NEC NP-VE303 Users Manual

NEC NP-VE303 Manual

Get NEC NP-VE303 PDF manuals and user guides View all NEC NP-VE303 manuals
Add to My Manuals
Save this manual to your list of manuals

NEC NP-VE303 manual content summary:

  • NEC NP-VE303 | Users Manual - Page 1
    Projector VE303/VE303X User's Manual Model No. NP-VE303/NP-VE303X
  • NEC NP-VE303 | Users Manual - Page 2
    DLP, BrilliantColor, and DLP manual may be the trademarks manual may not be reprinted in part or whole without permission. (2) T he contents of this user's manual manual; however, should you notice any questionable points, errors or omissions, please contact us. (4) N otwithstanding article (3), NEC
  • NEC NP-VE303 | Users Manual - Page 3
    this manual carefully before using your NEC projector and keep the manual handy ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the provided. The information should be read carefully to avoid problems. WARNING: TO PREVENT FIRE OR SHOCK, DO NOT
  • NEC NP-VE303 | Users Manual - Page 4
    specified by NEC Display Solutions of America, Inc. in this manual. Failure to Important Safeguards These safety instructions are to ensure the long life of your projector and to prevent fire the ceiling must be strong enough to support the projector and the installation must be in accordance with
  • NEC NP-VE303 | Users Manual - Page 5
    serviced by a qualified service personnel under the following conditions: - When the power cord or plug is damaged or frayed. - If liquid has been spilled into the projector, or if it has been exposed to rain or water. - If the projector does not operate normally when you follow the instructions
  • NEC NP-VE303 | Users Manual - Page 6
    projector exhibits a distinct change in performance, indicating a need for service. • Disconnect the power cord and any other cables before carrying the projector. • Turn off the projector replace the lamp, follow all instructions provided on pages 71-72. , CONTACT: NEC Display Solutions of
  • NEC NP-VE303 | Users Manual - Page 7
    to read health care precautions that may be found in the user's manual included with your LCD shutter eyeglasses or your 3D compatible content such image to flicker. Switch [FAN MODE] to [AUTO]. • Using the projector at altitudes approximately 2500 feet/760 meters or higher can shorten the life of
  • NEC NP-VE303 | Users Manual - Page 8
    ADVANCED 63 Appendices 65 Troubleshooting 65 Replacing the lamp 71 Cleaning procedure for the lens.........73 Specifications 74 Compatibility Modes 77 83 PC Control Codes and Cable Connection 84 Troubleshooting Check List 85 REGISTER YOUR PROJECTOR! ....87 On Screen Display 33 How to
  • NEC NP-VE303 | Users Manual - Page 9
    Usage Notice Precautions Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit. ■ Warning■ Warning- ■ Warning■ Warning■ Warning- This projector will detect the life of the lamp itself. Please be sure to change the lamp when it
  • NEC NP-VE303 | Users Manual - Page 10
    or wall mounted installation. - Apply excessively strong pressure against the lens. - Keep finger prints off the lens surface. - Bring the projector using the Security Lock Hunger. ■ Install and store in the following conditions: - In powerful magnetic fields. - In corrosive gas environment
  • NEC NP-VE303 | Users Manual - Page 11
    speaker for an integrated audio solution Powerful 2.0 watt monaural speakers provide volume need for large rooms. ■ 3D features supported The projector can support following format by DLP® Link. - HDMI 3D - 120Hz 3D (only available if your PC can output 120Hz) - HQFS 3D ■ Preventing unauthorized use
  • NEC NP-VE303 | Users Manual - Page 12
    applications for each country, some regions may have different accessories. Security Label Documentation:  NEC Projector CD-ROM  (P/N: 7N952291)  Quick Setup Guide (P/N: 7N8N6421)  Important Information (P/N: 7N8N6411) For North America:  Limited Warranty For Europe:  Guarantee Policy
  • NEC NP-VE303 | Users Manual - Page 13
    Introduction Product Overview Projector 1 2 3 4 5 9 6 8 7 13 10 9 12 11 1. Exhaust Vent 2. Focus Ring 3. Control Panel 4. Zoom Lever 5. Intake Vent 6. Security Lock Hunger 7. Remote Control Sensor 8. Lens 9. Tilt Foot 10. Ports
  • NEC NP-VE303 | Users Manual - Page 14
    Ports 1 2 3 Introduction 4 5 6 8 7 1. SERVICE Port (for service purpose only) 2. HDMI IN Port 3. COMPUTER IN Port 4. PC CONTROL Port 5. VIDEO IN Port 6. AUDIO IN Jack (3.5mm mini jack) 7. KensingtonTM Lock Port 8. AC IN Terminal 7 ... English
  • NEC NP-VE303 | Users Manual - Page 15
    volume. - Use , , or to select items or make adjustments to your selection. - Use as Quick Keys. Please see page 13. Increase speaker volume. Indicate the projector's lamp status. Indicate the projector's various status. Indicate the
  • NEC NP-VE303 | Users Manual - Page 16
    /off. Please see the "Power On/Off the Projector" section on pages 26-27. 8 EXIT Press to exit the OSD menu. 9 the image to compensate Correction for distortion caused by tilting the projector (vertical ± 40 degrees). 12 ENTER Confirm your section of items in sub menu operation. 9 ...
