NEC X841UHD User's Manual

NEC X841UHD Manual

Get NEC X841UHD PDF manuals and user guides View all NEC X841UHD manuals
Add to My Manuals
Save this manual to your list of manuals

NEC X841UHD manual content summary:

  • NEC X841UHD | User's Manual - Page 1
    User's Manual MultiSync X841UHD
  • NEC X841UHD | User's Manual - Page 2
    (On-Screen-Display) Controls...English- LCD monitor via LAN Control English-37 Connecting to a Network ...English-37 Network Setting by Using an HTTP Browser English-37 POINT ZOOM...English-46 PROOF OF PLAY...English-46 INTELLIGENT WIRELESS DATA...English-47 Features ...English-48 Troubleshooting
  • NEC X841UHD | User's Manual - Page 3
    NEC Display Solutions of America, Inc. Address: 500 Park Boulevard, Suite 1100 Itasca, Illinois 60143 Tel. No.: (630) 467-3000 Type of Product: Display Monitor Equipment Classification: Class B Peripheral Model: MultiSync X841UHD (X841UHD instructions, TV Interference Problems." This booklet
  • NEC X841UHD | User's Manual - Page 4
    read carefully in order to avoid any problems. CAUTION: Please use the power cord 230 220 100 * When operating the MultiSync monitor with its AC 125-240V used. NOTE: This product can only be serviced in the country where it was purchased. Use display of television broadcast signals. English-2
  • NEC X841UHD | User's Manual - Page 5
    National Electrical Code (NEC), in particular Section 820 and refer servicing to qualified service personnel by following operating instructions. Recommended Use • reflections. • Clean the LCD monitor surface with a lint . • Avoid displaying fixed patterns the maximum ergonomic benefits, we recommend the
  • NEC X841UHD | User's Manual - Page 6
    Contents Your new MultiSync monitor box* should contain the following: • LCD monitor • Power cord*1 • Video Signal Cable (DisplayPort cable) • Video Signal Cable (Mini DisplayPort to DisplayPort cable) • Wireless Remote Control and AAA Batteries • Setup Manual • Clamp x 1 • Screw with washer (M4 x
  • NEC X841UHD | User's Manual - Page 7
    strong enough to support the weight of the unit so that the unit will be safe from harm. • Refer to the instructions included with the mounting equipment for detailed information. • Make sure there is no gap between the monitor and the bracket. Orientation • When using the display in the portrait
  • NEC X841UHD | User's Manual - Page 8
    a problem is detected, please refer to qualified personnel for service. • Regularly check the mounting location for signs of damage or weakness that may occur over time. 2. Attach Mounting Accessories Be careful to avoid tipping monitor when attaching accessories. VESA Mounting Interface (M8) 400 mm
  • NEC X841UHD | User's Manual - Page 9
    be done by four or more people. To install, follow those instructions included with the stand or mounting apparatus. Use only those devices Tipping When using the display with the optional table top stand fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in
  • NEC X841UHD | User's Manual - Page 10
    within the monitor, the indicator will blink red. * If "OFF" is selected in "POWER INDICATOR" (see page 27), LED will not light when the LCD monitor is in active mode. µ Room light sensing sensor Detects the level of ambient light, allowing the monitor to make automatic adjustments to the backlight
  • NEC X841UHD | User's Manual - Page 11
    power ON/OFF. · AC IN connector Connects with the supplied power cord. » Service port This USB slot is for future software upgrades. ¿ LAN port (RJ-45) or HDTV device having a digital RGB output. * This connector does not support analog input. ¾ HDMI IN To input digital HDMI signals. µ DisplayPort
  • NEC X841UHD | User's Manual - Page 12
    and change passwords, change channel and set REMOTE ID. ² ENT button*1 ¶ DISPLAY button Turns on/off the information OSD. See page 18. º MENU button /DOWN button (CH/ZOOM +/-)*1 Increases or decreases POINT ZOOM level. ƻ GUIDE button*1 Ƽ MUTE button Turns on/off mute function. ƽ PICTURE MODE
  • NEC X841UHD | User's Manual - Page 13
    When MULTI PICTURE is OFF, the displayed single picture rotates 90°. NOTE: function. See page 33. MTS button*1 button*1 Activates closed captioning Refer to the option board's manual for further information. *2: This of the remote control toward the LCD monitor's remote sensor during button operation
  • NEC X841UHD | User's Manual - Page 14
    LCD monitor so as not to scratch the panel. 2. Install the remote control batteries The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: NEC making connections. • Refer to your equipment user manual for further information. NOTE: Do not connect/disconnect
  • NEC X841UHD | User's Manual - Page 15
    all the attached external equipment When connected with a computer, switch on the power of the computer first. 6. Operate the attached external equipment Display the signal from the desired input source. 7. Adjust the sound Make volume adjustments when required. 8. Adjust the screen (See pages 24 and
  • NEC X841UHD | User's Manual - Page 16
    the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram USB Upstream *2: INPUT CONFIGURATION (See page 18). *3: DVI signal is not displayed by factory setting. To display DVI signal, set to "HDMI/DVI" or "DVI" at HDMI/
  • NEC X841UHD | User's Manual - Page 17
    LCD monitor will enable you to display your computer's screen image. Some video cards may not display an image correctly. Your LCD monitor displays , USB function may not working. In this case, please check User's manual of your computer or device, or contact your supplier for detail information.
