Netgear DG834v4 DG834(G) VPN Configuration with ProSafe Client
Netgear DG834v4 - ADSL Modem Router Manual
View all Netgear DG834v4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear DG834v4 manual content summary:
- Netgear DG834v4 | DG834(G) VPN Configuration with ProSafe Client - Page 1
DG834v3 - Scenario: This document will guide you on how to create a VPN policy for your DG834v3, as well as how to configure the VPN Pro-Safe VPN client in order to allow a Virtual Private Network to be established over the internet. - Netgear DG834v4 | DG834(G) VPN Configuration with ProSafe Client - Page 2
Start by creating the IKE policy in the management GUI with these parameters: (NOTE: The Local LAN and Remote LAN addresses must be in different networks with different IP addresses as in the example above, however they can be any two different private networks. Be sure to fill accordingly with the - Netgear DG834v4 | DG834(G) VPN Configuration with ProSafe Client - Page 3
"vpn". Click on the name of the new created connection and fill the parameters accordingly, for this example we'll use these: (NOTE: The Gateway IP address must be the external IP address of your - Netgear DG834v4 | DG834(G) VPN Configuration with ProSafe Client - Page 4
Click on "My Identity" and fill the fields accordingly, be sure to click on the Pre-Shared Key button and input your own pre shared key. Here are the settings used in our example: Click on "Security Policy" and verify the following settings: - Netgear DG834v4 | DG834(G) VPN Configuration with ProSafe Client - Page 5
Next, expand "Security Policy" and "Authentication (Phase 1)" - Click on "Proposal 1" and verify the settings contained to match the ones of your policy. Functional settings in our example: Open the "Key Exchange (Phase 2)" category - Click on "Proposal 1" and verify the settings contained to match - Netgear DG834v4 | DG834(G) VPN Configuration with ProSafe Client - Page 6
For last, right-click on the tray icon of the Netgear VPN client with your mouse, select connect and click the connection you just created. If your settings are correct you'll log from our example VPN scenario: Here is a view of the connection log from our example VPN scenario on the Router itself: - Netgear DG834v4 | DG834(G) VPN Configuration with ProSafe Client - Page 7
DG834v3
– Scenario:
This document will guide you on how to create a VPN policy for your DG834v3, as well as how to
configure the VPN Pro-Safe VPN client in order to allow a Virtual Private Network to be established over
the internet.