NordicTrack C 1650 Instruction Manual

NordicTrack C 1650 Manual

Get NordicTrack C 1650 PDF manuals and user guides View all NordicTrack C 1650 manuals
Add to My Manuals
Save this manual to your list of manuals

NordicTrack C 1650 manual content summary:

  • NordicTrack C 1650 | Instruction Manual - Page 1
    No. Write the serial number in the space above for reference. Serial Number Decal CUSTOMER SERVICE UNITED KINGDOM Call: 0330 123 1045 From Ireland: 053 92 36102 Website: iconsupport.eu 2153 AUSTRALIA CAUTION Read all precautions and instructions in this manual before using this equipment. Save this
  • NordicTrack C 1650 | Instruction Manual - Page 2
    IDENTIFICATION CHART 6 ASSEMBLY 7 HOW TO USE THE TREADMILL 18 HOW TO FOLD AND MOVE THE TREADMILL 33 MAINTENANCE AND TROUBLESHOOTING 34 EXERCISE GUIDELINES 37 PART LIST 38 EXPLODED DRAWING 40 ORDERING REPLACEMENT PARTS Back Cover RECYCLING INFORMATION Back Cover WARNING DECAL PLACEMENT
  • NordicTrack C 1650 | Instruction Manual - Page 3
    all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no problems. 12. Wear appropriate exercise clothes while using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support
  • NordicTrack C 1650 | Instruction Manual - Page 4
    before clean- ing the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by
  • NordicTrack C 1650 | Instruction Manual - Page 5
    BEFORE YOU BEGIN Thank you for selecting the new NORDICTRACK® C 1650 treadmill. The C 1650 treadmill provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. manual. To help us assist you, note the product model number and serial number
  • NordicTrack C 1650 | Instruction Manual - Page 6
    assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether it is preattached. Extra
  • NordicTrack C 1650 | Instruction Manual - Page 7
    your computer and register your product. 1 • documents your ownership • activates your warranty • ensures priority customer support if assistance is ever needed  Note: If you do not have internet access, call Customer Service (see the front cover of this manual) and register your product. 7
  • NordicTrack C 1650 | Instruction Manual - Page 8
    2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (81) to the front of the Base (94). Next, identify the Right Upright (90). Have a second person hold the Right Upright near the Base (94). See the inset drawing. Tie the wire tie (A) in the Right Upright (90)
  • NordicTrack C 1650 | Instruction Manual - Page 9
    4. Hold the Right Upright (90) against the Base (94). Make sure not to pinch the Upright Wire 4 (81). Attach the Right Upright (90) and a Wheel (25) with two 3/8" x 2 1/4" Screws (7), a 3/8" x 1 1/4" Screw (63), a 3/8" x 1 3/4" Screw (62), and four 3/8" Star Washers (13) as shown; do not fully
  • NordicTrack C 1650 | Instruction Manual - Page 10
    6. Identify the left handrail assembly (E). Attach the left handrail assembly to the Left Upright 6 (89) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11); do not fully tighten the Screws yet. Then, remove and discard the indicated screw (F). 28 11 E F 7. Insert the
  • NordicTrack C 1650 | Instruction Manual - Page 11
    8. Tighten four #8 x 3/4" Screws (2) into the left and right handrail assemblies (E, G) and into the Left 8 and Right Uprights (89, 90). E 2 89 2 G 90 9. Set the Console Base (64) face down on a soft surface to avoid scratching the Console Base. If there are ties (H) securing the Pulse Crossbar
  • NordicTrack C 1650 | Instruction Manual - Page 12
    10. Identify the Right and Left Trays (27, 36). Attach the Trays (27, 36) to the Console Base (64) with eight #8 x 1/2" Screws (1); do not overtighten the Screws. Then, reattach the Console Frame (18) with the six #8 x 3/4" Screws (2) and the two Console Clamps (92) that you removed in step 9;
  • NordicTrack C 1650 | Instruction Manual - Page 13
    12. W ith the help of a second person, hold the console assembly (J) near the Handrails (86) (only one side is shown). Connect the ground wires (K) from the console assembly (J) to the Console Ground Wires (58) on the Pulse Crossbar (93). Next, insert the Upright Wire (81) through the two
  • NordicTrack C 1650 | Instruction Manual - Page 14
    14. Attach the Pulse Crossbar (93) to the console assembly (J) with four #8 x 1/2" Screws (1); start all four Screws, and then tighten them. Then, firmly tighten the four 5/16" x 3/4" Screws (4). 14 J 4 1 4 93 1 15. Carefully slide the Upright Crossbar (12) between the Left and Right Uprights (
  • NordicTrack C 1650 | Instruction Manual - Page 15
    Frame until step 19 is completed. Orient the Latch Crossbar (41) as shown. Make sure that the "This side toward belt" sticker (N) is facing the treadmill. Attach the Latch Crossbar to the brackets (O) on the Frame (56) with the two 5/16" x 3/4" Screws (4) that you just removed and two 5/16" Star
  • NordicTrack C 1650 | Instruction Manual - Page 16
    (3). Do not overtighten the Nut; the Storage Latch (53) must be able to pivot.  Then, lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 33). 19 34 Q 41 3 56 53 20. Firmly tighten the four 3/8" x 2 1/4" Screws (7) and the two 3/8" x 1 1/4" Screws (63). 20 Next, tighten