  • NEC X841UHD | User's Manual - Page 18
    Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NOTE: The Main Power Switch must be
  • NEC X841UHD | User's Manual - Page 19
    Amber blink alternately SETTINGS" enabled Diagnosis (Detecting failure) Red Blinking (See Troubleshooting page 49) *1 If "OFF" is selected in POWER INDICATOR (page 27 Squeeze FULL Using Power Management The LCD monitor follows the VESA approved DPM Display Power Management function. The power
  • NEC X841UHD | User's Manual - Page 20
    (PRESET1) INPUT CONFIGURATION (See page 29). Information OSD The Information OSD provides information such as: Input Source, Picture Size, etc. Press the DISPLAY button on the remote to bring up the Information OSD. ³ Input Name · Audio input mode » Picture aspect ¿ Input Signal Information ´ Multi
  • NEC X841UHD | User's Manual - Page 21
    color managed applications. Setting that conforms to the DICOM standard for the Grayscale Standard Display Function. For "MultiProfiler" software or the Hardware Calibration settings by NEC Display Solutions software (some OSD settings are disabled). MODE LUMINANCE WHITE PURPOSE Adjusts the overall
  • NEC X841UHD | User's Manual - Page 22
    that may occur throughout the display area of the screen. These variations are characteristic of LCD panel technology. This function improves inaccurate color reproduction. - MultiProfiler software, developed by NEC Display Solutions, is highly recommended to provide extended color management
  • NEC X841UHD | User's Manual - Page 23
    English SPECTRAVIEW ENGINE is "OFF": Selects five picture modes by Picture mode in OSD menu or using Picture mode button on the wireless remote control. DVI1, DVI2, DPORT, OPTION*, PRESET1*1, PRESET2*1 STANDARD sRGB CUSTOM1 CUSTOM2 HIGHBRIGHT HDMI1, HDMI2, HDMI3, HDMI4, PRESET1*1, PRESET2*1
  • NEC X841UHD | User's Manual - Page 24
    OSD (On-Screen-Display) Controls NOTE: Some functions may not be available depending 50 50 THANK YOU FOR SAVING THE ENVIRONMENT. CARBON FOOTPRINT 86.0 % Goto Adjustment Return Close Key Guide Adjustment Settings Press UP or DOWN button to select sub-menu. Press SET/POINT ZOOM. Press UP or
  • NEC X841UHD | User's Manual - Page 25
    be changed. Gamma correction is handled by the LCD panel. NATIVE*2 (except sRGB setting) 2.2 Typical display gamma for use with a computer. 2.4 Good DICOM GSDF curve simulated for LCD type. PROGRAMMABLE1, 2, 3 A programmable gamma curve can be loaded using NEC optional software. UHD UPSCALING
  • NEC X841UHD | User's Manual - Page 26
    released: MULTI PICTURE MODE, TEXT TICKER, STILL, POINT ZOOM and ROTATE. When input signal is Interlace, the image may be disturbed. IMAGE FLIP Display the inverse image right-left, up-down or rotation. Press + or - to select. NONE NONE - Normal mode. H FLIP - The image inverts right-left
  • NEC X841UHD | User's Manual - Page 27
    is not available. If ROTATE of MULTI PICTURE CONTROL is selected in the input signal with a high refresh rate, the image may not be displayed smoothly. To reduce this condition, please set the input signal with a low refresh rate. *1: This function is released when selecting SUPER in INPUT CHANGE
  • NEC X841UHD | User's Manual - Page 28
    to factory settings except for INPUT SELECT and PICTURE ASPECT. OFF - Select the language used by the OSD. ENGLISH (Depends on destination) MENU DISPLAY TIME Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds. OSD POSITION Determines the location where the
  • NEC X841UHD | User's Manual - Page 29
    at the back of the monitor. To return to normal operation, press the "DISPLAY" button on the remote control for 5 seconds. MODE SELECT Selects the mode the monitor. If "OFF" is selected, LED will not light when the LCD monitor is in active mode. SETTING COPY In a daisy chain scenario, select
  • NEC X841UHD | User's Manual - Page 30
