Oki C9600hnColorSignage Guide: User's, C9600

Oki C9600hnColorSignage Manual

Oki C9600hnColorSignage manual content summary:

  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 1
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 2
    Oki Data. All Rights Reserved Document Information C9600 User's Guide drivers and manuals are available from the web site: http://www.okiprintingsolutions.com Trademark Information Oki and Oki Printing Solutions are registered trademarks of Oki or trademarks of Microsoft Corporation in the United
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 3
    CONTENTS Notes, cautions and warnings 6 Safety warnings 6 Introduction 12 Features 12 About this guide 14 Online usage 15 Printing pages 15 Printer and paper overview 17 Opening and closing the top cover 17 Identifying major components 18 Software supplied 22 Paper recommendations 23
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 4
    network interface 46 Using the Drivers CD 47 Operation 48 Using the printer 48 Consumables and maintenance 49 accessories 60 Accessory order information 61 Installing accessories 62 Troubleshooting 63 Paper jams - printer 63 Open cover, paper jam, tttttt side cover 102 C9600 User's Guide> 4
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 5
    Secure Job 113 Menus 113 Tray Configuration 113 System Adjust 118 Menus example 1 - Tray 1 transparencies . . . .121 Menus example 2 - MP Tray paper size . . . . . .121 Oki service centers 123 Authorized Service Providers 123 Oki Data Contact Locations 123 Index 124 C9600 User's Guide> 5
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 6
    result in a risk of personal injury. SAFETY WARNINGS Please be careful to read and understand the safety warnings on the following pages before operating the printer. C9600 User's Guide> 6
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 7
    WARNING! Ensure all warning and instruction labels on the product are read, understood and followed in order to prevent any risk of injury. Ensure this and all other documentation is both read carefully and retained for future reference. This printer unit weighs 72kg. 3 people are required to lift
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 8
    as this can cause overheating which may lead to fire or electric shock. Ensure the power socket to which the printer is connected is easily accessible at all times. Do not connect or disconnect the power plug with a wet can cause fraying and may lead to fire or electric shock. C9600 User's Guide> 8
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 9
    cord or any other cables only as directed in the User's Guide, this may result in a fire. Ensure loose clothing and hair are kept clear of moving parts when printer is in operation to prevent possible risk of injury. When the printer cover is open, do not touch the fuser unit as you
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 10
    parts that may cause a fire. Switch printer off before cleaning to prevent any risk of injury. Clean using a damp cloth. Do not use liquid or aerosol cleaners. Do not carry out any operations on the printer that are not specified in the User's Guide. This may result in electric shock, fire
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 11
    . Do not touch the battery. Printer battery should not require replacement during the life of the printer. After installing additional memory or a hard disk drive, the cover door must be closed and secured to prevent risk of fire. Take care with toner
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 12
    INTRODUCTION Congratulations on buying an Oki color printer. Your new printer is designed with advanced features to give you clear, vibrant color prints and crisp black and white network > USB 2.0 and parallel (IEEE-1284) interfaces > PCL, PS, IBM PPR, Epson FX emulations C9600 User's Guide> 12
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 13
    has a High Capacity Feeder installed and so can only accommodate one additional tray (to give the maximum total of five). > Additional memory > Finisher (for stapling printer output) > Punch unit (to extend Finisher functionality) > Wireless LAN networking capability C9600 User
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 14
    may include optional features that your printer does not have installed. This manual is your user's guide (check the web site, my.okidata.com, for the most up-to-date version) for your printer and forms part of the overall user support listed below: > Set-up guide: to describe how to unpack, connect
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 15
    ONLINE USAGE This guide is intended to be read on screen using an Adobe Acrobat and click on the associated page number to jump to the page containing the term. PRINTING PAGES The whole manual, individual pages, or sections may be printed. The procedure is: 1. From the toolbar, select [File], then
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 16
    (c) [Pages from] and [to], (3), for the range of pages you specify by entering their page numbers. 3. Click on [OK]. C9600 User's Guide> 16
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 17
