NEC NP-PA1705UL-W User Manual

NEC NP-PA1705UL-W Manual

Get NEC NP-PA1705UL-W PDF manuals and user guides View all NEC NP-PA1705UL-W manuals
Add to My Manuals
Save this manual to your list of manuals

NEC NP-PA1705UL-W manual content summary:

  • NEC NP-PA1705UL-W | User Manual - Page 1
    Projector PA1705UL-W/PA1705UL-B PA1505UL-W/PA1505UL-B User's Manual Model No. NP-PA1705UL-W/NP-PA1705UL-B/NP-PA1505UL-W/NP-PA1505UL-B
  • NEC NP-PA1705UL-W | User Manual - Page 2
    27 2-6. Adjusting a picture and sound ... 34 2-7. Turning off the Projector ... 35 2-8. After Use ... 36 3. Appendix ...37 3-1. Specifications ... 37 3-2. Troubleshooting ... 40 3-3. Mounting a lens (sold separately 46 REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and Mexico
  • NEC NP-PA1705UL-W | User Manual - Page 3
    you have any doubts about operation or if you believe the projector may be faulty. The Installation Manual provides detailed instructions on installation, adjustments, maintenance, etc., is posted on our website. https://www.sharp-nec-displays.com/dl/en/pj_manual/lineup.html NOTES (1) The contents
  • NEC NP-PA1705UL-W | User Manual - Page 4
    as well as damage to property. The symbols and their meanings are described below. Be sure to understand them thoroughly before reading this manual. WARNING Failing to heed this symbol and handling the product erroneously could result in accidents leading to death or major injury. CAUTION Failing
  • NEC NP-PA1705UL-W | User Manual - Page 5
    Safety Cautions Important Information WARNING Projected light PROHIBITED Projected light and the pictogram/label indicated on the cabinet • Do not look into the projector's lens. Strong light that could damage your vision is projected when the projector is operating. Laser energy exposure near
  • NEC NP-PA1705UL-W | User Manual - Page 6
    WARNING • The following labels are stuck on the projector. Label 1 Laser explanatory label This product complies with EN 50689:2021 except using the lens of NP55ZL and NP56ZL. Important Information Label 1 Label 4 Label 2 Label 2 Label 3 FDA certification label FDA additional warning label
  • NEC NP-PA1705UL-W | User Manual - Page 7
    Important Information WARNING • This projector is classified as either IEC/EN 62471-5:2015 risk group 2 or risk group 3 depending on the lens unit. When classified as risk group 3, this projector is intended for professional use and must be installed by professional installer to ensure safety. See
  • NEC NP-PA1705UL-W | User Manual - Page 8
    Important Information WARNING HAZARDOUS VOLTAGE • Handle the power cord with care. Damaging the cord could lead to fire or electric shock. - Do not place heavy objects on the cord. - Do not place the cord under the projector. - Do not cover the cord with a rug, etc. - Do not scratch or modify the
  • NEC NP-PA1705UL-W | User Manual - Page 9
    Important Information CAUTION REQUIRED WARNING Installing suspended from the ceiling • Consult your dealer for installing the projector on the ceiling. Special skills are required for ceiling installation. DO NOT perform installation work by people other than installers. Doing so may result in the
  • NEC NP-PA1705UL-W | User Manual - Page 10
    laser light leakage, resulting in serious damage to your eyesight or burns. Have qualified service personnel perform inspection, adjustments and repairs of the interior. Do not place objects control in nuclear facility, medical life support system, and missile launch control in a weapon system. ix
  • NEC NP-PA1705UL-W | User Manual - Page 11
    Important Information CAUTION Power cord REQUIRED Handling the power cord • The projector should be installed close to an easily accessible power outlet. • When connecting the power cord to the projector's AC IN terminal, make sure the connector is fully and firmly inserted. Be sure to fix the
  • NEC NP-PA1705UL-W | User Manual - Page 12
    Important Information CAUTION Installation REQUIRED Securing the lens unit with the fall prevention wire • If the projector is going to be suspended from a ceiling or another high place, secure the lens unit using the fall prevention wire (sold separately). If the lens unit is not secured, it
  • NEC NP-PA1705UL-W | User Manual - Page 13
    Important Information CAUTION PROHIBITED PROHIBITED CAUTION FOR HIGH TEMPERATURE Handling batteries Incorrect usage of batteries can result in leaks or bursting. • Use the specified batteries only. • Insert batteries matching the (+) and (-) signs on each battery to the (+) and (-) signs of the
  • NEC NP-PA1705UL-W | User Manual - Page 14
    Important Information CAUTION PROHIBITED Moving the projector • When carrying the projector, remove the lens unit and carry it with at least two people. Attempting to move the projector alone could result in back pain or other injuries. • When carrying the projector with the lens unit removed, do
  • NEC NP-PA1705UL-W | User Manual - Page 15
