Netgear GS305E Gigabit Ethernet Smart Managed Plus Switches User Manual
Netgear GS305E Manual
View all Netgear GS305E manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GS305E manual content summary:
- Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 1
User Manual Gigabit Ethernet Smart Managed Plus Switches Models GS105Ev2 GS105PE GS108Ev3 GS108PEv3 GS116Ev2 GS305E GS308E JGS516PE JGS524Ev2 JGS524PE February 2019 202-11700-05 NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134, USA - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 2
/ to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources. Compliance and Conformity For regulatory compliance information including the EU Declaration of Conformity, visit https - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 3
Managed Plus Switches User Manual. • Added Safety Instructions and Warnings on page 12. • Revised Configure the Switch on page 16. • Revised Access a Switch That Is Connected to a Network on page 17. • Revised Install the ProSAFE Plus Utility on page 19. • Added Use the NETGEAR Switch Discovery Tool - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 4
1 Hardware Supported Switch Models 8 Status LEDs 9 Models GS105Ev2, GS108Ev3, GS116Ev2, GS305E, and GS308E LEDs 9 Model GS105PE LEDs 9 Models GS108PEv3 LEDs 10 Model JGS524Ev2 LEDs 11 Models JGS516PE and JGS524PE LEDs 11 Safety Instructions and Warnings 12 Chapter 2 Get Started Configure the - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 5
the Switch 61 Save the Switch Configuration 61 Restore a Saved Switch Configuration 62 Restore Factory Default Settings 63 Manage Access Control 64 Add Devices to the Access Control Table 64 Remove Devices From the Access Control Table 65 Enable Port Mirroring 66 View Switch Information or - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 6
Specifications 77 Model GS108Ev3 Technical Specifications 78 Model GS108PEv3Technical Specifications 79 Model GS116Ev2 Technical Specifications 80 Model GS305E Technical Specifications 80 Model GS308E Technical Specifications 81 Models JGS516PE and JGS524PE Technical Specifications....82 Model - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 7
chapter covers the following topics: • Supported Switch Models • Status LEDs • Safety Instructions and Warnings Note: This user manual complements the installation guide that came with your switch. You can also download the installation guide by visiting netgear.com/support/download/. Note: For more - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 8
Ethernet Smart Managed Plus Switches User Manual describes the switch models that are listed in the following table. Table 1. Supported switch models Model GS105Ev2 GS105PE GS108Ev3 GS108PEv3 GS116Ev2 GS305E GS308E JGS516PE JGS524Ev2 JGS524PE Name 5-Port Gigabit Ethernet Smart Managed Plus Switch - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 9
switch model. For information about the front panel and ports for your switch model, see the installation guide for you model, which you can download by visiting netgear.com/support/download/. Models GS105Ev2, GS108Ev3, GS116Ev2, GS305E, and GS308E LEDs This section describes the LED designations - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 10
Models GS108PEv3 LEDs This section describes the LED designations of model GS108PEv3. Ports 1 through 4 are PoE ports. Ports 5 through 8 are regular Ethernet ports. Table 4. Model GS108PEv3 LEDs on the front panel LED Power LED , less than 7W of PoE power was available. Hardware 10 User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 11
located to the left of the ports, that is, not above or below the ports. On model JGS516PE, ports 1 through 8 are PoE ports. Ports 9 through 16 are regular Ethernet ports. On model JGS524PE, ports 1 though 12 are PoE ports. Ports 13 through 24 are regular Ethernet ports. Hardware 11 User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 12
A problem occurred port link is established. Port PoE status LEDs for PoE ports only Off. The port is not delivering PoE power. Solid green. The port is delivering PoE power. Solid yellow. A PoE fault occurred. Safety Instructions NETGEAR product, which might not be covered by NETGEAR's warranty, - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 13
system components, and never operate the product in a wet environment. If the system gets wet, see the appropriate section in your troubleshooting guide, or contact your trained service provider. • Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 14
your device uses a power adapter: - If you were not provided with a power adapter, contact your local NETGEAR reseller. - The power adapter must be rated for the product and for the voltage and current marked on . • Always follow your local and national wiring rules. Hardware 14 User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 15
in your network, change the switch password, change the language, and register your product. The chapter covers the following topics: • Configure the Switch • Access the Switch Using a Web Browser • Access the Switch With the ProSAFE Plus Utility • Use the NETGEAR Switch Discovery Tool to Access the - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 16
on page 21 • Use the NETGEAR Insight Mobile App to Discover the Switch on page 22 Access the Switch Using a Web Browser This manual describes the local browser-based management interface, referred to as the local browser interface. You can access and configure the switch directly through its local - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 17
to the switch. 5. Open a web browser, and enter the IP address of the switch. The login window opens. 6. Enter the switch password. The default password is password. The password is case-sensitive. 7. Click the Login button. You can now configure additional options for the switch through the local - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 18
