Netgear NBK752 User Manual

Netgear NBK752 Manual

Get Netgear NBK752 PDF manuals and user guides View all Netgear NBK752 manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear NBK752 manual content summary:

  • Netgear NBK752 | User Manual - Page 1
    User Manual Orbi 5G WiFi Mesh System With Built-in 5G Modem Models: Orbi Modem Router NBR750 Orbi Satellite Model RBS750 August 2021 202-12171-01 NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134, USA
  • Netgear NBK752 | User Manual - Page 2
    Orbi 5G WiFi 6 Mesh System Support and Community Visit www.netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Regulatory and Legal Si ce produit est vendu au Canada, vous pouvez
  • Netgear NBK752 | User Manual - Page 3
    LEDs 10 Labels 11 System Requirements 12 Connect your router to a mobile broadband network 14 Install your Orbi Whole Home WiFi System 15 Set Up and Activate Using the NETGEAR Orbi App 15 Set Up and Activate Using the Orbi Router Web Interface......16 Perform a Speed Test 16 Chapter 2 Connect
  • Netgear NBK752 | User Manual - Page 4
    Orbi 5G WiFi 6 Mesh System Enter the PIN or PUK 29 Change the roaming setting 30 Chapter 4 Specify the Wired Internet Settings Manually of Service 49 router's device name 58 Change the LAN TCP/IP settings 58 Use the router as a DHCP server 60 Disable the DHCP server feature in the router
  • Netgear NBK752 | User Manual - Page 5
    Orbi 5G WiFi 6 Mesh System Specify basic WiFi settings 67 Change the WiFi password or security level 68 Set up a guest WiFi network 69 Generate a new backhaul password 70 Set up a bridge for a port group or VLAN tag group 71 Chapter 8 Manage Your Network Update the router and satellite firmware
  • Netgear NBK752 | User Manual - Page 6
    service at home....109 Appendix A Troubleshooting Troubleshoot With the LEDs 111 Power LED Is Off 111 LEDs Never Turn Off 111 Internet LED Is Off 111 Troubleshoot the mobile broadband Internet connection.........112 You cannot log in to the router 112 Changes Not Saved 112 Troubleshoot WiFi
  • Netgear NBK752 | User Manual - Page 7
    LEDs • Orbi Satellite Model RBS750 LEDs • Labels • System Requirements • Connect your router to a mobile broadband network • Install your Orbi Whole Home WiFi System • Perform a Speed Test For more information about the topics covered in this manual, visit the support website at support.netgear.com
  • Netgear NBK752 | User Manual - Page 8
    Orbi 5G WiFi 6 Mesh System Orbi 5G Modem Router Model NBR750 Hardware Overview 1 2 3 4567893 Figure 1. Orbi modem router model front and rear view 1. Ring LED 2. Sync button (also used for WPS connection) 3. SMA LTE antenna connectors (Optional - the satellite does not include antenna connector)
  • Netgear NBK752 | User Manual - Page 9
    Orbi 5G WiFi 6 Mesh System Orbi Satellite Model RBS750 Hardware Overview 1 9 6 78 Figure 2. Orbi satellite model RBS20, front and LED 6. DC power connector 7. Reset button Orbi Modem Router Model NBR750 LEDs You can use the LEDs on the 5G modem router to verify status and connections. The following
  • Netgear NBK752 | User Manual - Page 10
    Orbi 5G WiFi 6 Mesh System Table 1. LED descriptions LED color Pulsing white Solid white Solid magenta Off Description The router is booting or someone pressed the Sync button. The router is resetting to its default factory settings. The router cannot connect to the Internet The router finished
  • Netgear NBK752 | User Manual - Page 11
    Orbi 5G WiFi 6 Mesh System Table 2. Orbi satellite LED descriptions LED Power LED LED Behavior The Power LED is located above the Power On/Off button on the rear panel. • Solid green.
