Netgear GSM4230UP User Manual

Netgear GSM4230UP Manual

Get Netgear GSM4230UP PDF manuals and user guides View all Netgear GSM4230UP manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear GSM4230UP manual content summary:

  • Netgear GSM4230UP | User Manual - Page 1
    Audio Video User Manual AV Line of Fully Managed Switches M4250 Series October 2022 202-12148-06 NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134, USA
  • Netgear GSM4230UP | User Manual - Page 2
    AV Line of Fully Managed Switches M4250 Series Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Regulatory and Legal Si ce produit est vendu au
  • Netgear GSM4230UP | User Manual - Page 3
    Managed Switches M4250 Series (Continued chapters: Log in to the AV UI using the management interface default IP address on page 10 Log in to the AV UI over the total PoE consumption for the switch on page 55 Management interface IP address on page 78, including Set a fixed IP address for manual. 3
  • Netgear GSM4230UP | User Manual - Page 4
    M4250 Series (Continued) Publication Part Publish Date Number Comments 202-12148-03 March 2021 We added the following chapters: Security on page 62 Diagnostics and Troubleshooting changed the following sections: Supported Switches on page 9 Use on page 23 Manage PoE interface settings on page
  • Netgear GSM4230UP | User Manual - Page 5
    Contents Chapter 1 Getting Started with the AV UI Supported Switches 9 Available publications 9 AV local browser UI overview 9 Use a web browser to log in to the AV UI 10 Log in to the AV UI using the management interface default IP address 10 Log in to the AV UI over the OOB port 11 Log
  • Netgear GSM4230UP | User Manual - Page 6
    M4250 Series Change a LAG 38 Remove a LAG 39 Chapter 4 Multicast Configure the multicast mode for one or more ports 42 Add or remove blocked multicast address ranges 43 Display the multicast groups in your network 44 Chapter 5 Power over Ethernet Manage PoE 70 Add a license offline 71 Delete a
  • Netgear GSM4230UP | User Manual - Page 7
    the switch from the AV UI 84 Reset the switch to factory default settings 84 Manually control the fans 85 Display the status of the ports and switch 86 Display the neighboring devices 90 Chapter 9 Diagnostics and Troubleshooting Manage the switch log, console log, and command log 92 Display or
  • Netgear GSM4230UP | User Manual - Page 8
    AV UI This user manual is for the AV Line of Fully Managed Switches M4250 Series and covers all M4250 switch models. This netgear.com/support/download/. You can check for and download new firmware manually. If the features or behavior of your product does not match what is described in this guide
  • Netgear GSM4230UP | User Manual - Page 9
    M4250 Series by visiting netgear.com/support/download. • Installation guide • Hardware installation guide • Main user manual • Audio-video user manual (this manual) • Software administration manual • CLI command reference manual port (also referred to as the service port). • Main local browser user
  • Netgear GSM4230UP | User Manual - Page 10
    AV Line of Fully Managed Switches M4250 Series This manual describes how to use the audio-video (AV) local time that you log in to the switch and you must use the default IP address of the switch, see the information in the installation guide. You can use a web browser to access the switch and log
  • Netgear GSM4230UP | User Manual - Page 11
    Managed Switches M4250 Series 5. over the OOB port You can configure network information on the IPv4 service port, also referred to as the out-of-band (OOB) . 3. Reboot the switch so that the OOB port is set to its default IP address. 4. Launch a web browser. 5. Enter http://192.168.0.239 in Manual
  • Netgear GSM4230UP | User Manual - Page 12
    IP address to switch, determine the IP address by accessing the DHCP server or by using an IP scanner utility. The procedures in this manual assume that you know the IP address of your switch. To use a known IP that your email alerts work, lowers technical support resolution time, and ensures
  • Netgear GSM4230UP | User Manual - Page 13
    AV Line of Fully Managed Switches M4250 Series To register your switch with NETGEAR: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name field, enter admin as the user name, in the Password field,
  • Netgear GSM4230UP | User Manual - Page 14
    : An AV profile template that you configured and assigned to one or more switch ports, to a VLAN, and as an option, to a specific IP address. The chapter contains the following sections: • Overview of preconfigured AV profile templates • About audio video bridging • About PTP residency time stamping
  • Netgear GSM4230UP | User Manual - Page 15
    M4250 Series Overview of preconfigured AV profile templates An AV profile template integrates NETGEAR IP devices and their controller. • Audio Video AVB: Use this template to connect the switch to IP audio devices that support connect the switch to IP video devices and can support devices support
  • Netgear GSM4230UP | User Manual - Page 16
    M4250 Series • Video NDI4: Use this template to connect the switch to video devices and cameras that support IP video devices and their controllers when AES67 audio is supported in the same VLAN. This template can support a license, contact NETGEAR or your local NETGEAR reseller. The IEEE Manual
  • Netgear GSM4230UP | User Manual - Page 17
    The switch supports a PTP end-to-end transparent clock that is used in the PTP residency time stamping feature, which, by default, is you add a network profile that uses AVB (such as Audio AVB), you cannot manually enable PTP residency time stamping. - If PTP residency time stamping is enabled for
  • Netgear GSM4230UP | User Manual - Page 18
    Switches M4250 Series the network profiles that can use it, so you can manually disable PTP residency time stamping (see Configure PTP residency time port. To change the Default VLAN profile: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch.
