Netgear GS750E ProSAFE Plus Switches Configuration Utility User Guide
Netgear GS750E Manual
View all Netgear GS750E manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GS750E manual content summary:
- Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 1
ProSAFE Plus Configuration Utility User Manual July 2018 202-10524-09 350 East Plumeria Drive San Jose, CA 95134 USA - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 2
Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources. Conformity For the current EU Declaration - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 3
7 Chapter 2 Manage Network Settings Specify IP Address Settings for the Switch 10 Manage Quality of Service Enable 802.1p/DSCP-Based Quality of Service 17 Configure Port-Based Quality of Service 18 Saving Options 38 Change the Password 39 Upgrade the Firmware 40 Reboot the Switch 41 Save - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 4
NETGEAR ProSAFE Plus Configuration Utility Restore Factory Default Settings 43 Enable Port Mirroring 44 View Switch Information 45 View the Port Statistics 46 Chapter 6 Diagnostics and Troubleshooting Test Cable Connections 49 Resolve a Subnet Conflict to Access the Switch 50 Uninstall the - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 5
Plus Utility • Access the ProSAFE Plus Utility and Your Switch Note: For more information about the topics covered in this manual, visit the support website at netgear.com/support. Note: New releases of the ProSAFE Plus Configuration Utility are made available from time to time at downloadcenter - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 6
latest version of the utility, visit netgear.com/support/product/PCU. Instead of using the Manual or a user manual that is specific to your switch model. You can download manuals by visiting downloadcenter.netgear the switch in the network and determine its IP address, but you can only use the web - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 7
NETGEAR ProSAFE Plus Configuration Utility If your computer runs a Windows 10 OS, the access, we recommend that you cable the switch to a network with a router or DHCP server that assigns IP addresses, power on the switch, and then use the computer on which the ProSAFE Plus Utility is installed and - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 8
. • Register Now. If the switch is connected to the Internet connection, the NETGEAR website displays and you can register your product. 8. When prompted, enter the password. The default password is password. The Switch Information page displays. 9. Use the utility to configure the switch settings - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 9
2. Manage Network Settings This chapter covers the following topics: • Specify IP Address Settings for the Switch • Manage Multicast Traffic With IGMP Snooping • Set Up Static Link Aggregation Groups 2 9 - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 10
NETGEAR ProSAFE Plus Configuration Utility Specify IP Address Settings for the Switch By default, the switch IP address works as follows: • If you cable the switch to a network with a DHCP server before you power on the switch, the DHCP server assigns an IP address to the switch when the switch is - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 11
NETGEAR ProSAFE Plus Configuration Utility 7. Enter the switch's password in the Password field. The switch's default password is password. 8. Click . The switch maintains a map that shows which links need which IP multicast streams. The switch forwards multicast traffic only to the links - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 12
NETGEAR ProSAFE Plus Configuration Utility 7. Select the IGMP Snooping Status Enable radio button. 8. (Optional) Select the Validate IGMPv3 IP header Enable radio button. Some network devices might not conform to the IGMPv3 standard. When the Validate IGMPv3 IP the router alert IP option (9404) must - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 13
You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select System > Multicast. The previous figure is an example. Your switch might support more or less VLANs for IGMP - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 14
NETGEAR ProSAFE Plus Configuration Utility Note: Static link aggregation (port trunking) is supported on the following models: • GS110EMX • GS116Ev2 • GS408EPP • GS750E • GSS108EPP • GSS116E • JGS516PE • JGS524Ev1 (requires firmware v1.00.15 or a later version) • JGS524Ev2 • JGS524PE • XS512EM • - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 15
NETGEAR ProSAFE Plus Configuration Utility The Switch Status page displays. 6. Select System > LAG > LAG Membership. The previous figure is an example. Your switch might provide a larger number of ports. 7. In the LAG ID menu, select the LAG ID. The number of LAGs that the switch supports depends on - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 16
3. Optimize Performance With Quality of Service This chapter covers the following topics: • Enable 802.1p/DSCP-Based Quality of Service • Configure Port-Based Quality of Service • Set Up Rate Limiting • Set Up Broadcast Filtering 3 16 - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 17
NETGEAR ProSAFE Plus Configuration Utility Enable 802.1p/DSCP-Based Quality of Service 802.1p/DSCP-based password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select QoS. The Quality of Service - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 18
NETGEAR ProSAFE Plus Configuration Utility Configure Port-Based Quality of Service You can assign a priority password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select QoS. The Quality of Service - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 19
NETGEAR ProSAFE Plus Configuration Utility The previous figure is an example. Your switch might provide more or less ports. The 802.1p/DSCP-based radio button is not supported on all models and therefore might not show discovers on the local network. Optimize Performance With Quality of Service 19 - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 20
NETGEAR ProSAFE Plus Configuration Utility 3. Select the switch. If you do not see the switch, click the REFRESH button. 4. Click the APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 21
NETGEAR ProSAFE Plus Configuration Utility Set You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. rate table displays. Optimize Performance With Quality of Service 21 - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 22
NETGEAR ProSAFE Plus Configuration Utility The previous figure is an example. Your switch the Storm control rate menu, select the maximum rate. You can set a rate from 512 Kbps to 512 Mbps. By default, no limit is set. c. Click the APPLY button. Your settings are saved. 10. To set a different rate - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 23
4. Use VLANS for Traffic Segmentation This chapter covers the following topics: • VLAN Overview • Create Basic Port-Based VLANs • Assign Ports to Multiple Port-Based VLANs • Create 802.1Q-Based VLANs in a Basic Configuration • Create 802.1Q-Based VLANs in an Advanced Configuration • Add Tagged or - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 24
NETGEAR ProSAFE Plus Configuration Utility VLAN Overview Virtual LANs (VLANs) button. 4. Click the APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. Use VLANS for Traffic Segmentation 24 - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 25
