NEC UN552VS User Manual English

NEC UN552VS Manual

Get NEC UN552VS PDF manuals and user guides View all NEC UN552VS manuals
Add to My Manuals
Save this manual to your list of manuals

NEC UN552VS manual content summary:

  • NEC UN552VS | User Manual English - Page 1
    User's Manual Large Format Display MultiSync UN462A MultiSync UN462VA MultiSync UN492S MultiSync UN492VS MultiSync UN552A MultiSync UN552S MultiSync UN552VS MODEL: UN462A, UN462VA, UN492S, UN492VS, UN552A, UN552S, UN552VS The model name and serial number can be found in the rating label on the rear
  • NEC UN552VS | User Manual English - Page 2
    Important Information 2 Safety Precautions, Maintenance & Recommended Use 3 Safety Precautions and Maintenance 3 Recommended Use 3 Cleaning the LCD Panel 4 Cleaning the Cabinet 4 Features Chapter 1 Installation Setup Overview 7 Mounting 9 Mounting location 12 Orientation 12 Ventilation
  • NEC UN552VS | User Manual English - Page 3
    ID Function 74 Chapter 7 External Control Connecting Interfaces 77 Commands 77 Supporting HDMI CEC Command 79 Controlling the Monitor via RS-232C 80 Controlling 89 Proof of Play 90 Chapter 8 Troubleshooting Screen Image and Video Signal Issues 92 Hardware Issues 93 Image Persistence 95
  • NEC UN552VS | User Manual English - Page 4
    Specifications UN462A 97 UN462VA 98 UN492S 99 UN492VS 100 UN552A 101 UN552S 102 UN552VS 103 Appendix A External Resources Appendix B OSD Controls List INPUT 107 PICTURE Appendix C Manufacturer's Recycling and Energy Information Disposing of your old NEC product 131 Energy Saving 131
  • NEC UN552VS | User Manual English - Page 5
    Lesser General Public License (LGPL), and others. For more information on each software, see "readme.pdf" inside the "about GPL&LGPL" folder on the NEC website.  NOTE: (1) The contents of this user's manual may not be reprinted in part or whole without permission. (2) The contents of this user
  • NEC UN552VS | User Manual English - Page 6
    in order to avoid any problems.  CAUTION: Please use the not supplied with this equipment, please contact NEC. For all other cases, please use 220 100 * When operating the MultiSync monitor with its AC 125-  NOTE: This product can only be serviced in the country where it was purchased. Use
  • NEC UN552VS | User Manual English - Page 7
    with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer from the wall outlet and refer servicing to qualified service personnel: • If the power supply does not operate normally by following operating instructions. *1: The product you purchased may not
  • NEC UN552VS | User Manual English - Page 8
    with a lint-free, nonabrasive cloth. Avoid using any cleaning solution or glass cleaner! • Please do not rub the LCD panel with a hard or abrasive material. • Please do not apply pressure to the LCD panel surface. • Please do not use OA cleaner as it will cause deterioration or discoloration on the
  • NEC UN552VS | User Manual English - Page 9
    customized settings. HDR video is also supported. - NEC Display Wall Calibrator (NDWC) and MultiProfiler supported Multiple color modes can be easily by compensating for variations in luminance and color that are inherent to LCD panels. - Stand-alone calibration (see page 51) This function updates
  • NEC UN552VS | User Manual English - Page 10
    cannot be used or installed without the Tabletop Stand or other mounting accessory for support. For proper installation it is strongly recommended to use a trained, NEC authorized service person. Failure to follow NEC standard mounting procedures could result in damage to the equipment or injury to
  • NEC UN552VS | User Manual English - Page 11
    is used in an enclosed area or if the LCD panel is covered with a protective screen, please indications inside the case. 3. Replace the cover. NEC recommends the following battery use:  CAUTION: Incorrect making connections. • Refer to the user's manual of your equipment for further information. 