  • Netgear GSM4230UP | User Manual - Page 19
    AV Line of Fully Managed Switches M4250 Series By default, all ports are selected as 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name field, enter admin Network Profiles Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 20
    AV Line of Fully Managed Switches M4250 Series 5. In the Profile Templates table, to the IP address menu and fields become available. b. From the VLAN IP Settings menu, select Static or DHCP client. By default, None is selected. If you select Static, you must specify the IP address settings manually
  • Netgear GSM4230UP | User Manual - Page 21
    M4250 Series c. If you select Static from the VLAN IP Settings menu, specify the IP address and subnet mask in the VLAN IP Address and Subnet Mask fields. d. To set up the network profile as a DHCP server, from the DHCP Server menu, select DHCP Server, and specify the following settings: • Default IP
  • Netgear GSM4230UP | User Manual - Page 22
    AV Line of Fully Managed Switches M4250 Series The first time that you profile: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name field, enter admin as Network Profiles Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 23
    AV Line of Fully Managed Switches M4250 Series A confirmation window displays. 6. Click the manual, both of which you can download by visiting netgear.com/support/download. To create a custom AV profile template: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP
  • Netgear GSM4230UP | User Manual - Page 24
    M4250 type of service that the the right. By default, multicast is disabled right. By default, PTP is disabled right of the Quality of Service section, click the Add • In an incoming IP packet, the switch applies in the Class of Service (CoS) field. You select allows an incoming IP packet to be mapped
  • Netgear GSM4230UP | User Manual - Page 25
    Managed Switches M4250 Series The • Strict: The switch services traffic with the highest priority on a queue first. By default, the queue management type web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name Manual
  • Netgear GSM4230UP | User Manual - Page 26
    M4250 right of the Quality of Service section, click the Add QoS In the Quality of Service section, click the Save button In the Quality of Service section, next to the In the Quality of Service section, click the Save In the Quality of Service section, next to the the Quality of Service section, click
  • Netgear GSM4230UP | User Manual - Page 27
    Fully Managed Switches M4250 Series Your a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name field, devices. A trunk can carry all active VLANs. By default, the Auto-Trunk feature is enabled on the switch.
  • Netgear GSM4230UP | User Manual - Page 28
    • The Auto-Trunk feature must be supported and globally enabled on the switch and the partner device. (On all M4250 switch models, the Auto-Trunk feature is enabled by default.) • The interconnected ports on both the . Audio-Video Profile Templates 28 and Network Profiles Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 29
    M4250 Series Enable or disable Auto-Trunks By default, the Auto-Trunk feature is globally enabled but you can globally disable it. To enable or disable Auto-Trunks: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP residency time stamping manually, which then
  • Netgear GSM4230UP | User Manual - Page 30
    M4250 Series To globally enable or disable PTP residency time stamping: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP positioned to the right. By default, PTP residency time stamping is enabled the Default network profile with VLAN 1 is enabled by default. You
  • Netgear GSM4230UP | User Manual - Page 31
    Switches M4250 Series To configure the IGMP querier for a network profile: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP Specify the IP address to be used as the source IP address in periodic IGMP queries that are sent on the VLAN. By default, the operational
  • Netgear GSM4230UP | User Manual - Page 32
    AV Line of Fully Managed Switches M4250 Series 8. To save the settings to the running configuration, at the top of the page, click the Save icon or text. Audio-Video Profile Templates 32 and Network Profiles Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 33
    be static or dynamic, and you can configure the LAG as a trunk. The switch can support multiple LAGs. The chapter contains the following sections: • Auto-LAG overview • Enable or disable of the switch, see the main user manual, which you can download by visiting netgear.com/support/download. 33
  • Netgear GSM4230UP | User Manual - Page 34
    , and these links must support the same speed and duplex mode. • The links cannot be members of a manually configured static or dynamic LAG. • LLDP must be enabled on the interconnected ports on the switch and the partner device. (On all M4250 switch models, LLDP is enabled by default on all ports
  • Netgear GSM4230UP | User Manual - Page 35
    AV Line of Fully Managed Switches M4250 Series Note: The switch can support multiple static and dynamic LAGs, but with each partner device, the switch can support a single Auto-LAG only. Enable or disable Auto-LAGs By default, the Auto-LAG feature is globally enabled but you can globally disable it.
  • Netgear GSM4230UP | User Manual - Page 36
    M4250 Series Configure the hash mode for Auto-LAGs By default of your web browser, enter the IP address of the switch. The login page the packet. This is the default mode. • Layer 2; IP address and source TCP or UDP port field in the packet. • Layer 3+4; Destination: Based on the destination IP
  • Netgear GSM4230UP | User Manual - Page 37
    M4250 on a physical interface. By default, the network profile for a LAG is the default profile with VLAN 1. To create a LAG: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP in the packet. This is the default mode. • Layer 2; Source +
  • Netgear GSM4230UP | User Manual - Page 38
    Fully Managed Switches M4250 Series • Layer 3+4; Source: Based on the source IP address and source TCP or UDP port field in the packet. • Layer 3+4; Destination: Based on the destination IP address and destination Select Configure > Link Aggregation. Link Aggregation 38 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 39
    Line of Fully Managed Switches M4250 Series The Link Aggregation Group LAG: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name field, enter admin as Link Aggregation 39 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 40
    AV Line of Fully Managed Switches M4250 Series 7. To save the settings to the running configuration, at the top of the page, click the Save icon or text. Link Aggregation 40 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 41
    other messages. Multicast is best suited for video and audio traffic requiring multicast packet control for optimal operation. Multicast for IPv4 includes support for IGMPv1, IGMPv2, and IGMPv3. The chapter contains the following sections: • Configure the multicast mode for one or more ports • Add
  • Netgear GSM4230UP | User Manual - Page 42
    M4250 Series Configure the multicast mode for one or more ports By default IP traffic is traffic that is destined to a host group. Host groups are identified by class D IP of your web browser, enter the IP address of the switch. The login : • Default: Multicast traffic is This is the default mode. • Force
  • Netgear GSM4230UP | User Manual - Page 43
    Switches M4250 Series we recommend that you set the multicast mode for the port to default mode rather than remove the blockage for the multicast range. For web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name Manual
  • Netgear GSM4230UP | User Manual - Page 44
    AV Line of Fully Managed Switches M4250 Series The Multicast page displays. 5. : 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name field, enter admin as Multicast 44 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 45
    or Use an AV profile template to configure and assign a network profile on page 19). By default, the port is assigned to the Data network profile with VLAN 1. Subscriber Address The IP address of the network device that is subscribed to receive multicast traffic. Subscriber MAC Address The MAC
  • Netgear GSM4230UP | User Manual - Page 46
    : • Manage PoE interface settings • Disable PoE for one or more interfaces • PoE schedules • Display the total PoE consumption for the switch For more information about the PoE management options of the switch, see the main user manual, which you can download by visiting netgear.com/support/download
  • Netgear GSM4230UP | User Manual - Page 47
    models support 8, 24, or 40 PoE+ or PoE++ interfaces with the capacities and budgets that are described in the following table. Table 1. PoE interface capacities and budgets Model PoE Ports Port Capacity Switch PoE Budget M4250-10G2F-PoE+ 8 PoE+ (802.3at) 30W 125W M4250-10G2XF-PoE+ 8 PoE
  • Netgear GSM4230UP | User Manual - Page 48
    not an IEEE 802.3at Class 4 device, the PD does not receive power from the switch. For PoE+ models, 802.3at is the default setting. • Pre-802.3bt: The PoE++ port supports Class 4 devices that use 4-pair PoE (4PPoE) to receive power higher than 30W but that are not compliant with IEEE 802.3bt. The
  • Netgear GSM4230UP | User Manual - Page 49
    priority. • High: High priority. • Critical: Critical priority. 10. Either leave the default power limit type (Class), or, from the Power Limit Type menu, select how the port controls the maximum power that it can deliver: • None: For PoE+ (802.3at) ports, the port draws up to Class 0 maximum power
  • Netgear GSM4230UP | User Manual - Page 50
    one or more interfaces By default, PoE is enabled for all interfaces. You can disable PoE for one or more interfaces. To disable PoE for one or more interfaces: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In
  • Netgear GSM4230UP | User Manual - Page 51