    multiple laser diodes is equipped in the product as the light source. • These laser diodes are sealed in the light module. No maintenance or service is required for the performance of the light module. • End user is not allowed to replace the light module. • Contact qualified distributor for light
  • NEC NP-PA1705UL-W | User Manual - Page 16
    Important Information Risk groups This projector is classified as either IEC/EN 62471-5:2015 risk group 2 or risk group 3 depending on the lens unit. Risk group 2 (RG2) WARNING As with any bright light source, do not stare into the beam, RG2 IEC/EN 62471-5:2015. Risk group 3 (RG3) WARNING RG3
  • NEC NP-PA1705UL-W | User Manual - Page 17
    • Check before installing the projector ① Lens model name or throw ratio The lens model name and throw ratio are listed in the image below. b a: Lens model name Important Information b: Throw ratio a ② Combining lens units and risk groups Lens model name NP51ZL NP52ZL NP53ZL NP54ZL NP55ZL
  • NEC NP-PA1705UL-W | User Manual - Page 18
    the throw ratio Throw ratio = L: Throw distance (m) / W: Screen width (m) For throw distances and screen widths, refer to "Lens types and throw distance" in the installation manual. xvii
  • NEC NP-PA1705UL-W | User Manual - Page 19
    Important Information • About the precautionary zone By providing a precautionary zone or physical barriers, it is possible to prevent human eyes from entering the hazard zone. When the manager of the projector (operator) cannot prevent spectators from entering the hazard zone such as in public
  • NEC NP-PA1705UL-W | User Manual - Page 20
    ③ Example of downward projection installed on the ceiling b c Important Information b d d c a: Screen / b: Hazard zone / c: Precautionary zone / d: floor CAUTION If the precautionary zone between the floor and the hazard zone cannot be secured, it is necessary to prevent spectators from
  • NEC NP-PA1705UL-W | User Manual - Page 21
    whenever the projector is powered on in case of an emergency. • Instruct the manager of the projector (operator) to keep the installation Manual, user's manual and inspection records in an easy-to-reach place. • Instruct them to determine whether the projector conforms to the standards of each
  • NEC NP-PA1705UL-W | User Manual - Page 22
    those specified by Sharp NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • NEC NP-PA1705UL-W | User Manual - Page 23
    Important Information (For Customers in U.K.) IMPORTANT • The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: BLUE: BROWN: "Earth" "Neutral" "Live" • As the colours of the wires in the mains lead of this apparatus may not correspond with the
  • NEC NP-PA1705UL-W | User Manual - Page 24
    legislation. According the EU directive 2006/66/EC, the battery can't be disposed improperly. The battery shall be separated to collect by local service. (for Germany only) Machine Noise Information Regulation - 3. GPSGV, The highest sound pressure level is less than 70 dB (A) in accordance with EN
  • NEC NP-PA1705UL-W | User Manual - Page 25
    unit for an extended period of time. 2. When installing the projector on the ceiling, be sure to do so correctly in accordance with the installation Manual for the Ceiling Mount Unit. Be sure to use the fixed metal fittings and to tighten the screws securely. 3. To prevent the projector from falling
  • NEC NP-PA1705UL-W | User Manual - Page 26
    or using it leaned against a wall, could lead to malfunction. • The projector does not support stack installation. Do not stack projectors directly on top of each other. Failure to do so Concerning to all maintenance operations, refer to Installation Manual and follow all instructions properly. xxv
  • NEC NP-PA1705UL-W | User Manual - Page 27
    Important Information Precautions when installing the projector at an angle This projector can be installed universally in every angle. When installing the projector at the angles shown below, the separately sold option cover is required to be attached to the projector. For tilted installation of
  • NEC NP-PA1705UL-W | User Manual - Page 28
    Important Information The drawings below show the installation angle required to attach the option cover A and B respectively. • Both option cover A and B may need to be attached depending on the installation position of the projector. • Whether the option cover needs to be attached in the current
  • NEC NP-PA1705UL-W | User Manual - Page 29
    Installation angles required to attach the option cover B Important Information Option cover B 90° 0°-85° Option cover B must be attached 180° 0° 170°-265° Option cover B must be attached 270° NOTE: • The drawings show the image of installation angle as a reference. They are slightly
  • NEC NP-PA1705UL-W | User Manual - Page 30
    Important Information Clearance for Installing the Projector • When installing the projector, keep sufficient space around it, as described below. If not, the hot exhaust emitted from the projector may be taken back in. Also, make sure no wind from an air-conditioner hits the projector. The