  • NEC NP-VE303 | Users Manual - Page 17
    7 22 8 23 9 24 10 25 26 27 11 28 12 29 13 30 14 15 31 1 2 English ... 10 POWER ON POWER OFF Power on the projector. Please see the "Power On/Off the Projector" section on pages 26-27. Power off the projector. Please see the "Power On/Off the
  • NEC NP-VE303 | Users Manual - Page 18
    D-ZOOM Zoom in/out the projected image. 12 KEYSTONE Adjust the image to compensate Correction for distortion caused by tilting the projector. 13 ECO Dim the projector lamp which will lower power consumption and extend the lamp life. Please see page 60. 14 HELP This function ensures easy
  • NEC NP-VE303 | Users Manual - Page 19
    Introduction 20 21 22 23 24 25 26 27  When the demagnified image is displayed, the , , , or button is not available to move the image. 28 29 30 31 USB-B No function. Number Button No function. LAN No function. CLEAR Clear the password while you input the password. FREEZE To pause the
  • NEC NP-VE303 | Users Manual - Page 20
    Introduction Quick Key Activate Behavior Quick keys are available when no OSD is displayed. The Quick Keys can be accessed on Control Panel or remote control ( ). The behavior of the Quick Keys is as described in the following table: Quick Key Function LEFT ( )/ RIGHT ( ) UP ( )/ DOWN ( ) Pop
  • NEC NP-VE303 | Users Manual - Page 21
    .  The infrared signal operates by line-ofsight up to a distance of about 22 feet/7 m and within a 60-degree angle of the remote sensor on the projector cabinet. 3. Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries or new and old batteries
  • NEC NP-VE303 | Users Manual - Page 22
    computer. Please refer to page 16. specifications and version of graphic adapters or drivers. Step 2: Connect the projector to the computer. Please refer to visit our website: http://www.nec-display.com/dl/en/index.html • The projector's COMPUTER IN connector supports DDC/CI (Display Data Channel
  • NEC NP-VE303 | Users Manual - Page 23
    Step 1: Install Virtual Remote Tool on the computer • Supported OS  To install or uninstall the program, the Windows on your computer. 1 Download the updated VRT exe file from our web site (http://www.nec-display.com/dl/en/index.html). 2 Double-click the VRT. exe icon. The Installer will
  • NEC NP-VE303 | Users Manual - Page 24
    window will be displayed. 3. Click Virtual Remote Tool from the list and then click "Remove". Follow the instructions on the screens to complete the uninstallation. Step 2: Connect the projector to the computer 1 Use the supplied computer cable (VGA) to connect the COMPUTER IN connector of the
  • NEC NP-VE303 | Users Manual - Page 25
    menu Click [Start] -> [All Programs] or [Programs] -> [NEC Projector User Supportware] -> [Virtual Remote Tool] -> [Virtual Remote Tool]. When Virtual Remote Tool starts for the first time, "Easy Setup" window will be displayed. Follow the instructions on the screens. When "Easy Setup" is completed
  • NEC NP-VE303 | Users Manual - Page 26
    "Help". The Help screen will be displayed. Displaying the help file using the Start Menu. Click "Start" -> "All programs" or "Programs" -> "NEC Projector User Supportware" -> "Virtual Remote Tool" and then "Virtual Remote Tool Help" in this order. The Help screen will be displayed. 19 ... English
  • NEC NP-VE303 | Users Manual - Page 27
    . Using the utility software "PC Control Utility Pro 4" that you can download from our web site (http://www.nec-display.com/dl/en/index.html), the projector can be controlled from a computer via the serial connection. Control Functions Power On/Off, signal selection, picture freeze, picture