    port to start delivering power. Create a PoE schedule The maximum number of PoE schedules that you can create and add is 100. To create a PoE schedule: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login
  • Netgear GSM4230UP | User Manual - Page 52
    active or inactive), and configure the settings that are associated with your selection from the Recurrence Type menu: • Daily: The schedule works with daily recurrence. This is the default setting. You must set the start and end dates and the start and end times that apply during each day. The
  • Netgear GSM4230UP | User Manual - Page 53
    M4250 time, select a time from End Time menu. • Monthly: The schedule works with monthly recurrence. The fields in the window adjust. You must select Your settings are saved. The window closes. The Power over Ethernet (PoE) page displays again. 10. To save the settings to the running configuration
  • Netgear GSM4230UP | User Manual - Page 54
    M4250 Series Change a PoE schedule You can change an existing PoE schedule. To change a PoE schedule: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP Power over Ethernet (PoE) page displays. 5. In the PoE Schedule table, to the right of the PoE schedule that you
  • Netgear GSM4230UP | User Manual - Page 55
    M4250 (PoE) page displays. 5. In the PoE Schedule table, to the right of the PoE schedule button. The PoE schedule is removed. The window closes. The Power over Ethernet (PoE) page PoE power consumption for the switch: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP
  • Netgear GSM4230UP | User Manual - Page 56
    and LAGs on the switch, you can display the settings and configure the administrative mode of a port or LAG (both of which are enabled by default), the frame size for a port, and the flow control for a port. You can also add port descriptions. Note: In this chapter, we use the term
  • Netgear GSM4230UP | User Manual - Page 57
    AV Line of Fully Managed Switches M4250 Series Administratively enable or disable one or more interfaces By default, all ports and LAGs are administratively enabled. You can manually disable a port or LAG, but this can also occur automatically if a fault or other condition occurs. After a port or
  • Netgear GSM4230UP | User Manual - Page 58
    Managed Switches M4250 Series Add web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name interface supports or is configured to use, including the Ethernet header, CRC, and payload. The default size is 9198.
  • Netgear GSM4230UP | User Manual - Page 59
    M4250 Series To set the frame size for one or more ports or LAGs: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP enter a value from 1500 ( the minimum) to 9198 (the maximum). The default value is 9198. 8. Click the Apply button. Your settings are saved. 9. Manual
  • Netgear GSM4230UP | User Manual - Page 60
    Switches M4250 Series web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name field pause frames, and data loss could occur. This is the default setting. • symmetric: The switch sends pause frames to stop Manual
  • Netgear GSM4230UP | User Manual - Page 61
    M4250 web browser, enter the IP address of the switch. supports an SFP or SFP+ transceiver for a fiber connection. The port speed and duplex mode. The frame size (see Set the frame size for one or more interfaces on page 58). If you did not change the frame size, the default Default VLAN profile on page
  • Netgear GSM4230UP | User Manual - Page 62
    • RADIUS servers • Configure the basic settings for a RADIUS server • Remove a RADIUS server For information about all security options of the switch, see the main user manual, which you can download by visiting netgear.com/support/download. 62
  • Netgear GSM4230UP | User Manual - Page 63
    M4250 control. 802.1X is the default authentication mode. 802.1X is authorized to access system services. For port authentication 1X authentication on page 64), manually set the port authentication mode address field of your web browser, enter the IP address of the switch. The login page displays
  • Netgear GSM4230UP | User Manual - Page 64
    Managed Switches M4250 Series The authentication server. This is the default setting. • Authorized: The authenticator Before you enable 802.1X access authentication globally, manually set the port authentication mode of the uplink port the IP address of the switch. Security 64 Audio Video User
  • Netgear GSM4230UP | User Manual - Page 65
    M4250 Before you enable 802.1X access authentication, manually set the port authentication mode of the uplink gray and is positioned to the left. This is the default setting. 6. Click the Apply button. Your settings are saved the IP address of the switch. The login page displays.
