3. Convenient Features 3-6. Operation for the On-Screen Menu by a commercially available USB mouse Once a commercially available USB mouse is connected to this projector, it enables to perform the operation for the on-screen menu and the geometric correction easily. NOTE: • Not guarantee the
  • NEC NP-PA1705UL-W | Installation Manual - Page 80
    3. Convenient Features Geometric correction The USB mouse can be used for [CORNERSTONE] CORRECTION, [HORIZONTAL CORNER], [VERTICAL CORNER], and [WARP]. In this clause, the [CORNERSTONE] CORRECTION by an USB mouse is explained as an example. 1. While the adjustment screen of the [COR- NERSTONE]
  • NEC NP-PA1705UL-W | Installation Manual - Page 81
    3. Convenient Features 3-7. Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword
  • NEC NP-PA1705UL-W | Installation Manual - Page 82
    3. Convenient Features 7. Type in the same combination of buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The [SECURITY] function has been enabled. To turn on the projector when [SECURITY] is enabled: 1. Press the POWER ON
  • NEC NP-PA1705UL-W | Installation Manual - Page 83
    3. Convenient Features To disable the [SECURITY] function: 1. Press the MENU button. The menu will be displayed. 2. Select [SETUP] → [CONTROL] → [SECURITY] and press the ENTER button. The [OFF]/[ON] menu will be displayed. 3. Select [OFF] and press the ENTER button. The [SECURITY KEYWORD] screen
  • NEC NP-PA1705UL-W | Installation Manual - Page 84
    the picture and projection screen, such as picture adjustment, geometric correction, edge blending, etc. is possible. • Network settings (smartphones are not supported) Configure the various settings when using the projector connected to a network (wired LAN). Also, it is possible to configure the
  • NEC NP-PA1705UL-W | Installation Manual - Page 85
    3. Convenient Features 4. Start up the web browser and enter the address or URL in the input field. Specify the address or URL as "http:///index.html". The HTTP server screen will be displayed. NOTE: • To use the projector in a network, consult with your network
  • NEC NP-PA1705UL-W | Installation Manual - Page 86
    automatically determined to display the computer screen or smartphone screen. You can also switch between the computer screen and the smartphone screen manually. • When switching the display from a computer to a smartphone Press the [SWITCH TO MOBILE] button at the top right of the screen. • When
  • NEC NP-PA1705UL-W | Installation Manual - Page 87
    3. Convenient Features 3-9. Storing Changes for Lens Shift, Zoom, and Focus [LENS MEMORY] This function serves to store the adjusted values when using the [LENS SHIFT], [ZOOM], and [FOCUS] functions of the projector. Adjusted values can be applied to the signal you selected. This will eliminate the
  • NEC NP-PA1705UL-W | Installation Manual - Page 88
    To store your adjusted values in [REF. LENS MEMORY]: 1. Press the MENU button. 3. Convenient Features The menu will be displayed. 2. Press the ▶ button to select [SETUP] and press the ENTER button. 3. Press the ▶ button to select [INSTALLATION(2)]. 55
  • NEC NP-PA1705UL-W | Installation Manual - Page 89
    3. Convenient Features 4. Press the ▼ button to select [REF. LENS MEMORY] and press the ENTER button. The [REF. LENS MEMORY] screen will be displayed. 5. Make sure [PROFILE] is highlighted, then press the ENTER button. The [PROFILE] selection screen appears. 6. Press the ▼/▲ buttons to select the [
  • NEC NP-PA1705UL-W | Installation Manual - Page 90
    3. Convenient Features 8. Press the ◀ button to select and [YES] and press the ENTER button. Select a [PROFILE] number and save the adjusted [LENS SHIFT], [ZOOM], and [FOCUS] values to it. 9. Press the MENU button. The menu will be closed. TIP: • To store adjusted values for each input source, use
  • NEC NP-PA1705UL-W | Installation Manual - Page 91
    To call up your adjusted values from [REF. LENS MEMORY]: 1. Press the MENU button. 3. Convenient Features The menu will be displayed. 2. Press the ▶ button to select [SETUP] and press the ENTER button. 3. Press the ▶ button to select [INSTALLATION(2)]. 4. Press the ▼ button to select [REF. LENS
  • NEC NP-PA1705UL-W | Installation Manual - Page 92
    3. Convenient Features 5. Make sure [PROFILE] is highlighted, then press the ENTER button. The [PROFILE] selection screen appears. 6. Press the ▼/▲ buttons to select the [PROFILE] number, then press the ENTER button. Return to the [REF. LENS MEMORY] settings screen. 7. Select [MOVE] and press the
  • NEC NP-PA1705UL-W | Installation Manual - Page 93
    3. Convenient Features TIP: To call up the stored values from [LENS MEMORY]: 1. From the menu, select [ADJUST] → [LENS MEMORY] → [MOVE] and press the ENTER button. The confirmation screen will be displayed. 2. Press the ◀ button to select and [YES] and press the ENTER button. During projection, if
  • NEC NP-PA1705UL-W | Installation Manual - Page 94
    4. Multi-Screen Projection This projector can be used singly or arranged in multiple units for multi-screen projection. 4-1. Things that can be done using multi-screen projection Case 1. Using a single projector to project two types of videos [PIP/PICTURE BY PICTURE] Connection example and
  • NEC NP-PA1705UL-W | Installation Manual - Page 95
    main screen and sub-screen. The main screen and sub-screen can provide the following input terminals. • The main display and sub-display support computer signals up to WUXGA@60HzRB. Main Display HDMI1 HDMI2 HDBaseT SDI Sub-Display or additional display HDMI1 HDMI2 HDBaseT SDI No Yes Yes
  • NEC NP-PA1705UL-W | Installation Manual - Page 96
    one more time and select [OFF] in the [SUB INPUT] screen of the Step 3. TIP: • During dual-screen projection, if the selected input is not supported by the sub-screen, the sub-screen will appear as a black screen. 63
  • NEC NP-PA1705UL-W | Installation Manual - Page 97
    4. Multi-Screen Projection Switching the main display with the sub-display and vice versa 1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PIP/PIC- TURE BY PICTURE]. This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu. 2. Select [PICTURE SWAP] using
  • NEC NP-PA1705UL-W | Installation Manual - Page 98