  • NEC NP-VE303 | Users Manual - Page 28
    Step 1: Install PC Control Utility Pro 4 on the computer • Supported OS - PC Control Utility Pro 4 will run on the following operating Internet and download the updated PCCUP4 exe file from our web site (http://www.nec-display.com/dl/en/ index.html). Windows 7, and Windows Vista)  Exit
  • NEC NP-VE303 | Users Manual - Page 29
    in the license agreement" and then click "Next". Follow the instructions on the installer screens to complete the  For the Schedule installation Start Menu. Click "Start" -> "All programs" or "Programs" -> "NEC Projector User Supportware" -> "PC Control Utility Pro 4" -> "PC Control Utility
  • NEC NP-VE303 | Users Manual - Page 30
    available 3D eyeglasses which meet the following requirements: - DLP® Link compatible - Support vertical refresh rate up to 144 Hz. Steps for viewing 3D images on the projector 1. Connect the projector to your video equipment. 2. Turn on the projector, display the on-screen menu. 3. Select [3D
  • NEC NP-VE303 | Users Manual - Page 31
    Connect to Computer/Notebook To the wall outlet  Make sure that the power plug is fully inserted into both the projector AC IN terminal and the wall 1 outlet. 2 34 5 E62405SP R 1 Power cord (supplied) 2 HDMI cable 3 Computer cable (VGA) (supplied) 4 RS232 cable 5 Audio cable
  • NEC NP-VE303 | Users Manual - Page 32
    DVD Player, Set-top Box, HDTV receiver To the wall outlet  Make sure that the power plug is fully inserted into both the projector AC IN terminal and the wall 1 outlet. 2 3 4 E62405SP R Composite Video Output 5  Due to the difference in applications for each country, some regions
  • NEC NP-VE303 | Users Manual - Page 33
    connected, the POWER/STANDBY LED will turn Red or you will get the Orange (*). Startup menu. This menu gives you the 2. Turn on the projector by pressing the "POWER ON" button opportunity to select on the remote control or the button on the control panel. the menu languages. At this
  • NEC NP-VE303 | Users Manual - Page 34
    off by using the "POWER OFF" button. 2. Press the "POWER OFF" button again to confirm. 3. Disconnect the power cord from the electrical outlet and the projector. If you disconnect the power cord while viewing the picture and connect the power cord again, wait for at least one second until you
  • NEC NP-VE303 | Users Manual - Page 35
    flashes red and the message below displays on-screen, it indicates the fan failed. Stop using the projector and disconnect the power cord from the electrical outlet, then contact your local dealer or our service center. WARNING! FAN LOCKED THE PROJECTOR WILL SWITCH OFF AUTOMATICALLY. English ... 28
  • NEC NP-VE303 | Users Manual - Page 36
    and lower the image to fill the screen. 1. Locate the tilt foot you wish to modify on the underside of the projector. 2. Rotate the tilt foot clockwise to raise the projector or counter-clockwise to lower it. Repeat with the remaining feet as necessary. Tilt foot (rear) Tilt foot (front) Tilt
  • NEC NP-VE303 | Users Manual - Page 37
    Installation Adjusting the Projector's Focus To focus the image, rotate the focus ring until the image is clear. To zoom the image, turn the zoom lever in or out. Zoom Lever English ... 30 Focus Ring
  • NEC NP-VE303 | Users Manual - Page 38
    Installation Adjusting Projection Image Size (Diagonal) Projection Image Size from 30" to 300" (0.76 to 7.62 meters). Screen Width Screen Diagonal Screen Center Screen Height (B) (D) Screen Bottom (α) Lens Center B = Vertical distance between lens center (C) and screen center C = Throw