  • Netgear NBK752 | User Manual - Page 12
    Orbi 5G WiFi 6 Mesh System The satellite label shows satellite's serial number and MAC address. The satellite label also shows the same WiFi network name and password that's on the router label. Made in Vietnam Figure 4. Satellite label System Requirements You need the following to install your
  • Netgear NBK752 | User Manual - Page 13
    Orbi 5G WiFi 6 Mesh System - Safari® 1.4 or higher - Google Chrome™ 11.0 or higher • Activated 5G/LTE Nano SIM card Hardware Setup 13 User Manual
  • Netgear NBK752 | User Manual - Page 14
    manually set your 5G/LTE provider's Access Point Name (APN), or do both. 5. If the router cannot connect to the mobile broadband network, access the router 5G/LTE provider. • Ask your 5G/LTE provider for the required APN, and enter the APN in the Orbi router web interface (see Change the 5G/LTE
  • Netgear NBK752 | User Manual - Page 15
    Orbi 5G WiFi 6 Mesh System Install your Orbi Whole Home WiFi System Set up and activate your Orbi router and satellite using the NETGEAR Orbi app. If you do not own a smart phone, you can manually set up and activate your router and satellite without the app. Set Up and Activate Using the NETGEAR
  • Netgear NBK752 | User Manual - Page 16
    Orbi 5G WiFi 6 Mesh System Set Up and Activate Using the Orbi Router Web Interface If you do not want to use the NETGEAR Orbi app to set up and activate your Orbi router and satellite, you can use the instructions in the following sections to help you install your router and satellite. Perform a
  • Netgear NBK752 | User Manual - Page 17
    2 Connect to the Network and Access the Router This chapter contains the following sections: • Connect to the Network • Types of Logins • Use a Web Browser to Access the Router 17
  • Netgear NBK752 | User Manual - Page 18
    Orbi 5G WiFi 6 Mesh System Connect to the Network You can connect to the Orbi network through a wired or WiFi connection. If manually find and select the Orbi router's WiFi network from your WiFi-enabled computer or mobile device. To find and select the WiFi network: 1. Make sure that the router or
  • Netgear NBK752 | User Manual - Page 19
    cannot find this login information, contact your service provider. • WiFi network key or password. Your router is preset with a WiFi network name (SSID) and password for WiFi client access. This information is on the router label. • Orbi app login. Your NETGEAR account credentials that log you in to
  • Netgear NBK752 | User Manual - Page 20
    Orbi 5G WiFi 6 Mesh System access the router, the NETGEAR installation assistant automatically checks to see if your router can connect to your Internet service. Automatic Internet Setup You can set up your router automatically, or you can use a web browser to access the router and set up your
  • Netgear NBK752 | User Manual - Page 21
    you are using the correct configuration information. d. Read Troubleshooting on page 110. If problems persist, register your NETGEAR product and contact NETGEAR technical support. Log In to Orbi Web Interface When you log in to the Orbi, the browser displays the router web interface. You can use the
  • Netgear NBK752 | User Manual - Page 22
    to use your mobile broadband Internet connection is to allow Orbi to detect the mobile broadband Internet connection when you first access the router with a web browser. You can also customize or manually specify your mobile broadband Internet connection settings. This chapter contains the following
  • Netgear NBK752 | User Manual - Page 23
    Orbi 5G WiFi 6 Mesh System Internet connection over mobile broadband By default, when the router powers up with a nano SIM card installed, and if you did not configure mobile broadband as a backup connection only, the router automatically searches for and connects to your 5G/LTE provider's mobile
  • Netgear NBK752 | User Manual - Page 24
    Orbi 5G WiFi 6 Mesh System Use the Setup Wizard to detect the mobile broadband Internet connection You can use the Setup Wizard to detect your mobile broadband Internet connection settings and automatically set up your router. To use the Setup Wizard to detect the mobile broadband Internet
  • Netgear NBK752 | User Manual - Page 25
    Orbi 5G WiFi 6 Mesh System To set up automatic failover: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. 5G/LTE mobile connection. 5. From the Internet Connection Mode menu, select Use Ethernet as Primary and failover to Mobile Network. The router
  • Netgear NBK752 | User Manual - Page 26
    Orbi 5G WiFi 6 Mesh System To change the Internet connection mode to wired Internet only or mobile broadband only: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi the 5G/LTE provider's access point name By default, the router detects the 5G/LTE provider's
  • Netgear NBK752 | User Manual - Page 27
    Orbi 5G WiFi the Apply button. Your settings are saved. Your router tries to connect to the mobile broadband network using is automatic, which lets the router connect to either the 5G/LTE provider's 5G or 4G network band. In Automatic. The router uses the 5G or 4G band (default). Manage