  • NEC NP-PA1705UL-W | User Manual - Page 31
    in the United States. • Art-Net™ Designed by and Copyright Artistic Licence Holdings Ltd. • Other product and company names mentioned in this user's manual may be the trademarks or registered trademarks of their respective holders. • Virtual Remote Tool uses WinI2C/DDC library, © Nicomsoft Ltd. xxx
  • NEC NP-PA1705UL-W | User Manual - Page 32
    is equipped in the light module The laser light source has a long service life, so replacement, adjustment, and other maintenance should not be necessary for lenses selectable according to the place of installation This projector supports 6 types of optional lenses, providing a selection of lenses
  • NEC NP-PA1705UL-W | User Manual - Page 33
    image displayed before switching is held so that that the new image can be switched to without a break due to absence of a signal. • Supports wired LAN Equips the LAN and HDBaseT ports. Utilizing a wired LAN connected with these ports, it enables to control the projector by a computer. • Convenient
  • NEC NP-PA1705UL-W | User Manual - Page 34
    1. Check the product overview, supplied items and part names • [LIGHT MODE] and "Carbon Meter" display Three [LIGHT MODE] options can be selected according to the purpose of use. [LIGHT ADJUST] can also be used to reduce output power and control energy consumption. The energy-saving effect from that
  • NEC NP-PA1705UL-W | User Manual - Page 35
    AAA alkaline batteries (x2) Power cord stopper (24C10881) Plug type For USA For EU 7N080534 7N080032 • Important Infomation (TINS-0015VW01) • Quick Setup Guide (TINS-0016VW01) • Security Sticker (Use this sticker when security password is set on.) For USA and Canada only Limited warranty For
  • NEC NP-PA1705UL-W | User Manual - Page 36
    1. Check the product overview, supplied items and part names 1-3. Part Names of the Projector Front The lens is sold separately. The description below is for when the NP54ZL lens is mounted. 5 6 6 9 1 7 2 3 1. Exhaust vent Heated air is exhausted from here. 2. Controls The projector's power can be
  • NEC NP-PA1705UL-W | User Manual - Page 37
    Rear 1. Check the product overview, supplied items and part names 6 5 4 3 1 2 7 1. Exhaust vent Heated air is exhausted from here. 2. Intake vent Takes in outside air to cool the unit. 3. Security Bar Attach an anti-theft device. The security bar accepts security wires or chains up to 0.18 inch
  • NEC NP-PA1705UL-W | User Manual - Page 38
    Controls/Indicators 1. Check the product overview, supplied items and part names 2 345 11 12 13 1 6 8 9 7 10 1. (POWER) Button Switches between projector's power on and standby. When turning off the power (standby), pressing the button once will bring up a confirmation message on the
  • NEC NP-PA1705UL-W | User Manual - Page 39
    1. Check the product overview, supplied items and part names 2 345 11 12 13 1 6 8 9 7 10 9. ENTER Button Moves to the next menu when the onscreen menu is displayed. Confirms the item when the confirmation message is displayed. 10. EXIT Button Returns to the menu on the previous level when
  • NEC NP-PA1705UL-W | User Manual - Page 40
    Terminal Panel Features 4 1 1. Check the product overview, supplied items and part names 25 3 7 8 9 10 6 1. HDMI 1 IN Terminal (Type A) Connects to the output terminals of a computer, blu-ray player, etc. 2. HDMI 2 IN Terminal (Type A) Connects to the output terminals of a computer, blu-
  • NEC NP-PA1705UL-W | User Manual - Page 41
    cannot be performed. • When [HDBaseT] is selected in the [REMOTE SENSOR] and the projector is connected to a commercially-available transmission device that supports HDBaseT, remote control operations in infra-red cannot be carried out if transmission of remote control signals has been set up in the
  • NEC NP-PA1705UL-W | User Manual - Page 42
    1. Check the product overview, supplied items and part names 1-4. Part Names of the Remote Control 121 1. Infrared Transmitter Remote control signals are sent via infrared signal. Point the remote control at the remote control 3 4 receiver on the projector. 2. Remote Jack 5 Connect a
  • NEC NP-PA1705UL-W | User Manual - Page 43
    is displayed will reset the adjust- 30 32 ment values. 29 This only works for the items with DEFAULT dis- 31 played in the Operation Guide. 15. SHUTTER/OSD OPEN ( )/CLOSE ( ) Button Press the CLOSE button to turn off the light source and temporarily stop projection. Press the OPEN button to
  • NEC NP-PA1705UL-W | User Manual - Page 44
    1. Check the product overview, supplied items and part names 121 17. Geometric. Button Displays [GEOMETRIC CORRECTION] from the on-screen menu. Use it to adjust distortions in 3 4 projected images. 18. STATUS Button 5 Displays [USAGE TIME] of [INFO.] from the on- 6 7 screen menu. 19.
  • NEC NP-PA1705UL-W | User Manual - Page 45
    1. Check the product overview, supplied items and part names 121 30. ID SET Button Used to set the control ID when performing indi- vidual operations on multiple projectors using the 3 4 remote control. Also used to toggle the character keyboard when the character input screen is dis- 5
  • NEC NP-PA1705UL-W | User Manual - Page 46
    1. Check the product overview, supplied items and part names Battery Installation 1. Press the catch and remove the battery cover. 2 1 2. Install new ones (AAA). Ensure that you have the batteries' polarity (+/−) aligned correctly. 3. Slip the cover back over the batteries until it snaps into place.
  • NEC NP-PA1705UL-W | User Manual - Page 47
    1. Check the product overview, supplied items and part names Operating Range for Wireless Remote Control b a a b a a c d a d a a b a b a: 7 m/276" / b: 20 m/787" / c: Remote sensor on projector cabinet / d: Remote control • The projector will not respond if there are objects between the
  • NEC NP-PA1705UL-W | User Manual - Page 48
    1. Check the product overview, supplied items and part names Using the Remote Control in Wired Operation Connect one end of the remote cable to the REMOTE terminal and the other end to the remote jack on the remote control. REMOTE a a: Remote jack NOTE: • When a remote cable is inserted into the
  • NEC NP-PA1705UL-W | User Manual - Page 49
    2. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. 2-1. Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 19) Step 2 • Turning on the projector (→ page 22) Step 3 •
  • NEC NP-PA1705UL-W | User Manual - Page 50
    2. Projecting an Image (Basic Operation) 2-2. Connecting Your Computer/Connecting the Power Cord 1. Connect your computer to the projector. This section will show you a basic connection to a computer. Connect a commercially available HDMI cable between the computer's HDMI output connector and the
  • NEC NP-PA1705UL-W | User Manual - Page 51
    2. Projecting an Image (Basic Operation) HDMI 1 IN HDMI 2 IN a b Make sure that the prongs are fully inserted into both the AC IN and the wall outlet. To wall outlet a: Power cord (supplied) / b: HDMI cable (not supplied) • Use a Premium High Speed HDMI Cable. CAUTION: Parts of the projector
  • NEC NP-PA1705UL-W | User Manual - Page 52
    2. Projecting an Image (Basic Operation) Using the power cord stopper To prevent the power cord from accidently removing from the AC IN of the projector, use the power cord stopper. NOTE: • If you pull on the power supply cord while the connector is fixed, the main unit may fall down and be damaged
  • NEC NP-PA1705UL-W | User Manual - Page 53
    2-3. Turning on the Projector 2. Projecting an Image (Basic Operation) WARNING The projector produces a strong light. When turning on the power, operate from the side or rear of the projector (outside the hazard zone). Also, when turning on the power, make sure no one within the projection range
  • NEC NP-PA1705UL-W | User Manual - Page 54
    Performing Lens Calibration After mounting the separately available lens unit or replacing a lens unit, perform [LENS CALIBRATION] by holding to press ZOOM/L-CALIB. button on the cabinet over two seconds. Calibration corrects the adjustable zoom, shift, and focus range. If calibration is not
  • NEC NP-PA1705UL-W | User Manual - Page 55
    2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 30 menu languages. To select a menu language, follow these steps: 1. Use the or
  • NEC NP-PA1705UL-W | User Manual - Page 56
