Netgear MS510TXPP Hardware Installation Guide
Netgear MS510TXPP Manual
 |
View all Netgear MS510TXPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear MS510TXPP manual content summary:
- Netgear MS510TXPP | Hardware Installation Guide - Page 1
Hardware Installation Guide 8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports Models MS510TX and MS510TXPP July 2019 202-11763-02 NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134, USA - Netgear MS510TXPP | Hardware Installation Guide - Page 2
Smart Managed Pro Switch with two 10G Ports Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support - Netgear MS510TXPP | Hardware Installation Guide - Page 3
7 Safety instructions and warnings 8 Chapter 2 Hardware Overview Hardware description 13 Front Panel 13 Back panel 15 LEDs 15 Switch hardware interfaces 19 Reset button 20 Factory defaults button 20 USB Port 20 Chapter 3 Applications Multispeed Backbone Switching 22 2.5G Network Storage and - Netgear MS510TXPP | Hardware Installation Guide - Page 4
8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports Chapter 5 Troubleshooting Troubleshooting chart 34 PoE Troubleshooting Suggestions 35 Additional troubleshooting suggestions 36 4 - Netgear MS510TXPP | Hardware Installation Guide - Page 5
the installation guide that came with your switch and applies to the following NETGEAR switch models: • 8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports, Model MS510TX • 8-Port Multi-Gigabit Smart Managed Pro Switch with PoE+ and two 10G Ports, Model MS510TXPP The switch provides - Netgear MS510TXPP | Hardware Installation Guide - Page 6
uplink port (which also supports 5G, 2.5G and 1G); and one dedicated SFP+ fiber uplink port that supports 10G and 1G. All Smart Control Center program for very basic setup. For more information, see the user manual, which you can download from downloadcenter.netgear.com. You can install the switch - Netgear MS510TXPP | Hardware Installation Guide - Page 7
SFP+ fiber uplink port capable of 10G. (The port also supports 1G.) • 1 USB port for configuration and firmware backup and upgrade. • PoE support (model MS510TXPP): - 8 PoE+ (802.3at) ports - Total PoE power budget of 180W for the switch • MAC table size of 16K. • Variable-speed fan that can - Netgear MS510TXPP | Hardware Installation Guide - Page 8
Smart Managed Pro Switch with two 10G Ports - IEEE 802.1p Class of Service • Auto Uplink™ technology is supported on all ports. • Automatic address and system status LEDs. • NETGEAR green power-saving features: - Energy port link is down Safety instructions and warnings Use the following safety Guide - Netgear MS510TXPP | Hardware Installation Guide - Page 9
-Gigabit Smart Managed Pro Switch with two 10G Ports Failure to follow these guidelines can result in damage to your NETGEAR product, which might not be covered by NETGEAR's warranty, to the extent permissible by applicable law. • Observe and follow service markings: - Do not service any product - Netgear MS510TXPP | Hardware Installation Guide - Page 10
8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports • To avoid power adapter: - If you were not provided with a power adapter, contact your local NETGEAR reseller. - The power adapter must be rated for the product and for the voltage (UPS). Introduction 10 Hardware Installation Guide - Netgear MS510TXPP | Hardware Installation Guide - Page 11
8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports • Position system cables, power adapter cables, or power cables carefully. Route cables so your power company for site modifications. • Always follow your local and national wiring rules. Introduction 11 Hardware Installation Guide - Netgear MS510TXPP | Hardware Installation Guide - Page 12
2 Hardware Overview This chapter describes the switch hardware features. The chapter includes the following sections: • Hardware description • Switch hardware interfaces 12 - Netgear MS510TXPP | Hardware Installation Guide - Page 13
8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports Hardware description The following sections describe the switch hardware features. Front Panel Model MS510TX provides four 1G ports, two 2.5G ports, two 5G ports, one 10G port, and one SFP+ port. Model MS510TXPP is a PoE+ model that - Netgear MS510TXPP | Hardware Installation Guide - Page 14