  • Netgear NBK752 | User Manual - Page 28
    Orbi 5G WiFi 6 Mesh System • 4G. The router uses the 4G band only and does not connect to the 5G band. By default, the selection from the menu is Automatic (5G 5G/LTE provider. IMPORTANT: For these settings, follow the directions of your 5G/LTE the 5G/LTE provider requires credentials for the router
  • Netgear NBK752 | User Manual - Page 29
    Orbi 5G WiFi 6 Mesh System Note: The user name and password for the mobile broadband connection are not the same as the user name and password to log in to your router. 6. If the LTE provider requires a specific PDP for the router , contact your 5G/LTE provider. To enter the PIN or PUK:
  • Netgear NBK752 | User Manual - Page 30
    Orbi 5G WiFi 6 Mesh System A login window 5G/LTE provider. 6. Click the Apply button. Your settings are saved. Change the roaming setting For most situations, the roaming setting does not need to be changed. The default setting is to allow the router Mobile Broadband 30 Connection User Manual
  • Netgear NBK752 | User Manual - Page 31
    Orbi 5G WiFi 6 Mesh System By default, the check box is selected and the router can roam. If you clear the check box, the router cannot roam. 6. Click the Apply button. Your settings are saved. Manage the Mobile Broadband 31 Connection User Manual
  • Netgear NBK752 | User Manual - Page 32
    to use your Internet connection is to allow Orbi to detect the Internet connection when you first access the router with a web browser. You can also customize or specify your Internet settings. This chapter contains the following sections: • Manually set up the Internet connection • Specify an
  • Netgear NBK752 | User Manual - Page 33
    Orbi 5G WiFi 6 Mesh System Manually set up the Internet connection You can view or change the router's Internet connection settings. Specify an Internet connection without a login To specify the Internet connection settings: 1. Launch a web browser from a computer or mobile device that is
  • Netgear NBK752 | User Manual - Page 34
    Orbi 5G WiFi WAN connection mode, the router supports many different types of IPv6 Internet connections. For information on Mobile, see Configure the mobile broadband PDP, authentication method, and credentials on page 28 for which you can specify the settings manually
  • Netgear NBK752 | User Manual - Page 35
    Orbi 5G WiFi might not support the DHCv6 client function. • Auto Config. This is the default setting. This setting specifies how the modem router assigns IPv6 experience problems connecting to your ISP or other Internet service, and the technical support of either the ISP or NETGEAR recommends
  • Netgear NBK752 | User Manual - Page 36
    Orbi 5G WiFi 6 Mesh System Note: This MTU is applied on wired connections only. For Mobile Broadband, MTU is negotiated with the 5G/LTE provider. Note: An incorrect MTU setting can cause Internet communication problems you suspect an MTU problem, a common solution is the problem for NETGEAR routers,
  • Netgear NBK752 | User Manual - Page 37
    Orbi 5G WiFi 6 Mesh System Table 3. Common MTU sizes (Continued) MTU 1436 576 Application Used in PPTP environments or with VPN. Typical value to connect to dial-up ISPs. Specify the Wired Internet 37 Settings User Manual
  • Netgear NBK752 | User Manual - Page 38
    5 Control Access to the Internet The router comes with a built-in firewall that helps protect your home network are used to block Internet sites • Avoid blocking on a trusted computer • Block services from the Internet • Manage network access control lists • Schedule when to block Internet sites and
  • Netgear NBK752 | User Manual - Page 39
    Orbi 5G WiFi 6 Mesh System Allow or block access to your network You can use access control to block access to your network. To set up access control: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi Allow button. Control Access to the Internet 39 User Manual
  • Netgear NBK752 | User Manual - Page 40
    Orbi 5G WiFi a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin that you set. (See Schedule When to Block Internet Sites and Services on page 56.) • Always. Turn on keyword blocking all the time
  • Netgear NBK752 | User Manual - Page 41
    Orbi 5G WiFi 6 Mesh System For example: • Specify XXX to Click the Add Keyword button. The keyword is added to the keyword list. The keyword list supports up to 32 entries. 8. Click the Apply button. Keyword blocking takes effect. Delete keywords . Control Access to the Internet 41 User Manual
  • Netgear NBK752 | User Manual - Page 42
    Orbi 5G WiFi or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window services from the Internet You can block Internet services on your network based on the type of service. You can block the services all the time or based on a schedule. To block services
  • Netgear NBK752 | User Manual - Page 43
    Orbi 5G WiFi 6 Mesh System 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Security > Block Services.