  • Netgear GSM4230UP | User Manual - Page 66
    AV Line of Fully Managed Switches M4250 Series 3. In the Login Name field, enter admin you manage extensive RADIUS settings. For more information, see the main user manual, which you can download by visiting netgear.com/support/download. To configure the basic settings for a RADIUS server: 1. Launch
  • Netgear GSM4230UP | User Manual - Page 67
    M4250 The IP address of the RADIUS server. The switch must be able to reach this IP address. You cannot change the IP address for a RADIUS server that you previously added. • Port Number: The UDP port number used to reach the RADIUS server. The default
  • Netgear GSM4230UP | User Manual - Page 68
    AV Line of Fully Managed Switches M4250 Series The login page displays. 3. In the Login Name field, enter admin as the user name, in the Password field, enter your the settings to the running configuration, at the top of the page, click the Save icon or text. Security 68 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 69
    to factory default settings • Manually control the fans • Display the status of the ports and switch • Display the neighboring devices For information about all management and monitoring options of the switch, see the main user manual, which you can download by visiting netgear.com/support/download
  • Netgear GSM4230UP | User Manual - Page 70
    M4250 Series Licenses Full access to the AV UI requires a license. You can add a license online or offline. For information about purchasing a license, contact NETGEAR or your local NETGEAR NETGEAR license server. To enter the IP address of By default, the contacts the NETGEAR license server.
  • Netgear GSM4230UP | User Manual - Page 71
    AV Line of Fully Managed Switches M4250 Series The switch restarts. During the restart process, do not power down the switch. Add a license offline You can add a license offline. The license must already be activated by a NETGEAR license server and must be located on the computer that you use to
  • Netgear GSM4230UP | User Manual - Page 72
    M4250 Series Delete a license You can delete a license that is no longer valid or that you do not need anymore. To delete a license: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP browser, enter the IP address of the switch. The login page displays. Manage and
  • Netgear GSM4230UP | User Manual - Page 73
    AV Line of Fully Managed Switches M4250 Series 3. In the Login Name field, enter admin as the user name, in the Password field, enter your local device configuration is not saved to the startup configuration (the startup-config file). Manage and monitor the switch 73 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 74
    AV Line of Fully Managed Switches M4250 Series Note: The idle time- : 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name field, enter admin Manage and monitor the switch 74 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 75
    Fully Managed Switches M4250 Series The file browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name can either set the date and time for the switch manually or configure one or more Simple Network Time Protocol (SNTP
  • Netgear GSM4230UP | User Manual - Page 76
    configure one or more SNTP servers. You must know the domain names or IP addresses of the SNTP servers that you want to use. By default, the switch configuration includes one NETGEAR SNTP server, which is time-a.netgear.com. To configure one or more SNTP servers: 1. Launch a web browser. 2. In the
  • Netgear GSM4230UP | User Manual - Page 77
    AV Line of Fully Managed Switches M4250 Series The Overview page displays. 4. In the enter the domain name or IP address for an SNTP server. By default, the SNTP Server Address 1 field contains the NETGEAR SNTP server (time-a.netgear.com), but you can monitor the switch 77 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 78
    interface or enable the DHCP client for the interface so that the interface receives an IP address from a DHCP server in your network. If the management interface does not receive an IP address from a DHCP server, the default IP address for the interface is set to 169.254.100.100 with 255.255.0.0 as
  • Netgear GSM4230UP | User Manual - Page 79
    M4250 Series • Subnet Mask: The IP subnet mask for the management interface. This is also referred to as the subnet/network mask and defines the portion of the interface's IP address that is used to identify the attached network. The default your web browser, enter the IP address of the switch. The
  • Netgear GSM4230UP | User Manual - Page 80
    referred to as the IPv4 service port, is a dedicated Ethernet port for out-of-band (OOB) management of the switch. Traffic on this port is segregated from operational network traffic on the switch ports and cannot be switched or routed to the operational network. By default, no IP address is set for
  • Netgear GSM4230UP | User Manual - Page 81
    and specify the following settings: • OOB IP Address: The static IP address for the OOB port. By default, no IP address is set for the OOB port. • Subnet Mask: The IP subnet mask for the OOB port. By default, no subnet mask is set for the OOB port. • Default Gateway: The gateway through which the
  • Netgear GSM4230UP | User Manual - Page 82
    M4250 Series The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The Overview page displays. 4. In the Device Details section, below the OOB IP 0 to 61440. The default is 32768. The following
  • Netgear GSM4230UP | User Manual - Page 83
    Switches M4250 Series web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name the Primary mode, Neutral mode, or Backup radio button. By default, the Neutral mode radio button is selected. 6. Click the Apply Manual