NETGEAR ProSAFE Plus Configuration Utility The Switch Status page displays. 6. Select VLAN. The Basic of the VLAN. You can enter a VLAN ID from 1 to the maximum number of ports that your switch supports. If all the VLANs share an uplink to the Internet or servers, enter all in the VLAN ID field for - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 26
NETGEAR ProSAFE Plus Configuration Utility Assign Ports to Multiple Port-Based VLANs the APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select VLAN - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 27
NETGEAR ProSAFE Plus Configuration Utility The previous figure is an example. Your switch might lets you assign ports on the switch to a VLAN with an ID number in the range of 1-4093. By default, all ports are members of VLAN 1. In an advanced 802.1Q-based VLAN configuration, you can set up VLANs - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 28
NETGEAR ProSAFE Plus Configuration Utility 2. Launch the ProSAFE Plus Utility using the APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select VLAN > - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 29
NETGEAR ProSAFE Plus Configuration Utility Create 802.1Q-Based VLANs in an Click the APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select VLAN > 802 - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 30
NETGEAR ProSAFE Plus Configuration Utility The previous figure is an example. Your switch might provide more or less ports, all of which are members of VLAN 1 by default. 9. In the VLAN ID field, enter a VLAN ID. You can enter a VLAN ID from 1 to 4093. 10. Click the ADD button. The new VLAN is - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 31
NETGEAR ProSAFE Plus Configuration Utility To add tagged or untagged ports Click the APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select VLAN > - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 32
NETGEAR ProSAFE Plus Configuration Utility 9. To select ports for another VLAN, repeat APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select VLAN - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 33
NETGEAR ProSAFE Plus Configuration Utility The previous figure is an example. Your switch might provide more or less ports. 7. Select one or more ports. 8. Enter the - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 34
Speed • Enable Loop Detection • Manage Power Saving Options • Change the Password • Upgrade the Firmware • Reboot the Switch • Save the Switch Configuration • Restore a Saved Switch Configuration • Restore Factory Default Settings • Enable Port Mirroring • View Switch Information • View the Port - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 35
switch, click the REFRESH button. 4. Click the APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The previous figure is an example. Your switch might provide more or less ports. Note: To - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 36
switch, click the REFRESH button. 4. Click the APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The previous figure is an example. Your switch might provide more or less ports. Note: To - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 37
the REFRESH button. 4. Click the APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select System > Management > Loop Detection. The Loop Detection - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 38
NETGEAR 802.3 MAC sublayer with the 100BASE-TX and 1000BASE-T physical layers to support operation in Low Power Idle (LPI) mode. When LPI mode is to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 39
NETGEAR ProSAFE Plus Configuration Utility 8. Click the APPLY button. Your settings are saved. Change the Password The default password to access the switch is password. We recommend that you change this password to a more secure password. The ideal password contains no dictionary words from any - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 40
5. Click the APPLY button. You are asked to enter the password for the switch. 6. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 7. If the firmware release notice specifies that you must reconfigure the switch, save the - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 41
click the REFRESH button. 4. Click the APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select System > Maintenance > Device Reboot. The Device Reboot - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 42
NETGEAR ProSAFE Plus Configuration Utility Save the Switch Configuration You can save APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select System - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 43
the REFRESH button. 4. Click the APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select System > Maintenance > Restore Configuration. The Restore - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 44
NETGEAR ProSAFE Plus Configuration Utility The Factory Default page displays. 7. Select the check box. 8. Click . You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 45
default, mirroring is disabled. 10. Click the APPLY button. Your settings are saved. View Switch Information You can view the switch product name (model), MAC address, firmware password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 46
NETGEAR ProSAFE Plus Configuration Utility Note: To navigate to this page, select System APPLY button. You are asked to enter the password for the switch. 5. Enter the switch's password in the password field. The switch's default password is password. The Switch Status page displays. 6. Select - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 47
NETGEAR ProSAFE Plus Configuration Utility The previous figure is an example. Your switch might provide more or less ports. 7. To clear the port statistics, click the CLEAR COUNTERS button. All statistics counters change to 0. Manage and Monitor the Switch 47 - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 48
6. Diagnostics and Troubleshooting This chapter covers the following topics: • Test Cable Connections • Resolve a Subnet Conflict to Access the Switch • Uninstall the ProSAFE Plus Utility 6 48 - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 49
's default password is password. The Switch Status page displays. 6. Select System > Monitoring > Cable Tester. The previous figure is an example. Your switch might provide more or less ports. 7. Select one or more check boxes. 8. Click the TEST SELECTED PORT button. Diagnostics and Troubleshooting - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 50
NETGEAR ProSAFE Plus Configuration Utility The you connect it to a network that includes a DHCP server, the switch uses its own default IP address of 192.168.0.239. This subnet might be different from the subnet used in your the Yes button. The utility is removed. Diagnostics and Troubleshooting 50 - Netgear GS750E | ProSAFE Plus Switches Configuration Utility User Guide - Page 51
NETGEAR ProSAFE Plus Configuration Utility To uninstall the utility from a computer that runs a Windows 8.1 OS: 1. On your computer, right-click . 3. Click Uninstall. You are prompted to confirm the uninstall. 4. Click the Yes button. The utility is removed. Diagnostics and Troubleshooting 51
350 East Plumeria Drive
San Jose, CA 95134
USA
July 2018
202-10524-09
ProSAFE
Plus Configuration Utility
User Manual