  • Netgear NBK752 | User Manual - Page 44
    Orbi 5G WiFi 6 Mesh System Your settings are saved. Manage network access control lists You can use access control to block or allow access to your network. To manage devices that are allowed or blocked: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi
  • Netgear NBK752 | User Manual - Page 45
    can email you its logs of router activity. The log records router activity and security events such as attempts to access blocked sites or services. To set up email notifications: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com
  • Netgear NBK752 | User Manual - Page 46
    Orbi 5G WiFi 6 Mesh System The user name is admin. The password is the one that you specified the first time that you logged in. The user name time, and select the am or pm radio button. 12. Click the Apply button. Your settings are saved. Control Access to the Internet 46 User Manual
  • Netgear NBK752 | User Manual - Page 47
    Orbi 5G WiFi 6 Mesh System Logs are sent automatically. If the log fills before the specified time, it is sent. After the log is sent, it is cleared from the router memory. If the router cannot email the log and the log buffer fills, the router overwrites the log. Control Access to the Internet 47
  • Netgear NBK752 | User Manual - Page 48
    6 Optimize Performance This chapter contains the following sections: • Enable or disable Wi-Fi Multimedia Quality of Service • Improve network connections with Universal Plug and Play 48
  • Netgear NBK752 | User Manual - Page 49
    Orbi 5G WiFi 6 Mesh System Enable or disable Wi-Fi Multimedia Quality of Service Wi-Fi Multimedia Quality of Service (WMM QoS) prioritizes WiFi voice and video traffic over the WiFi link. WMM QoS is automatically enabled. WMM QoS prioritizes WiFi data packets from different applications based on
  • Netgear NBK752 | User Manual - Page 50
    Orbi 5G WiFi 6 Mesh System other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network. If you On check box is cleared, the router does not allow any device to automatically control router resources, such as port forwarding. Manual
  • Netgear NBK752 | User Manual - Page 51
    Orbi 5G WiFi 6 Mesh System The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. Hops are the steps a packet takes between routers. The number of hops can range from 1 to 255. UPnP Portmap Table, click the Refresh button. Optimize Performance 51 User Manual
  • Netgear NBK752 | User Manual - Page 52
    as a DHCP server • Disable the DHCP server feature in the router • Manage reserved LAN IP addresses • Manage custom static routes • Specify basic WiFi settings • Change the WiFi password or security level • Set up a guest WiFi network • Generate a new backhaul password • Set up a bridge for a port
  • Netgear NBK752 | User Manual - Page 53
    Orbi 5G WiFi 6 Mesh System View or change WAN settings You can view or configure wide area network (WAN) settings for the Internet port. You can set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable the router of service allows your router to be router
  • Netgear NBK752 | User Manual - Page 54
    Orbi 5G WiFi router to use Dynamic DNS. Then the router notifies the Dynamic DNS service provider whenever its IP address changes. When you access your Dynamic DNS account, the service free NETGEAR account: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi Manual
  • Netgear NBK752 | User Manual - Page 55
    Orbi 5G WiFi 6 Mesh System 4. Select ADVANCED > Advanced > Dynamic DNS. The Dynamic DNS page displays. 5. Select the Use a Dynamic DNS Service check box. 6. In the Service Provider list, select NETGEAR. 7. Select the No radio button. 8. In the Host Name field, type the name that you want to use for
  • Netgear NBK752 | User Manual - Page 56
    Orbi 5G WiFi 6 Mesh System 6. In the Service Name field, enter the user name for your account. 10. For a NETGEAR account, in the Email field, type the email address for your account. . 13. To verify that your Dynamic DNS service is enabled in the router, click the Show Status button. A message Manual
  • Netgear NBK752 | User Manual - Page 57
    Orbi 5G WiFi 6 Mesh System Set up a default DMZ server The default DMZ server feature is helpful when you are using some online games and videoconferencing applications that are incompatible with Network Address Translation (NAT). The router is programmed to recognize some of these applications and
  • Netgear NBK752 | User Manual - Page 58
    Orbi 5G WiFi 6 Mesh System Change the router's device name The router's device name is its model number. This device name displays in a file manager when you browse your network. To change the router's device name: 1. Launch subnets with the same IP scheme. Specify Network Settings 58 User Manual
  • Netgear NBK752 | User Manual - Page 59
    Orbi 5G WiFi 6 Mesh System To change the LAN TCP/IP settings: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one
  • Netgear NBK752 | User Manual - Page 60
    Orbi 5G WiFi 6 Mesh System If you changed the LAN IP address of the router, you are disconnected when this change takes effect. 9. To reconnect, close your browser, relaunch it, and log in to the router. Use the router as a DHCP server By default, the router subnet as the router. The default
  • Netgear NBK752 | User Manual - Page 61
    Orbi 5G WiFi 6 Mesh System 7. Click the Apply button. Your settings are saved. The router delivers the following parameters to any LAN device that requests DHCP: • An IP address from the range that you defined • Subnet mask • Gateway IP address (the router's LAN IP address) • DNS server IP address (
  • Netgear NBK752 | User Manual - Page 62
    Orbi 5G WiFi 6 Mesh System Manage reserved LAN IP addresses When you specify a reserved IP address for a computer on the LAN, that computer always receives the same IP address each time it accesses the router Choose an IP address from the router's LAN subnet, such as 192 contacts the router's DHCP
  • Netgear NBK752 | User Manual - Page 63
    Orbi 5G WiFi 6 Mesh System Edit a reserved IP address To edit a reserved address entry: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login LAN Setup. The LAN Setup page displays. Specify Network Settings 63 User Manual
  • Netgear NBK752 | User Manual - Page 64
    Orbi 5G WiFi 6 Mesh System 5. Select the radio button next to the reserved address. 6. Click the Delete button. The address is removed. Manage custom static routes Typically, you do not need to add static routes unless you use multiple routers network, your router forwards your the ISDN router at 192