  • NEC UN552VS | User Manual English - Page 12
    on page 99, "UN492VS" on page 100, "UN552A" on page 101, "UN552S" on page 102 and "UN552VS" on page 103). Screw Clamp  WARNING: • Please refer to the "Important Information" section of this user's manual for proper selection of an AC power cord. • Fully insert the prongs into the power outlet
  • NEC UN552VS | User Manual English - Page 13
    equipment. If a problem is detected, please refer to qualified personnel for service. • Regularly check the mounting location for signs of damage or weakness that may occur over time. DO NOT block ventilated openings with mounting accessories or other accessories. For NEC Qualified Personnel
  • NEC UN552VS | User Manual English - Page 14
    can fix each monitor position with pins. When you use pins, please refer to the instructions below. 1. Connect all vertical position monitors using pins. 2. Connect each vertical monitor using pins. For UN552S/UN552VS: • Please locate the spacer at the edge of rear side monitor. • Attach it by using
  • NEC UN552VS | User Manual English - Page 15
    be properly installed. • When installing, do not apply pressure to the LCD panel or excessive force to any part of the monitor by pushing or or ceiling strong enough to support the monitor. • To prevent the monitor from falling off from the wall or ceiling, NEC strongly recommends using a safety
  • NEC UN552VS | User Manual English - Page 16
    Mounting location  CAUTION: • The ceiling or wall must be strong enough to support the monitor and mounting accessories. • DO NOT install in locations where a door or gate can hit the unit. • DO NOT install in areas where the
  • NEC UN552VS | User Manual English - Page 17
    ; especially when you use monitors in a multiple screen configuration. Mounting on ceilings  CAUTION: • Ensure that the ceiling is strong enough to support the weight of the unit and the mounting equipment over time, against earthquakes, unexpected vibrations, and other external forces. • Be sure
  • NEC UN552VS | User Manual English - Page 18
    place the monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily support the weight of the monitor. *1: UN552A/UN552S/UN552VS: WM-55UN-L or WM-55UN-P. UN492S/UN492VS: WM-49UN-L. UN462A/UN462VA: WM-46UN-L3 or WM-46UN-P2. Using a Wall Mount
  • NEC UN552VS | User Manual English - Page 19
    fingers. For installation, follow the instructions included with the stand or mounting equipment UN492S/ UN492VS and the ST-5220 for the UN552A/UN552S/UN552VS. • UN492S/UN492VS: DO NOT use this monitor on a wall using a cord or chain that can support the weight of the monitor in order to prevent
  • NEC UN552VS | User Manual English - Page 20
    monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily support the weight of the monitor.  NOTE: To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor's screen area, on the table
  • NEC UN552VS | User Manual English - Page 21
    Depending on the type of the monitor, there are limitations for mounting. For installation, follow instructions below to avoid damage to the monitor. For the UN462A/UN462VA/UN552A: • When installing front edge.  NOTE: For the UN552S/UN552VS: • Please use double-sided tape only.  English−17
  • NEC UN552VS | User Manual English - Page 22
    Chapter 2 Parts Name and Functions This Chapter Includes: >> "Control Panel" on page 19 >> "Terminal Panel" on page 20 >> "Wireless Remote Control (Optional)" on page 22 English−18
  • NEC UN552VS | User Manual English - Page 23
    English Control Panel A Button (power button) Switches between power on and standby. See page 33. B MUTE Button Switches the audio mute on/off. C INPUT/SET Button INPUT: Cycles through the available inputs when the OSD menu is turned off. See page 26 and page 28. [DVI], [HDMI1], [HDMI2], [
  • NEC UN552VS | User Manual English - Page 24
    IN (DVI-D) Digital RGB signals input from a computer or HDTV device having a digital RGB output. See page 116.  NOTE: This connector does not support analog input. J RS-232C IN (D-Sub 9-pin) Connect RS-232C input from external equipment, such as a computer, in order to control RS-232C functions
  • NEC UN552VS | User Manual English - Page 25
    on page 31. USB1 (SENSOR): Downstream port (USB Type-A). USB2: Upstream port (USB Type-B). USB CM1 (2A): Power supply port. USB CM2*1: Service port. Please do not connect devices. Media Player USB: USB storage device reader for use with the Media Player. *1: USB functionality is available
  • NEC UN552VS | User Manual English - Page 26
    Button Increases or decreases the audio output level. N CH/ZOOM +/- Button* Increases or decreases the point zoom level. Please refer to the Point Zoom instructions. See page 37. *: When using with an Option Board, the function depends on which Option board is installed in the monitor. English−22
  • NEC UN552VS | User Manual English - Page 27
    English O GUIDE Button For use with an Option Board. The function depends on which Option Board is installed in the monitor. P MUTE an Option Board, the function depends on which Option Board is installed in the monitor. Refer to the Option Board's user's manual for further information. English−23
  • NEC UN552VS | User Manual English - Page 28
    making connections: • Turn off the device's power before connecting it to the monitor. • Refer to the device's user manual for available connection types and instructions for the device. • We recommend turning off the monitor's main power before connecting or disconnecting a USB storage device or
  • NEC UN552VS | User Manual English - Page 29
    English Wiring Diagram USB cable USB port (Type-A) USB port (Type-B) Computer (USB)*1 Stereo Amplifier USB1 (SENSOR) USB2 USB CM1 (2A) USB CM2 VCR Player or DVD Player (Video) USB devices such as a USB camera, USB storage device or USB color sensor Devices that require power supply: Ex:
  • NEC UN552VS | User Manual English - Page 30
    . The following table shows the typical factory preset signal timing for each connection type. Some display cards may not be able to support the required resolution for proper image reproduction with the selected connection. The monitor will show the proper image by automatically adjusting the
  • NEC UN552VS | User Manual English - Page 31
    of digital rights management that prevents highdefinition content, in Blu-ray discs, DVDs and streaming media, from being copied or broadcast illegally.  NOTE: • Supports 1920x1080 (60 Hz), 1080p, 1080i, 720p@50Hz/60Hz, 576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz, 3840x2160 (30Hz/24Hz/25Hz [MODE1
  • NEC UN552VS | User Manual English - Page 32
    CEC Command" on page 79. When supported, the monitor's optional Remote Control can be used to control the HDMI media device. The remote's CEC enabled buttons are: 1 (9), 2 (4), 3 (:), 5 (
  • NEC UN552VS | User Manual English - Page 33
    a microSD memory card in the FAT32 format or FAT16 format. Refer to the computer's instruction manual or help file on how to format a microSD memory card.  NOTE: Up to 32GB microSDHC is supported. The monitor is not guaranteed to work with all microSD memory cards sold commercially. microSD
  • NEC UN552VS | User Manual English - Page 34
    Refer to the computer's instruction user's manual or Help file on how to format a USB storage device. Please use a USB storage device with this monitor in accordance with the drawing below. If the physical size of the USB storage device is larger than the supported NEC
  • NEC UN552VS | User Manual English - Page 35
    connected device. Make sure to use a USB cable that supports 2 A. Enable [USB POWER] in the [USB] settings Module. See page 104. USB CM2*: Service port. Please do not connect devices. USB function may not work. Please check the user's manual of your computer or device. • Before turning off the
  • NEC UN552VS | User Manual English - Page 36
    Chapter 4 Basic Operation This Chapter Includes: >> "Power ON and OFF Modes" on page 33 >> "Operating Range for the Optional Remote Control" on page 34 >> "Using Power Management" on page 34 >> "Showing the Information OSD" on page 35 >> "Switching Between Picture Modes" on page 35 >> "Setting the
  • NEC UN552VS | User Manual English - Page 37
    English Power ON and OFF Modes Press the button on the Control Panel or POWER ON button on the Remote Control to turn on the monitor. The monitor's power LED indicates the current status of the monitor. Please refer to the following table for information about the LED indicator. LED indicator
  • NEC UN552VS | User Manual English - Page 38
    automatically if the keyboard or mouse are not used during the time set in the computer's power management settings. Refer to your computer's user manual for more information. When connected to an AV source, such as a Blu-ray, DVD, or streaming video player, power consumption by the monitor reduces
  • NEC UN552VS | User Manual English - Page 39
    SpectraView Engine picture modes from 1 to 5. The picture modes are pre-configured with settings for general use. See "Advanced Color Adjustment" on page 48 for instructions on changing the picture mode settings. English−35
  • NEC UN552VS | User Manual English - Page 40
    Setting the Aspect Ratio Press the ASPECT button on the remote control to cycle through the options available for the current input signal. For MP (Media Player), VIDEO • FULL ➙ ZOOM ➙ NORMAL For DVI, DisplayPort1, DisplayPort2, VGA (RGB), OPTION*1, COMPUTE MODULE*2 • FULL ➙ 1:1 ➙ ZOOM ➙ NORMAL *1:
  • NEC UN552VS | User Manual English - Page 41
    English Using Point Zoom The [POINT ZOOM] function increases the image size and expands it horizontally and vertically simultaneously. The image can be increased up to 10 times its size. 1. Press the SET/POINT ZOOM button on the remote control. A magnifier icon appears on-screen. 2. Move the
  • NEC UN552VS | User Manual English - Page 42
    Module Interface Board and Raspberry Pi Compute Module are installed. Adjustment Settings Select Press  or  to navigate to a sub-menu. Goto Adjustment Key Guide Press SET/POINT ZOOM to select an option. Return Close Press  or , + or - to select the function or setting to be adjusted. Press
  • NEC UN552VS | User Manual English - Page 43
    is located in "OSD Controls List" on page 106. INPUT: Select the input signal source. PICTURE: Select one of the default picture modes, manually adjust the color settings, enable or disable SpectraView Engine, and adjust the aspect ratio, image flip, and rotation. AUDIO: Adjust volume, balance
  • NEC UN552VS | User Manual English - Page 44
    stored on a microSD memory card or USB storage device. The Media Player plays videos, still images and background music (BGM). See page 31 for instructions on connecting USB storage device or microSD memory card. Change to the Media Player by pressing the MEDIA PLAYER button on the optional remote
  • NEC UN552VS | User Manual English - Page 45
    English File Display Screen RETURN Icon display Goes back one level higher. PAGE UP PAGE DOWN SETTINGS Displays the previous set of files in the folder. Displays the next set of files in the folder. Shows the settings screen for configuring the Media Player. THUMBNAILS/ ICON SORT EJECT ENT
  • NEC UN552VS | User Manual English - Page 46
    deselect it. 3. Navigate to the first file you want to display then press the SET/POINT ZOOM button on the remote control. This starts the manual slideshow and the selected file will be displayed on-screen. To change the image press the the remote control to display the next file in
  • NEC UN552VS | User Manual English - Page 47