    will be changed FULL image. After released SCREEN SAVER, the image will be displayed with current ASPECT setting. 3840 x 2160 (60 Hz) input cannot be Automatically assign an IP address of DNS server connected to the monitor. MANUAL: Set your IP address of DNS server connected to the monitor. AUTO
  • NEC X841UHD | User's Manual - Page 31
    will not look for other video signals while the current video source is present. LAST DETECT Corresponding option only*1 When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, the monitor will automatically switch to the new video
  • NEC X841UHD | User's Manual - Page 32
    be shown on the screen. OFF Image size stays within the display area. The whole image is displayed on the screen. NOTE: When you use a computer with use this function only when the operating system cannot be shut down manually. 120Hz (not adjustable) TOUCH PANEL (not adjustable) RESET Resets
  • NEC X841UHD | User's Manual - Page 33
    SENSING is MODE1 or MODE2. ROOM LIGHT SENSING* The backlight of the LCD screen can be set to increase or decrease depending on the amount of near the monitor again, the monitor automatically return to normal mode and display the input signal selected in INPUT SELECT. INTELLI. WIRELESS DATA Select
  • NEC X841UHD | User's Manual - Page 34
    THU SUN Close NOTE 2: IMAGE PERSISTENCE Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence to erase the image. As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver
  • NEC X841UHD | User's Manual - Page 35
    in conjunction with the Monitor ID, allowing control of up to 100 individual MultiSync monitors. For example: if there are many monitors being used in the same the REMOTE ID SET button. The MONITOR ID number is shown on the display when your remote control is in ID mode. Figure 2 Remote set up to
  • NEC X841UHD | User's Manual - Page 36
    . NOTE: Multiple monitors that are daisy-chained have a limit to the connectable monitors. When manually specify the ID number or control by the specified ID number, please execute AUTO ID Connector IN OUT LAN1 LAN2 Connection MultiSync MultiSync LAN1 LAN2 LAN1 LAN2 LAN Cable LAN Cable
  • NEC X841UHD | User's Manual - Page 37
    between input signals. • Sound Mute ON or OFF. Connection LCD Monitor + computer MultiSync computer RS-232C RS-232C Cable NOTE: If your computer is command. Instructions for the control command can be found on the CD included with the display. The file is called "External_control.pdf". 1)
  • NEC X841UHD | User's Manual - Page 38
    3) Control command diagram For other commands, please see "External_Control.pdf" file on the CD-ROM. Function (Monitor ID = 1) Power ON Power OFF Input Source Select DisplayPort Input Source Select DVI1 Input Source Select DVI2 Input
  • NEC X841UHD | User's Manual - Page 39
    +F5 keys to refresh your web browser (or clear the cache). The display or button's response can be slowed down or operation may not be accepted of your network. Should this happen, consult your network administrator. The LCD monitor may not respond if its buttons are repeatedly pressed in rapid
  • NEC X841UHD | User's Manual - Page 40
    by the network administrator, you can then access the network settings of the display via that registered host name using a compatible browser. If the host the monitor has been set to "pd.nec.co.jp", access is gained to the network setting by specifying http://pd.nec.co.jp/index.html for the address
  • NEC X841UHD | User's Manual - Page 41
    Set for IP ADDRESS SETTINGS. AUTO: Automatically assign an IP address. MANUAL: Set your IP address of the network connected to the monitor. NOTE Automatically assign an IP address of DNS server connected to the monitor. MANUAL: Set your IP address of DNS server connected to the monitor. PRIMARY
  • NEC X841UHD | User's Manual - Page 42
    may not receive an Alert mail. Should this happen, check if the Recipient's Address is correct. TIP: For Control command diagram, please see file "External_Control.pdf" on the CD-ROM. English-40