Record your computer's TCP/IP configuration settings, and then configure the computer with a static IP address of 192.168.0.210 and 255.255.255.0 as the subnet mask. Note: If you are unsure how to do this, visit the support website at netgear.com/support and search for Static IP address on computer - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 19
Visit netgear.com/support/product/PCU Access and Configure the Switch IP addresses, power on the switch, and then use a computer that is connected to the same network as the switch. Note: You can also access and configure IP addresses. 2. Power on the switch. The DHCP server assigns the switch an IP - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 20
services once configuration is complete. 5. Select the Smart Managed Plus switch that you want to configure. If you do not see the switch, click the REFRESH button. 6. Click the APPLY button. The login window displays. 7. Enter the switch password. The default password is password. The password - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 21
Discovery Tool by visiting netgear.com/support/product/netgear-switch-discovery-tool.aspx configure the switch. 3. Unzip the Switch Discovery Tool files, double-click the .exe or .dmg file (for example, NETGEAR services on your computer. 5. Power on the switch. The DHCP server assigns the switch an IP - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 22
tap the CREATE NETGEAR ACCOUNT button to create a new account. After you log in to your account, the IP address of the switch displays in the device list. 5. Write down the IP address for future use. Change the Switch Password The default password to access the switch is password. We recommend that - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 23
IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password . However, for models GS108Ev3, GS108PEv3, GS305E, and GS308E you must download and install a firmware version - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 24
IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password interface of model GS108Ev3, GS108PEv3, GS305E, and GS308E: 1. Visit netgear.com/support/download/. 2. In the Enter a - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 25
address field of your web browser, enter the IP address of the switch. The login window opens. 8. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page process typically takes about three minutes. Get Started 25 User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 26
address of the switch. If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select Help - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 27
following topics: • VLAN Overview • Create Basic Port-Based VLANs • Assign Ports to Multiple Port-Based VLANs • Create 802.1Q-Based VLANs in a Basic Configuration • Create 802.1Q-Based VLANs in an Advanced Configuration • Add Tagged or Untagged Ports to an 802.1Q-Based VLAN • Specify a Port PVID for - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 28
In a basic port-based VLAN configuration, ports with the same VLAN ID are placed into the same VLAN. You can also assign ports to multiple VLANs (see Assign Ports to Multiple Port-Based VLANs on page 30). By default, all ports are members of VLAN 1. To create basic port-based VLANs: 1. Connect your - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 29
Gigabit Ethernet Smart Managed Plus Switches The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select VLAN. The Basic Port-based VLAN Status page displays. 6. If this is the first time that you are accessing this page or if you are changing - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 30
know the IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select VLAN. The Basic Port-based VLAN Status page - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 31
Smart Managed Plus Switches The VLAN Configuration and VLAN Membership sections display. The previous figure is an example. Your switch might provide more or fewer ports. 9. In the VLAN Identifier menu, select the VLAN. 10. Select the ports that you want to add to the VLAN by doing the following - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 32
Create 802.1Q-Based VLANs in a Basic Configuration A 802.1Q-based VLAN configuration lets you assign ports on the switch to a VLAN with an ID number in the range of 1-4093. By default, all ports are members of VLAN 1. In an advanced 802.1Q-based VLAN configuration, you can set up VLANs to which you - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 33
ports to a VLAN. In addition, you can use port VLAN IDs (PVIDs). By default, all ports are untagged members of VLAN 1. To create 802.1Q-based VLANs in an advanced configuration of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 34
Plus Switches The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select VLAN > 802.1Q > Advanced > VLAN Configuration. The Advanced 802.1Q VLAN Status page displays. 6. If this is the first - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 35
the IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select VLAN > 802.1Q > Advanced > VLAN Configuration - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 36
, select VLAN > 802.1Q > Advanced > VLAN Configuration. The Advanced 802.1Q VLAN Status page displays. In the VLAN Identifier Setting table, the ports display next to the VLAN or VLANs to which they were added. Specify a Port PVID for an 802.1Q-Based VLAN A default port VLAN ID (PVID) is a VLAN ID - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 37
. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select VLAN > 802.1Q > Advanced > VLAN Configuration. The Advanced 802.1Q VLAN Status page displays. The menu on the left displays more options. 6. Select Port PVID. You can select Port PVID - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 38
4 Optimize Performance With Quality of Service This chapter covers the following topics: • Enable 802.1p/DSCP-Based Quality of Service • Configure Port-Based Quality of Service • Set Up Rate Limiting • Set Up Broadcast Filtering 38 - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 39
tag. All ports on the IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select QoS. The Quality of Service - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 40
. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select QoS. The Quality of Service page displays. 6. If this is the first time that you are setting up port-based QoS, select the Port-based radio button and - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 41
can be set for a port in addition to other QoS settings. If the port rate limit is set, the switch restricts the acceptance or retransmission of data to the values configured. To set up rate limiting cable. 2. Launch a web browser. Optimize Performance With 41 Quality of Service User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 42
set a rate from 512 Kbit/s to 512 Mbit/s. By default, no limit is set. d. Click the Apply button. Your settings are saved. 7. To set different rates for one or more other ports, repeat Step 6. Set Up Broadcast Filtering You can configure the switch to block broadcast storms (massive transmission of - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 43
the IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is Your switch might provide more or fewer ports. Optimize Performance With 43 Quality of Service User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 44
menu, select the maximum rate. You can set a rate from 512 Kbit/s to 512 Mbit/s. By default, no limit is set. c. Click the Apply button. Your settings are saved. 9. To set a different rate for one or more other ports, repeat Step 8. Optimize Performance With 44 Quality of Service User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 45
5 Manage Network Settings This chapter covers the following topics: • Specify IP Address Settings for the Switch • Manage Multicast Traffic With IGMP Snooping • Set Up Link Aggregation Groups 45 - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 46
Use Browser-Based Access to Specify the Switch IP Address To specify IP address settings for the switch: 1. Connect your IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 47
additional options to manage and customize the switch for your network. Visit netgear.com/support/product/PCU to download the utility. To specify IP address settings for the switch: 1. Connect your computer to the same the switch, click the REFRESH button. Manage Network Settings 47 User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 48
the IP address, subnet mask, and if available, the gateway address. 7. Enter the switch password. The default password is password. The password is IP addresses, which range from 224.0.0.0 to 239.255.255.255. Based on the IGMP query and report messages, the switch forwards traffic only to the ports - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 49
address of the switch. If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 50
default, the VLAN ID is 1. You can specify a VLAN for IGMP snooping only if you enabled port-based or 802.1Q-based VLANs (see Use VLANS for Traffic Segmentation on page 27). IGMP snooping functions only on the VLAN that is specified in the VLAN ports IP address of the switch. If you do not know the IP - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 51
the ID of the VLAN. By default, if you enable IGMP snooping, snooping occurs on VLAN 1. However, you can enable snooping on any VLAN: • For port-based VLANs, you can enter a VLAN ID from 1 to the maximum number of ports that the switch supports. • For 802.1Q-based VLANs, you can enter a VLAN ID from - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 52
address of the switch. If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 53
Gigabit Ethernet Smart Managed Plus Switches 9. Select System > LAG > LAG Configuration. 10. Select the ID of the LAG for which you just set up the port membership. 11. In the Admin Mode menu, select Enable. 12. Click the Apply button. Your settings are saved. Manage Network Settings 53 User - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 54
Save the Switch Configuration • Restore a Saved Switch Configuration • Restore Factory Default Settings • Manage Access Control • Enable Port Mirroring • View Switch Information or Change the Switch Device Name • View or Clear the Port Statistics • PoE Considerations for Switches That Support PoE 54 - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 55
a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Management > Port Status. The previous figure is an example. Your switch might provide more or - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 56
a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Management > Port Status. The previous figure is an example. Your switch might provide more or - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 57
address of the switch. If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 58
sublayer with the 100BASE-TX and 1000BASE-T physical layers to support operation in Low Power Idle (LPI) mode. When LPI IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 59
default, the Disable radio button is selected. 7. Click the Apply button. Your settings are saved. Download and Update the Firmware You can manually check for the latest firmware version for your switch by visiting netgear.com/support cable. That is, configure a computer with an IP address in the - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 60
IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 9. Enter the switch password. The default password is password. The password the ProSAFE Plus Utility User Manual, which you can download by visiting netgear.com/support/download/. b. Complete the - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 61
password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Maintenance > Device Reboot. The Device Reboot page displays. 6. Select the check box. 7. Click the Apply button. The switch reboots. Save the Switch Configuration - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 62
the IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Maintenance > Save Configuration. The - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 63
IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Maintenance > Factory Default. The Factory - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 64