  • NEC NP-VE303 | Users Manual - Page 39
    Installation Screen Size (B) Diagonal Width Height (C) Wide Tele D (WIDE) α Wide Tele inch mm inch mm inch mm inch mm inch mm inch mm inch mm degree degree 90 2286 72 1829 54 1372 35 891 140 3566 155 3932 8 100 2540 80 2032 60 1524 39 990 156 3962 172 4368 9 120 3048 96 2438 72 1829 47
  • NEC NP-VE303 | Users Manual - Page 40
    User Controls On Screen Display The Projector has a multilingual On Screen Display that allows you to main menu. 6. To exit, press the MENU button again. The OSD will be closed and the projector will automatically save the new settings. Main Menu  If no button operation is made for 30 seconds
  • NEC NP-VE303 | Users Manual - Page 41
    User Controls Menu Tree MAIN MENU GENERAL IMAGE ADVANCED GENERAL SCREEN 3D SETTINGS SETTINGS GENERAL SUB MENU SETTINGS PICTURE MODE PRESENTATION/HIGH-BRIGHT/VIDEO/ MOVIE/ sRGB/ BLACKBOARD/ USER1/ USER2 WALL COLOR OFF/ RED/ GREEN/ BLUE/ CYAN/ MAGENTA/ YELLOW BRIGHTNESS 0~100 CONTRAST
  • NEC NP-VE303 | Users Manual - Page 42
    User Controls MAIN MENU GENERAL SETTINGS SIGNAL ADVANCED SUB MENU ORIENTATION HDMI SETTINGS MUTE VOLUME PHASE CLOCK H. POSITION V. POSITION LOGO CLOSED CAPTION SECURITY TEST PATTERN SETTINGS DESKTOP FRONT/ DESKTOP REAR/ CEILING FRONT/ CEILING REAR VIDEO LEVEL (AUTO/NORMAL/ ENHANCED) /AUDIO SELECT
  • NEC NP-VE303 | Users Manual - Page 43
    User Controls MAIN MENU INFORMATION OPTIONS ADVANCED SUB MENU MODEL NO. SETTINGS SERIAL NUMBER SOURCE RESOLUTION SOFTWARE VERSION CONTROL ID ENABLE TO SELECT DEPENDS ON SETTING OF CONTROL ID OF "OPTIONS" "ADVANCED" DIRECT POWER ON
  • NEC NP-VE303 | Users Manual - Page 44
    User Controls IMAGE | GENERAL IMAGE SCREEN SETTINGS GENERAL ADVANCED PICTURE MODE WALL COLOR BRIGHTNESS CONTRAST SHARPNESS SATURATION HUE PRESENTATION OFF OPTIONS SELECT COMPUTER EXIT MOVE MOVE PICTURE MODE There are many factory presets optimized for various types of images. Use the
  • NEC NP-VE303 | Users Manual - Page 45
    User Controls WALL COLOR Use this function to choose a proper color according to the wall. It will compensate the color deviation due to the wall color to show the correct image tone. WALL COLOR OFF RED GREEN BLUE CYAN MAGENTA YELLOW BRIGHTNESS Adjust the brightness of the image. Press the 
  • NEC NP-VE303 | Users Manual - Page 46
    User Controls SHARPNESS Adjust the sharpness of the image.  Press the button to decrease the sharpness.  Press the button to increase the sharpness. SHARPNESS EXIT EXIT ADJUST SATURATION Adjust a video image from black and white to fully saturated color.  P ress the button to decrease the
  • NEC NP-VE303 | Users Manual - Page 47
    User Controls IMAGE | ADVANCED IMAGE SCREEN SETTINGS GENERAL ADVANCED GAMMA BrilliantColor™ COLOR TEMP. DYNAMIC CONTRAST COLOR COLOR SPACE FILM LOW OFF AUTO OPTIONS SELECT COMPUTER EXIT MOVE MOVE GAMMA This allows you to choose a gamma table that has been fine-tuned to bring out the
  • NEC NP-VE303 | Users Manual - Page 48
    User Controls BrilliantColor™ This adjustable item utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing true, more vibrant colors. The range is from "0" to "10". If you prefer a stronger enhanced image, adjust toward the maximum setting
  • NEC NP-VE303 | Users Manual - Page 49
    User Controls COLOR Press ENTER into the next menu as below and then use the or button to select item. COLOR RED GAIN GREEN GAIN BLUE GAIN CYAN GAIN MAGENTA GAIN YELLOW GAIN RED BIAS GREEN BIAS BLUE BIAS RESET  RED GAIN RED GAIN EXIT EXIT  GREEN GAIN GREEN GAIN EXIT EXIT  BLUE GAIN BLUE
  • NEC NP-VE303 | Users Manual - Page 50
    User Controls  YELLOW GAIN YELLOW GAIN EXIT EXIT  RED BIAS RED BIAS ADJUST EXIT EXIT  GREEN BIAS GREEN BIAS ADJUST EXIT EXIT  BLUE BIAS BLUE BIAS ADJUST EXIT EXIT ADJUST  U se the or button to adjust the setting.  R ESET: Choose "YES" to return the factory default
  • NEC NP-VE303 | Users Manual - Page 51
    User Controls SCREEN | GENERAL IMAGE SCREEN SETTINGS GENERAL 3D SETTINGS ASPECT RATIO OVERSCAN V KEYSTONE AUTO OPTIONS SELECT COMPUTER EXIT MOVE MOVE ASPECT RATIO Use this function to choose your desired aspect ratio.  4:3: This format is for 4×3 input sources.  16:9: This format is
  • NEC NP-VE303 | Users Manual - Page 52
     Each I/O has different setting of "OVERSCAN". User Controls OVERSCAN Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. OVERSCAN  Please see more information on Quick Keys on page 13. V KEYSTONE Press the or
  • NEC NP-VE303 | Users Manual - Page 53
    User Controls SCREEN | 3D SETTINGS IMAGE SCREEN SETTINGS GENERAL 3D SETTINGS OPTIONS 3D 3D INVERT 3D STRUCTURE OFF OFF FRAME PACKING SELECT COMPUTER EXIT MOVE MOVE  "3D INVERT" and "3D STRUCTURE"only available when 3D is enabled.  Compatible 3D source, 3D content and active shutter
  • NEC NP-VE303 | Users Manual - Page 54
    STRUCTURE AUTO FRAME PACKING TOP-AND-BOTTOM SIDE-BY-SIDE FRAME SEQUENTIAL TIP: 3D supported signal • For PC Signal : 800x600@60/120Hz 1024x768@60/120Hz 1280x720@60Hz (Top and Bottom) 1280 x 720@50/60/59.94* (*Select manually) 1080p (Top and Bottom) 1920 x [email protected]/24 1080i (Side by Side (Half))
  • NEC NP-VE303 | Users Manual - Page 55
    User Controls SETTINGS | GENERAL IMAGE GENERAL SCREEN SIGNAL SETTINGS OPTIONS ADVANCED LANGUAGE ORIENTATION HDMI SETTINGS MUTE VOLUME ENGLISH DESKTOP REAR OFF SELECT COMPUTER EXIT MOVE MOVE LANGUAGE Choose the multilingual OSD menu. Press the or button into the sub menu and then use the
  • NEC NP-VE303 | Users Manual - Page 56
    . The image will appear reversed in upside down position. ORIENTATION DESKTOP FRONT DESKTOP REAR CEILING FRONT CEILING REAR  "HDMI SETTINGS" is only supported under HDMI source. HDMI SETTINGS Use this feature to set HDMI. HDMI SETTINGS HDMI VIDEO LEVEL AUDIO SELECT AUTO HDMI SELECT COMPUTER
  • NEC NP-VE303 | Users Manual - Page 57
    User Controls MUTE  Choose "ON" to turn mute on.  Choose "OFF" to turn mute off. MUTE OFF ON VOLUME  Press the button to decrease the volume.  Press the button to increase the volume. VOLUME EXIT EXIT ADJUST English ... 50
  • NEC NP-VE303 | Users Manual - Page 58
    User Controls SETTINGS | SIGNAL  "SIGNAL" is only supported in Analog VGA (RGB) signal. IMAGE GENERAL SCREEN SIGNAL PHASE CLOCK H. POSITION V. POSITION SELECT COMPUTER EXIT SETTINGS OPTIONS ADVANCED MOVE MOVE PHASE Synchronize the signal
  • NEC NP-VE303 | Users Manual - Page 59
    User Controls V. POSITION  Press the button to move the image down.  Press the button to move the image up. V. POSITION EXIT EXIT ADJUST English ... 52
  • NEC NP-VE303 | Users Manual - Page 60
    the NEC logo. LOGO OFF ON  The closed caption is not available under the following conditions: - when messages or menus are displayed. - when an image is frozen. - when [V KEYSTONE] setting is not zero or [ASPECT RATIO] setting is not [AUTO] or [4:3].  The projector does not support optional
  • NEC NP-VE303 | Users Manual - Page 61
    User Controls SECURITY  OFF: Choose "OFF" to be able to switch on the projector without password verification.  ON: Choose "ON" to use security verification when turning on the projector. SECURITY OFF ON  The available test pattern is GRID. SECURITY KEYWORD ENTER CURRENT SECURITY CODE INVALID