    English Configuring the Slideshow Settings Use the  + - and SET/POINT ZOOM buttons on the remote control to navigate the Media Player menus. 1. Navigate to the SETTINGS icon and press SET/POINT ZOOM button. 2. Navigate to [PLAY MODE] and press SET/POINT ZOOM button. 3. Select [AUTO] and press
  • NEC UN552VS | User Manual English - Page 48
    monitor's main power switch should be off before making connections. • Only one USB storage device can be recognized with this monitor. External hub is not supported with this monitor. English−44
  • NEC UN552VS | User Manual English - Page 49
    MP3) AAC-LC (Abbreviation: AAC), LPCM MP3, WMV Standard, WMA 9/10 Professional MP3, AAC MP3, AAC MP3, AAC BGM (Background Music) - Supported formats File extension .wav .mp3 Audio codec LPCM MP3 Additional Information Item Resolution Video bit date Audio sampling rate Audio bit rate Conditions
  • NEC UN552VS | User Manual English - Page 50
    Chapter 5 Advanced Operation This Chapter Includes: >> "Creating a Power Schedule" on page 47 >> "Advanced Color Adjustment" on page 48 >> "Multi-Picture Mode" on page 55 >> "Setting Security and Locking the Monitor Controls" on page 59 >> "Media Player Settings" on page 63 English−46
  • NEC UN552VS | User Manual English - Page 51
    English Creating a Power Schedule The schedule function allows the monitor to automatically change between power on and standby modes at different times. To program the schedule: 1. Enter the [SCHEDULE] menu. a Highlight [SCHEDULE SETTINGS] using the  and  buttons. b Press the SET/POINT ZOOM or
  • NEC UN552VS | User Manual English - Page 52
    Advanced Color Adjustment The SpectraView Engine (SVE) is a custom color processor engine integrated in the monitor. It combines individual characterization and calibration of the monitor during production together with temperature and time monitoring, to provide an unparalleled level of color
  • NEC UN552VS | User Manual English - Page 53
    with "on set shooting" where the monitor's screen will be captured by the camera and should match the studio set's incandescent lighting. Native LCD panel color gamut. Suitable for use with color managed applications. Color setting for medical imaging that conforms to DICOM GSDF (Grayscale Standard
  • NEC UN552VS | User Manual English - Page 54
    to display, the OSD characters are changed to green. Allows you to manually select the brightness level of grayscale. sRGB: Gamma setting for sRGB. L . Programmable: A programmable gamma curve can be loaded using optional NEC software. Custom: Set a custom value for Peak luminance. CUSTOM
  • NEC UN552VS | User Manual English - Page 55
    . SAMPLE OF RGB GAMUT SETTING 0.9 LCD NATIVE GAMUT 0.8 GREEN GREEN MODIFIED SETTING of cd/m2. Measurements are taken manually and each reading must be entered color sensor models and types are not supported.  NOTE: • For best calibration this feature with the NEC MDSVSENSOR3 color sensor.
  • NEC UN552VS | User Manual English - Page 56
    the OSD window. Follow the instructions on the OSD message. STAND- measurements taken using a supported color sensor device. These near-range colorimeter device, measurements must be taken manually with the device and the CIE Y/x/y values . If you are using NEC display Wall Calibrator, uniformity
  • NEC UN552VS | User Manual English - Page 57
    English White copy* This function can be used to "copy" the luminance and white point from another monitor when used in a multi-monitor installation. This process is done by measuring the color of a monitor and setting those measured values into the monitor being adjusted. This can be useful in
  • NEC UN552VS | User Manual English - Page 58
    , the white point can be adjusted using familiar red, green and blue level controls. To turn SpectraView Engine off, see page 48 for instructions. There are different picture modes available when the SpectraView Engine is off. These picture modes have also been configured with settings for general
  • NEC UN552VS | User Manual English - Page 59
    on the main video (Picture-In-Picture), or the two inputs can be viewed next to each other (Picture-By-Picture). The instructions in this section guide you through configuring Multi-Picture Mode in the monitor's OSD menu. These settings can also be configured using the monitor's web controls. The
  • NEC UN552VS | User Manual English - Page 60
    PBP (Picture-By-Picture) settings: 1. Navigate to [INPUT SELECT] on the OSD. • Select an input source for [PICTURE1] and [PICTURE2]. 2. Navigate to [ACTIVE PICTURE] on the OSD. • Select either [PICTURE1] or [PICTURE2]. The Picture Size, Position, and Aspect functions are configured separately for
  • NEC UN552VS | User Manual English - Page 61
    see the input you want to use for the sub picture, refer to the tables below to see if your inputs configuration is supported. DisplayPort = 1.1a/HDMI = MODE1 Main picture DisplayPort1 DisplayPort2 DVI HDMI1 HDMI2 VGA (RGB) VGA (YPbPr) VIDEO OPTION MP Sub picture DisplayPort1 DisplayPort2 DVI
  • NEC UN552VS | User Manual English - Page 62
    DisplayPort = 1.2/HDMI = MODE1 Main picture DisplayPort1 DisplayPort2 DVI HDMI1 HDMI2 VGA (RGB) VGA (YPbPr) VIDEO OPTION MP Sub picture DisplayPort1 DisplayPort2 DVI HDMI1 HDMI2 VGA (RGB) VGA (YPbPr) Video OPTION MP Connector DisplayPort1 (DAISY CHAIN IN) DisplayPort2 DVI-D HDMI1 (
  • NEC UN552VS | User Manual English - Page 63
    " on page 85 for the monitor's web controls. Settings Location The instructions in this section guide you through configuring security and locking functions in the monitor's OSD menu. will need to contact technical support to get a recovery password to access the monitor OSD menu. English−59
  • NEC UN552VS | User Manual English - Page 64
    Set a password for the monitor This step is only required if you want to change the password. MULTI-INPUT CONTROL: NETWORK INFORMATION LAN CHANGE PASSWORD SECURITY IR LOCK SETTINGS KEY LOCK SETTINGS DDC/CI OPTION C MODULE CURRENT PASSWORD: NEW PASSWORD: CONFIRM PASSWORD: 1. Using the remote
  • NEC UN552VS | User Manual English - Page 65
    English Locking the IR Remote Buttons The [IR LOCK SETTINGS] prevent the monitor from being controlled using the remote control. Enabling the [IR LOCK SETTINGS] does not lock the buttons the monitor control panel. MULTI-INPUT CONTROL: NETWORK INFORMATION LAN CHANGE PASSWORD SECURITY IR LOCK
  • NEC UN552VS | User Manual English - Page 66
    Locking the Control Panel Buttons The [KEY LOCK SETTINGS] prevent the monitor from being controlled using the buttons on the monitor Control Panel. Enabling the [KEY LOCK SETTINGS] does not lock the buttons on the remote control. MULTI-INPUT CONTROL: NETWORK INFORMATION LAN CHANGE PASSWORD SECURITY
  • NEC UN552VS | User Manual English - Page 67
    Slideshow Menu SCREEN SIZE PLAY MODE INTERVAL REPEAT AUDIO FILE BGM PLAY END SCREEN Function Selects [ACTUAL SIZE] or [BEST FIT]. Selects [AUTO] or [MANUAL]. Sets interval time. Check the check box to repeat slideshow. Selects an audio file. Check the check box to enable BGM. Selects a setting for
  • NEC UN552VS | User Manual English - Page 68
    is different than the IP address for the monitor. If you want to manually assign an IP address for the monitor, you will need to assign one see "Copying Files to the microSD memory card" on page 65 for instructions using the SHARED FOLDER function after enabling and configuring them in this screen
  • NEC UN552VS | User Manual English - Page 69
    English Shared Folder Settings This option allows you to access shared network folders, from within the Media Player, to copy files to the microSD memory card. Up to four folders can be added to the Shared Folder settings. See page 66. After opening the [SHARED FOLDER SETTINGS], select one of the
  • NEC UN552VS | User Manual English - Page 70
    Using CONTENTS COPY in the Media Player When using the CONTENTS COPY option, the microSD memory card will be erased then the files will be copied from the selected folder. Copying Files to the microSD memory card 1. Either connect a USB storage device to the Media Player USB port on the monitor, or
  • NEC UN552VS | User Manual English - Page 71
    English 5. When the computer or mobile device successfully connects to the Media Player, the Media Player's web controls are displayed in the browser. Select the SD-CARD VIEWER link on the left side of the browser window. 6. Press the Choose File button to open a file browser, then select a file.
  • NEC UN552VS | User Manual English - Page 72
    SD-CARD VIEWER Web Controls Buttons 1. CHOOSE FILE Choose File opens a file browser to select a file to copy to the microSD memory card. Pressing Open in the file browser shows the upload window displaying the selected file. Pressing OK starts the file upload.  NOTE: Please check the microSD
  • NEC UN552VS | User Manual English - Page 73
    has a Media Player, you can search from any monitor's main web controls to display all supported monitors on the network. 1. Input the monitor's IP address in the web browser's address field LAN or RS-232C. Instructions for the EMERGENCY CONTENTS can be found in the file called "External_Control
  • NEC UN552VS | User Manual English - Page 74
    Chapter 6 Multi-Monitor Setup This Chapter Includes: >> "Connecting Multiple Monitors" on page 71 >> "Video Out Connection" on page 73 >> "Setting the Remote Control ID Function" on page 74 English−70
  • NEC UN552VS | User Manual English - Page 75
    wall, when chained together. • [TILE MATRIX] - allows one image to be expanded and displayed over multiple screens (up to 100) through a distribution amplifier. Manually input the number of horizontal and vertical monitor in the video wall, position of the monitor in the wall, and turn on or off
  • NEC UN552VS | User Manual English - Page 76
    [AUTO] - Sets total delay value, each delay value is set automatically by setting of [H MONITORS], [V MONITORS] and [POSITION] in TILE MATRIX. [MANUAL] - Sets delay value to every monitors. • [V SCAN REVERSE] - Reverse scanning image direction to create a smooth motion image. ORIGINAL FRAME COMP
  • NEC UN552VS | User Manual English - Page 77
    either the HDMI1, DVI, MP, or OPTION input for the monitor to output a signal from HDMI OUT. • This monitor's signal output function supports contents protected by HDCP. HDCP content can be distributed across multiple connected monitors as described below: • HDCP 1: Up to 8 monitors / HDCP 2.2: Up
  • NEC UN552VS | User Manual English - Page 78
    is generally commercially produced Blu-rays and DVDs, television broadcast, and streaming media services. Setting the Remote Control ID Function The optional remote control can be used to control up to 100 individual MultiSync monitors using what is called the REMOTE CONTROL ID mode. The REMOTE
  • NEC UN552VS | User Manual English - Page 79
    English Use the remote control to operate a monitor that has a specific MONITOR ID number assigned to it. 1. Set the [MONITOR ID] number for the monitor (see page 120). The [MONITOR ID] number can range from 1-100. This [MONITOR ID] number allows the remote control to operate this specific monitor
  • NEC UN552VS | User Manual English - Page 80
    89 >> "Proof of Play" on page 90 Connecting external device There are two options to connect an external device to control the monitor. NEC Display Wall Calibrator or NaViSet Administrator allows you to control the monitor settings and get the monitor status, including calibration information. • RS
  • NEC UN552VS | User Manual English - Page 81
    support for controlling almost all monitor functions. • ASCII Control commands: This uses simple "English-like syntax" control commands using ASCII, for performing many common functions easily.  NOTE: The command formats for both types is explained in the external documents "External_Control.pdf
  • NEC UN552VS | User Manual English - Page 82
    30 30 32 03 0a 0d ASCII Control command This monitor supports control command, which is listed in the "External_Control.pdf" (See page 104), but also supports common ASCII control command, which is used for controlling the NEC monitor or projector from a connected PC. For further information please
  • NEC UN552VS | User Manual English - Page 83
    standby at the same time. If the monitor goes into standby while an HDMI CEC supported device is recording, the device remains on. Please refer to the user's manual supplied with the HDMI CEC supported device for further information. Use the  buttons to select [AUTO TURN OFF]. Use the + - buttons
  • NEC UN552VS | User Manual English - Page 84
    sent from a computer connected with an RS-232C cable, please use the control command. Instructions for the control command can be found in the Control Command Diagram (see page 77) or the "External_Control.pdf". See page 104. Interface PROTOCOL BAUD RATE DATA LENGTH PARITY STOP BIT FLOW CONTROL
  • NEC UN552VS | User Manual English - Page 85
    English PIN ASSIGNMENT RS-232C input/output Pin No 1 2 3 4 5 6 7 8 9 Name NC RXD TXD NC GND NC NC NC NC D-SUB 9P (Monitor side) 5 1 6 9 This monitor uses RXD, TXD and GND lines for RS-232C control. Controlling the Monitor via LAN Connecting to a Network Using a LAN cable allows you to
  • NEC UN552VS | User Manual English - Page 86
    together. Please execute AUTO ID/IP to automatically assign unique IDs to each monitor (see page 120) before trying to control a monitor by manually specifying the ID number. Master Monitor Connector IN OUT RS-232C REMOTE LAN1 (DAISY CHAIN IN) LAN2 (DAISY CHAIN OUT) Sub Monitors Connector
  • NEC UN552VS | User Manual English - Page 87
    is assigned automatically to the monitor. • NaViSet Administrator software for managing monitors over the network is recommended. It can be download from the NEC Display website (See page 104). • If the [MONITOR NETWORK SETTINGS] screen does not appear in the web browser, press the Ctrl+F5 keys
  • NEC UN552VS | User Manual English - Page 88
    Operation Access the following address to show HOME. http://
  • NEC UN552VS | User Manual English - Page 89
    an IP address for the monitor connected to the network. NOTE: Consult your network administrator if you have any trouble. Set your IP address for the monitor connected to the network when [MANUAL] is selected for [IP SETTING]. Set your subnet mask data for the monitor connected to the network when
  • NEC UN552VS | User Manual English - Page 90
    AUTO Reconfirm the settings in the [FAN CONTROL] in the [DISPLAY PROTECTION]. Or please contact your supplier. No signal Please check "No picture" in "Troubleshooting". The Proof of Play log memory size is 1 more hour. Please get a log by using PD external command. See page 90. The battery is
  • NEC UN552VS | User Manual English - Page 91
    BEACON To turn on or off for the detection from AMX Device Discovery when connecting to a network supported by an AMX's NetLinx control system. HINT: When using a device that supports AMX Device Discovery, all AMX NetLinx control systems will recognize the device and download the appropriate Device
  • NEC UN552VS | User Manual English - Page 92
    the left column below HOME. CRESTRON ROOMVIEW compatibility The monitor supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to Up to 60 alphanumeric characters can be used. Network Service Settings Click on "NETWORK SERVICE" on the left column below HOME. PJLink CLASS
  • NEC UN552VS | User Manual English - Page 93
    menu. For example, if you want to provide contact information for customer service at your company, that information can be entered here. Note that the application is only available for Android devices. Please refer to the NEC website for more information.  NOTE: • Sensor position: See page
  • NEC UN552VS | User Manual English - Page 94
    current status of the monitor by self-diagnosis. For the Proof of Play function including self-diagnosis, please see the "External_Control.pdf". See page 104. Check item  INPUT Message DVI, DisplayPort1, DisplayPort2, HDMI1, HDMI2, OPTION*, MP, VGA (RGB/YPbPr), VIDEO  Resolution e.g. (H)1920
  • NEC UN552VS | User Manual English - Page 95
    English Chapter 8 Troubleshooting This Chapter Includes: >> "Screen Image and Video Signal Issues" on page 92 >> "Hardware Issues" on page 93 >> "Image Persistence" on page 95 English−91
  • NEC UN552VS | User Manual English - Page 96
    supported resolution has been selected on the display card or system being used. If in doubt, please refer to the user's manual • Please be aware that LCD Technology may experience a phenomenon known As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images,
  • NEC UN552VS | User Manual English - Page 97
    Image Adjust controls to increase or decrease the coarse adjustment. • Make sure that a supported resolution has been selected on the display card or system being used. • If in doubt, please refer to the user's manual of the display card or system to change the resolution. Selected resolution is
  • NEC UN552VS | User Manual English - Page 98
    that the USB cable is properly connected. Refer to your USB device user's manual. • Check that the USB upstream port on the monitor is connected to to [OFF]. The monitor may go into standby mode when a connected CEC supported device goes into standby. • Please check [POWER] in the [SCHEDULE SETTINGS
  • NEC UN552VS | User Manual English - Page 99
    one hour to erase the image. As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at fixed image is displayed for long period, ionic impurities inside the LCD are accumulated along the displayed image and may be permanent. (
  • NEC UN552VS | User Manual English - Page 100
    "UN462A" on page 97 >> "UN462VA" on page 98 >> "UN492S" on page 99 >> "UN492VS" on page 100 >> "UN552A" on page 101 >> "UN552S" on page 102 >> "UN552VS" on page 103 [Notice] About the MPEG-4 AVC, MPEG-4 Visual license included in this product 1. MPEG AVC THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
  • NEC UN552VS | User Manual English - Page 101
    English UN462A LCD Module Product Specifications Frequency Pixel Clock Viewable Size Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB
  • NEC UN552VS | User Manual English - Page 102
    UN462VA LCD Module Product Specifications Frequency Pixel Clock Viewable Size Input Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB:
  • NEC UN552VS | User Manual English - Page 103
    English UN492S LCD Module Product Specifications Frequency Pixel Clock Viewable Size Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB
  • NEC UN552VS | User Manual English - Page 104
    UN492VS LCD Module Product Specifications Frequency Pixel Clock Viewable Size Input Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB:
  • NEC UN552VS | User Manual English - Page 105
    English UN552A LCD Module Product Specifications Frequency Pixel Clock Viewable Size Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB
  • NEC UN552VS | User Manual English - Page 106
    UN552S LCD Module Product Specifications Frequency Pixel Clock Viewable Size Input Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB:
  • NEC UN552VS | User Manual English - Page 107
    English UN552VS LCD Module Product Specifications Frequency Pixel Clock Viewable Size Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB
  • NEC UN552VS | User Manual English - Page 108
    nec-display-solutions.com Japan: https://www.nec-display.com/jp/ Additional Documentation "NEC LCD Monitor - External Control" PDF ASCII Control Command - Reference Manual" PDF document This document defines NEC Display Solutions website in your region. "Raspberry Pi Compute Module - Setup Guide" PDF
  • NEC UN552VS | User Manual English - Page 109
    for Microsoft Windows and macOS, is available for purchase and may require the use of a supported external color sensor. Please contact an authorized NEC dealer or see the NEC Display Solutions website in your region for purchase information and availability. NaViSet Administrator software This free
  • NEC UN552VS | User Manual English - Page 110
    Appendix B OSD Controls List This Chapter Includes >> "INPUT" on page 107 >> "PICTURE" on page 107 >> "AUDIO" on page 112 >> "SCHEDULE" on page 112 >> "MULTI-INPUT" on page 114 >> "OSD" on page 117 >> "MULTI-DISPLAY" on page 118 >> "DISPLAY PROTECTION" on page 122 >> "CONTROL" on page 123 >> "OPTION
  • NEC UN552VS | User Manual English - Page 111
    example, this allows print previews or cinematic or color grading effects to be performed within the monitor itself. This feature is used with supporting software. 3D LUTs are uploaded to the monitor via application software. ON: Enables/Activates the 3D LUT function for the selected picture mode
  • NEC UN552VS | User Manual English - Page 112
    dark parts of the image (S-Curve). DICOM SIM. DICOM GSDF curve simulated for LCD type. HDR-ST2084 (PQ) Gamma setting for HDR, typically for UHD disk , 2, 3 A programmable gamma curve can be loaded using optional NEC software. AUTO HDR SELECT HDMI input only GAMMA correction of HDR signal
  • NEC UN552VS | User Manual English - Page 113
    inputs only Controls the vertical position of the image within the display area of the LCD. Press + button to move up. Press - button to move down. CLOCK VGA 60 INPUT RESOLUTION VGA (RGB) input only If there is a problem with signal detection, this function forces the monitor to display the
  • NEC UN552VS | User Manual English - Page 114
    PICTURE MENU ASPECT Select the aspect ratio of the screen image.  NOTE: • • When selecting an image flip option with the [ASPECT] set to [DYNAMIC], the aspect will automatically change to [FULL]. Aspect will return to [DYNAMIC] after [NONE] is set to the [IMAGE FLIP]. When starting tile
  • NEC UN552VS | User Manual English - Page 115
    English PICTURE MENU DEINTERLACE ON OFF NOISE REDUCTION VIDEO input only TELECINE HDMI1, HDMI2, VIDEO, VGA (YPbPr), MP inputs only ADAPTIVE CONTRAST*2 HDMI1, HDMI2, VIDEO, VGA (YPbPr), MP inputs only UNIFORMITY*2 ROTATION IMAGE FLIP NONE Selects the IP (Interlace to Progressive) conversion
  • NEC UN552VS | User Manual English - Page 116
    AUDIO AUDIO MENU VOLUME Increase or decrease output volume level. BALANCE Select [STEREO] or [MONO] for the audio output. BALANCE STEREO: Independent audio channels for routing audio signal. Sound balance between the left and right speakers can be adjusted. - Press the + button to move the
  • NEC UN552VS | User Manual English - Page 117
    English SCHEDULE MENU TIME Set the start time for the schedule. NOTE: Fill in both fields for the TIME setting. If either field displays [--], the schedule does not run. INPUT Select which video input to use for the schedule. To keep the active input when the schedule starts, make sure the
  • NEC UN552VS | User Manual English - Page 118
    SCHEDULE MENU DATE & TIME YEAR MONTH DAY TIME CURRENT DATE TIME DAYLIGHT SAVING DAYLIGHT SAVING BEGIN MONTH END MONTH TIME DIFFERENCE OFF TIMER RESET Set the date and time for the real-time clock. Date & time must be set in order for the [SCHEDULE] function to operate. After setting the date and