  • Netgear GSM4230UP | User Manual - Page 84
    M4250 Series Restart the switch from the AV UI You can restart the switch from the AV UI. To restart the switch: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP , its default IP address is 169.254.100.100, the DHCP client is enabled, and the IP address of Manual
  • Netgear GSM4230UP | User Manual - Page 85
    Line of Fully Managed Switches M4250 Series The Maintenance page displays. 5. Click the Factory Default button. A pop-up PoE budgets, and traffic load conditions that affect the fans, see the hardware installation guide, which you can download by visiting netgear.com/support/download. To manually
  • Netgear GSM4230UP | User Manual - Page 86
    radio buttons. • Off: The fans are off and produce no noise. You can only manually set the fans in Off mode. The following models do not support Off mode. - M4250-26G4F-PoE++ - M4250-40G8XF-PoE+ - M4250-40G8XF-PoE++ • Quiet: The fans function from 10, 20, or 25 percent (depends on the model
  • Netgear GSM4230UP | User Manual - Page 87
    AV Line of Fully Managed Switches M4250 Series 3. In the Login Name transceiver module. The port is a PoE port. Depending on the switch model, the port can provide PoE+ or both PoE+ and PoE++. PoE is disabled on the port (see Disable PoE for one or more interfaces on 87 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 88
    Managed Switches M4250 Series ( Version AV UI Version Boot Version System Uptime OOB IP Address Description M4250 by default. This field is fixed. The serial number of the minutes, and seconds since the switch was last started. The IP address for access to the main UI or AV UI over the out-
  • Netgear GSM4230UP | User Manual - Page 89
    M4250 Series (Continued) Field or Graph Management IP Address Description The management IP address for access to the main UI or AV UI over any Ethernet network port of the switch (see Management interface IP network profile. IP Address The IP address that is might be a problem with the fan and
  • Netgear GSM4230UP | User Manual - Page 90
    PoE might be disabled. The fans are placed in Cool mode. To return the switch to normal operation, you must restart the switch. For more information, see the hardware installation guide. The mode can be Off, Quiet, or Cool. For more information, see Manually IP Address. The IP address of the
  • Netgear GSM4230UP | User Manual - Page 91
    diagnose and troubleshoot the switch and its network. The chapter contains the following sections: • Manage the switch log, console log, and command log • Display or download the message log • Display or clear the port statistics • Send a ping, traceroute, or DNS lookup request to an IP address or
  • Netgear GSM4230UP | User Manual - Page 92
    Switches M4250 user manual or the CLI command reference manual, both of which you can download by visiting netgear.com/support/download. By default, the default, the switch log is enabled but the console log and command log are disabled. Diagnostics and Troubleshooting 92 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 93
    M4250 Level 5, normal but significant conditions. This is the default level for switch logging. • Informational: Level 6, browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Troubleshooting 93 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 94
    AV Line of Fully Managed Switches M4250 Series 4. Select Diagnostics > Logs Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name field, enter Diagnostics and Troubleshooting 94 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 95
    AV Line of Fully Managed Switches M4250 Series Table 3. Inbound traffic (Continued) Legend InBcastPkts InDropPkts InBitRate rxError Description The number . 6. Click the Delete button. The port statistics counters are reset to zero. Diagnostics and Troubleshooting 95 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 96
    Managed Switches M4250 Series Send a ping, traceroute, or DNS lookup request to an IP address or displays. 4. Select Diagnostics > Troubleshoot. The Troubleshoot page displays. 5. In the IP Address/Host Name field, specify the IP address or host name. 6. Troubleshooting 96 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 97
    M4250 Series Perform a cable test You can test and display information about the cables that are connected to switch ports. To perform a cable test: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP . Diagnostics and Troubleshooting 97 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 98
    M4250 Series Field Port Test Results Fault Distance Description The port on which the test was performed Normal: The cable is working . 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Troubleshooting 98 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 99
    M4250 Series the command-line interface (CLI) from the AV UI. While you work in the CLI, the AV UI can remain open. To access browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Troubleshooting 99 Audio Video User Manual
  • Netgear GSM4230UP | User Manual - Page 100
    might help troubleshooting a problem. The combined diagnostic files might include the following information: • Configuration file • Buffered log • Tech support file • Crash logs • Full memory dump • Supported MIBs Please do not send files unless instructed to do so by NETGEAR technical support. To
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Audio Video User Manual
AV Line of Fully Managed Switches
M4250 Series
NETGEAR, Inc.
350 E. Plumeria Drive
October 2022
San Jose, CA 95134, USA
202-12148-06