  • NordicTrack C 1650 | Instruction Manual - Page 17
    any other electronic device or object in the Tablet Holder. 98 Start First R 38 J 22. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the
  • NordicTrack C 1650 | Instruction Manual - Page 18
    IMPORTANT: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord. DANGER: Improper connection of Plug the indicated end of the power cord into the socket on the treadmill. Socket on Treadmill AUS Power Cord 2. Plug the power cord into an appropriate outlet
  • NordicTrack C 1650 | Instruction Manual - Page 19
    . When you use the manual mode, you can change the speed and incline of the treadmill with the touch of automatically controls the speed and incline of the treadmill as it guides you through an effective exercise session. In addition weight-loss workouts. Go to iFit.com to learn more. ETNE19716 19
  • NordicTrack C 1650 | Instruction Manual - Page 20
    treadmill frame near the power cord. Press the power switch into the reset position. Reset IMPORTANT: The console features a display demo mode, designed to be used if the treadmill see step 4 on page 28. For simplicity, all instructions in this section refer to kilometers. The console features a
  • NordicTrack C 1650 | Instruction Manual - Page 21
    3. Calibrate the incline system.  See step 4 on page 31 and calibrate the incline system of the treadmill. The following pages explain the various workouts and other features that the console offers. To use the manual mode, see page 22. To use an onboard workout, see page 24. To use a set-a-goal
  • NordicTrack C 1650 | Instruction Manual - Page 22
    the red boxes on the screen. As you walk or run on the treadmill, the screen can show the following workout information: • The incline level of the treadmill • The elapsed time • The time left (the manual mode does not have a time left countdown) • The approximate number of calories you
  • NordicTrack C 1650 | Instruction Manual - Page 23
    of the options on the screen. Then, remove the key from the console and put it in a secure place. When you are finished using the treadmill, press the power switch into the off position and unplug the power cord. IMPORTANT: If you do not do this, the
  • NordicTrack C 1650 | Instruction Manual - Page 24
    during the workout. The actual number of calories that you burn will depend on various factors such as your weight. In addition, if you manually change the speed or incline of the treadmill during the workout, the number of calories you burn will be affected. Each workout is divided into several
  • NordicTrack C 1650 | Instruction Manual - Page 25
    This is normal. The workout will function in the same way as the manual mode (see pages 22 and 23). The workout will continue until you actual number of calories that you burn will depend on various factors such as your weight. 5. Monitor your progress with the display. See step 5 on page 22.
  • NordicTrack C 1650 | Instruction Manual - Page 26
    HOW TO USE A PULSE WORKOUT Pulse workouts automatically control the speed and incline of the treadmill to keep your heart rate near a target level while you exercise. Note: You must wear a chest heart rate monitor to use a pulse workout. 1. Put on a
  • NordicTrack C 1650 | Instruction Manual - Page 27
    iFit workout in your schedule, touch the Map, Train, Video, or Lose Weight button to download the next workout of that type in your schedule. Note See step 3 on page 24. During some workouts, an audio coach may guide you through your workout. 6. Monitor your progress with the display. See step 5
  • NordicTrack C 1650 | Instruction Manual - Page 28
     The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the
  • NordicTrack C 1650 | Instruction Manual - Page 29
    passcode, designed to prevent unauthorized users from using the treadmill.  Touch the Passcode button. To enable a safety screen timeout. The console features an automatic screen reset; if no buttons are touched or pressed and the manual. Note: The console is compatible with all BLUETOOTH
  • NordicTrack C 1650 | Instruction Manual - Page 30
    If you have questions after following these instructions, go to support.iFit.com for assistance. HOW TO USE update. When the update is complete, the treadmill will turn off and then turn back on. seconds, and then press the power switch into the reset position. Note: It may take a few minutes for
  • NordicTrack C 1650 | Instruction Manual - Page 31
    available. Touch the Machine Info button to view information about your treadmill. After you view the information, touch the back button on the screen (hidden networks are not supported). 6. Find keycodes. The Keycodes button is intended to be used by service technicians to identify whether
  • NordicTrack C 1650 | Instruction Manual - Page 32
    problems connecting to an encrypted network, make sure that your password is correct. Note: Passwords are case-sensitive. Note: The iFit mode supports following these instructions, go to support.iFit.com to place the treadmill in the storage position (see HOW TO FOLD THE TREADMILL on page 33).
  • NordicTrack C 1650 | Instruction Manual - Page 33
    tipping it back, do not pull on the frame, and do not move the treadmill over an uneven surface. HOW TO LOWER THE TREADMILL FOR USE 1.  Push the upper end of the frame forward, and gently 1 press the upper part of the storage latch with your foot at the same time. 2.  While pressing
  • NordicTrack C 1650 | Instruction Manual - Page 34
    AND TROUBLESHOOTING MAINTENANCE SYMPTOM: The power turns off during use Regular maintenance is important for optimal performance and to reduce wear. Inspect and properly tighten all parts each time the treadmill is used. Replace any worn parts immediately. Regularly clean the treadmill and
  • NordicTrack C 1650 | Instruction Manual - Page 35
    a correct speed reading. c. Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform unless instructed to do so by an authorized service representative. Such substances may
  • NordicTrack C 1650 | Instruction Manual - Page 36
    ) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened. a SYMPTOM: The tablet holder does not stay in place a. Rotate the tablet holder
  • NordicTrack C 1650 | Instruction Manual - Page 37
    for persons over age 35 or persons with pre-existing health problems. The heart rate monitor is not a medical device. Various to achieving results. You can use your heart rate as a guide to find the proper intensity level. The chart below shows recommended enjoyable part of your everyday life. 37
  • NordicTrack C 1650 | Instruction Manual - Page 38
    PART LIST Key No. Qty. 1 18 2 43 3 1 4 10 5 2 6 1 7 4 8 1 9 2 10 8 11 14 12 1 Screw Isolator Rear Foot Latch Crossbar Left Foot Rail Caution Decal Walking Platform Walking Belt Belt Guide Right Rear Foot Cable Tie Drive Roller/Pulley 1/4" x 1 1/4" Screw Model No. NETL19716
  • NordicTrack C 1650 | Instruction Manual - Page 39
    Motor Bushing 106 1 107 3 108 3 109 1 * - Filter #8 x 1/2" Machine Screw #8 Nut Motor Isolator User's Manual Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated. 39
  • NordicTrack C 1650 | Instruction Manual - Page 40
    40 104 103 14 23 50 1 42 59 21 102 51 10 39 30 34 1 35 39 46 19 37 49 35 35 1 11 4 37 60 39 44 43 35 35 45 35 37 23 35 61 15 59 30 34 40 15 57 2 2 2 23 35 37 11 56 1 4 1 39 37 39 59 30 35 35 53 40 34 47 34 3 55 2 2 105 20 108 107 10 24 84 73
  • NordicTrack C 1650 | Instruction Manual - Page 41
    EXPLODED DRAWING B Model No. NETL19716.3 R1017A 2 2 2 65 66 67 52 101 29 33 69 33 71 70 16 32 33 101 52 33 67 2 68 2 2 2 71 72 68 76 68 74 75 68 78 68 2 2 2 41
  • NordicTrack C 1650 | Instruction Manual - Page 42
    EXPLODED DRAWING C Model No. NETL19716.3 R1017A 14 28 87 11 86 11 68 79 4 9 5 93 2 2 11 4 89 1 12 82 17 7 63 13 13 22 52 99 91 25 33 14 88 2 14 2 95 14 14 96 58 10 1 1 4 11 2 85 5 11 1 86 68 9 28 14 11 4 81 4 2 11 25 13 62 97 2 81 90 52 22 62 13 77 25 7 13 94 91
  • NordicTrack C 1650 | Instruction Manual - Page 43
    EXPLODED DRAWING D Model No. NETL19716.3 R1017A 1 98 36 64 2 38 2 1 26 1 2 2 2 80 2 27 1 1 18 2 92 2 2 92 8 31 2 43
  • NordicTrack C 1650 | Instruction Manual - Page 44
    ) • the name of the product (see the front cover of this manual) • the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual) RECYCLING INFORMATION This electronic product must not be disposed of in municipal waste. To preserve
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Model No. NETL19716.3
Serial No.
Write the serial number in the space
above for reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial
Number
Decal
USER'S MANUAL
iconeurope.com
CUSTOMER SERVICE
UNITED KINGDOM
Call:
0330 123 1045
From Ireland:
053 92 36102
Website:
iconsupport.eu
E-mail:
Write:
ICON Health & Fitness, Ltd.
Unit 4, Westgate Court
Silkwood Park
OSSETT
WF5 9TT
UNITED KINGDOM
AUSTRALIA
Call:
1800 993 770
E-mail:
Write:
ICON Health & Fitness
PO Box 635
WINSTON HILLS NSW 2153
AUSTRALIA