Netgear SRX5308 Client-to-Box VPN configuration using ProSafe Client Lite soft
Netgear SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Manual
 |
UPC - 606449065145
View all Netgear SRX5308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear SRX5308 manual content summary:
- Netgear SRX5308 | Client-to-Box VPN configuration using ProSafe Client Lite soft - Page 1
the ProSafe VPN Lite Client in order to allow a Virtual Private Network to be established over the Internet. NOTE: This document assumes that your router is either receiving a public IP address on the WAN interface or that the gateway device(s) have the correct port forwarding or DMZ configured so - Netgear SRX5308 | Client-to-Box VPN configuration using ProSafe Client Lite soft - Page 2
Page 2 of 8 Router Settings: As we configure the NETGEAR VPN Router, there will be information we'll add which will later be used in the configuration of the ProSafe VPN Lite Client. This information will be marked with rednumbered circles. You can print this form to help keep track of this - Netgear SRX5308 | Client-to-Box VPN configuration using ProSafe Client Lite soft - Page 3
Information: The Local Identifier can be any alphanumeric string. It is a name that identifies the local peer (Router) in the VPN Connection. You can leave the default or create your own identifier. • WAN Interface: If your router has more than one WAN Interface, you'll be prompted to select which - Netgear SRX5308 | Client-to-Box VPN configuration using ProSafe Client Lite soft - Page 4
the policy we created in the list of VPN Policies. Make note of the following: ➍ ➎ ➍ Router's LAN Network IP Address: The first segment in the "Local" box. In our screenshot described as 192.168.1.0 - but may change depending on the setup of your router. ➎ Router's LAN Network Mask: The second - Netgear SRX5308 | Client-to-Box VPN configuration using ProSafe Client Lite soft - Page 5
the VPN Policy on the ProSafe Lite Client: Page 5 of 8 • After installing and activating the VPN Lite Client software, right-click on the VPN Client tray icon and select Configuration Panel. • Select Config Wizard from the VPN Configuration option in the menu. • Select "A router or a VPN gateway - Netgear SRX5308 | Client-to-Box VPN configuration using ProSafe Client Lite soft - Page 6
be the value of your Router's WAN IP or FQDN. ➊ Input the PreShared Key used when creating the VPN Policy on the Router. ➍The value of the Internal IP address of remote network field will be the value of your remote Router's LAN Network IP Subnet. • Review the Configuration Summary and click Finish - Netgear SRX5308 | Client-to-Box VPN configuration using ProSafe Client Lite soft - Page 7
make sure that it is the remote Router's WAN IP or FQDN. ➏ • Click on the policy name, then select the P1 Advanced button. • Check Aggressive Mode. ➋ Select DNS and enter the router's Remote Identifier Information. ➌ Select DNS and enter the router's Local Identifier Information. • Click OK to - Netgear SRX5308 | Client-to-Box VPN configuration using ProSafe Client Lite soft - Page 8
Page 8 of 8 Connecting: To connect and establish the VPN tunnel between the VPN Lite Client and the remote router, click on Tunnel1, then Open Tunnel. If your settings are correct you'll receive a message confirming the connection. Open Tunnel Connection Status Version 1.2
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Page
1
of
8
Version 1.2
VPN Configuration of ProSafe VPN Lite software and NETGEAR ProSafe
Router:
This document will guide you on how to create IKE and auto-VPN policies for your ProSafe
NETGEAR Router, as well as how to configure the ProSafe VPN Lite Client in order to allow a
Virtual Private Network to be established over the Internet.
NOTE:
This document assumes that your router is either receiving a public IP address on the
WAN interface or that the gateway device(s) have the correct port forwarding or DMZ configured
so that port 500 UDP is open for the router, these gateway devices must also allow VPN pass-
through.