  • NEC NP-VE303 | Users Manual - Page 62
    SELECT EXIT OFF MOVE ADJUST  The default password is puqt (first time). SECURITY TIMER Use this function to set how long (MONTH/DAY/HOUR) the projector can be used. Once this time has elapsed you will be requested to enter your password again. SECURITY TIMER MONTH DAY HOUR EXIT EXIT MOVE
  • NEC NP-VE303 | Users Manual - Page 63
    CONFIRM NEW SECURITY CODE ENTER EXIT 5. Enter the new password again and press ENTER to confirm.  If the incorrect password is entered 3 times, the projector will automatically shut down. (When turn on the projector.)  If you have forgotten your password, please contact your local office for
  • NEC NP-VE303 | Users Manual - Page 64
    ™ RESET OFF AUTO OFF OFF BLUE SELECT COMPUTER EXIT MOVE OPTIONS MOVE INPUT SEARCH  ON: The projector will search for other signals if the current input signal is lost.  OFF: The projector will only search current input connection. INPUT SEARCH OFF ON INPUT Use this option to enable / disable
  • NEC NP-VE303 | Users Manual - Page 65
    variable speed according to the internal temperature.  H IGH ALTITUDE: The built-in fans run at high speed. Select this option when using the projector at altitudes approximately 2500 feet/760 meters or higher. FAN MODE AUTO HIGH ALTITUDE INFORMATION HIDE  ON: Choose "ON" to hide the info message
  • NEC NP-VE303 | Users Manual - Page 66
    User Controls  (*) Except "LANGUAGE", "LOGO", "SECURITY", "FAN MODE", "BACKGROUNDCOLOR", "LAMPLIFEREMAINING", and "LAMP HOURS USED". RESET Choose "YES" to return the display parameters on all menus to the factory default settings. (*) ARE YOU SURE ? YES NO 59 ... English
  • NEC NP-VE303 | Users Manual - Page 67
    EXIT MOVE OPTIONS MOVE LAMP LIFE REMAINING Showing the Lamp life. LAMP HOURS USED Display the projection time. ECO MODE Choose "ECO" to dim the projector lamp which will lower power consumption and extend the lamp life. Choose "OFF" to return to normal mode. ECO MODE OFF ECO English ... 60
  • NEC NP-VE303 | Users Manual - Page 68
    User Controls LAMP LIFE REMINDER Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear when the lamp has reached the end of its life. LAMP LIFE REMINDER OFF ON USE THE SPECIFIED LAMP FOR SAFETY AND PERFORMANCE. ARE YOU
  • NEC NP-VE303 | Users Manual - Page 69
    OPTIONS | INFORMATION IMAGE INFORMATION SCREEN SETTINGS ADVANCED MODEL NO. SERIAL NUMBER SOURCE RESOLUTION SOFTWARE VERSION CONTROL ID OPTIONS SELECT COMPUTER EXIT MOVE MOVE INFORMATION To display the projector information for model no., serial number, source, resolution, software version
  • NEC NP-VE303 | Users Manual - Page 70
    ON AUTO POWER OFF (MIN) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). AUTO POWER OFF (MIN) EXIT EXIT ADJUST OFF TIMER (MIN) Sets the
  • NEC NP-VE303 | Users Manual - Page 71
    to reuse the control panel. Press and hold the EXIT button on the projector cabinet for about 10 seconds to turn off "CONTROL PANEL LOCK". CONTROL PANEL OFF ON CONTROL ID Use this feature to display the ID number of the projector when the "ID SET" button is pressed on the remote control. CONTROL
  • NEC NP-VE303 | Users Manual - Page 72
    Appendices Troubleshooting  If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local dealer or service center. Problem: No image appears on screen  Ensure all the cables and power connections are correctly and securely
  • NEC NP-VE303 | Users Manual - Page 73
