NEC NP-PA803UL PC Control Connectors and Cables for all projectors and plasmas

NEC NP-PA803UL Manual

NEC NP-PA803UL manual content summary:

  • 1

NEC Display Solutions of America,
Inc.
www.necdisplay.com
PC Control Connectors and Cables for NEC Projectors
v6.9
NEC labels the co
nnector for RS232C serial communication the “PC Control” port.
This PC Control port can be used for the following functions:
• Communication from an AMX, Crestron or Extron control system.
• Communication from a PC using the NEC PC Control Utility for b
asic projector control.
• Communication from a PC using the NEC Geometric Correction Tool for adjusting a pro
jector to display an image on a
cylindrical, spherical or corner screen.
• Communication from a PC using the NEC Image
Express Utility to send images to the projector for presentations as
well as basic projector control, projector lamp and error status or asset management. (These functions can also be
accomplished via LAN or USB with models that have a network interface, optional network PC card or USB interface)
NEC uses two types of connectors for the PC Control port, a D-Sub 9pin for larger projectors and a mini-DIN 8pin for smaller
projectors due to space constraints on those models.
Models with D-Sub 9Pin PC Control port:
M282X/M322X/M322W/M402X//M402H/M332XS/M352WS, M283X/M323X/M323W/
M363X/M363W/M403X/M403H/M333XS/M352WS
ME301X/ME331X/ME361X/ME401X/ME301W/ME331W/ME361W/ME401W
VE281/VE281X, VE282B/VE282XB, V311X/V311W, V332X/V332W/V302H
P401W/P421X/P451W/P501X
P452W/P452H/P502W/P502H
P502WL/P502HL
PA521U/PA571W/PA621X , PA622U/PA672W/PA722X, PA653U/PA803U/PA853W/PA903X
PE401H
PX602UL/PX602WL
PX700W2/PX750U2/PX800X2
PX803UL, PX1004UL
PH1000U/PH1400U
PH1201QL
PH1202HL
UM330X/UM330W, UM361X/UM351W/UM352W
U321H
A standard D-Sub 9P female to D-
Sub 9P female “Null Modem” or “Cross” cable can be obtained at a local compu
ter or
electronics store. A “Straight Through” cable will not work.
If you prefer to assemble your own cable, you can use the pin out information below.
D-Sub 9P Female
D-Sub 9P Female
Pin 2
Pin 2
Pin 3
Pin 3
Pin 5
Pin 5
Pin 7
Pin 8
GND
GND
*Tie Pin 7 & 8 together at both ends of the cable if desired
TxD
RxD
RxD
TxD
Pin 7
Pin 8
1
2
3
4
5
6
7
8
9
To GND of PC
To RxD of PC
To TxD of PC
To CTS of PC
To RTS of PC