Netgear GS728TPv2 Hardware Installation Guide
Netgear GS728TPv2 Manual
 |
View all Netgear GS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GS728TPv2 manual content summary:
- Netgear GS728TPv2 | Hardware Installation Guide - Page 1
Hardware Installation Guide 24-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports and Insight Cloud Management Models GS728TPv2 GS728TPPv2 GS752TPv2 GS752TPP March 2020 202-12020-02 NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134, USA - Netgear GS728TPv2 | Hardware Installation Guide - Page 2
Dual-function Factory Defaults button on page 17. We revised PoE overview on page 20. The switches now support Insight Cloud Management. We revised Overview on page 6. We added Management options on page 6. We revised Step 9: Manage the switch on page 32. We revised Troubleshooting chart on page - Netgear GS728TPv2 | Hardware Installation Guide - Page 3
Safety instructions and warnings 9 Chapter 2 Hardware Overview Hardware description 13 Front panel 13 LEDs 15 Back panel 16 Switch hardware 17 Dual-function Factory Defaults button 17 USB port 18 Chapter 3 Applications PoE overview 20 Gigabit aggregation switching with PoE 21 Connect - Netgear GS728TPv2 | Hardware Installation Guide - Page 4
24-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports Chapter 5 Troubleshooting Troubleshooting chart 34 PoE troubleshooting suggestions 35 Additional troubleshooting suggestions 36 4 - Netgear GS728TPv2 | Hardware Installation Guide - Page 5
This hardware installation guide is for the following NETGEAR Smart Managed Pro Switches with Insight Cloud Management: • 24-Port Gigabit PoE+ Smart Managed Pro Switch with 4 SFP Ports, Model GS728TPv2 • 24-Port Gigabit PoE+ Smart Managed Pro Switch with 4 SFP Ports, Model GS728TPPv2 • 48-Port - Netgear GS728TPv2 | Hardware Installation Guide - Page 6
-based management interface (in this guide referred to as the local browser interface). In this mode, you can change all settings of the switch. For more information about the local browser interface, see the user manual, which you can download from netgear.com/support/download/. Note: If you plan - Netgear GS728TPv2 | Hardware Installation Guide - Page 7
management, monitor the switch, analyze the switch and network usage, and, if necessary, troubleshoot the switch and the network. For more information about NETGEAR Insight, visit netgear.com/insight and see the NETGEAR knowledge base articles at netgear.com/support. By default, the management mode - Netgear GS728TPv2 | Hardware Installation Guide - Page 8
switch supports the following key hardware features: • 24 or 48 PoE+ Gigabit Ethernet ports. • 4 dedicated SFP ports for 1000BASE-SX, 1000BASE-LX, and 1000BASE-T connectivity. • PoE+ support: - 24 or 48 PoE+ (802.3at) ports - Total PoE+ power budget of 190W (model GS728TPv2), 380W (models GS728TPPv2 - Netgear GS728TPv2 | Hardware Installation Guide - Page 9
Managed Pro Switches with • Auto Uplink™ technology is supported on all ports. • Automatic LEDs and system status LEDs. • NETGEAR green power-saving features: - Energy the port link is down Safety instructions and warnings Use the following safety NETGEAR product, which might not be covered by NETGEAR - Netgear GS728TPv2 | Hardware Installation Guide - Page 10
Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports • Observe and follow service markings: - Do not service any product except as explained system gets wet, see the appropriate section in your troubleshooting guide, or contact your trained service provider. • Do not push any objects into the - Netgear GS728TPv2 | Hardware Installation Guide - Page 11
and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports • Be sure that adapter: - If you were not provided with a power adapter, contact your local NETGEAR reseller. - The power adapter must be rated for the product and for the voltage . Introduction 11 Hardware Installation Guide - Netgear GS728TPv2 | Hardware Installation Guide - Page 12
2 Hardware Overview This chapter describes the switch hardware features. The chapter includes the following sections: • Hardware description • Switch hardware interfaces 12 - Netgear GS728TPv2 | Hardware Installation Guide - Page 13