    2. Projecting an Image (Basic Operation) 2-4. Selecting a Source Selecting the computer or video source NOTE: • Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the INPUT button for 1 second or longer. The projector will search for
  • NEC NP-PA1705UL-W | User Manual - Page 57
    2. Projecting an Image (Basic Operation) Selecting Default Source You can set a source as the default source so that it will be displayed each time the projector is turned on. 1. Press the MENU button. The menu will be displayed. 2. Press the ▶ button to select [SETUP] and press the ▼ button or the
  • NEC NP-PA1705UL-W | User Manual - Page 58
    2. Projecting an Image (Basic Operation) 2-5. Adjusting the Picture Size and Position Use the lens shift, the adjustable tilt foot, the zoom and the focus to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity. Adjusting the projected image's vertical
  • NEC NP-PA1705UL-W | User Manual - Page 59
    2. Projecting an Image (Basic Operation) Adjusting the vertical position of a projected image (Lens shift) CAUTION • Perform the adjustment from behind or from the side of the projector. If adjustments are performed from the front, your eyes could be exposed to strong light and get injured. • Keep
  • NEC NP-PA1705UL-W | User Manual - Page 60
    2. Projecting an Image (Basic Operation) NOTE: • If the lens is shifted to the maximum in the diagonal direction, the screen peripheral area will be dark or shaded. TIP: • The figure below shows the lens shift adjustment range (projection method: Desktop/Front) of the NP54ZL lens unit. 65 %V H
  • NEC NP-PA1705UL-W | User Manual - Page 61
    2. Projecting an Image (Basic Operation) Focus Recommend to perform the focus adjustment after leaving the projector under the state the TEST PATTERN has been projected for over 30 minutes. Applicable lens: NP51ZL/NP52ZL/NP53ZL 1. Press the FOCUS button. The [LENS FOCUS] control screen will be
  • NEC NP-PA1705UL-W | User Manual - Page 62
    3. Press ▼ button to select the [PERIPHERY] on the on-screen menu, and then press either ◀ or ▶ button to align the focus of screen peripheral area. 2. Projecting an Image (Basic Operation) 4. Repeat steps 2 and 3 until the entire projection screen is in focus. Applicable lens: NP54ZL/NP55ZL/
  • NEC NP-PA1705UL-W | User Manual - Page 63
    2. Projecting an Image (Basic Operation) Zoom 1. Press ZOOM/L-CALIB. button. The [ZOOM] adjustment screen will be displayed on. * In another way, press the ZOOM button on the remote control. Press ◀▶ buttons to adjust zoom. 32
  • NEC NP-PA1705UL-W | User Manual - Page 64
    Adjusting the Tilt Foot 1. Turn the left and right tilt foot to adjust. The tilt foot lengthen and shorten when turned. Turn one of the tilt foot to adjust the image so that it is level. • The tilt foot can be lengthened by a maximum of 10 mm/0.4". • The tilt foot can be used to tilt the projector
  • NEC NP-PA1705UL-W | User Manual - Page 65
    Operation) 2-6. Adjusting a picture and sound Adjusting the picture Display [ADJUST] in the on-screen menu and adjust the picture. Refer to the Installation Manual for details. Turning Up or Down Volume Sound level from the AUDIO OUT terminal can be adjusted. Important: • Do not turn up the volume
  • NEC NP-PA1705UL-W | User Manual - Page 66
    2-7. Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the STANDBY button on the remote control. The [POWER OFF / ARE YOU SURE ? / CARBON SAVINGS-SESSION 0.000[g-CO2]] message will appear. 2. Projecting an Image (Basic Operation) 2.