    4. Multi-Screen Projection Restrictions • The following operations are enabled only for the main display. - Audio-visual adjustments - Video magnification / compression using the partial VOL./D-ZOOM (+)(−) buttons. However, magnification / compression is up to the positions set in [PICTURE BY
  • NEC NP-PA1705UL-W | Installation Manual - Page 99
    control ID to each projector. • Set the"Color setting"and"DeepColor setting"on your Blu-ray player or computer to"Auto". Refer to the owner's manual accompanied with your Blu-ray player or computer for more information. • Connect an HDMI output of your Blu-ray player or computer to the first
  • NEC NP-PA1705UL-W | Installation Manual - Page 100
    Setting [TILING] 1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PICTURE SETTING] → [MODE]. This displays the [MODE] screen. 4. Multi-Screen Projection 2. Select [TILING] using the ▼/▲ buttons, and press the ENTER button. The display returns to the [PICTURE SETTING]
  • NEC NP-PA1705UL-W | Installation Manual - Page 101
    4. Multi-Screen Projection 4-4. Adjust boundaries of a projected image [EDGE BLENDING] This projector is equipped with an "[EDGE BLENDING] Function" that makes the edges (boundaries) of the projection screen indistinguishable. NOTE: • Before performing the Edge Blending function, place the
  • NEC NP-PA1705UL-W | Installation Manual - Page 102
    4. Multi-Screen Projection Setting the overlap of projection screens ① Enable [EDGE BLENDING]. 1. Press the MENU button. The menu will be displayed. 2. Select [DISPLAY] → [EDGE BLENDING]. The [EDGE BLENDING] screen will be displayed. Align the cursor with [MODE] and then press the ENTER button. The
  • NEC NP-PA1705UL-W | Installation Manual - Page 103
    4. Multi-Screen Projection 4. Select an appropriate item from [TOP], [BOTTOM], [LEFT], and [RIGHT] for an area of overlapped edges, and turn on [CONTROL]. [TOP]: [OFF] [LEFT]: [OFF] [RIGHT]: [ON] [BOTTOM]: [ON] [TOP]: [ON] [LEFT]: [OFF] [RIGHT]: [ON] [BOTTOM]: [OFF] [TOP]: [OFF] [LEFT]: [
  • NEC NP-PA1705UL-W | Installation Manual - Page 104
    4. Multi-Screen Projection ② Adjust [POSITION] and [RANGE] to determine an area of overlapped edges of images projected from each projector. When [MARKER] is set to [ON], markers of four colors are displayed on the screen. The cyan and green markers represent the edges of the region where images
  • NEC NP-PA1705UL-W | Installation Manual - Page 105
    4. Multi-Screen Projection Fit the edge of the overlapping area to the edge of the image with [POSITION], then adjust the overlapping area (width) with [RANGE]. In the case of the figure on the previous page, first set the cyan marker to the edge of the image on the left screen and the green marker
  • NEC NP-PA1705UL-W | Installation Manual - Page 106
    2. Select one option among nine by ▲ or ▼. 4. Multi-Screen Projection Black Level Adjustment This adjusts the black level of the overlapping area and the non-overlapping area of the multi-screen (EDGE BLENDING). Adjust the brightness level if you feel the difference is too large. NOTE: •
  • NEC NP-PA1705UL-W | Installation Manual - Page 107
    4. Multi-Screen Projection 2. Use the or ▲ button to select an item and use the ◀ or ▶ to adjust the black level. Do this for the other projector if necessary. TIP: • The number of black level division screens changes depending on the number of edge blending positions selected (top, bottom, right,
  • NEC NP-PA1705UL-W | Installation Manual - Page 108
    4. Multi-Screen Projection Adjust using a computer or smartphone [EDGE BLENDING] can be easily done using a computer or smartphone connected to the projectors via a network. Connect to the HTTP server (→ page 51) and display the [EDGE BLENDING] tab. Screen for computer Screen for smartphone The
  • NEC NP-PA1705UL-W | Installation Manual - Page 109
    5. Using On-Screen Menu 5-1. Using the Menus NOTE: • The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: • The commands such as ENTER, EXIT in the
  • NEC NP-PA1705UL-W | Installation Manual - Page 110
    mode Off Timer remaining time Key Lock symbol Menu windows or dialog boxes typically have the following elements: Highlight Solid triangle Tab Operation Guide Radio button Source Menu mode Off Timer remaining time Slide bar REF. LIGHT MODE symbol Key Lock symbol Thermometer symbol Indicates the
  • NEC NP-PA1705UL-W | Installation Manual - Page 111
    screen Highlight the item for text input and press the ENTER button to bring up the character input screen. a b c a: Text box / b: Highlight / c: Operation Guide 1. Press the buttons to highlight a character and then press the ENTER button. The character will be entered. Do the following for non
  • NEC NP-PA1705UL-W | Installation Manual - Page 112
    5. Using On-Screen Menu 5-3. List of Menu Items • Some menu items are not available depending on the input source. • [BASIC] menu items are indicated by shaded area. INPUT ADJUST HDMI1 HDMI2 HDBaseT SDI ENTRY LIST TEST PATTERN PICTURE Menu Item MODE PRESET DETAIL SETTINGS CONTRAST BRIGHTNESS
  • NEC NP-PA1705UL-W | Installation Manual - Page 113
    ADJUST IMAGE OPTIONS Menu Item HORIZONTAL VERTICAL BLANKING OVERSCAN ASPECT RATIO DISPLAY VIDEO LENS MEMORY PIP/PICTURE BY PICTURE NOISE REDUCTION DEINTERLACE SIGNAL TYPE VIDEO LEVEL HDR MODE*5 STORE MOVE RESET LOAD BY SIGNAL FORCED MUTE SUB INPUT MODE PICTURE SWAP PIP SETTING GEOMETRIC
  • NEC NP-PA1705UL-W | Installation Manual - Page 114
    NORSK, TÜRKÇE ROMÂNĂ, HRVATSKA INDONESIA Tiếng Việt COLOR COLOR, MONOCHROME 10 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 ON OFF, ON ON OFF, ON ON OFF, ON AUTO 45 SEC MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC 81
  • NEC NP-PA1705UL-W | Installation Manual - Page 115
    Menu Item SETUP MENU(2) MENU ANGLE MENU POSITION INSTALLATION(1) ORIENTATION SCREEN WALL COLOR SCREEN TYPE POSITION INSTALLATION(2) REF. LIGHT MODE REF. WHITE BALANCE STATIC CONVERGENCE SLEEP AUDIO OUT SHUTTER SETTINGS REF. LENS MEMORY LENS POSITION LENS CALIBRATION LENS MOVE AMOUNT COLOR
  • NEC NP-PA1705UL-W | Installation Manual - Page 116
    5. Using On-Screen Menu Menu Item Default Options SETUP CONTROL TOOLS ADMINISTRATOR MENU MODE MODE NOT SAVE SETTING VALUES ADVANCED ADVANCED, BASIC OFF OFF, ON NEW PASSWORD CONFIRM PASSWORD PROGRAM TIMER ENABLE SETTINGS EDIT ACTIVE OFF OFF, ON DAY TIME FUNCTION ADVANCED SETTINGS