  • NEC UN552VS | User Manual English - Page 119
    English MULTI-INPUT MENU ACTIVE PICTURE*1, *2 Selects which input is currently being configured for the MULTI-PICTURE MODE settings. When the OSD menu is closed, this is the input that is controlled by the remote control.  NOTE: • When [MULTI PICTURE MODE] is on, the active picture can be
  • NEC UN552VS | User Manual English - Page 120
    does not search for video signal on the other input connections. If video signal is lost on the current input, or if the monitor is manually switched to an input that does not have video signal, the screen will go black and the LED will flash green. If [POWER SAVE] is
  • NEC UN552VS | User Manual English - Page 121
    English MULTI-INPUT MENU DisplayPort BIT RATE HDMI VIDEO LEVEL SIGNAL FORMAT HDMI1, HDMI2, DisplayPort1, DisplayPort2, COMPUTE MODULE, OPTION only RESET Selects the DisplayPort mode [1.1a] or [1.2]. DisplayPort 1.1a is selected, [SST] is set automatically. DisplayPort 1.2 is selected, set [SST] or
  • NEC UN552VS | User Manual English - Page 122
    ROTATION] is [PORTRAIT]. Shows the monitor's button controls Key Guide when displaying the OSD Menu. The Key Guide is aligned to the monitor's button control panel and does not move if the OSD POSITION changes. It is a visual guide to indicate the position of the buttons so that features can be
  • NEC UN552VS | User Manual English - Page 123
    of the LAN cables being used. Please see the "Setting copy.pdf" file on the NEC website. Highlight and press SET to select each setting that needs to 100) through a distribution amplifier. This option is for manually configuring the TILE MATRIX settings that are automatically configured when using
  • NEC UN552VS | User Manual English - Page 124
    Scan Reverse With V Scan Reverse Frame gap Panel scan NONE AUTO MANUAL NON REVERSE REVERSE TILE MATRIX MEM COMMON INPUT ID CONTROL MONITOR ID any of the 10 available Group IDs, labeled A-J. Refer to the External_Control.pdf file (see page 104) for the monitor's command codes. Automatically sets
  • NEC UN552VS | User Manual English - Page 125
    English MULTI-DSP MENU BASE NUMBER Sets the starting number for the monitor ID and/or IP address. This is the number that is assigned to the master monitor. The automatic numbering assigns consecutive numbers, starting from this number and counting up by 1, to each monitor in the LAN chain. When
  • NEC UN552VS | User Manual English - Page 126
    on page 100, "UN552A" on page 101, "UN552S" on page 102 and "UN552VS" on page 103) for power consumption information.  NOTE When the monitor is connected is selected the fans are always on. The fans cannot be turned off manually. The [FAN SPEED] can be adjusted between LOW and HIGH. Use the
  • NEC UN552VS | User Manual English - Page 127
    Set the IP addresses of DNS servers. [AUTO]: The DNS server, which is connected with the monitor, will automatically assign its IP address. [MANUAL]: Manually enter the IP address of the DNS server which is connected with the monitor. NOTE: Consult your network administrator for the IP address when
  • NEC UN552VS | User Manual English - Page 128
    CONTROL MENU SECURITY PASSWORD SECURE MODE OFF START-UP LOCK CONTROL LOCK BOTH LOCK IR LOCK SETTINGS MODE SELECT UNLOCK ALL LOCK CUSTOM LOCK Requires a password to be entered to use the monitor. NOTE: This function is for restricting displaying on this monitor. This is not for restricting or
  • NEC UN552VS | User Manual English - Page 129
    than [OFF]. BACKLIGHT DIMMING*2, *4 Automatically adjusts each of the clusters of the backlight of the LCD independently, according to the input signal. NOTE: If [AUTO BRIGHTNESS] is set to [MODE Option Board installed in the monitor. *4: For UN492S, UN492VS, UN552S, UN552VS only. English−125
  • NEC UN552VS | User Manual English - Page 130
    CONTROL MENU ROOM LIGHT SENSING*1, *2 The backlight of the LCD panel can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor
  • NEC UN552VS | User Manual English - Page 131
    , the CEC functions may not work as described. Not all manufacturers provide the same level of CEC integration and control, or they may only provide support for their products. The CEC device goes into standby at the same time as the monitor when the STANDBY button is pressed on the remote
  • NEC UN552VS | User Manual English - Page 132
    use this function only when the operating system cannot be shut down manually. SLOT2 CH SETTING Selects signal type according to the slot 2 signal is displayed on the right half. If the internal PC does not support either one of the signal types, the existing signal will automatically be displayed
  • NEC UN552VS | User Manual English - Page 133
    power is turned on. DISABLE - power to the Compute Module is manually controlled via the [POWER SUPPLY] setting, the HTTP interface to the display a LAN command to the display. Requires a password to set options in the [SERVICE MENU]. The password is [ON] by default and needs to be input to disable
  • NEC UN552VS | User Manual English - Page 134
    product" on page 131 >> "Energy Saving" on page 131 >> "WEEE Mark (European Directive 2012/19/EU and amendments)" on page 131 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company's top priorities in trying to minimize the burden placed
  • NEC UN552VS | User Manual English - Page 135
    recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive way
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
User’s Manual
Large Format Display
MultiSync UN462A
MultiSync UN462VA
MultiSync UN492S
MultiSync UN492VS
MultiSync UN552A
MultiSync UN552S
MultiSync UN552VS
MODEL: UN462A, UN462VA, UN492S, UN492VS, UN552A, UN552S, UN552VS
The model name and serial number can be found in the rating label on the rear side of monitor.