  • Netgear NBK752 | User Manual - Page 65
    Orbi 5G WiFi as the router. 12. Type a number from 2 through 15 as the metric value. This value represents the number of routers between your network Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. Specify Network Settings 65 User Manual
  • Netgear NBK752 | User Manual - Page 66
    Orbi 5G WiFi 6 Mesh System The user name is admin. The password is the one that you specified the first time that you logged in. The user name the table, select the radio button for the route. 6. Click the Delete button. The route is removed from the table. Specify Network Settings 66 User Manual
  • Netgear NBK752 | User Manual - Page 67
    Orbi 5G WiFi 6 Mesh System Specify basic WiFi settings The router and satellite come preset with the same WiFi network name (SSID) and the same WiFi security. You can find the SSID and password on the router label and on the satellite label. If you log in to the router and change the WiFi settings,
  • Netgear NBK752 | User Manual - Page 68
    Orbi 5G WiFi 6 Mesh System 7. Click the Apply button. Your settings are saved. The router sends the new settings to the satellite. If you are using a WiFi connection and you changed the SSID, you are disconnected from the network. 8. Make sure that you can connect to the WiFi 68 User Manual
  • Netgear NBK752 | User Manual - Page 69
    Orbi 5G WiFi 6 Mesh System 5. Under Security Options, select a WPA radio button: • WPA2-PSK [AES] • WPA-PSK [TKIP] + WPA2-PSK [AES] • WPA3-Personal [SAE] The WPA3 option uses the newest standard for the strongest security. Some older computers and WiFi devices cannot use WPA3 or WPA2. If your
  • Netgear NBK752 | User Manual - Page 70
    Orbi 5G WiFi 6 Mesh System 6. To change the network name, type a new name in the Guest Wireless Network Name (SSID) field. The name can be up to 32
  • Netgear NBK752 | User Manual - Page 71
    Orbi 5G WiFi 6 Mesh System To generate a new backhaul password: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi the Generate button. The router generates a new backhaul password connection entirely so that the router uses a wired Internet connection only
  • Netgear NBK752 | User Manual - Page 72
    Update the router and satellite firmware • Change the admin password • Enable admin password reset • Reset the admin password • View router status and connection status • View satellite status • View and manage logs of router activity • View devices connected to the network or edit device information
  • Netgear NBK752 | User Manual - Page 73
    Orbi 5G WiFi 6 Mesh System Update the router and satellite firmware You can use the router web interface to check if new firmware is available and update your router and satellite, or you can manually update the firmware for your router and satellite. Check for firmware updates To check for new
  • Netgear NBK752 | User Manual - Page 74
    Orbi 5G WiFi 6 Mesh System Manually update firmware If a satellite is connected to your router, you can log in to the router to manually upload the firmware on your satellite. WARNING: We recommend that you always update the firmware on your satellite first, and then update your router. Also, do
  • Netgear NBK752 | User Manual - Page 75
    Orbi 5G WiFi 6 Mesh System 7. If the browser ask you for the admin password, enter the same password that you entered for the router. 8. Click the BROWSE button. 9. Locate and select the satellite firmware file that you downloaded. The firmware Reset check box. Manage Your Network 75 User Manual
  • Netgear NBK752 | User Manual - Page 76
    Orbi 5G WiFi 6 Mesh System We recommend that you enable password reset. 7. Click the Apply button. Your settings are saved. Enable admin password reset The router admin password is used to log in to your router web interface. We recommend that you enable the password reset feature so that you can
  • Netgear NBK752 | User Manual - Page 77
    Orbi 5G WiFi 6 Mesh System To reset your admin password: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Click the Cancel button. If password reset is enabled, you are prompted to enter the router's
  • Netgear NBK752 | User Manual - Page 78
    Orbi 5G WiFi 6 Mesh System Display Internet port statistics To display Internet port statistics: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi since the router was last manual clear. - Collisions. The number of collisions on this port since reset or manual
  • Netgear NBK752 | User Manual - Page 79
    Orbi 5G WiFi 6 Mesh System Check the Internet connection status To check the Internet connection status: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi connected to the router. • DNS Server. The IP address of the Domain Name Service server that provides Manual
  • Netgear NBK752 | User Manual - Page 80
    Orbi 5G WiFi 6 Mesh System Check the mobile broadband Internet connection status You can view information about the mobile broadband Internet connection, including the 5G/LTE provider, type of service, and signal strength. To check the mobile broadband Internet connection status: 1. Launch a web
  • Netgear NBK752 | User Manual - Page 81
    Orbi 5G WiFi 6 Mesh System • Operator. The 5G/LTE provider. • DNS Server.DNS Server. The IP address of the 5G/LTE provider's Domain Name Service strong signal. • Network Type. The 5G/LTE network type. • E/U/ARFCN . The Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the router
  • Netgear NBK752 | User Manual - Page 82
    Orbi 5G WiFi 6 Mesh System The BASIC Home page displays. 4. Select same admin user name and password that you entered for the router. The satellite's status displays. View and manage logs of router activity The log is a detailed record of the websites button. Manage Your Network 82 User Manual
  • Netgear NBK752 | User Manual - Page 83
    This section displays how the device is connected to the Orbi network through a wired Ethernet connection or WiFi connection. • Connected Orbi. This section displays the Orbi router or satellite that the device is connected to. The Orbi router's or satellite's MAC address also displays. Manage Your
  • Netgear NBK752 | User Manual - Page 84
    Orbi 5G WiFi 6 mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the router admin user name and password. The user to your Orbi network. You can also edit the information that displays on the Attached Devices page in the router web interface.