    the SP box; choose the resolution mode you need under the "Models" box.  If you are using a Notebook: 1. First the external display to come on or off. For example, NEC notebook PCs use Fn + F3, while Dell notebook PCs use all equipment including the projector. English ... 66 Problem: The screen of
  • NEC NP-VE303 | Users Manual - Page 74
    lens.  Make sure the projection screen is between the required distance from the projector. Please see pages 31-32). Problem: The image is stretched when displaying 16:9 DVD The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default
  • NEC NP-VE303 | Users Manual - Page 75
    Appendices Problem: LED Indicator message POWER LED Indicator Indicator Condition Off Projector Condition The main power is off. Blinking GREEN light 0.5sec ON / 0.5sec OFF 2.5sec ON / 0.5sec OFF ORANGE 0.5sec ON / 0.5sec OFF Steady GREEN light RED The projector is getting ready to turn
  • NEC NP-VE303 | Users Manual - Page 76
    Indicator Condition Off Blinking RED light 0.5sec ON / 0.5sec OFF Steady RED light GREEN Projector Condition Note Normal Condition -- Lamp has reached its end -of life. Lamp has been used beyond The projector will not its limit. turn on until the lamp is replaced. [ECO MODE] is
  • NEC NP-VE303 | Users Manual - Page 77
    Appendices Problem: Message Reminders  Over temperature - the projector has exceeded its recommended HELP button on the remote control at least 10 seconds. This will allow you to turn on the projector. Clear the lamp hours by selecting "OPTIONS" -> "LAMP SETTINGS" -> "CLEAR LAMP HOURS" from
  • NEC NP-VE303 | Users Manual - Page 78
    the lamp! Replacing the lamp Optional lamp (NP40LP) The projectors will detect the lamp life at 4500 hours in ECO Mode When the POWER LED indicator flashes red and the message below displays on screen, the projector has detected that the lamp is approaching its end of life. Please see page 68
  • NEC NP-VE303 | Users Manual - Page 79
    module. Lamp Replacing Procedure: 1. Switch off the power to the projector by pressing the "POWER OFF" button on the remote control or the button on the control panel. 2. Allow the projector to cool down at least 60 minutes. 3. Disconnect the power cord. 4. 
  • NEC NP-VE303 | Users Manual - Page 80
    do not wipe the lens hard because that may cause serious damage on the lens surface. • Wiping might scratch the lens. Optical performance of the projector will thus be impacted if the lens is scratched after wiping. Optical performance impact will be dependent on the scratch condition on it. • Do
  • NEC NP-VE303 | Users Manual - Page 81
    Appendices Specifications Optical NP-VE303 NP-VE303X Projection System 0.55" SVGA DMD 0.55" XGA DMD Resolution (pixels) *1 800x600 (SVGA) 1024x768 (XGA) Manual zoom and manual focus Lens F=2.41 - 2.55 mm f=21.8 - 24.0 mm @ 60" Lamp 195W (160W in ECO mode) Light Output *2 *3 3000lm
  • NEC NP-VE303 | Users Manual - Page 82
    NP-VE303 NP-VE303X Inputs 1 x VGA and Y/Pb/Pr, 1 x HDMI *4 (Standard HDMI connector), 1 x Audio (Stereo mini jack), 1 x Composite Video (RCA (yellow)) PC Control 1 x PC Control Port (D-Sub 9 Pin) Service , this does not necessarily mean the projector is not functioning properly. With the
  • NEC NP-VE303 | Users Manual - Page 83
    be displayed with scaling technology. NP-VE303X: An image with higher or lower resolution than the projector's native resolution (1024 × 768) will be displayed with scaling technology. *6 100-130VAC *7 200V-240VAC Mechanical NP-VE303 NP-VE303X Installation Orientation Desktop/Front, Desktop
  • NEC NP-VE303 | Users Manual - Page 84
