NEC NP-UM351W Installation Manual
NEC NP-UM351W Manual
 |
View all NEC NP-UM351W manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC NP-UM351W manual content summary:
- NEC NP-UM351W | Installation Manual - Page 1
-+- Interactive White Board Kit NPO3Wi Installation Manual NEC CONTENTS Introduction Read This Before Starting Features Packaged Items Part Names Setup Procedure Troubleshooting Specifications ENG-2 ENG-4 ENG-5 ENG-6 ENG-7 ENG-9 ENG-15 ENG-15 ENG-1 -+- - NEC NP-UM351W | Installation Manual - Page 2
to an NEC projector to this product, the white board or wall can be used as your interactive white board. The supplied stylus pen has a built-in super-capacitor charge storage. Charge the super-capacitor for 3 minutes before using the stylus pen for the first time. This manual uses the example - NEC NP-UM351W | Installation Manual - Page 3
changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is - NEC NP-UM351W | Installation Manual - Page 4
described below. Be sure to understand them thoroughly before reading this manual. A WARNING Failing to heed this pictogram and handling the product surrounding property. Examples of pictograms A The symbol indicates instructions urging caution (including warnings). A concrete indication of the - NEC NP-UM351W | Installation Manual - Page 5
store of purchase or local government for instructions. Features • Interactive electronic white board function on the screen with the supplied stylus pen. Supported projectors: - UM330X, UM280X, UM330W, UM280W - M352WS drawing software, refer to the user manual included with the drawing software. • - NEC NP-UM351W | Installation Manual - Page 6
• USB cable (4.5 m/14.8 feet) x 1 For connecting the computer with the camera unit O O • Adapter cover (24F50130) x 1 (Supported models: UM330X/UM280X/ UM330W/UM280W) • Installation Manual (this document) x 1 • Screw (M3) x 3 ft" The adapter and the adapter cover for UM330X/UM280X/U M330W/UM280W - NEC NP-UM351W | Installation Manual - Page 7
Part Names The drawing shows an example of the optional wall mount unit (Model name: NPO4WK) with the projector mounted on it. Projector USB cable Camera unit Screen or whiteboard Stylus pen Computer ENG-7 - NEC NP-UM351W | Installation Manual - Page 8
Part names of the supplied stylus pen Pen tip Indicator (LED) Charging port (USB) Charging the stylus pen Use the supplied USB cable for charging the stylus pen to connect the charging port (USB) of the stylus pen with the USB port of the computer. The stylus pen will start charging. Charging will - NEC NP-UM351W | Installation Manual - Page 9
the computer to perform the calibration. 1. Mount the camera unit onto the projector. Two kinds of adapters are included. One is for UM330X/UM280X/UM330W/ cable cover, follow the procedure provided in the user's manual included with the projector. • The adapter and the adapter cover for UM330X/UM280X - NEC NP-UM351W | Installation Manual - Page 10
hole of the cable cover with the one of the adapter. Tighten the screw inside the cable cover. 1 2 2. Attach the cable cover to the projector. (c):# 3. Connect the USB cable to the camera unit. Insert the L-shaped connector of the included USB cable (4.5 m/ 14.8 feet) into the USB port (type - NEC NP-UM351W | Installation Manual - Page 11
4. Attach the camera unit to the adapter. Engage the two protrusions of the camera unit in the holes of the adapter to align the screw hole. Tighten the screw to ensure safety. N 6) 5. Attach the adapter cover to the adapter. Engage the two tabs of the lower end of the adapter cover in the mounting - NEC NP-UM351W | Installation Manual - Page 12
of the adapter to align the screw hole. Tighten the screw to ensure safety. 2. Attach the adapter to the projector. Engage the two protrusions of the adapter in the holes of the projector to align the screw hole. Tighten the screw to ensure the safety. NOTE • Do not allow the screws to - NEC NP-UM351W | Installation Manual - Page 13
power and then adjust the position / focus of the projected image. For the adjustment procedure, see the projector user's manual. 4. Connect the computer and the camera unit with the included USB cable. Insert the L-shaped connector of the included USB cable (4,5 m/ 14.8 feet) into the - NEC NP-UM351W | Installation Manual - Page 14
on the computer for calibration. Download the driver and the calibration software from our website and install them on the computer. URL: http://www.nec-display.com/dVen/index.html The operation on installing and calibrating is available in PDF (Portable Document Format). To view or print the PDF - NEC NP-UM351W | Installation Manual - Page 15
at the troubleshooting in the NP03Wi software guide. Refer to the software guide on the support page for our projectors uploaded in performing the calibration automatically will not resolve the problem, try to perform the calibration manually. Specifications Camera unit • Input terminal: USB Type
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
-+-
NEC
Interactive
White
Board
Kit
NPO3Wi
Installation
Manual
CONTENTS
Introduction
ENG-2
Read
This
Before
Starting
ENG-4
Features
ENG-5
Packaged
Items
ENG-6
Part
Names
ENG-7
Setup
Procedure
ENG-9
Troubleshooting
ENG-1
5
Specifications
ENG-15
ENG-1
-+-