  • Netgear NBK752 | User Manual - Page 85
    The satellite's IP address can change because the router assigns an IP address to each satellite when Orbi network through a wired Ethernet connection or 2G or 5G WiFi connection. • Connected Orbi. This section displays the Orbi router or satellite that the satellite is connected to. The Orbi router
  • Netgear NBK752 | User Manual - Page 86
    Orbi 5G WiFi 6 Mesh System A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified > Traffic Meter. The Traffic Meter page displays. 5. Select the Enable Traffic Meter check box. Manage Your Network 86 User Manual
  • Netgear NBK752 | User Manual - Page 87
    Orbi 5G WiFi , click the Restart Counter Now button. 9. If you want the router to issue a warning message before the monthly limit of Mbytes or hours Status button. Manage the router configuration file The configuration settings of the router are stored within the router in a configuration file. You
  • Netgear NBK752 | User Manual - Page 88
    Orbi 5G WiFi 6 Mesh System Back up settings To back up the router's configuration settings: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. button. The file is uploaded to the router and the router reboots. Manage Your Network 88 User Manual
  • Netgear NBK752 | User Manual - Page 89
    Before you can use remote access with the Orbi app, you must update your router's firmware and download the latest Orbi app for your mobile device. To download the latest Orbi app for your mobile device, visit https://www.netgear.com/home/apps-services/orbi-app. Manage Your Network 89 User Manual
  • Netgear NBK752 | User Manual - Page 90
    9 Customize Internet Traffic Rules for Ports You can use port forwarding and port triggering to set up rules for Internet traffic. You need networking knowledge to set up these features. This chapter includes the following sections: • Manage port forwarding to a local server • Manage port triggering
  • Netgear NBK752 | User Manual - Page 91
    Orbi 5G WiFi The router can router of service, application the service. connected to your Orbi network. 4. Enter service type. 8. From the Service Name menu, select the service name. If the service that you want to add is not in the menu, create a custom service. See Add a custom port forwarding service
  • Netgear NBK752 | User Manual - Page 92
    Orbi 5G WiFi 6 Mesh System The service displays in the table. Add a custom port forwarding service To add a custom service: 1. Find out which port number or range of numbers the application uses. You can table. 13. Click the Apply button. Customize Internet Traffic Rules 92 for Ports User Manual
  • Netgear NBK752 | User Manual - Page 93
    Orbi 5G WiFi 6 Mesh System Your settings are saved. The service is now in the table on the Port Forwarding / Port Triggering page. Edit a port forwarding service To edit a port forwarding entry: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter
  • Netgear NBK752 | User Manual - Page 94
    Orbi 5G WiFi 6 Mesh System Delete a port forwarding entry To delete a port forwarding entry: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi service name. 7. Click the Delete Service button. The port forwarding entry is removed from the table. How the router
  • Netgear NBK752 | User Manual - Page 95
    Orbi 5G WiFi 6 Mesh System 5. Your router performs Network Address Translation (NAT) on the source IP address, and sends the reply through the Internet to the computer or WiFi Port Forwarding/Port Triggering page, configure the router to forward the HTTP service to the local address of your web Manual
  • Netgear NBK752 | User Manual - Page 96
    Orbi 5G WiFi 6 Mesh System Add a port triggering service To add a port triggering service: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A Ending Port fields. Customize Internet Traffic Rules 96 for Ports User Manual
  • Netgear NBK752 | User Manual - Page 97
    Orbi 5G WiFi 6 Mesh System 13. Click the Apply button. The service mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A box is selected, the router does not use port triggering router detects no activity. This value is required because the router tell the router to open more
  • Netgear NBK752 | User Manual - Page 98
    Orbi 5G WiFi you can tell the router, "When you initiate router. 3. Your router router of 6667, your router creates another session router with destination port 113. 6. When your router computer. The router replaces the router eventually senses a period of inactivity in the communications. The router