  • NEC NP-PA1705UL-W | Installation Manual - Page 117
    5. Using On-Screen Menu Menu Item Default Options SETUP NETWORK NETWORK SERVICES HTTP SERVER SETTINGS SERVICE PJLink NEW PASSWORD ON OFF, ON, AUTH. CONFIRM PASSWORD CLASS CLASS1, CLASS2 DESTINATION AMX BEACON OFF OFF, ON CRESTRON ROOMVIEW OFF OFF, ON CRESTRON CONTROL (
  • NEC NP-PA1705UL-W | Installation Manual - Page 118
    Menu Item INFO. USAGE TIME LIGHT HOURS USED PROJECTOR HOURS USED TOTAL CARBON SAVINGS SOURCE(1) INPUT TERMINAL RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY SYNC POLARITY SCAN TYPE SOURCE NAME ENTRY NO. SOURCE(2) SIGNAL TYPE BIT DEPTH VIDEO LEVEL SAMPLING FREQUENCY SOURCE(3)
  • NEC NP-PA1705UL-W | Installation Manual - Page 119
    Menu Item INFO. HDBaseT SIGNAL QUALITY OPERATION MODE LINK STATUS HDMI STATUS Art-Net(1) Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 Ch8 Ch9 Art-Net(2) Ch10 Ch11 Ch12 5. Using On-Screen Menu Default Options 86
  • NEC NP-PA1705UL-W | Installation Manual - Page 120
    5. Using On-Screen Menu 5-4. Menu Descriptions & Functions [INPUT] HDMI1 This projects the video of the device connected to the HDMI 1 IN terminal. HDMI2 This projects the video of the device connected to the HDMI 2 IN terminal. HDBaseT Projects the video of the device connected to the HDBaseT IN
  • NEC NP-PA1705UL-W | Installation Manual - Page 121
    5. Using On-Screen Menu Using the Entry List When any source adjustments are made, the adjustments are automatically registered in the Entry List. The (adjustment values of ) registered signals can be loaded from the Entry List whenever necessary. However, only up to 100 patterns can be registered
  • NEC NP-PA1705UL-W | Installation Manual - Page 122
    5. Using On-Screen Menu Calling up a signal from the Entry List [ (LOAD)] 1. Press the ▲ or ▼ button to select a signal and press the ENTER button. Editing a signal from the Entry List [ (EDIT)] 1. Press the ▲ or ▼ button to select a signal you wish to edit. 2. Press the or ▼ button to select [ (
  • NEC NP-PA1705UL-W | Installation Manual - Page 123
    5. Using On-Screen Menu Cutting a signal from the Entry List [ (CUT)] 1. Press the ▲ or ▼ button to select a signal you wish to delete. 2. Press the or ▼ button to select [ (CUT)] and press the ENTER button. The signal will be deleted from the Entry List and the deleted signal will be displayed on
  • NEC NP-PA1705UL-W | Installation Manual - Page 124
    5. Using On-Screen Menu 5-5. Menu Descriptions & Functions [ADJUST] [PICTURE] [MODE] This function allows you to determine how to save settings for [DETAIL SETTINGS] of [PRESET] for each input. STANDARD PROFESSIONAL Saves settings for each item of [PRESET] (Preset 1 through 7) Saves all the
  • NEC NP-PA1705UL-W | Installation Manual - Page 125
    5. Using On-Screen Menu [DETAIL SETTINGS] [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 7]. First, select a base preset mode from [REFERENCE], then set [GAMMA SETTING] and [COLOR TEMPERATURE]. HIGH-
  • NEC NP-PA1705UL-W | Installation Manual - Page 126
    5. Using On-Screen Menu Adjusting Brightness and Contrast [DYNAMIC CONTRAST] When set, the most optimal contrast ratio is adjusted according to the video. OFF MOTION IMAGE STILL IMAGE Dynamic contrast is disabled. Most optimal settings for moving images. Most optimal settings for static images.
  • NEC NP-PA1705UL-W | Installation Manual - Page 127
    5. Using On-Screen Menu Adjusting White Balance [WHITE BALANCE] This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level of the screen; Brightness for each color (RGB) is used to adjust the black level of the screen. [COLOR CORRECTION] Corrects the color
  • NEC NP-PA1705UL-W | Installation Manual - Page 128
    5. Using On-Screen Menu [CONTRAST] Adjusts the intensity of the image according to the incoming signal. [BRIGHTNESS] Adjusts the brightness level or the back raster intensity. [SHARPNESS] Controls the detail of the image. [COLOR] Increases or decreases the color saturation level. [HUE] Varies the
  • NEC NP-PA1705UL-W | Installation Manual - Page 129
    5. Using On-Screen Menu [IMAGE OPTIONS] Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. NOTE: • The adjustments for [HORIZONTAL] and [VERTICAL] will be stored in memory for the current signal. The next time you project the signal
  • NEC NP-PA1705UL-W | Installation Manual - Page 130
    Selecting Overscan Percentage [OVERSCAN] Select overscan percentage (Auto, 0%, 5% and 10%) for signal. Projected image 5. Using On-Screen Menu Overscaned by 10% NOTE: • The [OVERSCAN] item is not available: - when [NATIVE] is selected for [ASPECT RATIO]. Selecting the Aspect Ratio [ASPECT RATIO]
  • NEC NP-PA1705UL-W | Installation Manual - Page 131
    Options NATIVE 5. Using On-Screen Menu Function The projector displays the current image in its true resolution when the incoming signal has a lower or higher resolution than the projector's native resolution. (→ page 170) When the incoming signal has a higher resolution than the projector's native
  • NEC NP-PA1705UL-W | Installation Manual - Page 132
    5. Using On-Screen Menu [VIDEO] Using Noise Reduction [NOISE REDUCTION] When projecting a video image, you can use the [NOISE REDUCTION] function to reduce the screen noise (roughness and distortion). Depending on the noise level, the noise reduction effect can be set to [OFF], [LOW], [MEDIUM] or
  • NEC NP-PA1705UL-W | Installation Manual - Page 133
    [HDR MODE] AUTO OFF ON Automatically distinguishes HDR signal. Projects the image based on the input signal Projects the image conforming to the HDR signal 5. Using On-Screen Menu NOTE: • These options are available exclusively for 4K signal. Using the Lens Memory Function [LENS MEMORY] This
  • NEC NP-PA1705UL-W | Installation Manual - Page 134
    5. Using On-Screen Menu To store your adjusted values in [LENS MEMORY]: 1. Project the connected device signal you want to adjust. 2. Adjust the projecting image of position, size and focus by the SHIFT/HOME POSITION, ZOOM +/−, and FOCUS +/− buttons. • Adjustment can be performed by the remote
  • NEC NP-PA1705UL-W | Installation Manual - Page 135
    5. Using On-Screen Menu To automatically apply the adjusted values at the time of source selection: 1. From the menu, select [LOAD BY SIGNAL] and press the ENTER button. 2. Press the ▼ button to select and [ON] and press the ENTER button. This will move the lens automatically to the position at the
  • NEC NP-PA1705UL-W | Installation Manual - Page 136
    5. Using On-Screen Menu 5-6. Menu Descriptions & Functions [DISPLAY] [PIP/PICTURE BY PICTURE] SUB INPUT Select the input signal to be displayed in the sub-display. Please refer to"Using a single projector to project two types of videos at the same time [PIP/PICTURE BY PICTURE]" (→ page 62) for
  • NEC NP-PA1705UL-W | Installation Manual - Page 137
    5. Using On-Screen Menu BORDER Select the display boundary of the main display and sub-display of the [PICTURE BY PICTURE] screen. Sub-display Main display Sub-display Main display Main display Display boundary Sub-display TIP: • Seven options from zero to six are available. [GEOMETRIC
  • NEC NP-PA1705UL-W | Installation Manual - Page 138
    5. Using On-Screen Menu THROW RATIO Adjusts according to the projection ratio of the optional lens used. Lens unit Adjustment range NP51ZL 5 - 7 NP52ZL 6 - 9 NP53ZL 8 - 13 NP54ZL 12 - 21 NP55ZL 19 - 40 NP56ZL 39 - 75 * Adjustment ranges for NP51ZL, NP52ZL, and NP56ZL are provisional
  • NEC NP-PA1705UL-W | Installation Manual - Page 139
    5. Using On-Screen Menu CORNERSTONE Display the 4-point correction screen and adjust the trapezoidal distortion of the projection screen. Please refer to "Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]" (→ page 43) for details on the operation. HORIZONTAL CORNER/VERTICAL
  • NEC NP-PA1705UL-W | Installation Manual - Page 140
    5. Using On-Screen Menu 3. Press the buttons to adjust the corners or sides of the screen and then press the ENTER button. • The adjustment point will go back to being a cursor (yellow box). Explanation of screen transition • The adjustment points of the four corners (a, c, f and h in the drawing)
  • NEC NP-PA1705UL-W | Installation Manual - Page 141
    5. Using On-Screen Menu [Adjustment points of the [VERTICAL CORNER] screen and movement points of the projection screen] Point d will be displaced in a parallel manner at the same time as Points a, d, f b a c b a c d d f e e h g f h g Point e will be displaced in a parallel manner at
  • NEC NP-PA1705UL-W | Installation Manual - Page 142
    5. Using On-Screen Menu Adjustment method 1. Align the cursor with the [WARP] of the [GEOMETRIC CORRECTION] menu and the press the ENTER. • Adjustment screen will be displayed on. 2. Press the buttons to align the cursor (blue box) with the target adjustment point and then press the ENTER. • The
  • NEC NP-PA1705UL-W | Installation Manual - Page 143
    5. Using On-Screen Menu PC TOOL Recall the geometric correction data that is registered in the projector beforehand. Three types of correction data can be registered. In addition, recall the geometric correction data that is registered in the projector after adjusting with the ProAssist software
  • NEC NP-PA1705UL-W | Installation Manual - Page 144
    5. Using On-Screen Menu [EDGE BLENDING] This adjusts the edges (boundaries) of the projection screen when projecting high resolution videos using a combination of several projectors in the up, down, left and right positions. MODE This enables or disables the [EDGE BLENDING] function. When [MODE] is
  • NEC NP-PA1705UL-W | Installation Manual - Page 145
    5. Using On-Screen Menu [PICTURE SETTING] This sets the division conditions for reducing or enlarging the image area and displaying it in the desired position or for projecting using a combination of several projectors. Please refer to "Multi-Screen Projection" (→ page 61) for details. MODE ZOOM
  • NEC NP-PA1705UL-W | Installation Manual - Page 146
    control ID to each projector. • Set the "Color setting" and "DeepColor setting" on your Blu-ray player or computer to "Auto". Refer to the owner's manual accompanied with your Blu-ray player or computer for more information. Connect an HDMI output signal of your Blu-ray player or computer to the
  • NEC NP-PA1705UL-W | Installation Manual - Page 147
    Selecting Menu Language [LANGUAGE] You can choose one of 30 languages for on-screen instructions. NOTE: • Your setting will not be affected even when [RESET] is done from to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC
  • NEC NP-PA1705UL-W | Installation Manual - Page 148
    FRONT This automatically detects and projects the [DESKTOP FRONT] and [CEILING FRONT]. NOTE: • The [DESKTOP REAR] and [CEILING REAR] will not be detected. Please select manually. CEILING REAR 115
  • NEC NP-PA1705UL-W | Installation Manual - Page 149
    FRONT] is installed within ± 10 degrees for floor installation and whether the [CEILING FRONT] is within ±10 degrees for ceiling installation. Select manually when the projection screen is inverted. Selecting Aspect Ratio and Position for Screen [SCREEN] [SCREEN TYPE] Sets the aspect ratio of the
  • NEC NP-PA1705UL-W | Installation Manual - Page 150
    Using the Wall Color Correction [WALL COLOR] 5. Using On-Screen Menu This function allows for quick adaptive color correction in applications where the screen material is not white. NOTE: • Selecting [WHITEBOARD] reduces light source brightness. [REF. LIGHT MODE] Three [REF. LIGHT MODE] options
  • NEC NP-PA1705UL-W | Installation Manual - Page 151
    5. Using On-Screen Menu TIP: • Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode, sensors inside the projector detect brightness and automatically adjust the output, thereby maintaining a constant brightness throughout the life of the light module. However, if
  • NEC NP-PA1705UL-W | Installation Manual - Page 152
    5. Using On-Screen Menu [INSTALLATION(2)] [SHUTTER SETTINGS] Enabling and disabling the lens shutter function. POWER ON SHUTTER OPEN When the power is turned on, the light source comes on and the picture is projected. CLOSE The light source does not come on when the power is turned on. When
  • NEC NP-PA1705UL-W | Installation Manual - Page 153
    5. Using On-Screen Menu [LENS POSITION] Set back the lens to the home position. [LENS CALIBRATION] The adjustment range of the zoom, focus, and shift of the mounted lens is calibrated. Be sure to carry out [LENS CALIBRATION] after replacing the lens. [LENS MOVE AMOUNT] Select one of five options to
  • NEC NP-PA1705UL-W | Installation Manual - Page 154
    5. Using On-Screen Menu [CONTROL] TOOLS ADMINISTRATOR MODE This allows you to select [MENU MODE], save settings, and set a password for the administrator mode. MENU MODE NOT SAVE SETTING VALUES NEW PASSWORD, CONFIRM PASSWORD Select either [BASIC] or [ADVANCED] menu. (→ page 79) Placing a check
  • NEC NP-PA1705UL-W | Installation Manual - Page 155
    2. Select a blank program number and press the ENTER button. 5. Using On-Screen Menu The [ (EDIT)] screen will be displayed. 3. Make settings for each item as required. ACTIVE DAY TIME FUNCTION ADVANCED SETTINGS REPEAT Place a check mark to enable the program. Select days of the week for the
  • NEC NP-PA1705UL-W | Installation Manual - Page 156
    projector is turned on by using the program timer and if you want to turn off the projector, set the off-time or do it manually so as not to leave the projector on for a long period of time. Activating the program timer 1. Select [ENABLE] on the [PROGRAM TIMER] screen and
  • NEC NP-PA1705UL-W | Installation Manual - Page 157
    5. Using On-Screen Menu Editing the programmed settings 1. On the [PROGRAM LIST] screen, select a program you want to edit and press the ENTER button. 2. Change the settings on the [EDIT] screen. 3. Select [OK] and press the ENTER button. The programmed settings will be changed. You will be returned
  • NEC NP-PA1705UL-W | Installation Manual - Page 158
    5. Using On-Screen Menu DATE AND TIME SETTINGS You can set the current time, month, date, and year. NOTE: • The projector has a built-in clock. The clock will keep working for about a month after the main power is turned off. If the main power is off for a month or more, the built-in clock will
  • NEC NP-PA1705UL-W | Installation Manual - Page 159
    [CONTROL ID] setting. NOTE: • When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support the [CONTROL ID] function. (In this case the buttons on the projector cabinet can be used.) • Your setting will not be affected even when [RESET
  • NEC NP-PA1705UL-W | Installation Manual - Page 160
    Assigning or Changing the Control ID 1. Turn on the projector. 2. Press the ID SET button on the remote control. The [CONTROL ID] screen will be displayed. 5. Using On-Screen Menu If the projector can be operated with the current remote control ID, the [ACTIVE] will be displayed. If the projector
  • NEC NP-PA1705UL-W | Installation Manual - Page 161
    5. Using On-Screen Menu Turning On or Off Remote Sensor [REMOTE SENSOR] This option determines which remote sensor on the projector is enabled in wireless mode. The options are: [FRONT/BACK], [FRONT], [BACK], and [HDBaseT]. NOTE: • The remote control of the projector will not be able to receive
  • NEC NP-PA1705UL-W | Installation Manual - Page 162
    5. Using On-Screen Menu [NETWORK SETTINGS] Configure the various settings when using the projector connected to a network. Important: • Consult with your network administrator about these settings. • When using a wired LAN, connect the LAN cable to the LAN port on the projector. (→ page 158) •
  • NEC NP-PA1705UL-W | Installation Manual - Page 163
    5. Using On-Screen Menu WIRED LAN When you select [WIRED LAN] in the on-screen menu for the first time after purchasing the projector, the [NETWORK PASSWORD] setting screen will appear. Carry out the following Step (1) or Step (2). (1) When setting the network password (recommended) Refer to [
  • NEC NP-PA1705UL-W | Installation Manual - Page 164
    PROJECTOR NAME PROJECTOR NAME Set a unique projector name. DOMAIN Set a host name and domain name of the projector. HOST NAME Set a host name of the projector. DOMAIN NAME Set a domain name of the projector. 5. Using On-Screen Menu Up to 16 alphanumeric characters and symbols Up to 16
  • NEC NP-PA1705UL-W | Installation Manual - Page 165
    ] or [RECIPIENT'S ADDRESS 1-3] is selected, [TEST MAIL] is not available. • Be sure to highlight [OK] and press the ENTER button before executing [TEST MAIL]. [NETWORK SERVICE] If [PASSCODE] has been set, you cannot display the [NETWORK
  • NEC NP-PA1705UL-W | Installation Manual - Page 166
    [SERVICES] HTTP SERVER PJLink AMX BEACON CRESTRON 5. Using On-Screen Menu Configure from AMX Device Discovery when connecting to the - network supported by AMX's NetLinx control system. TIP: • When using a device that supports AMX Device Discovery, all AMX NetLinx control system will recognize
  • NEC NP-PA1705UL-W | Installation Manual - Page 167
    Extron XTP PC CONTROL AUTH. PC CONTROL Art-Net 5. Using On-Screen Menu Set for connecting this projector to the Extron XTP transmitter. - [ON] will enable to connect with the XTP transmitter. [OFF] will disable to connect with the XTP transmitter. Set the PC control function to on or off. -
  • NEC NP-PA1705UL-W | Installation Manual - Page 168
    Set the passcode for the network administrator. When the passcode is set, a confirmation screen is displayed when opening the [NETWORK SERVICE] screen of the on-screen menu and the [SERVICES] tab of the HTTP server, and the passcode must be input. Set the passcode using a combination of the buttons
  • NEC NP-PA1705UL-W | Installation Manual - Page 169
    5. Using On-Screen Menu [SOURCE OPTIONS] Selecting Default Source [DEFAULT INPUT SELECT] You can set the projector to default to any one of its inputs each time the projector is turned on. LAST AUTO HDMI1 HDMI2 HDBaseT SDI Sets the projector to default to the previous or last active input each
  • NEC NP-PA1705UL-W | Installation Manual - Page 170
    Menu [EDID VERSION] Switch the EDID version for the HDMI 1 IN and HDMI 2 IN terminals. MODE1 MODE2 Supports general signal Supports 4K signal Select this mode for displaying 4K image using the device supporting 4K NOTE: • If image and sound can not be output in [MODE2], switch to [MODE1]. [HDCP
  • NEC NP-PA1705UL-W | Installation Manual - Page 171
    5. Using On-Screen Menu [POWER OPTIONS] [POWER-SAVING] Select the standby mode: ON This setting is to keep the standby power consumption to the minimum necessary. The standby state changes automatically depending on the projector settings and the state and duration of connected devices (→ page