the IP address of the switch. If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. Manage and Monitor the Switch 64 User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 65
configure the following settings: • Source IP Address. Enter the IP that is associated with the IP address. 7. Click the IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 66
port. To enable port mirroring: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 67
the port numbers. You can select more than one source port. You cannot select a source port that is a member of a LAG. 8. In the Mirroring menu, select Enable. By default, mirroring is the address field of your web browser, enter the IP address of the switch. Manage and Monitor the Switch 67 User - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 68
IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password the Port Statistics For each switch port, you the port statistics: IP address of the switch. If you do not know the IP - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 69
password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System > Monitoring > Port highest-numbered port is disabled to make sure that the PDs that are connected to the higher-priority, lower numbered ports are supported first. Just - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 70
PoE and PoE+ 1 PoE and PoE+ 2 PoE and PoE+ 3 PoE and PoE+ 4 PoE+ only Class Description Default power (full) Very low power Low power Mid power High power Minimum Power Allocated to the Powered Device 0.44W 4.0W 7.0W 49W-12.95W 12.95W-25.5W Manage and Monitor the Switch 70 User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 71
7 Diagnostics and Troubleshooting This chapter covers the following topics: • Test Cable Connections • Resolve a Subnet Conflict to Access the Switch • PoE Troubleshooting Suggestions 71 - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 72
address of the switch. If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 16. The login window opens. 4. Enter the switch password. The default password is password. The password is case-sensitive. The Switch Information page displays. 5. Select System - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 73
network DHCP server discovers the switch and assigns it an IP address that is in the correct subnet for the network. PoE Troubleshooting Suggestions Here are some tips for correcting Power over Ethernet (PoE) problems that might occur on switches that support PoE: • Make sure that the PoE Max LED is - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 74
a PoE+ connection. The problem is most likely with the attached port exceeded the classification limit of the PD. The PoE voltage of the port is outside the range that the switch permits. Restart the switch to see if the condition resolves itself. Diagnostics and 74 Troubleshooting User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 75
A Factory Default Settings and Technical Specifications This appendix contains the following sections: • Factory Default Settings • Technical Specifications 75 - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 76
the following table. Table 9. Factory default settings Feature Switch password IP address Subnet mask DHCP mode IGMP snooping LAGs VLANs 802.1p/DSCP-based QoS Port-based QoS Rate limiting Broadcast filtering Loop detection Port speed Flow control Port mirroring Setting password 192.168.0.239 (if - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 77
Table 11. Model GS105PE technical specifications Feature Network interface Network cable Ethernet ports Description RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T Category 5e (Cat 5e) or higher-rated Ethernet cable 5 Factory Default Settings and 77 Technical Specifications User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 78
GS108Ev3 technical specifications Feature Network interface Network cable Ethernet ports Power input Power consumption Dimensions (W x D x (0.508 kg) 32º to 104ºF (0° to 40°C) 10-90% maximum relative humidity, noncondensing Factory Default Settings and 78 Technical Specifications User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 79
for all PoE ports (1-4) 15.4W maximum for each individual PoE port 60W maximum 6.2 in. x 4 in. x 1.14 in. (158 mm x 101 mm x 29 mm) 1.19 lb (0.538 kg) 32º to 104ºF (0° to 40°C) 10-90% maximum relative humidity, noncondensing Factory Default Settings and 79 Technical Specifications User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 80
for model GS305E. Table 15. Model GS305E technical specifications Feature Network interface Network cable Ethernet ports Power input 56 lb (0.255 kg) 32º to 122ºF (0° to 50°C) 10-90% maximum relative humidity, noncondensing Factory Default Settings and 80 Technical Specifications User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 81
Managed Plus Switches Table 15. Model GS305E technical specifications (Continued) Feature Electromagnetic compliance Network interface Network cable Ethernet ports Power input Power consumption Dimensions CE mark, CB, CCC, EAC Factory Default Settings and 81 Technical Specifications User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 82
5e) or higher-rated Ethernet cable JGS516PE: 16, of which ports 1-8 are PoE ports JGS524PE: 24, of which ports 1-12 are PoE ports JGS516PE: 100-240 VAC, 50-60Hz, 1.5A maximum JGS524PE: EAC UL/cUL, CE, CCC, EAC, RCM, MSIP, VCCI Factory Default Settings and 82 Technical Specifications User Manual - Netgear GS305E | Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 83
Model JGS524Ev2 technical specifications Feature Network interface Network cable Ethernet ports Power input Power consumption Dimensions (W x D x H) Weight A, CE Class A, VCCI Class A, EAC UL/cUL, CE, CCC, EAC, RCM, MSIP, VCCI Factory Default Settings and 83 Technical Specifications User Manual
User Manual
Gigabit Ethernet Smart Managed Plus
Switches
Models
GS105Ev2
GS105PE
GS108Ev3
GS108PEv3
GS116Ev2
GS305E
GS308E
JGS516PE
JGS524Ev2
JGS524PE
NETGEAR, Inc.
350 E. Plumeria Drive
February 2019
San Jose, CA 95134, USA
202-11700-05