  • Netgear NBK752 | User Manual - Page 99
    networking (VPN). This chapter explains how to set up and use VPN access. This chapter includes the following sections: • Set up a VPN connection • Specify VPN service in the router • Install OpenVPN software • Use a VPN tunnel on your Windows-based computer • Use VPN to access your Internet
  • Netgear NBK752 | User Manual - Page 100
    account with a host name (sometimes called a domain name). You use the host name to access your network. The router supports these accounts: NETGEAR, No-IP, and Dyn. If your Internet service provider (ISP) assigned a static WAN IP address (such as 50.196.x.x or 10.x.x.x) that never changes to your
  • Netgear NBK752 | User Manual - Page 101
    Orbi 5G WiFi 6 Mesh System 6. To change the TUN mode service type, select the UCP or TCP radio button. 7. To change the TUN mode service port, type the port number that you want to use in the field. The default port number is 12973. 8. To change the TAP mode service router router to your Orbi network.
  • Netgear NBK752 | User Manual - Page 102
    Orbi 5G WiFi 6 Mesh System 5. Make sure that the Enable VPN Service check box is selected. 6. Specify any VPN service settings on the page. For more information, see Specify VPN service in the router on page 100. 7. and click the I Agree button. Use VPN to Access Your Network 102 User Manual
  • Netgear NBK752 | User Manual - Page 103
    Orbi 5G WiFi 6 Mesh System 13. Leave the check boxes selected, and \config\ by default. 18. For a client device with Windows, modify the VPN interface name to NETGEAR-VPN: a. On your computer, go to the Networks page. If you are using Windows 10, select VPN to Access Your Network 103 User Manual
  • Netgear NBK752 | User Manual - Page 104
    Orbi 5G WiFi 6 Mesh System c. Select the local area connection and change its name (not its device name) to NETGEAR-VPN. If you do not change the VPN interface name, the VPN tunnel connection will fail. For more information about using OpenVPN on your Windows-
  • Netgear NBK752 | User Manual - Page 105
    Orbi 5G WiFi 6 Mesh System Install OpenVPN software on an iOS device You must install this software on each iOS device that you plan to use for VPN connections to your router. To install VPN client software on an iOS device: 1. Launch a web browser from a computer or mobile device that is connected
  • Netgear NBK752 | User Manual - Page 106
    Orbi 5G WiFi 6 Mesh System To install VPN client software on an Android device: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The
  • Netgear NBK752 | User Manual - Page 107
    Orbi 5G WiFi 6 Mesh System established, you cannot access your home router or your home network with the OpenVPN software. The default LAN IP address scheme for the router is 192.x.x.x.The most . You can launch a web browser and log in to your router. Use VPN to Access Your Network 107 User
  • Netgear NBK752 | User Manual - Page 108
    Orbi 5G WiFi 6 Mesh System Use VPN to access your Internet service at home When you're away from home and you access the Internet, you usually use a local Internet service provider. For example, at a coffee shop you might be given a code that lets you use the coffee shop's Internet service account
  • Netgear NBK752 | User Manual - Page 109
    Orbi 5G WiFi 6 Mesh System Block VPN client Internet access in the router By default, the router is set up to allow VPN connections only to your home network, not to the Internet service for your home network. If you changed this setting to allow Internet access, you can change it back. To allow
  • Netgear NBK752 | User Manual - Page 110
    and solve problems you might experience with your Orbi router or satellite. If you do not find the solution here, check the NETGEAR support site at support.netgear.com for product and contact information. This chapter includes the following sections: • Troubleshoot With the LEDs • Troubleshoot the
  • Netgear NBK752 | User Manual - Page 111
    Orbi 5G WiFi 6 Mesh System Troubleshoot With the LEDs You can use the LEDs on the front panel of the mobile router for troubleshooting. Power LED Is Off • Make sure that the power adapter is securely connected to your mobile router and securely connected to a working power outlet. • Check that you
  • Netgear NBK752 | User Manual - Page 112
    Orbi 5G WiFi 6 Mesh System Troubleshoot the mobile broadband Internet connection If your router cannot access the Internet over a mobile broadband connection, check the following: • Make sure that the nano SIM card is inserted correctly into the router. • Check with your 5G/LTE provider to ensure
