Oki ES3640exMFP Fuser Installation Instructions
Oki ES3640exMFP Manual
 |
View all Oki ES3640exMFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki ES3640exMFP manual content summary:
- Oki ES3640exMFP | Fuser Installation Instructions - Page 1
is installed in your printer, press the SHUTDOWN/RESTART button for several seconds before turning the printer off. 4. Grasp the fuser handle and lift the fuser out of the printer. Dispose of it in accordance with local regulations. 2. Open the top cover. © 2005 Oki Data Americas, Inc. 58371802 - Oki ES3640exMFP | Fuser Installation Instructions - Page 2
5. Unpack the new fuser and lower it into the printer. 8. Turn the printer on. 6. Push the lock lever as shown to lock the fuser in place. 7. Close the top cover. Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054 WWW.OKIPRINTINGSOLUTIONS.COM/US
-
1 -
2
 |
 |
Fuser
Installation Instructions
Caution!
The fuser is very HOT after the
printer has been printing. Let the
printer cool down at least 10 minutes
before attempting to replace it.
To replace the fuser:
1.
Turn off the printer.
Note:
If the hard disk drive is installed in your
printer, press the SHUTDOWN/RESTART
button for several seconds before
turning the printer off.
2.
Open the top cover.
3.
Pull the fuser lock lever as shown to unlock the
fuser.
4.
Grasp the fuser handle and lift the fuser out of
the printer. Dispose of it in accordance with local
regulations.
' 2005 Oki Data Americas, Inc.
58371802