    PRINTER AND PAPER OVERVIEW OPENING AND CLOSING THE TOP COVER To open the top cover, squeeze the top cover handle (1) to release the catch (1) until the cover stops midway and then push harder (2) to close the cover completely. Ensure that the cover is securely closed. 1 2 C9600 User's Guide> 17
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 18
    of your printer are identified in the graphics below. 1. Paper holding arm 2. Top cover (face-down stacker) 3. MP Tray (multi-purpose tray) 4. Tray 1 side cover 5. Paper size label 6. Paper gauge 7. Tray 1 (paper tray) 8. Control panel 9. Top cover handle 1 2 3 9 8 7 6 4 5 C9600 User's Guide> 18
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 19
    10. Face-down stacker 11. Power (on/off) switch 12. Face-up stacker 10 12 11 C9600 User's Guide> 19
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 20
    13. Interface unit 14. Network interface connector 15. Parallel interface connector 16. USB interface connector 17. Power connector 18. Ventilation openings 14 15 18 13 16 17 C9600 User's Guide> 20
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 21
    (Cyan) 20. Image drum cartridge and toner cartridge (Magenta) 21. Image drum cartridge and toner cartridge (Yellow) 22. Image drum cartridge and toner cartridge (Black) 23. Toner cartridge 24. Image drum cartridge 25. Fuser unit 26. LED heads 26 25 19 20 21 22 23 24 C9600 User's Guide> 21
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 22
    basket handle 29. Drum basket 29 28 27 SOFTWARE SUPPLIED CDs: > Drivers Contains drivers, utilities and network software. > Documentation Contains documentation in electronic form to describe how to use the printer for day-to-day tasks. > Monaco software Contains color profile software (documented
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 23
    printer 90 g/m²) paper designed for use in copiers and laser printers. Suitable types are: > OKI® Bright White, 32 lb US Bond > HammerMill® printer. Window envelopes are not suitable. Transparencies use in copiers and laser printers. In particular, avoid office and laser printers, in which the base carrier page is
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 24
    MP Tray Face-up Stacker MP Tray Face-up Stacker Based on 24 lb paper 0.004 - 0.008 in MP Tray Face-up Stacker C9600 User's Guide> 24
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 25
    printer automatically switch to that other tray when the current tray runs out of paper. This function can be enabled by driver ensures that the paper path through the printer is almost straight. The multi-purpose tray printer. Do not use the duplex (two-sided printing) function for
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 26
    The face-down stacker on the top of the printer can hold up to 500 sheets of 20 lb required for use. (With the face-up stacker either open or closed, the driver setting of Face Down will successfully direct prints to the Face-Down stacker.) range 20 - 32 lb (75 - 120 g/m²). C9600 User's Guide> 26
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 27
    required paper size. 1 3. Fan the paper to be loaded then tap the edges of the stack on a flat surface to make it flush. C9600 User's Guide> 27
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 28
    top edge towards the right for letterhead paper), press the tab (2) on the paper guide and adjust the guides (3) for a snug fit to the paper. To avoid paper jams: • Do not leave space between the paper and the guides and rear stopper. • Do not overfill the paper tray. Capacity depends on the paper
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 29
    5. Gently push the tray back into the printer. USING THE MP TRAY 1. Squeeze the handle (1) and open the multi-purpose tray. 1 C9600 User's Guide> 29
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 30
    section and swivel out the extension supports (2). 3 2 3. Adjust the paper guides (3) to the size of the paper being used. 4. the multi-purpose tray with pre-printed side up and top edge into the printer. • For two-sided (duplex) printing on letterhead, load the paper with pre-printed side down and
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 31
    be installed for this function.) • Envelopes should be loaded face-up with long edge into the printer. Do not select duplex printing on envelopes. • Do not leave space between the paper and the guides. • Do not exceed the paper capacity of approximately 230 sheets, 100 transparencies or 25 envelopes
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 32
    USING THE STACKERS Face-down stacker When the face-up stacker (1) on the left side of the printer is closed (its normal position), paper is ejected to the face-down stacker on the top of the printer. 1 Face-up stacker The face-up exit path is used for heavy paper (cardstock etc.), envelopes
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 33
    2. Flip out the paper support (2). 2 3. Swivel out the paper support extension (3). 3 C9600 User's Guide> 33
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 34
    for more than 2 seconds for a soft shutdown. You can then press this button again for a restart or use the Power switch to turn off the printer completely. C9600 User's Guide> 34
