Oki CX3535MFP 58409501 Yellow Developer

1 – English

Material Safety Data Sheet

# 58409501

Yellow Developer, Type D2, P/N 44957901

For more information, contact Oki Data at: 2000

Bishops Gate Boulevard, Mount Laurel, NJ 08054-

4620.

Emergency Information

: call 1-800-654-3282; US and

Canada only.

COMPOSITION/INFORMATION ON

INGREDIENTS

INGREDIENT(S)

CAS No.

wt.%

Ceramic materials and

66402-68-4

>90

wares, chemicals

Polyester resin

---

<10

Organic Pigment

---

<1

Amorphous Silica

7631-86-9

<1

---

TRADE SECRET

HAZARDS IDENTIFICATION

Emergency Overview:

If used as intended, the product does

not present acute or chronic health hazard.

Physical Hazards:

This product is not classified as

flammable or combustible. It will burn in case of fire. Avoid

contact with strong oxidizers such as chromate, bromate and

nitrates.

Routes of Exposure:

Inhalation, dermal contact, incidental

ingestion

Inhalation:

Excessive inhalation may cause irritation of the

nose, throat and respiratory tract.

Eye Contact:

Non-irritant.

Dermal Contact:

Non-irritant, non-sensitiser.

Ingestion:

Not currently known.

Chronic Effects:

See Section 11 Supplemental Health

Information.

Carcinogenicity:

See Section 11 Supplemental Health

Information.

Reproductive/Developmental:

Not identified.

Target Organs:

Prolonged breathing of high concentrations

may cause adverse effects on the respiratory system.

Signs and Symptoms of Exposure:

Prolonged exposure to

dusts of this product may irritate the respiratory system.

Medical Conditions Aggravated by Exposure to This

Product:

Respiratory disorders, such as asthma, may be

aggravated by prolonged exposure to high concentrations of

this product.

FIRST AID MEASURES

Eye Contact:

Immediately flush eyes with plenty of water for

at least 15 minutes. If irritation persists, call a physician.

Skin Contact:

Wash with soap and water. Wash clothing

before reuse. If irritation occurs or is persistent, seek medical

attention.

Ingestion:

Dilute stomach contents with several glasses of

water.

Inhalation:

Remove from exposure area to fresh air

immediately. Contact a physician if there is any difficulty in

breathing or other signs of distress.

FIRE FIGHTING MEASURES

General Hazard:

Product will burn in case of fire.

Flash Point:

Not applicable

Flammable Limits:

Not applicable

Autoignition Temperature:

Not applicable

Flammability classification:

Not applicable

Extinguishing Media:

Foam, halon, carbon dioxide, dry

chemical & water fog.

Unusual Fire & Explosion Hazard:

Combustible powder.

Dust of this product at sufficient concentrations can form

explosive mixtures with air.

Fire Fighting Procedures:

None

Hazardous Combustion Products:

Carbon monoxide,

carbon dioxide and smoke.

ACCIDENTAL RELEASE MEASURES

Spills or Leaks:

Vacuum-clean spilled toner and carefully

transfer into sealable waste container. If no vacuum-cleaner

is available, sweep slowly to minimize generation of dust

during clean-up. Residue can be removed with soap and cold

water.

HANDLING AND STORAGE

Handling:

Avoid dust, keep away from ignition sources.

Prevention of Fire and Explosion: This material is capable of

creating a dust explosion. Keep away from heat, sparks &

flame.

Storage:

Keep container in cool and dry area.

Hygienic Practices:

Avoid inhalation and ingestion. Avoid

getting in eyes, on skin or clothing. Wash hands thoroughly

after handling, and before eating, drinking, or smoking.

EXPOSURE CONTROLS/PERSONAL

PROTECTION

Exposure Limits

OSHA PELs (TWA)

as the product:

15mg/m3 (Total dust) 5mg/m3 (Respirable

fraction)

Other substances:

Not listed

ACGIH TLVs (TWA)

as the product:

10mg/m3 (Total dust) 3mg/m3 (Respirable

fraction)

Other substances:

Not listed

DFG-MAK (TWA)

as the product:

4mg/m3 (Inhalable fraction) 1.5mg/m3

(Respirable fraction)

All substances:

Not listed

NOHSC (TWA)

All substances:

Not listed

Engineering Controls:

Maintain adequate ventilation.

Eye Protection:

Not required under intended use.

Skin Protection:


Respiratory Protection:


PHYSICAL AND CHEMICAL PROPERTIES

Appearance:

Fine solid powder

Color:

Yellow

Scent:

Odorless

Melting Point:

No data available

Specific Gravity(H2O=1):

4.5 - 5.5

Vapor Pressure:

Not applicable

Vapor Density (Air=1):

Not applicable

Evaporation Rate:

Not applicable

Solubility in Water:

Negligible

pH Value:

Not a water-based product, therefore not

applicable.

STABILITY AND REACTIVITY

Stability:

Stable

Incompatibility:

Not identified.

Hazardous Decomposition Products:

Carbon monoxide

and carbon dioxide.

Hazardous Polymerization:

Will not occur.

Oki CX3535MFP 58409501 Yellow Developer

Oki CX3535MFP Manual

Oki CX3535MFP manual content summary: