Netgear GS110TUP Installation Guide

Installation Guide

10-Port Gigabit Ethernet Ultra60 PoE++

Smart Managed Pro Desktop Switch

with 1 SFP and 1 Copper Uplink

GS110TUP

Package contents

•

NETGEAR GS110TUP Switch

•

DC power adapter (varies by region)

•

Rubber footpads for tabletop installation

•

Wall-mount kit

(The wall-mount screws are 6.5 mm in diameter and 16 mm in length.)

•

Rack-mount kit

•

Installation guide

Note:

For information about installation, see the hardware installation guide,

which you can download from

www.netgear.com/support/

.

Connect the switch

1.

Connect devices to the RJ-45 PoE++ ports (1–4) and PoE+ ports (5–8) on the

switch front panel.

Use Category 5e (Cat 5e) Ethernet cables terminated with RJ-45 connectors

to make Gigabit connections.

2.

Connect port 9 (the RJ-45 copper uplink port) or port 10 (the SFP uplink port)

on the switch to a network that includes a DHCP server.

Note:

In a small office or home office network, connect the switch to the LAN

port of a router that is connected to a modem.

To use the SFP port, you must insert an SFP transceiver module, which you can

purchase from NETGEAR.

3.

Power on the switch and wait two minutes.

If you connected the switch to a network with a DHCP server such as a router,

the switch is automatically assigned a new IP address. (The default switch IP

address is 192.168.0.239.)

Check the PoE status

The switch can supply up to 60W PoE++ (IEEE 802.3bt) to each PoE++ port (1–4),

and up to 30W PoE+ (IEEE 802.3at) to each PoE+ port (5–8). The maximum PoE

power budget across all active PoE++ and PoE+ ports is 240W.

The PoE Max LED indicates the status of the PoE budget on the switch:

•

Off

. Sufficient. More than 7W of PoE power is available.

•

Solid amber

. Less than 7W of PoE power is available.

•

Blinking amber

. At least once during the previous two minutes, less than 7W

of PoE power was available.

Register with the NETGEAR Insight app

You can use the NETGEAR Insight app to register the switch.

Note:

If the switch is connected to a WiFi router or access point and to the

Internet and you connect your smartphone to the same WiFi network as the

switch, you can use the NETGEAR Insight app to both discover the IP address of

the switch in your network and register the switch with NETGEAR.

1.

On your mobile device, visit the app store, search for NETGEAR Insight, and

download the latest version of the app.

2.

Open the NETGEAR Insight app.

3.

If you did not set up a NETGEAR account, tap

Create NETGEAR Account

and

follow the onscreen instructions.

4.

Enter the email address and password for your account and tap

LOG IN

.

Note:

If your switch and smartphone are connected to the same network,

after you log in to your account, the IP address of the switch displays in the

devices list. Then, in the devices list, select the switch, tap the

ADD DEVICE

button, and continue with Step 7.

However, if the switch does not display in the devices list, tap

+

in the upper-

right corner, and either tap

Scan Network

or continue with Step 6.

5.

Tap

+

in the upper right corner.

6.

Either use the camera on your smartphone to scan the bar code or QR code,

or type in the serial number. Then, follow the onscreen instructions.

7.

Create or select a network location to add this device to.

8.

Follow the onscreen instructions to complete the registration of the switch.

Note:

To complete the registration process and unlock full access to the local

browser user interface (UI), your switch must be connected to a network with

Internet access. Or, you can enter the registration key on the login screen of the

local browser UI. For more information, see the following sections.

Router

Internet

GS110TUP

PoE++ LED

lighting

PoE+ WiFi access point

PoE++ speaker

PoE++

PoE+

Non-PoE

Sample connections

ReadyNAS

Computer

PoE++ PTZ camera

PoE++ encoder

PoE+ IP camera

Netgear GS110TUP Installation Guide

Netgear GS110TUP Manual

Netgear GS110TUP manual content summary: