Oki CX3641MFP CX3641 MFP Fax Board Installation (English, Fran栩s, E

Oki CX3641MFP Manual

View all Oki CX3641MFP manuals Add to My Manuals Save this manual to your list of manuals

• 
  1
• 
  2
• 
  3
• 
  4
• 
  5
• 
  6
• 
  7
• 
  8
• 
  9
• 
  10
• 
  11
• 
  12

Match case Limit results 1 per page

---

100% Actual Size Fit Width Fit Height Fit Page Automatic

CX3641MFP

English . . . 1

Fran°ais . . .4

Espaæol . . . 7

PortuguŒs . . . 10

1

Fax Board Installation

___________________

Install the Fax Board in the Unit

Note

The fax board requires firmware server version

1.1 or higher. See °Version:± under

Server Info

in the CX3641 MFP Configuration printout.

Components

1

Fax Board

4

Ferrite Core

2

Screws (3)

5

FCC Label

3

Telephone cord

1. Press and hold the

SHUTDOWN/RESTART button

on the printer control panel,

and wait for the shutdown

process to complete.

2. Turn off the scanner (on/off switch is on the

back right), then turn off the printer.

3. If the optional finisher is installed, open the

release latch and pull it away from the printer.

4. Remove the two thumbscrews from the bumper

brackets holding the printer unit to the stand,

and gently pull the printer out to gain access to

the back panel.

5. Loosen the two thumb screws (1) and open the

access door.

6. Insert the fax board into the printer on the

lower right side.

1