The switch provides twenty-four or forty-eight 10/100/1000BASE-T RJ-45 PoE+ ports and four SFP ports. The following figures show the front panels. (The front panels do not state the v2 model designation.) Figure 1. Front panel model GS728TPv2 (also applies to model GS728TPPv2) Models GS728TPv2 and - Netgear GS728TPv2 | Hardware Installation Guide - Page 14
-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 1. Front panel Number Single-function Reset button on page 17. 7 Factory Defaults button. For more information, see Dual-function Factory Defaults button on page 17. 8 USB 2.0 port 14 Hardware Installation Guide - Netgear GS728TPv2 | Hardware Installation Guide - Page 15
Pro Switches with 4 SFP Ports LEDs This section describes the LEDs on the front panel of the switch. Table 2. Front panel LEDs LED Description Power LED Solid green. The switch is powered on. Solid yellow. The switch more information, see PoE troubleshooting suggestions on page 35. Link Guide - Netgear GS728TPv2 | Hardware Installation Guide - Page 16
Back panel models GS728TPv2 and GS728TPPv2 Figure 4. Back panel models GS752TPv2 and GS752TPP Switch hardware interfaces The following sections describe the hardware interfaces on the switch. RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity All RJ-45 copper ports support autosensing. When - Netgear GS728TPv2 | Hardware Installation Guide - Page 17
Pro Switches also support Power switch. The switch supports the following NETGEAR NETGEAR SFP transceiver modules and cables, visit netgear.com/business/products/switches/modules-accessories. Single-function Reset button The switch Defaults button The switch provides a dual-function Factory Defaults - Netgear GS728TPv2 | Hardware Installation Guide - Page 18
and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports • Reset the switch to factory default settings and reset the registration status. All settings are erased, the switch restarts with factory default settings, and the NETGEAR registration status is reset. You must reregister the - Netgear GS728TPv2 | Hardware Installation Guide - Page 19
flexibility in configuring network connections. You can use the switch as an aggregation switch in a larger network or as a backbone switch in a small office or home office network to support 10 Mbps, 100 Mbps, and 1 Gbps Ethernet and fiber routers, switches, and hubs. You can connect PoE and PoE - Netgear GS728TPv2 | Hardware Installation Guide - Page 20
depends on the switch model: • GS728TPv2. 24 PoE+ ports with a maximum PoE power budget of 190W • GS728TPPv2. 24 PoE+ the higher-priority, lower-numbered PoE+ ports are supported first. Although a device is listed as an for the Device Device 0 PoE and PoE+ Default power (full) 15.4W 0.44W-12.95W - Netgear GS728TPv2 | Hardware Installation Guide - Page 21
30.0W. For more information about PoE, see the installation guide and user manual, both of which you can download from netgear.com/support/download/. Gigabit aggregation switching with PoE You can use the switch as an aggregation switch that serves as power sourcing equipment (PSE) in a network that - Netgear GS728TPv2 | Hardware Installation Guide - Page 22
Pro Switches with 4 SFP Ports Figure 5. Sample aggregation switching with PoE+ Letter A B C D Line Black Dotted black Green Blue Device Letter Device Switch model GS728TPv2 E Switch model GS108 (Gigabit unmanaged switch such as VoIP phones Applications 22 Hardware Installation Guide - Netgear GS728TPv2 | Hardware Installation Guide - Page 23
Pro Switches with 4 SFP Ports Connect PoE equipment in a business environment The following figure shows an example of how you can connect PoE+ wireless access points, PoE VoIP phones, and PoE surveillance equipment to the switch cameras and VoIP phones Applications 23 Hardware Installation Guide - Netgear GS728TPv2 | Hardware Installation Guide - Page 24
Smart Managed Pro Switches with 4 SFP Ports Connect PoE equipment for surveillance and security The following figure shows an example of how you can connect PoE and non-PoE equipment to the switch for surveillance zoom (PTZ) or FlexPower security cameras Applications 24 Hardware Installation Guide - Netgear GS728TPv2 | Hardware Installation Guide - Page 25