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 35
    ready to print Flashing: indicates processing print data Off: indicates unable to receive data (offline) 3. Attention light Off: indicates 9. Online button Switches between online (printer ready to receive data) and offline (printer not ready to receive data) 10. Cancel button Cancels current print
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 36
    problem and cannot continue printing until the user has intervened and removed the cause of the trouble. The top two lines of the display panel show the printer status. The bottom of the display panel normally shows a bar chart of the toner the printer power supply (including C9600 User's Guide> 36
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 37
    support staff to allow printer configurations and special functions to be set. CONFIGURATION INFORMATION Configuration information displays printer are used to move through the printer menus. You can adjust settings printer drivers. However, several of the driver settings can be left at "Printer
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 38
    involved in using the menus are typically as follows: 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter User menu mode by pressing either the Enter button or the and "Appendix B - Menu system" on page 104 for examples of using the menus. C9600 User's Guide> 38
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 39
    GETTING STARTED This section provides information to help you get started with using your printer. PRINTER LOCATION Check that you have sufficient space for access: > around your printer: 20cm 8in 60cm 24in 60cm 24in 100cm 40in C9600 User's Guide> 39
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 40
    > above your printer: 70cm 28in TURNING OFF/ON TURNING OFF No hard disk drive installed 1. If a hard disk drive is NOT installed, use the On/Off switch. C9600 User's Guide> 40
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 41
    control panel for more than 2 seconds to start the shutdown process. 1 2. When the display panel shows that you can either turn off or restart the printer, use the On/Off switch to turn off the printer. C9600 User's Guide> 41
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 42
    shown on the display panel and used for reports: 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter menu mode by pressing either the Up-arrow or Down-arrow button the Up-arrow or Down-arrow buttons repeatedly until Language is highlighted. C9600 User's Guide> 42
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 43
    report (Menu Map) to confirm that your printer is correctly configured. 1. Ensure that there is 2. Ensure that the display panel indicates that the printer is ready to print. 3. Press the Up-arrow printer returns to the ready to print status. 9. You can use this document to check your printer
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 44
    AND CONNECTION Your printer is equipped with a selection of data interfaces: > USB version 2.0 or above. The printer may not work if a USB- compatible device is printers of the same type, they appear as 2), ***** (3), etc. These numbers depend on the order of connecting or turning on each printer
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 45
    . CONNECTING THE USB INTERFACE Do not connect the USB cable at this time. You will be instructed when to connect the USB cable when you run the Drivers CD. If you are connecting your printer directly to a stand alone computer proceed to the section entitled "Printer Drivers". C9600 User's Guide> 45
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 46
    CONNECTING THE NETWORK INTERFACE 1. Turn off the printer and the computer. 2. Remove the protective cover from the network connector on the printer. 3. Connect an Ethernet cable between the printer and an Ethernet hub. C9600 User's Guide> 46
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 47
    Installation Guide and Configuration Guide for further details on how to configure the network connection before installing the printer drivers. NOTE Administrator's authority is required when installing a network connection. USING THE DRIVERS CD For instructions on installing the drivers and
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 48
    OPERATION USING THE PRINTER For full details of how to use the printer and any optional accessories to print jobs efficiently and effectively, please refer to the Printing Guide. C9600 User's Guide> 48
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 49
    This section explains how to replace consumable and maintenance items when due. As a guide, the life expectancy of these items is: > Toner - 15,000 Letter pages at 5% coverage. The printer is shipped with sufficient toner for 7,500 Letter pages in the print cartridges of which 1 - 2,000 Letter pages
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 50
    CONSUMABLE ITEM ORDER INFORMATION ITEM Toner, Black Toner, Cyan Toner, Magenta Toner, Yellow Image drum, Black Image drum, Cyan Image drum, ORDER DETAILS ITEM Fuser unit LIFE 100,000 Letter pages Belt unit Waste toner bottle 100,000 Letter pages 30,000 Letter pages avg ORDER NUMBER 42918904
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 51
    replacement. You are advised to follow these instructions carefully. CAUTION! Only use genuine Oki Original consumables to ensure the best quality and performance from your hardware. Non-Oki Original products may damage your printer's performance and invalidate your warranty. Specifications subject
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 52
    2. With an LED lens cleaner or soft cloth, gently wipe each of the four heads (1). Move the cleaner as shown, using a clean section of the cleaner with each pass. Be careful not to damage the guards (2). 1 2 3. Close the top cover. C9600 User's Guide> 52
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 53
    Clean the paper feed rollers if paper jams frequently occur. 1. Remove items like a wrist watch or bracelet and follow the correct steps to turn the printer off depending on whether a hard disk drive is installed. 2. Open Tray 1 side cover and pull out the paper guide plate (1). 1 C9600 User
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 54
    3. Remove Tray 1 completely from the printer. 4. Gaining access through the gap left by Tray 1, wipe the 3 paper feed rollers (2) with a soft cloth lightly moistened with water. 2 5. Replace Tray 1. C9600 User's Guide> 54
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 55
    6. Return the paper guide plate to its original position and close Tray 1 side cover. 7. Turn on the printer. C9600 User's Guide> 55
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 56
    THE PRINTER CASING 1. Follow the correct steps to turn the printer off depending on whether a hard disk drive is installed. 2. Wipe the printer surface with a soft cloth moistened sparingly with water or neutral detergent. 3. Use a soft dry cloth to dry the printer surface. C9600 User's Guide> 56
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 57
    4. Turn on the printer. EMPTYING THE PUNCH CHIP BOX (PUNCH UNIT OPTIONAL ACCESSORY) When the display panel indicates that the punch chip box is full, empty the box as follows: 1. Operate the Finisher lever and move the Finisher away from the printer. C9600 User's Guide> 57
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 58
    2. Pull out the punch chip box, being careful to keep it level so as not to spill any chips. 3. Discard the chips in an appropriate place. 4. Replace the punch chip box carefully into the Finisher. C9600 User's Guide> 58
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 59
    5. Check that the punch chip box has been replaced correctly then move the Finisher back into position, being careful not to trap your fingers. C9600 User's Guide> 59
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 60
    OPTIONAL ACCESSORIES This section describes optional accessory equipment for your printer. The following accessories are available: > duplex unit (to enable two- > Wireless LAN networking capability > Finisher (for stapling printer output) > Punch unit (to extend Finisher functionality) C9600 User
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 61
    ) Wireless LAN card Finisher: 4-tray 5-tray Finisher Punch Unit: 2-3 hole ORDER NUMBER 42797201 70050201 70050301 70050401 70050501 42831301 42831501 70050101 42940201 42872701 42872902 C9600 User's Guide> 61
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 62
    its own documentation which gives full instructions on installation. You are advised to follow these instructions carefully. After installation, print out setting in your printer driver(s): > duplex unit > paper tray(s) > Finisher Refer to the Printing Guide for driver setting details. C9600 User
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 63
    TROUBLESHOOTING This section provides information to help you deal with problems that may arise when using the printer. The following paragraphs describe actions to take in the event of a paper jam and trays. 1. Squeeze the catch (1) on Tray 1 side cover and open the cover. C9600 User's Guide> 63
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 64
    2. Holding it by the tab (2), turn the paper guide outward. 2 3. Carefully remove the jammed paper. 4. Put the paper guide back into position and close Tray 1 side cover. C9600 User's Guide> 64
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 65
    OPEN COVER, PAPER JAM, SIDE COVER 1. If the MP Tray is open, close it so that the side cover (1) is visible. 1 2. Pull the release lever (2) and pull open the side cover. 2 C9600 User's Guide> 65
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 66
    3. Carefully remove the jammed paper. 4. Close the side cover. C9600 User's Guide> 66
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 67
    OPEN COVER, PAPER JAM, TOP COVER 1. Squeeze the top cover handle (1) and open the top cover. 1 WARNING! Be careful not to touch the fuser unit which is hot after printing. 2. Squeeze the basket handle (2) and raise the drum basket. 2 C9600 User's Guide> 67
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 68
    is hot, wait until it cools before attempting to remove any jammed paper. Holding the fuser unit (4) by the handle, lift it out of the printer and place it on a flat surface. 4 3 C9600 User
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 69
    5. Pull up the jam release levers (5) and remove the jammed paper. 5 6. Carefully replace the fuser unit into the printer and turn the lock lever (6) in the direction shown to lock the fuser unit. 6 C9600 User's Guide> 69
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 70
    7. If paper is jammed near the paper exit, open the face-up stacker (7). 7 8. Open the side cover (paper exit) (8) and remove the jammed paper. 8 C9600 User's Guide> 70
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 71
    9. Close the side cover (paper exit) and then the face-up stacker. 10. Return the image drum basket (9) into position and check it is locked. 9 C9600 User's Guide> 71
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 72
    11. Close the top cover and ensure it is latched. PAPER JAMS - DUPLEX UNIT (IF INSTALLED) CHECK DUPLEX UNIT, PAPER JAM 1. If a Finisher unit is attached to your printer, operate the lever (1) of the Inverter unit to separate the Inverter from the printer. 1 C9600 User's Guide> 72
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 73
    2. Operate the duplex cover release button (2) and open the cover. 2 3. Carefully remove any jammed paper. C9600 User's Guide> 73
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 74
    4. Operate the levers (3) and pull out the duplex unit. 3 3 5. Holding the front top cover by the grip (4), push it gently inwards and raise it. 4 C9600 User's Guide> 74
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 75
    6. Remove any jammed paper. 7. In similar manner, check for and clear any paper jammed under the rear top cover. C9600 User's Guide> 75
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 76
    8. Replace the two top covers. 9. Raise the front cover of the duplex unit. C9600 User's Guide> 76
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 77
    10. Push the duplex unit back into position. 11. If you detached a Finisher unit to gain access to the duplex unit, replace the Finisher unit. C9600 User's Guide> 77
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 78
    FINISHER (OPTIONAL ACCESSORY) CHECK FINISHER, PAPER JAM/PAPER REMAINS Use the Help button on the printer control panel to check the number displayed. You will need this to be able to clear the 643, 645 (PAPER JAM AROUND FINISHER) 1. Remove any paper at the Finisher paper exit. C9600 User's Guide> 78
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 79
    2. Operate the Finisher lever (1) and move the Finisher away from the Inverter. 1 3. Open the Finisher top cover. C9600 User's Guide> 79
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 80
    4. Carefully remove any jammed paper. 5. Close the Finisher top cover. 6. Move the Finisher back into position and connect it to the Inverter. C9600 User's Guide> 80
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 81
    594, 597, 598/ 644, 646 (PAPER JAM IN FINISHER) 1. Operate the Finisher lever (1) and move the Finisher away from the Inverter. 1 2. Open the Finisher front cover (2). 2 C9600 User's Guide> 81
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 82
    3. Continue to turn the lower knob (3) clockwise until any jammed paper is completely ejected. 3 4. Remove the ejected paper. 5. Close the Finisher front cover. C9600 User's Guide> 82
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 83
    6. Open the Finisher right side cover. 7. Carefully remove any jammed paper. 8. Close the Finisher right side cover. C9600 User's Guide> 83
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 84
    9. Move the Finisher back into position and connect it to the Inverter. 590 (PAPER JAM IN FINISHER/PUNCH UNIT) 1. Operate the Finisher lever (1) and move the Finisher away from the Inverter. 1 C9600 User's Guide> 84
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 85
    2. Move the tab (2) on the right side of the Finisher to align it with the mark (3). 3 2 3. Open the Finisher top cover. C9600 User's Guide> 85
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 86
    4. Carefully remove any jammed paper. 5. Close the Finisher top cover. 6. Move the Finisher back into position and connect it to the Inverter. C9600 User's Guide> 86
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 87
    CHECK INVERTER, PAPER JAM 1. Operate the Finisher lever (1) and move the Finisher away from the Inverter. 1 2. Squeeze the recessed handle (2) and open the left side cover of the Inverter. 2 C9600 User's Guide> 87
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 88
    3. Carefully remove any jammed paper. 4. Close the Inverter left side cover. 5. Move the Finisher back into position and connect it to the Inverter. C9600 User's Guide> 88
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 89
    6. Operate the Inverter lever (3) and separate the Inverter from the printer. 3 7. Open the right side door (4) of the Inverter. 4 C9600 User's Guide> 89
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 90
    8. Remove any jammed paper. 9. Close the right side door. C9600 User's Guide> 90
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 91
    jams and suggests ways of avoiding them. POSSIBLE CAUSE SUGGESTED REMEDY The printer is not level. Your print media is too light or too heavy. alignment and reload them. Adjust the paper stop and paper guides of the tray, or the manual feed guide on the MP Tray to align the media properly. Adjust
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 92
    film of the image drum cartridge is dirty. The LED head is dirty. The toner is low. The paper is not suitable for the printer. Wipe the LED head with a LED lens cleaner or with a soft cloth. Replace the toner cartridge. Replace the image drum cartridge. Wipe the film with a LED lens cleaner
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 93
    toner cartridge is not properly seated. The toner is low. The paper is moist. The paper is not suitable for the printer . Thickness and type of paper are inappropriate. Recycled paper is being used. Paper is moist or dry. Reinstall the toner cartridge. Replace the toner The toner is toner
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 94
    are incorrectly set. Use paper stored in proper temperature and humidity conditions. Use thinner paper. Replace the toner cartridge. Wipe the head with LED lens cleaner or with a soft cloth. Set the correct value of the jam as follows: 1. Open the Finisher front cover. C9600 User's Guide> 94
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 95
    2. Turn the knob in the direction indicated until the colored indicator appears. 3. Remove any paper that awaits stapling in the paper ejection area. C9600 User's Guide> 95
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 96
    4. Pull out the staple unit. 5. Turn the knob in the direction indicated to move the stapler to the front. C9600 User's Guide> 96
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 97
    6. Grip both sides of the staple cartridge, pull it up and remove it. 7. Raise the staple cartridge gate. 8. Remove all staples that are emerging from the staple case. C9600 User's Guide> 97
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 98
    9. Return the staple cartridge gate to its original position. 10. Replace the staple cartridge. 11. Ensure that the staple cartridge is securely installed back into the staple unit then push the staple unit fully home. C9600 User's Guide> 98
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 99
    12. Close the Finisher front cover, being careful not to trap your fingers. C9600 User's Guide> 99
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 100
    lb (75 g/m²) Paper weight Paper output Interfaces Duty cycle Toner life Image drum life Belt life Fuser life Waste toner bottle life Power rating Power consumption SPECIFICATION 25.8x24.4x18.2 maximum, 750 W typical Standby: 1,300 W maximum, 200 W typical Power save:
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 101
    ITEM Operating environment Noise level SPECIFICATION Operating: 50 - 90°F/20 - 80%RH Off: 32 - 110°F/10 - 90%RH Operating: 53dBA maximum Standby: 40dBA maximum Power save: 40dBA maximum after 30 mins background level C9600 User's Guide> 101
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 102
    Toner Low Fuser Unit Near Life Change Fuser Unit Inverter is Removed Invalid Data printer is online and ready to print. Your printer printer and all Finisher functions are disabled. (Finisher/Inverter is an optional accessory.) Invalid data has been received by the printer printer The printer has
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 103
    HELP button. Check that the image drum of color cccccc is correctly installed. You can access help details by pressing the HELP button. C9600 User's Guide> 103
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 104
    above are intended for more specialized usage and are not described further here. For full details of using all menus to configure and use the printer, refer to the Configuration Guide. C9600 User's Guide> 104
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 105
    5. Displays total printed pages from MP tray. DESCRIPTION Displays total pages stapled. Displays total pages punched. Displays total pages ejected into the Finisher. C9600 User's Guide> 105
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 106
    VALUE Remaining nnn% Belt Remaining nnn% Fuser Remaining nnn% xxxx Toner (n.nK) Remaining nnn% DESCRIPTION Displays the remaining life span of a percentage. Displays the remaining life span of xxxx toner as a percentage, where xxxx can be Cyan, Magenta, Yellow, Black. (n.nK) indicates the
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 107
    100/10 Base Slot2: Wireless (displayed only when Wireless LAN Card installed) Printer Name Short Printer Name IP Address Subnet Mask Gateway Address MAC Address Network FW Version Web . Displays SSID. ****** Open Shared key WPA-PSK EAP Displays authentication type. C9600 User's Guide> 107
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 108
    Wireless FW Version Wireless ID Version xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx Displays printer name (DNS or PnP) in wireless network. xxxxxxxxxxxxxxx Displays printer name (NetBEUI) in wireless network. xxx.xxx.xxx xxxxxxxx.xx.xxx xxxxx Displays the wireless hardware version. C9600 User's Guide> 108
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 109
    size of Traym. Displays detected paper size of the MP Tray. DESCRIPTION Displays serial no. of the printer. Displays Asset Number. Asset Number is 8 alphanumeric characters that can be assigned by a user. Same as of PU (Print Unit) firmware. Same as PU version of Menu Map. C9600 User's Guide> 109
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 110
    far (remembering that a duplex page counts as two pages): 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter menu mode by pressing either the Up-arrow or Down-arrow button and to exit menu mode and return to the ready to print status. C9600 User's Guide> 110
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 111
    Execute Print Execute Information Print Summary Execute Print Execute Information Execute Prints printer configuration details. Prints summary information about the wired network. Prints full all of Job Log. Prints the error log. Prints a color profile list. C9600 User's Guide> 111
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 112
    EXAMPLE - DEMONSTRATION PAGE To print a printer demo page to demonstrate how your printer prints: 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter menu and the demo page is printed. 8. After printing, the printer returns to ready to print status. C9600 User
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 113
    the HDD. When you print a document Stored to HDD, it prints and remains stored on the HDD until you manually delete it. Not Found: (no jobs) is indicated when there is no output file. The following messages are /automatic tray switch. Specifies units for custom paper size. C9600 User's Guide> 113
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 114
    same direction as paper movement. Sets the media type for Traym. User Type1 to User Type5 are reserved for custom paper sizes set in the printer driver. Sets media weight for Traym. The printer detects A3 Nobi, A3 Wide and Tabloid Extra sizes as the same. Use this setting to tell the
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 115
    Sets the length of the legal paper in Traym. Change this to Legal 13.5 if that is the standard legal size in your country. The printer detects A5, A6 and Postcard sizes as the same. Use this setting to tell the
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 116
    direction perpendicular to the direction of paper movement. Sets Custom paper length for MP Tray. Sets for the same direction as paper movement. C9600 User's Guide> 116
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 117
    . Tray selection/switching uses this tray as the normal tray. If a paper size or type in a tray is not matched to that of the print data, use paper from this tray instead of the specified tray. Makes the MP tray unavailable in auto tray selection/switching. C9600 User
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 118
    a new print job is received. Sets whether the printer is automatically recovered when Memory Overflow or Tray Request occurs. If paper is not fed within this time in manual feed, the job is cancelled. Sets the time period between stopping receipt of job data and forced print. For PS, printing is not
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 119
    DESCRIPTION Sets the printing operation when insufficient toner is detected. Continue: the printer can continue printing while remaining online. Stop: the printer stops printing and goes offline. ON: continues the language to be used in the display panel and local printing. C9600 User's Guide> 119
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 120
    movement (i.e. vertically). Set to produce idling of a drum before printing in order to reduce horizontal white lines. This shortens image drum life. Prints out the data received from the host PC in hexadecimal code. C9600 User
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 121
    accommodated in Tray1): 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter menu mode by pressing either the size in the MP Tray: 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter menu mode by pressing either the Up-arrow or
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 122
    asterisk (*) appears beside the chosen size. 13. Press the Online button to exit menu mode and return to the ready to print status. C9600 User's Guide> 122
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 123
    comprehensive, up-to-date listing of Oki Data authorized Service Centers: Consult our web site at www.okidata.com In the U.S. and Canada, call 1 800 654 3282 (1 800 OKI-DATA) In Latin America, contact the Latin America Service Coordinator at Oki Data's Corporate Headquarters at 856-222-5276 / 856
  • Oki C9600hnColorSignage | Guide: User's, C9600 - Page 124
    63 top cover 67 printer components 18 location 39 specifications 100 printing 48 punch chip box emptying 57 R recommended media 23 S shutdown/restart button 34 software 22 specifications 100 T troubleshooting 63 turning off 40 on 42 U unsatisfactory printing 92 user's guide printing 15 C9600 User
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124