NEC X552S Installation Guide

NEC X552S Manual

NEC X552S manual content summary:

  • NEC X552S | Installation Guide - Page 1
    X552S Installation Guide 55" LCD Display Contents: Product Description and Notes Tilt Angle and Rotation Ventilation Requirements Display Dimensions Display Dimensions Optional Table Top Stand Dimensions Dimensions of Optional Wall Mount (WMK-4655S) Input Terminals Control Codes NEC Display
  • NEC X552S | Installation Guide - Page 2
    X552S Installation Guide 55" LCD Display NEC Display Solutions of America, Inc. Rev 1.0 Ventilation Recommendations: Dimensions below are minimum recommended for proper incorporated into the design. Contact NEC for design review and recommendations. www.necdisplay.com X552S Page 2 of 8
  • NEC X552S | Installation Guide - Page 3
    X552S Installation Guide 55" LCD Display Display dimensions: NEC Display Solutions of America, Inc. Rev 1.0 www.necdisplay.com X552S Page 3 of 8
  • NEC X552S | Installation Guide - Page 4
    X552S Installation Guide 55" LCD Display Display dimensions (cont.): NEC Display Solutions of America, Inc. Rev 1.0 www.necdisplay.com X552S Page 4 of 8
  • NEC X552S | Installation Guide - Page 5
    X552S Installation Guide 55" LCD Display NEC Display Solutions of America, Inc. Rev 1.0 Optional Table Top Stand Dimensions (ST-5220): www.necdisplay.com X552S Page 5 of 8
  • NEC X552S | Installation Guide - Page 6
    X552S Installation Guide 55" LCD Display NEC Display Solutions of America, Inc. Rev 1.0 Dimensions with Optional Wall Mount Kit (WMK-4655S): NOTE: Mount shown without offset spacers www.necdisplay.com X552S Page 6 of 8
  • NEC X552S | Installation Guide - Page 7
    X552S Installation Guide 55" LCD Display Input Panels: Bottom: Side: NEC Display Solutions of America, Inc. Rev 1.0 Handle Positioning: Note: Handle can be adjusted per screws that are included with the monitor. Instructions are included in the manual. www.necdisplay.com X552S Page 7 of 8
  • NEC X552S | Installation Guide - Page 8
    X552S Installation Guide 55" LCD Display Control Codes: NEC Display Solutions of America, Inc. Rev 1.0 NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection: Communication Protocol: Interface: RS-232C Communication: Asynchronous Baud
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

NEC Display Solutions of America, Inc.
X552S Installation Guide
55” LCD Display
Rev 1.0
www.necdisplay.com
X552S
Page 1 of 8
Contents:
Product Description and Notes
Page 1
Tilt Angle and Rotation
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Page 3
Display Dimensions
Page 4
Optional Table Top Stand Dimensions
Page 5
Dimensions of Optional Wall Mount (WMK-4655S)
Page 6
Input Terminals
Page 7
Control Codes
Page 8
Product Description
Type:
LCD Display
Screen Surface:
Anti-Reflective
Resolution:
1920 x 1080
Dimensions without stand: 49.4”(W) x 28.6”(H) x 1.8”(D)
Aspect Ratio:
16:9
Dimensions with stand:
49.4”(W) x 30.1”(H) x 15.7” (D)
FCC:
Class B
Weight without stand:
54.0 lbs / 24.5 kg
Power Consumption:
160W (typ)
Weight with stand:
58.9 lbs / 26.7 kg
BTU’s:
545.94 BTU/hour
Built-In Speaker
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Tilt Angle and Rotation
Monitor may be angled and rotated from normal landscape and portrait orientation to both face up and face down positioning.
When
orientated in face up or face down position, operating temperature for the unit changes.
Rotate only clockwise for portrait orientation.
Operating Temperatures:
o
Landscape:
5-40° Celsius; 41-104° Fahrenheit
Face Up:
5-35° Celsius; 41-95° Fahrenheit
o
Portrait:
5-40° Celsius; 41-104° Fahrenheit
Face Down:
5-35° Celsius; 41-95° Fahrenheit