    Appendices Compatibility Modes  VGA Analog (1) VGA Analog - PC Signal Modes VGA VGA VGA VGA SVGA SVGA SVGA SVGA SVGA XGA XGA XGA XGA XGA+ SXGA SXGA SXGA SXGA Quad VGA Quad VGA SXGA+ UXGA Mac OS X Mac OS X Mac OS X Mac OS X Mac OS X Mac OS X Resolution (dots) 640x480 640x480 640x480 640x480
  • NEC NP-VE303 | Users Manual - Page 85
    Appendices (2) VGA Analog - Extended Wide timing Modes HD WXGA WXGA WXGA WXGA WXGA WXGA+ WSXGA Full HD WUXGA Resolution (dots) 1280x720 1280x768 1280x768 1280x768 1280x800 1366x768 1440x900 1680x1050 1920x1080 1920x1200 V.Frequency [Hz] 60 60 75 85 60 60 60 60 60 60 H.Frequency [KHz] 44.8 47.78
  • NEC NP-VE303 | Users Manual - Page 86
    /24/50/59.94/60 50/59.94/60 50/59.94/60 59.94/60 50 59.94/60 50 *1 XGA Model Real Resolution *2 SVGA Model Real Resolution *3 The projector may fail to display these signals correctly when [AUTO] is selected for [ASPECT RATIO] in the on-screen menu. The factory default
  • NEC NP-VE303 | Users Manual - Page 87
    :9 23.98/24 16:9 50/60/59.94 16:9 50/60/59.94 *3 16:9 50/60/59.94 16:9 23.98/24 *1 1024x768 for XGA Model Real Resolution / 800x600 for SVGA Model Real Resolution *2 The 120 Hz signals are support frame sequential format only. *3 Select manually. English ... 80
  • NEC NP-VE303 | Users Manual - Page 88
    invalidate the warranty. 57.89 (2.28") Warning: 1. Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector. 2. Avoid installing the projector near a heat source. 4-M4*L8 (Max) for Ceiling Mount 142.00 (5.59") Unit: mm (inch) 142.00 (5.59") 84.00 (3.31") 116.00
  • NEC NP-VE303 | Users Manual - Page 89
    Appendices Cabinet Dimensions Unit: mm (inch) 250.00 (9.84") 43.41 (1.71") 57.89 (2.28") 59.00 (2.32") 324.00 (12.76") 103.00 (4.06") English ... 82 88.00 (3.46") 91.50 (3.60") 9.80 (0.39")
  • NEC NP-VE303 | Users Manual - Page 90
    Appendices Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector 11 12 13 14 15 6 7 8 9 10 12345  Pin No. 12 and 15 are required for DDC/CI. Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RGB Signal (
  • NEC NP-VE303 | Users Manual - Page 91
    Appendices PC Control Codes and Cable Connection PC Control Codes Function Code Data POWER ON 02H 00H 00H 00H 00H 02H POWER OFF 02H 01H 00H 00H 00H 03H INPUT SELECT COMPUTER 02H 03H 00H 00H 02H 01H 01H 09H INPUT SELECT HDMI 02H 03H 00H 00H 02H 01H A1H A9H INPUT
  • NEC NP-VE303 | Users Manual - Page 92
    service personnel, check the following list to be sure repairs are needed also by referring to the "Troubleshooting" section in your user's manual. This checklist below will help us solve your problem Management is turned off (only models with the Power Management function). supported by the projector
  • NEC NP-VE303 | Users Manual - Page 93
    your problem in detail. Information on application and environment where your projector is used Projector Model number Projector Signal cable NEC standard or other manufacturer's cable? Model number: Length: inch/m Distribution amplifier Model number: Switcher Model number: Adapter Model
  • NEC NP-VE303 | Users Manual - Page 94
    States, Canada, and Mexico) Please take time to register your new projector. This will activate your limited parts and labor warranty and InstaCare service program. Visit our web site at www.necdisplay.com, click on support center/register product and submit your completed form online. Upon receipt
  • NEC NP-VE303 | Users Manual - Page 95
    NEC Display Solutions, Ltd. 2015 7N952291
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Projector
VE303/VE303X
User’s Manual
Model No.
NP-VE303/NP-VE303X