8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports Table 1. Front panel components model MS510TX (Continued) Number Description 8 Port 10: One independent SFP+ port in which you can install transceiver modules (see SFP+ Port for Fiber Connectivity on page 19). 9 - Netgear MS510TXPP | Hardware Installation Guide - Page 15
not for customer use (it is for NETGEAR technical support only), and the AC power connector. Figure 3. Back panel LEDs This section describes the LED designations of the switch. The following table describes the LEDs on the front panel of model MS510TX. Ports 1-9 come with a single LED each. Port - Netgear MS510TXPP | Hardware Installation Guide - Page 16
Smart Managed Pro Switch with two 10G Ports Table 3. LEDs on the front panel of model MS510TX two LEDs. Table 4. LEDs on the front panel of model MS510TXPP LED Power LED Fan LED Description Solid green. The device problem occurred with the fan. Hardware Overview 16 Hardware Installation Guide - Netgear MS510TXPP | Hardware Installation Guide - Page 17
Smart Managed Pro Switch with two 10G Ports Table 4. LEDs on the front panel of model MS510TXPP information, see PoE Troubleshooting Suggestions on page 35 information, see PoE Troubleshooting Suggestions on page 35 Troubleshooting Suggestions on page 35. Hardware Overview 17 Hardware Installation - Netgear MS510TXPP | Hardware Installation Guide - Page 18
Smart Managed Pro Switch with two 10G Ports Table 4. LEDs on the front panel of model MS510TXPP Gbps. Switch hardware interfaces The following sections describe the hardware interfaces on the switch. RJ- for attaching devices, all RJ-45 ports support Auto Uplink technology. This technology allows - Netgear MS510TXPP | Hardware Installation Guide - Page 19
Smart Managed Pro Switch with two 10G Ports When you insert a cable into the switch's RJ-45 port, the switch MS510TXPP, copper ports 1 through 8 also support Power over Ethernet (PoE+). SFP+ Port for Fiber Connectivity To enable fiber connections on the switch switch. The switch supports the NETGEAR - Netgear MS510TXPP | Hardware Installation Guide - Page 20
to its factory default settings. USB Port The switch provides one USB 2.0 port that lets you upgrade firmware from a disk and back up the configuration to a storage device. A device that you attach to the USB port must comply with the following requirements: • The USB device must support USB - Netgear MS510TXPP | Hardware Installation Guide - Page 21
network connections. This chapter shows application examples with 5G, 2.5G, and 1G connections and, for model MS510TXPP, multispeed PoE+ connections. The chapter includes the following sections: • Multispeed Backbone Switching • 2.5G Network Storage and Redundancy • Multispeed PoE+ Access Points 21 - Netgear MS510TXPP | Hardware Installation Guide - Page 22
Smart Managed Pro Switch with two 10G Ports Multispeed Backbone Switching You can use the switch as a multispeed backbone switch 1G computers. Figure 4. Multi-speed backbone switching Line Color Black Blue Red Description 1G Redundancy You can use the switches to provide 2.5G connections - Netgear MS510TXPP | Hardware Installation Guide - Page 23
Smart Managed Pro Switch with two 10G Ports Figure 5. High-speed network storage switching or server Multispeed PoE+ Access Points Model MS510TXPP supports 8 PoE+ ports. The switch can supply up to 30W PoE+ ( devices exceed the total power budget of the switch, the PoE power to the device on the - Netgear MS510TXPP | Hardware Installation Guide - Page 24
Smart Managed Pro Switch simultaneously when the devices correctly report their PoE class to the switch. The following figure shows an example of how you can NETGEAR WAC720 access point 2.5G PoE connection to a WiFi access point such as a NETGEAR WAC740 access point 10G uplink to a core switch that - Netgear MS510TXPP | Hardware Installation Guide - Page 25
1: Prepare the site • Step 2: Protect against electrostatic discharge • Step 3: Unpack the switch • Step 4: Install the switch • Optional Step 5: Install an SFP Transceiver Module • Step 6: Connect devices to the switch • Step 7: Check the installation • Step 8: Apply power and check the LEDs • Step - Netgear MS510TXPP | Hardware Installation Guide - Page 26
Smart Managed Pro Switch with two 10G Ports Step 1: Prepare the site Before you install the switch is supplied with the switch. Locate the switch in a position that the sides of the switch. Keep at least 2 inches switch must provide adequate airflow. Operating conditions. Keep the switch your switch. To - Netgear MS510TXPP | Hardware Installation Guide - Page 27
8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports You can also take the following switch The following figure shows the package contents. Letter a b c d e f Description Switch Power cord with adapter Category 5e (Cat 5e) flat Ethernet cable Wall-mounting screws Installation guide - Netgear MS510TXPP | Hardware Installation Guide - Page 28
8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports To check the package contents: 1. brackets. g. Installation guide. 5. If any item is missing or damaged, contact your local NETGEAR reseller for replacement. Step 4: Install the switch You can install the switch in a standard 19 - Netgear MS510TXPP | Hardware Installation Guide - Page 29
8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports 5. Tighten the screws with a No. 2 Phillips screwdriver to secure mounting brackets to the rack. Install the switch on a flat surface The switch ships with four self-adhesive rubber footpads. To install the switch on a flat surface: - Netgear MS510TXPP | Hardware Installation Guide - Page 30
Smart Managed Pro Switch with two 10G Ports Note: Contact your NETGEAR switch The following procedure describes how to connect devices to the switch's RJ-45 ports. The switch supports length between the switch and the attached device to 328 feet (100 meters). To connect devices to the switch's RJ-45 - Netgear MS510TXPP | Hardware Installation Guide - Page 31
Smart Managed Pro Switch with two 10G Ports Step 7: Check the installation Before you apply power to the switch switch does not provide an on/off power switch. switch light correctly. When you apply power, the Power LED on the switch Manage the switch The switch contains built- the switch to switch - Netgear MS510TXPP | Hardware Installation Guide - Page 32
of features, or the Smart Control Center program (which requires a Windows-based computer) for very basic setup. For more information about managing the switch, see the user manual, which you can download from downloadcenter.netgear.com. Note: By default, the DHCP client of the switch is enabled. If - Netgear MS510TXPP | Hardware Installation Guide - Page 33
5 Troubleshooting This chapter provides information about troubleshooting the switch. The chapter includes the following sections: • Troubleshooting chart • PoE Troubleshooting Suggestions • Additional troubleshooting suggestions 33 - Netgear MS510TXPP | Hardware Installation Guide - Page 34
8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports Troubleshooting chart The following table lists symptoms, possible causes, and possible solutions for problems that might occur. Table 8. Troubleshooting chart Symptom The Power LED is off. Possible Cause Possible Solution Power - Netgear MS510TXPP | Hardware Installation Guide - Page 35
8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports Table 8. Troubleshooting chart (Continued) switch local browser interface, you can configure the Spanning Tree Protocol (STP) to prevent network loops. PoE Troubleshooting Suggestions Here are some tips for correcting PoE problems - Netgear MS510TXPP | Hardware Installation Guide - Page 36
does not support autonegotiation, the switch determines only the speed correctly, and the duplex mode defaults to half-duplex. The Gigabit Ethernet ports negotiate speed, duplex mode, and flow control if the attached device supports autonegotiation. Troubleshooting 36 Hardware Installation Guide
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
Hardware Installation Guide
8-Port Multi-Gigabit
Smart Managed Pro Switch with two 10G
Ports
Models MS510TX and MS510TXPP
NETGEAR, Inc.
350 E. Plumeria Drive
July 2019
San Jose, CA 95134, USA
202-11763-02