  • NEC NP-PA1705UL-W | User Manual - Page 67
    2. Projecting an Image (Basic Operation) 2-8. After Use 1. Unplug the power cord. ① Pull to an appropriate position while pushing down the knob of the power cord stopper. ② Press down the knob on the clamper to open the clamper and take out the power cord. a b c a: Clamper / b: Knob (power cord
  • NEC NP-PA1705UL-W | User Manual - Page 68
    3. Appendix 3-1. Specifications Model name Method Specifications of main parts Liquid crystal Size panel Pixels (*1) Projection lenses Zoom Focus Lens shifting Light source Optical device Light output (*2) Screen size (throw distance) Color reproducibility Scanning frequency
  • NEC NP-PA1705UL-W | User Manual - Page 69
    , Lip Sync. Audio: LPCM; up to 2 ch, sample rate 32/44.1/48 KHz, sample bit; 16/20/24-bit HDMI: Supports HDCP 2.2/1.4 HDBaseT: Supports HDCP 2.2/1.4 *5 The projector's protection functions will activate depending on the temperature of the operating environment. • For additional information visit: US
  • NEC NP-PA1705UL-W | User Manual - Page 70
    be available on market after April 2024. The values for NP51ZL, NP52ZL, and NP56ZL on this manual are tentative, please contact your dealer about their detailed information or refer to the latest manual uploaded on our web site. Function Lens model name NP51ZL NP52ZL NP53ZL NP54ZL NP55ZL NP56ZL
  • NEC NP-PA1705UL-W | User Manual - Page 71
    3. Appendix 3-2. Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Feature of each indicator ① POWER indicator ② STATUS indicator ③ LIGHT indicator ④ TEMP. indicator Indicator Message (Status
  • NEC NP-PA1705UL-W | User Manual - Page 72
    3. Appendix POWER STATUS LIGHT Blue (Light) Off Green (Blink*3) TEMP. Off Projector status Powered state ([REF. LIGHT MODE] is [SILENT] or [LONG LIFE]) [LENS CALIBRATION] implement request. Status varies Orange (Blink*4) Status varies Off Performing the lens calibration Blue (Light)
  • NEC NP-PA1705UL-W | User Manual - Page 73
    for the projector and the remote control do not match. Temperature problem Temperature problem Off Off Off Red (Light) Status varies Red (Light) Orange (Blink*3) or (Blink*5) Lens mounting error Off Error requiring service support Status varies Red (Light) Status varies Status varies Error
  • NEC NP-PA1705UL-W | User Manual - Page 74
    3. Appendix When the thermal protector is activated: When inside temperature of the projector becomes too high or low, the POWER indicator start to red blink in a short cycle. After this happened, the thermal protector will activate and the projector may be turned off. In this case, please take the
  • NEC NP-PA1705UL-W | User Manual - Page 75
    Problems & Solutions 3. Appendix Problem on the projector again. • In case it's hard to think the trouble is not caused on the above mentioned conditions, unplug the power cord refer to the user guide accompanied with your computer or graphics card, or contact the support center for your computer
  • NEC NP-PA1705UL-W | User Manual - Page 76
    • Check the computer's resolution and frequency. Make sure that the resolution you are trying to display is supported by the projector. • Adjust the computer image manually with the Horizontal/Vertical in the [IMAGE OPTIONS]. • Aim the remote control's infrared transmitter towards the projector
  • NEC NP-PA1705UL-W | User Manual - Page 77
    3. Appendix 3-3. Mounting a lens (sold separately) Six separate bayonet style lenses can be used with this projector. The descriptions here are for the NP54ZL lens. Mount other lenses in the same manner. After installing or replacing the lens unit, press the ZOOM/L-CALIB. button on the projector to
  • NEC NP-PA1705UL-W | User Manual - Page 78
    2. Remove the lens cap on the back of the lens. NOTE: • Make sure to remove the lens cap at the unit back side. If the lens unit with the lens cap remaining on is installed on the projector, it may cause of malfunction. 3. Remove the lens cover. Pull the cover about 2 cm forward, then lift it up.
  • NEC NP-PA1705UL-W | User Manual - Page 79
    , insert the lens unit into the projector's lens hole. Align the position of the connector and gently insert it as far back as possible. 6. While supporting the lens unit with your hand, press the left side of the lens lock lever towards the LOCK position until it stops. A clicking sound will
  • NEC NP-PA1705UL-W | User Manual - Page 80
    . 5. Wait until the projector cabinet is cool enough to handle. 1. Remove the lens cover. Pull the cover about 2 cm forward, then lift it up. 2. While supporting the lens unit with one hand, press the right side of the lens lock lever towards the UNLOCK position until it stops. NOTE: • Hold the
  • NEC NP-PA1705UL-W | User Manual - Page 81
    3. Gently pull the lens unit out from the projector. Once the lens unit has been removed, attach the rear lens cap included with the lens unit before storing. 4. Attach the lens cover to the projector. (1) Leave a gap of about 2 cm when attaching the lens cover. (2) Push it in the direction of the
  • NEC NP-PA1705UL-W | User Manual - Page 82
    to register your new projector. This will activate your limited parts and labor warranty and InstaCare service program. Visit our web site at https://www.sharpnecdisplays.us, click on support center/register product and submit your completed form online. Upon receipt, we will send a confirmation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Projector
PA1705UL-W/PA1705UL-B
PA1505UL-W/PA1505UL-B
User’s Manual
Model No.
NP-PA1705UL-W/NP-PA1705UL-B/NP-PA1505UL-W/NP-PA1505UL-B