NEC NP610 NP215 : NP01UCM spec brochure

NEC NP610 - XGA LCD Projector Manual

Get NEC NP610 - XGA LCD Projector PDF manuals and user guides
UPC - 805736031157
View all NEC NP610 manuals
Add to My Manuals
Save this manual to your list of manuals

NEC NP610 manual content summary:

  • NEC NP610 | NP215 : NP01UCM spec brochure - Page 1
    NEC DISPLAY SOLUTIONS OF AMERICA, INC. Ceiling Mount Model: NP01UCM Maximum Load Capacity: 50 lb (22.7 kg) Read instruction sheet before you start installation and assembly. WARNING • Make sure that the supporting surface will safely support Adapter Plate to Projector ...8 Visit the Peerless
  • NEC NP610 | NP215 : NP01UCM spec brochure - Page 2
    Before you start check the parts list to insure all of the parts shown are included. Parts List Description Qty. A ball and socket mount 1 B 4 mm security allen wrench 1 C M5 x .8 x 10 mm socket pin type F screw 1 D #10-32 x 3/8" spade thumb screw 1 E #10-32 x 3/8" serrated washer head
  • NEC NP610 | NP215 : NP01UCM spec brochure - Page 3
    Chart for NEC Projectors Manufacturer NEC NEC NEC NEC NEC Model LT280 LT380 NP110 NP215 NP300 NEC NEC NEC NEC NEC NEC NEC NP310 NP400 NP410 NP410W NP500 NP500W NP500WS NEC NEC NEC NEC NEC NEC NEC NP510 NP510W NP510WS NP600 NP600S NP610 NP610S NEC NEC NEC NEC NEC NEC NEC NP901W NP905
  • NEC NP610 | NP215 : NP01UCM spec brochure - Page 4
    mm) socket wrench. Skip to step 2. WOOD JOIST CEILING WARNING • It is the responsibility of the installer to verify that the G supporting surface will safely support the combined load of all attached hardware and components. IMPORTANT: Be sure to drill holes into the joist CENTER! F F WOOD
  • NEC NP610 | NP215 : NP01UCM spec brochure - Page 5
    specifications. • Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor. • Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard- ware and components. • Never exceed the Maximum Load Capacity of
  • NEC NP610 | NP215 : NP01UCM spec brochure - Page 6
    Flush Mount Application 1 Screw ball and socket mount (A) into ceiling plate (G). Align the notch with one of the four holes of the ceiling plate (G) and secure ball and socket mount (A) with a M5 x 10 mm socket pin screw (C) using security allen wrench (B) as shown in detail 1. NOTE: Slotted set
  • NEC NP610 | NP215 : NP01UCM spec brochure - Page 7
    Installation to Extension Column 2 Screw extension column to ceiling plate (G). Align the notch with one of the four holes in the ceiling plate (G) and secure extension column with a M5 x 10 mm socket pin screw (C) using security allen wrench (B). See detail 4. Screw extension column connector (I)
  • NEC NP610 | NP215 : NP01UCM spec brochure - Page 8
    screws for mounting. Use a combination of screws (M, N, O, or P) and foot adjustment that will result in channels of adapter plate (L) fitting tightly against projector. Important: In order to properly engage the threads in the mounting holes, the screw must be turned at least 3 full turns. NOTE: If
  • NEC NP610 | NP215 : NP01UCM spec brochure - Page 9
    WARNING • Do not lift more weight than you can handle! Use additional man power or mechanical lifting equipment to safely handle placement of the projector! Visit the Peerless Web Site at www.peerlessmounts.com 9 of 9 ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 For customer care call 1-800
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
ISSUED: 04-11-06
SHEET #: 055-9458-6
09-25-09
Visit the Peerless Web Site at www.peerlessmounts.com
1 of 9
For customer care call 1-800-729-0307 or 708-865-8870.
±²³´µ¶·¸¹º»´·¼¹½¾¶¼±·´¼¿´ºÀ²Á¶³ºÂ´¶±³Ã
Read instruction sheet before you start installation and assembly.
Maximum Load Capacity: 50 lb (22.7 kg)
IMPORTANT! Be sure not to touch the projector while tightening the set screw on the
ball and socket mount. This may cause the image to be unaligned when you let go.
IMPORTANT!
Turn to the appropriate page for your ceiling installation.
•
Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and
components.
WARNING
Model:
NP01UCM
Installation and Assembly - Universal
Ceiling Mount
Table of Contents
Parts List
..............................................................................................................................................................................
2
To Wood Joist Finished Ceilings, Exposed Wood Joists or Wood Beam Ceilings
................................................................
4
To Concrete Ceilings
.............................................................................................................................................................
5
Flush Mount
..........................................................................................................................................................................
6
Extension Column
................................................................................................................................................................
7
Attaching Universal Adapter Plate to Projector
.....................................................................................................................
8