  • Netgear NBK752 | User Manual - Page 113
    Orbi 5G WiFi 6 Mesh System Troubleshoot WiFi connectivity If you are experiencing trouble connecting to the Orbi WiFi network, try to isolate the problem: • Can your WiFi-enabled computer or mobile device that you are using find your WiFi network? • Does your WiFi-capable device support the
  • Netgear NBK752 | User Manual - Page 114
    Orbi 5G WiFi problems might router on page ?. If you do not receive replies, check the following: • Check to see that the IP address of your router is listed as the default gateway for your computer. If DHCP assigns the IP configuration of your computers, this Troubleshooting 114 User Manual
  • Netgear NBK752 | User Manual - Page 115
    synced, and the connection between the router and satellite is good. • Amber. The Orbi router and satellite failed to sync. Try repeating Step 4 again. If the sync keeps failing, try moving the satellite to a different location that's closer to the router. Troubleshooting 115 User Manual
  • Netgear NBK752 | User Manual - Page 116
    Orbi 5G WiFi 6 Mesh System 6. Move the satellite to a new location and connect the satellite lights amber, move the satellite closer to the router and try again. The satellite must be within range of the router's WiFi cover area for a good connection to the router. Troubleshooting 116 User Manual
  • Netgear NBK752 | User Manual - Page 117
    B Supplemental Information This appendix covers the following topics: • Reset to Factory Settings • Technical Specifications 117
  • Netgear NBK752 | User Manual - Page 118
    Orbi 5G WiFi 6 Mesh System Reset to Factory Settings You can return the modem router and satellite to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the modem router or satellite for at least seven seconds. The modem router or
  • Netgear NBK752 | User Manual - Page 119
    Orbi 5G WiFi 6 Mesh System Table 4. Factory default settings for the modem router (Continued) Feature Default Setting Local network (LAN) LAN IP Subnet mask 192.168.1.1 255.255 going out to the Enabled (all) Internet) Source MAC filtering Disabled Supplemental Information 119 User Manual
  • Netgear NBK752 | User Manual - Page 120
    Orbi 5G WiFi 6 Mesh System Table 4. Factory default settings for the modem router (Continued) Feature WiFi WiFi Channel 157 WW: Channel 108 Factory Settings for Orbi Satellite Model RBS750 The following table shows the factory settings for the satellite Feature Router login User login URL User
  • Netgear NBK752 | User Manual - Page 121
    Orbi 5G WiFi 6 Mesh System Table 5. Factory default settings for the satellite (Continued) Feature Default Setting Internet WAN MAC address Internet) Outbound (communications going out to the Internet) Enabled (all) Source MAC filtering Disabled Supplemental Information 121 User Manual
  • Netgear NBK752 | User Manual - Page 122
    Orbi 5G WiFi 6 Mesh System Table 5. Factory default settings for the satellite (Continued) Feature WiFi WiFi Orbi modem router and satellite. Technical Specifications for Orbi Modem Router NBR750 The following table shows the technical specifications for the modem router. Table 6. Modem router
  • Netgear NBK752 | User Manual - Page 123
    Orbi 5G WiFi 6 Mesh System Table 6. Modem router specifications (Continued) Feature Weight Operating temperature Operating humidity Electromagnetic emissions LAN WAN WiFi Description 2.75 lb (1247 g) 0° to 40°C (32º to 104ºF) 90% maximum relative humidity, noncondensing FCC Part 15 Class B EN
  • Netgear NBK752 | User Manual - Page 124
    Orbi 5G WiFi 6 Mesh System Table 6. Modem router specifications (Continued) Feature Description Maximum number of computers per wireless network Limited by the amount of WiFi network traffic generated by each , lower actual data throughput rate. Supplemental Information 124 User Manual
  • Netgear NBK752 | User Manual - Page 125
    Orbi 5G WiFi 6 Mesh System Table 7. Technical specifications for Orbi satellite model RBS750 ( support Data encoding standards radio 2 IEEE 802.11a/n/ac/ax 5GHz-1024-QAM support Data encoding standards radio 3 IEEE 802.11a/n/ac/ax 5GHz-1024-QAM support Supplemental Information 125 User Manual
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
User Manual
Orbi 5G WiFi Mesh System
With Built-in 5G Modem
Models:
Orbi Modem Router NBR750
Orbi Satellite Model RBS750
NETGEAR, Inc.
350 E. Plumeria Drive
August 2021
San Jose, CA 95134, USA
202-12171-01