1: Prepare the site • Step 2: Protect against electrostatic discharge • Step 3: Unpack the switch • Step 4: Install the switch • Optional Step 5: Install SFP transceiver modules • Step 7: Connect devices to the switch • Step 7: Check the installation • Step 8: Apply power and check the LEDs • Step - Netgear GS728TPv2 | Hardware Installation Guide - Page 26
Pro Switches with 4 SFP Ports Step 1: Prepare the site Before you install the switch is supplied with the switch. Locate the switch in a position that allows the sides of the switch. Keep at least 2 inches switch must provide adequate airflow. Operating conditions. Keep the switch inside your switch. To - Netgear GS728TPv2 | Hardware Installation Guide - Page 27
24-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports You can also take the following steps to prevent damage from electrostatic discharge (ESD): • When and placing it on a secure and clean surface. 3. Remove all packing material. Installation 27 Hardware Installation Guide - Netgear GS728TPv2 | Hardware Installation Guide - Page 28
Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports 4. Verify that the package contains the following items: a. Switch b. Power cord c. Rubber guide 5. If any item is missing or damaged, contact your local NETGEAR reseller for replacement. Step 4: Install the switch You can install the switch - Netgear GS728TPv2 | Hardware Installation Guide - Page 29
Smart Managed Pro Switches with 4 SFP Ports Install the switch on a flat surface The switch ships with four self-adhesive rubber footpads. To install the switch on a module into one of the SFP ports of the switch. Note: Contact your NETGEAR sales office to purchase these modules. If you do - Netgear GS728TPv2 | Hardware Installation Guide - Page 30
+ Smart Managed Pro Switches with 4 SFP Ports To install an SFP transceiver module: 1. Insert the transceiver into the SFP port. For model GS728TPv2 or model GS728TPPv2, use port the switch The following procedure describes how to connect devices to the switch's RJ-45 ports. The switch supports Auto - Netgear GS728TPv2 | Hardware Installation Guide - Page 31
24-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports Step 7: Check the installation Before you apply power to the switch, perform the following steps. To check the installation: 1. Inspect the equipment thoroughly. 2. Verify that all cables are installed correctly. 3. Check - Netgear GS728TPv2 | Hardware Installation Guide - Page 32
, see netgear.com/support/product/SCC. Note: By default, the DHCP client of the switch is enabled. If the switch cannot get an IP address from a DHCP server, the switch's default IP address is 192.168.0.239 and the default subnet mask is 255.255.255.0. Installation 32 Hardware Installation Guide - Netgear GS728TPv2 | Hardware Installation Guide - Page 33
5 Troubleshooting This chapter provides information about troubleshooting the switch. The chapter includes the following sections: • Troubleshooting chart • PoE troubleshooting suggestions • Additional troubleshooting suggestions 33 - Netgear GS728TPv2 | Hardware Installation Guide - Page 34
24-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports Troubleshooting chart The following table lists symptoms, possible causes, and possible solutions for problems that might occur. Table 5. Troubleshooting chart Symptom The Power LED is off. Possible Cause Power is not - Netgear GS728TPv2 | Hardware Installation Guide - Page 35
48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports PoE troubleshooting suggestions Here are some tips for correcting PoE problems that might occur: • Make the switch permits. Restart the switch to see if the condition resolves itself. Troubleshooting 35 Hardware Installation Guide - Netgear GS728TPv2 | Hardware Installation Guide - Page 36
does not support autonegotiation, the switch determines only the speed correctly, and the duplex mode defaults to half-duplex. The Gigabit Ethernet ports negotiate speed, duplex mode, and flow control if the attached device supports autonegotiation. Troubleshooting 36 Hardware Installation Guide
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
Hardware Installation Guide
24-Port and 48-Port Gigabit PoE+
Smart Managed Pro Switches
with 4 SFP Ports and
Insight Cloud Management
Models
GS728TPv2
GS728TPPv2
GS752TPv2
GS752TPP
NETGEAR, Inc.
350 E. Plumeria Drive
March 2020
San Jose, CA 95134, USA
202-12020-02