Oki C9600hnColorSignage Changing the Inverter Unit for use with the 4-Tray Fin
Oki C9600hnColorSignage Manual
View all Oki C9600hnColorSignage manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki C9600hnColorSignage manual content summary:
- Oki C9600hnColorSignage | Changing the Inverter Unit for use with the 4-Tray Fin - Page 1
finisher option. If you have the 4-tray version of the finisher option, you must change the inverter unit before installing the finisher: X Inverter as supplied Y Inverter changed for use with 4-tray finisher. 1. Remove the two bottom caps: a. Turn the inverter over, then remove the screws securing - Oki C9600hnColorSignage | Changing the Inverter Unit for use with the 4-Tray Fin - Page 2
inverter and push back to engage the pins on the bottom channel stops. 7. You are now ready to install the 4-tray finisher. See the Finisher Unit Installation Guide: 5. Reattach the extension plate using the screws you removed earlier. © 2005 Oki Data Americas, Inc. 58374301
Read Me First!
Changing the Inverter Unit
for use with the 4-Tray Finisher
The inverter unit comes configured for the 5-tray
finisher option.
If you have the 4-tray version of the finisher
option, you must change the inverter unit before
installing the finisher:
Inverter as supplied
Inverter changed for use with 4-tray finisher.
Orientation:
Front
Back
1. Remove the two bottom caps:
a.Turn the inverter over,
then remove the
screws securing the bottom caps on either
side of the inverter.
b. Remove the end caps and store them
along with the four screws in case you
ever need to convert the unit back.
2. Turn the inverter around and remove the
screws holding the metal brackets in place.
Keep the screws and brackets handy: they
are used to help secure the extension plate
once it is repositioned.