  • NEC NP-PA1705UL-W | Installation Manual - Page 172
    5. Using On-Screen Menu Turning On the Projector by Detecting Input Signal [AUTO POWER ON SELECT] Under the state of standby or sleep, the projector automatically detects and projects synchronizing signal input from the selected terminals among [HDMI1], [HDMI2], [HDBaseT] and [SDI] by this function
  • NEC NP-PA1705UL-W | Installation Manual - Page 173
    5. Using On-Screen Menu Returning to Factory Default [RESET] The [RESET] feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items
  • NEC NP-PA1705UL-W | Installation Manual - Page 174
    5-8. Menu Descriptions & Functions [INFO.] 5. Using On-Screen Menu [USAGE TIME] LIGHT HOURS USED (H) TOTAL CARBON SAVINGS [kg-CO2] PROJECTOR HOURS USED (H) • The value of [LIGHT HOURS USED] reflects the temperature of the operating environment and the [LIGHT MODE] setting in the actual operating
  • NEC NP-PA1705UL-W | Installation Manual - Page 175
    [VERSION] SOFTWARE 5. Using On-Screen Menu [OTHERS] DATE TIME MODEL NO. CONTROL ID* PROJECTOR NAME SERIAL NUMBER LENS ID * [CONTROL ID] will be displayed when [CONTROL ID] has been set up. [CONDITIONS] INTAKE TEMPERATURE ATMOSPHERIC PRESSURE X-AXIS Z-AXIS EXHAUST TEMPERATURE INSTALLATION
  • NEC NP-PA1705UL-W | Installation Manual - Page 176
    5. Using On-Screen Menu About [OPTION COVER] This is used to check whether the option cover (separately sold) needs to be attached when the projector is installed at an angle. - / - Option cover is not required A / - Only option cover A needs to be attached - / B Only option cover B needs to
  • NEC NP-PA1705UL-W | Installation Manual - Page 177
    6. Attachment/detachment of parts sold separately 6-1. Lens unit Six separate bayonet style lenses can be used with this projector. The descriptions here are for the NP54ZL lens. Mount other lenses in the same manner. After installing or replacing the lens unit, press the ZOOM/L-CALIB. button on the
  • NEC NP-PA1705UL-W | Installation Manual - Page 178
    6. Attachment/detachment of parts sold separately 2. Remove the lens cap on the back of the lens. NOTE: • Make sure to remove the lens cap at the unit back side. If the lens unit with the lens cap remaining on is installed on the projector, it may cause of malfunction. 3. Remove the lens cover. Pull
  • NEC NP-PA1705UL-W | Installation Manual - Page 179
    , insert the lens unit into the projector's lens hole. Align the position of the connector and gently insert it as far back as possible. c 6. While supporting the lens unit with your hand, press the left side of the lens lock lever towards the LOCK position until it stops. A clicking sound will
  • NEC NP-PA1705UL-W | Installation Manual - Page 180
    . 5. Wait until the projector cabinet is cool enough to handle. 1. Remove the lens cover. Pull the cover about 2 cm forward, then lift it up. 2. While supporting the lens unit with one hand, press the right side of the lens lock lever towards the UNLOCK position until it stops. NOTE: • Hold the
  • NEC NP-PA1705UL-W | Installation Manual - Page 181
    6. Attachment/detachment of parts sold separately 3. Gently pull the lens unit out from the projector. Once the lens unit has been removed, attach the rear lens cap included with the lens unit before storing. 4. Attach the lens cover to the projector. a (1) Leave a gap of about 2 cm when
  • NEC NP-PA1705UL-W | Installation Manual - Page 182
    6. Attachment/detachment of parts sold separately 6-2. Option cover Model name of option cover NP13CV-W for PA1705UL-W/PA1505UL-W NP13CV-B for PA1705UL-B/PA1505UL-B The option covers A and B are packaged with the option cover NP13CV-W and NP13CV-B. For the following cases, attach the separately sold
  • NEC NP-PA1705UL-W | Installation Manual - Page 183
    6. Attachment/detachment of parts sold separately • Option cover A Mounting 1. Remove the two corner caps from the pro- jector. • Keep the removed corner caps for future use. 2. Turn over the projector. CAUTION • For moving the projector, make sure you have at least two people. Attempting to move
  • NEC NP-PA1705UL-W | Installation Manual - Page 184
    option cover B by hand, turn the two screws clockwise to tighten them. • Tighten the screws securely. a: Screw hole Removing 1. Supporting option cover B by hand, turn the two screws counterclockwise to loosen them until they turn freely. • The screws are not removable. 2. Remove the option
  • NEC NP-PA1705UL-W | Installation Manual - Page 185
    7. Connecting to Other Equipment CAUTION • Be sure to turn off the projector before connecting the projector to an external device. If projected light enters your eyes, it may cause visual impairment. NOTE: • The connection cable is not enclosed with the projector. Please get ready a suitable cable
  • NEC NP-PA1705UL-W | Installation Manual - Page 186
    7. Connecting to Other Equipment 7-1. Connecting Your Computer • Connect a commercially available HDMI cable between the computer's HDMI output connector and the projector's HDMI 1 IN or HDMI 2 IN connector. HDMI 1 IN HDMI 2 IN b a a: HDMI cable (not supplied) / b: Speaker system • Select the
  • NEC NP-PA1705UL-W | Installation Manual - Page 187
    HDMI 1 IN or HDMI 2 IN connector of your projector. The SDI input terminal can also be used to connect to professional video devices, etc. It supports SD-SDI, HD-SDI, and 3G-SDI. c HDMI 1 IN HDMI 2 IN SDI IN AUDIO OUT a b a: HDMI cable (not supplied) (Use a Premium High Speed HDMI Cable
  • NEC NP-PA1705UL-W | Installation Manual - Page 188
    between"Enhanced"and"Normal". This will provide improved image contrast and more detailed dark areas. For more information on settings, refer to the instruction manual of the audio video equipment to be connected. • When connecting the HDMI 1 IN or HDMI 2 IN connector of the projector to the Blu
  • NEC NP-PA1705UL-W | Installation Manual - Page 189
    transmission device sold commercially. The HDBaseT IN port of the projector supports HDMI signals (HDCP) from transmission devices, control signals from external control signals (IR commands). • Refer to the owner's manual accompanied with your HDBaseT transmission for connecting with your external
  • NEC NP-PA1705UL-W | Installation Manual - Page 190
    project HDMI, HDBaseT image on several projectors connecting the HDBaseT IN port and the HDBaseT OUT port by LAN cable. The projectors support same brightness can be connected up to four units. HDBaseT OUT a HDBaseT IN b a: Master projector / b: Other projector NOTE: • When outputting HDMI signals
  • NEC NP-PA1705UL-W | Installation Manual - Page 191
    7. Connecting to Other Equipment 7-5. Connecting to a Wired LAN The projector comes standard with a LAN port which provides a LAN connection using a LAN cable. To use a LAN connection, you are required to set the LAN on the projector menu. Select [SETUP] → [NETWORK SETTINGS] → [WIRED LAN]. (→ page
  • NEC NP-PA1705UL-W | Installation Manual - Page 192
    8. Maintenance 8-1. Cleaning the Lens WARNING • Turn off the power, unplug the power plug from the socket and remove the lens for cleaning. If the unit turns on while cleaning the lens, the strong light from the lens could damage your eyes. It could also burn your fingers. • Please do not use a
  • NEC NP-PA1705UL-W | Installation Manual - Page 193
    8-2. Cleaning the Cabinet 8. Maintenance WARNING • Turn off the projector, and unplug the projector before cleaning. • Please do not use a spray containing flammable gas to remove dust attached to the cabinet. Doing so may result in fires. • Use a dry soft cloth to wipe dust off the cabinet. If
  • NEC NP-PA1705UL-W | Installation Manual - Page 194
    9. Appendix 9-1. Throw distance and screen size Six separate bayonet style lenses can be used on this projector. Refer to the information on this page and use a lens suited for the installation environment (screen size and throw distance). Projection range for the different lenses (Recommended
  • NEC NP-PA1705UL-W | Installation Manual - Page 195
    9. Appendix Lens types and throw distance (Aspect ratio 16:10) (Unit: inch) Screen size 60 80 100 120 150 200 240 300 400 500 Width × Height (inches) 51 × 32 68 × 42 85 × 53 102 × 64 127 × 79 170 × 106 204 × 127 254 × 159 339 × 212 424 × 265 NP51ZL 26 - 32 36 - 44 45 - 55 54 - 67 69 - 84 92 -
  • NEC NP-PA1705UL-W | Installation Manual - Page 196
    9. Appendix Lens types and throw distance (Aspect ratio 16:9) (Unit: inch) Screen size 60 80 100 120 150 200 240 300 400 500 Width × Height (inches) 52 × 29 70 × 39 87 × 49 105 × 59 131 × 74 174 × 98 209 × 118 261 × 147 349 × 196 436 × 245 NP51ZL 27 - 33 37 - 45 46 - 57 56 - 69 71 - 87 95 - 116
  • NEC NP-PA1705UL-W | Installation Manual - Page 197
    Calculation of the throw distance from the screen size L: Throw distance W: Screen width Lens model name NP51ZL NP52ZL NP53ZL NP54ZL NP55ZL NP56ZL Calculation formula (Zoom min to max) L = W × 0.5 to W × 0.7 L = W × 0.6 to W × 0.9 L = W × 0.9 to W × 1.3 L = W × 1.2 to W × 2.0 L = W × 2.0 to W ×
  • NEC NP-PA1705UL-W | Installation Manual - Page 198
    9. Appendix Lens shifting range This projector is equipped with a lens shift function for adjusting the position of the projected image by buttons. The lens can be shifted within the range shown below. • See page 28 for lens shift operations and precautions. Description of symbols: V indicates
  • NEC NP-PA1705UL-W | Installation Manual - Page 199
    9. Appendix Example: When projecting on a 16:10 150" screen using the NP54ZL lens: According to the "Lens types and throw distance (Aspect ratio 16:10)" (→ page 162), H (screen width) = 323.1 cm and V (screen height) = 201.9 cm Adjustment range in the vertical direction: Upper and lower directions
  • NEC NP-PA1705UL-W | Installation Manual - Page 200
    9. Appendix 9-2. Compatible Input Signal List HDMI Signal VGA SVGA XGA HD WXGA Quad-VGA SXGA FWXGA SXGA+ WXGA+ WXGA++ WSXGA+ UXGA Full HD WUXGA QXGA WQHD WQXGA UWFHD UHD Resolution ( dots ) 640 × 480 800 × 600 1024 × 768 1280 × 720 1280 × 768 1280 × 800 1280 × 960 1280 × 1024 1360 × 768 1366 ×
  • NEC NP-PA1705UL-W | Installation Manual - Page 201
    9. Appendix HDBaseT Signal VGA SVGA XGA HD WXGA Quad-VGA SXGA FWXGA SXGA+ WXGA+ WXGA++ WSXGA+ UXGA Full HD WUXGA QXGA WQHD WQXGA UWFHD Resolution ( dots ) 640 × 480 800 × 600 1024 × 768 1280 × 720 1280 × 768 1280 × 800 1280 × 960 1280 × 1024 1360 × 768 1366 × 768 1400 × 1050 1440 × 900 1600 × 900
  • NEC NP-PA1705UL-W | Installation Manual - Page 202
    9. Appendix *1 Native resolution *2 [BIT DEPTH] will not appear in the [INFO.] → [SOURCE(2)] menu during YCbCr4:2:2 usage. • With Advanced AccuBlend, the size of characters and ruled lines may be uneven and colors may be blurred. • Upon shipment, the projector is set for signals with standard
  • NEC NP-PA1705UL-W | Installation Manual - Page 203
    9-3. Specifications Model name Method Specifications of main parts Liquid crystal Size panel Pixels (*1) Projection lenses Zoom Focus Lens shifting Light source Optical device Light output (*2) Screen size (throw distance) Color reproducibility Scanning frequency Horizontal
  • NEC NP-PA1705UL-W | Installation Manual - Page 204
    Lip Sync. Audio: LPCM; up to 2 ch, sample rate 32/44.1/48 KHz, sample bit; 16/20/24-bit HDMI: Supports HDCP 2.2/1.4 HDBaseT: Supports HDCP 2.2/1.4 *5 The projector's protection functions will activate depending on the temperature of the operating environment. (→ page 41) • For additional information
  • NEC NP-PA1705UL-W | Installation Manual - Page 205
    be available on market after April 2024. The values for NP51ZL, NP52ZL, and NP56ZL on this manual are tentative, please contact your dealer about their detailed information or refer to the latest manual uploaded on our web site. Function Lens model name NP51ZL NP52ZL NP53ZL NP54ZL NP55ZL NP56ZL
  • NEC NP-PA1705UL-W | Installation Manual - Page 206
    9-4. Cabinet Dimensions Unit: mm (inch) 9. Appendix 490 (19.3) 238 (9.4) 230 (9.0) 142 (5.6) 599 (23.6) a a 540 (21.3) 300 (11.8) 150 (5.9) b 40 415 (16.3) 8 150 (5.9) 150 (5.9) 112 (4.4) M4 a: Lens center / b: 6 M4mm screw holes of 8mm depth 173
  • NEC NP-PA1705UL-W | Installation Manual - Page 207
    9-5. Pin assignments and signal names of main connectors HDMI 1 IN/HDMI 2 IN Connector (Type A) 2 4 6 8 10 12 14 16 18 1 3 5 7 9 11 13 15 17 19 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Signal TMDS Data 2+ TMDS Data 2 Shield TMDS Data 2− TMDS Data 1+ TMDS Data 1 Shield TMDS Data 1−
  • NEC NP-PA1705UL-W | Installation Manual - Page 208