  • NEC X841UHD | User's Manual - Page 43
    1 more hour. System error. Please contact your supplier. Reconfirm the setting condition from OSD (DISPLAY PROTECTION-FAN CONTROL) or please contact your supplier. Please check "No picture" in "Troubleshooting". Please get a log by using PD external command. See page 46. Please contact your supplier
  • NEC X841UHD | User's Manual - Page 44
    SNMP Setting Click "SNMP" on the left side of HOME. This function allows for getting status and controlling of a monitor via the network. Version: SNMP v1 Authenticated plaintext by community name, not return a confirmation message of Trap. SNMP v2c Authenticated plaintext by community name, return
  • NEC X841UHD | User's Manual - Page 45
    detect the device from AMX Device Discovery. CRESTRON Setting Click "CRESTRON" on the left side of HOME. CRESTRON ROOMVIEW compatibility The monitor supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be managed and controlled from a computer or a controller. For more
  • NEC X841UHD | User's Manual - Page 46
    of different manufacturers. This standard protocol is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005. The device supports all the commands of PJLink Class 1. Setting of PJLink will not be affected even when [RESET] is done from the menu. English
  • NEC X841UHD | User's Manual - Page 47
    English PD List Information Click "PD LIST" on the left side of HOME. Show the list of ID and IP address of multiple monitors that are daisy-chained. Only the master monitor can show the list. Memo Setting Click "MEMO" on the left side of HOME. Set a title and message. TITLE MESSAGE MEMO
  • NEC X841UHD | User's Manual - Page 48
    to disappear the icon. 5 Press [EXIT] to return to a normal size. 6 Press [MENU] to display OSD menu. NOTE: • The image may be distorted during this function. • This function does 0m/0s NOTE: For Proof of Play function, please see "External_Control.pdf" on the CD-ROM. English-46
  • NEC X841UHD | User's Manual - Page 49
    set by this function. NOTE: Sensor position: See page 9. Please contact your supplier for detailed information. Function name Setting Copy Setting read and write function Display information Security Setting English-47
  • NEC X841UHD | User's Manual - Page 50
    . NEC recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America. DVI-D: The digital-only subset of DVI ratified by the Digital Display Working Group (DDWG) for digital connections between computers and displays. As a digital-only connector, analog support is
  • NEC X841UHD | User's Manual - Page 51
    please contact your nearest authorized NEC DISPLAY SOLUTIONS service facility. • If the LCD monitors' image persistence is not permanent, but constant images being displayed supported mode has been selected on the display card or system being used. (Please consult display card or system manual
  • NEC X841UHD | User's Manual - Page 52
    "OFF TIMER" function is enabled and the power to the LCD monitor is turned off when the power supply is interrupted unexpectedly, properly connected. Refer to your USB device User's Manual. • Check if the USB upstream port on the display pattern. This is no product fault or degradation. English-50
  • NEC X841UHD | User's Manual - Page 53
    x 44.0 (H) x 3.3 (D) inches Weight 70.5 kg (155.4 lbs) VESA compatible mounting interface 400 mm x 400 mm (M8, 4 Holes) Power Management VESA DPM Plug & Play VESA DDC2Bi, DDC/CI, DisplayPort Power supply for Slot 2 type OPTION 16V/3.6 A Accessories Setup manual, Power Cord, Video Signal
  • NEC X841UHD | User's Manual - Page 54
    normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your NEC display products, please follow the guidance of your local authority, or ask the shop where you purchased the product, or if applicable, follow any
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
User’s Manual
MultiSync X841UHD