    PC CONTROL Port (D-Sub 9 Pin) 9876 54321 Pin No. 1 2 3 4 5 6 7 8 9 Signal Unused RxD reception data TxD transmission data Unused Grounding Unused RTS transmission request CTS transmission allowed Unused 9. Appendix 175
  • NEC NP-PA1705UL-W | Installation Manual - Page 209
    9. Appendix 9-6. Changing the Background Logo (Virtual Remote Tool) This will help you perform operations such as projector's power on or off and signal selection via a LAN connection. It is also used to send an image to the projector and register it as the logo data of the projector. After
  • NEC NP-PA1705UL-W | Installation Manual - Page 210
    and the possibility of fire and malfunction occurring. • A stand for supporting the projector needs to be made for portrait projection and for installing and manufacturing conditions for the stand Please engage an installation service provider for the design and manufacture of the customized stand
  • NEC NP-PA1705UL-W | Installation Manual - Page 211
    9. Appendix Reference drawings * The drawing showing the dimensional requirements is not an actual stand design drawing. (Unit: mm) 262 150 150 c b a a 150 150 b d [Front View] [Side View] a: Intake air / b: Exhaust / c: Screw 6 - M4 / d: Horizontal adjuster ** The example shows the
  • NEC NP-PA1705UL-W | Installation Manual - Page 212
    9. Appendix 9-8. Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Feature of each indicator ① POWER indicator ② STATUS indicator ③ LIGHT indicator ④ TEMP. indicator Indicator Message (Status
  • NEC NP-PA1705UL-W | Installation Manual - Page 213
    9. Appendix POWER STATUS LIGHT Blue (Light) Off Green (Blink*3) TEMP. Off Projector status Powered state ([REF. LIGHT MODE] is [SILENT] or [LONG LIFE]) [LENS CALIBRATION] implement request. Status varies Orange (Blink*4) Status varies Off Performing the lens calibration Blue (Light)
  • NEC NP-PA1705UL-W | Installation Manual - Page 214
    and the remote control do not match. Temperature problem Off Orange Orange (Light) (Light) Temperature problem Off Off Off Red (Light) Status varies Red (Light) Orange (Blink*3) or (Blink*5) Lens mounting error Off Error requiring service support Status varies Red (Light) Status varies
  • NEC NP-PA1705UL-W | Installation Manual - Page 215
    9. Appendix When the thermal protector is activated: When inside temperature of the projector becomes too high or low, the POWER indicator start to red blink in a short cycle. After this happened, the thermal protector will activate and the projector may be turned off. In this case, please take the
  • NEC NP-PA1705UL-W | Installation Manual - Page 216
    179.) 9. Appendix Problem Does not turn on the projector again. • In case it's hard to think the trouble is not caused on the above mentioned conditions, unplug the power cord refer to the user guide accompanied with your computer or graphics card, or contact the support center for your computer
  • NEC NP-PA1705UL-W | Installation Manual - Page 217
    9. Appendix Problem Picture is blurred Image is scrolling vertically, horizontally or frequency. Make sure that the resolution you are trying to display is supported by the projector. (→ page 167) • Adjust the computer image manually with the Horizontal/Vertical in the [IMAGE OPTIONS]. (→ page 96
  • NEC NP-PA1705UL-W | Installation Manual - Page 218
    9. Appendix 9-9. PC Control Codes and Cable Connection PC Control Codes Function POWER ON POWER OFF INPUT SELECT HDMI1 INPUT SELECT HDMI2 INPUT SELECT HDBaseT INPUT SELECT SDI PICTURE MUTE ON PICTURE MUTE OFF SOUND MUTE ON SOUND MUTE OFF Code Data 02H 00H 00H 00H 00H 02H 02H 01H 00H 00H 00H 03H
  • NEC NP-PA1705UL-W | Installation Manual - Page 219
    PC Control Terminal (D-Sub 9P) To TxD of PC To RxD of PC To GND of PC 9. Appendix 12345 6789 To RTS of PC To CTS of PC NOTE: • Pins 1, 4, 6 and 9 are no used. • Jumper "Request to Send" and "Clear to Send" together on both ends of the cable to simplify cable connection. • For long cable runs it is
  • NEC NP-PA1705UL-W | Installation Manual - Page 220
    /4800 bps 8 bits No parity 1 bit None Full duplex 2. Connection via network Communication Protocol (Connection via LAN) Item Communication speed Supported standard Information Set automatically (10/100 Mbps) IEEE802.3 (10BASE-T) IEEE802.3u (100BASE-TX, Auto-Negotiation) Use the TCP port number
  • NEC NP-PA1705UL-W | Installation Manual - Page 221
    command error:temp error:fan error:light errorl:lens error:system Response hdmi1 or hdmi hdmi2 hdbaset or hdbaset1 sdi or sdi1 Temperature error Fan trouble Light source trouble Lens trouble System trouble Parameter Error Status 9. Appendix 188
  • NEC NP-PA1705UL-W | Installation Manual - Page 222
    9-11. List of Art-Net DMX parameters Function POWER INPUT BLANK SHUTTER FREEZE LIGHT ADJUST LENS SHIFT(H) LENS SHIFT(V) FOCUS ZOOM KEYSTONE(H) Behavior OFF No operation ON No operation HDMI1 No operation HDMI2 No operation HDBaseT No operation SDI No operation OFF No operation ON OPEN No operation
  • NEC NP-PA1705UL-W | Installation Manual - Page 223
    service personnel, check the following list to be sure repairs are needed also by referring to the"Troubleshooting"section in your user's manual. This checklist below will help us solve your problem . □ Input source's resolution and frequency are supported by the projector. □ Image is too dark
  • NEC NP-PA1705UL-W | Installation Manual - Page 224
    In the space below please describe your problem in detail. 9. Appendix Information on application and environment where your projector is used Projector Model number: Serial No.: Date of purchase: Light module operating time (
  • NEC NP-PA1705UL-W | Installation Manual - Page 225
    to register your new projector. This will activate your limited parts and labor warranty and InstaCare service program. Visit our web site at https://www.sharpnecdisplays.us, click on support center/register product and submit your completed form online. Upon receipt, we will send a confirmation
  • NEC NP-PA1705UL-W | Installation Manual - Page 226
    © Sharp NEC Display Solutions, Ltd. 2023
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
Projector
PA1705UL-W/PA1705UL-B
PA1505UL-W/PA1505UL-B
Installation Manual
Model No.
NP-PA1705UL-W/NP-PA1705UL-B/NP-PA1505UL-W/NP-PA1505UL-B