Oki MC780f MC770/MC780/MPS3537/MPS4242 Wireless Option Installation Sheet
Oki MC780f Manual
View all Oki MC780f manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki MC780f manual content summary:
- Oki MC780f | MC770/MC780/MPS3537/MPS4242 Wireless Option Installation Sheet - Page 1
GN-1060 with GN-3010 for MC760/MC770/MC780/ES7460/ES7470/ES7480/MPS3537/MPS4242 SET-UP GUIDE Warnings Points • The unpacking and setup procedure shall be done by a qualified service technician. • Be sure to unplug the power cable of the equipment before installing and setting up the product. • - Oki MC780f | MC770/MC780/MPS3537/MPS4242 Wireless Option Installation Sheet - Page 2
Setup 1. Take out the accessories. 2. Take off the cover. * You must wear gloves for this procedure. 1) Remove [b] and [e]. • b: 1 • e: 1 2) Open [F]. b e F 3) Push the locking button to open [G]. G 4) Remove [b]. 5) Remove [e]. b e GN-1060 with GN-3010 2 / 9 - Oki MC780f | MC770/MC780/MPS3537/MPS4242 Wireless Option Installation Sheet - Page 3
tools, be sure not to put your face and hands in the direction in which force will be applied; otherwise this could result in injury. 9) Release the latches (B) of the cover. • B: 2 * As shown in the figure, insert a flathead screwdriver into the groove and push it in the direction of the arrow - Oki MC780f | MC770/MC780/MPS3537/MPS4242 Wireless Option Installation Sheet - Page 4
the direction in which force will be applied; otherwise this could result in injury. 11) Closer [F]. D F 12) Take off the upper side of the cover, release the latch (E) and then take off the cover. • E: 1 place E 3. Cut out the gray portion shown in the figure and dispose of it. GN-1060 with - Oki MC780f | MC770/MC780/MPS3537/MPS4242 Wireless Option Installation Sheet - Page 5
4. Loosen the screws and take off the cover. • Screws: 15 places 5. Set [A] as shown in the figure. * Making sure that its terminal contacts that of [A], fully insert the connector and push it to the board side to set it. A A 6. Wire the cable of [D] as shown in the figure, and then hook [D]. D - Oki MC780f | MC770/MC780/MPS3537/MPS4242 Wireless Option Installation Sheet - Page 6
8. Wire the cable of [D] inside the product as shown in the figure. B A D 9. Attach [E] and [H]. • E: 1 • H: 2 E H H 10. Set [J] to the position of the cable indicated in the figure, and fix it with [H]. • H: 2 J H J H 11. Loop the cable twice as shown in the figure, and fix it with [E]. • - Oki MC780f | MC770/MC780/MPS3537/MPS4242 Wireless Option Installation Sheet - Page 7
12. Pass the cable through the hole as shown in the figure, and connect it with [A]. 13. Attach the cover and tighten the screws. • Screws: 15 places 14. Insert its latch (E) and then the parts indicated by the arrows - Oki MC780f | MC770/MC780/MPS3537/MPS4242 Wireless Option Installation Sheet - Page 8
16. Open [F]. F 17. Insert the latch (D) of the cover. D 18. Close the covers in the order of (A) and (B). A B 19. Push the locking button to open [G]. G 20. Attach [b]. • b: 1 b GN-1060 with GN-3010 8 / 9 - Oki MC780f | MC770/MC780/MPS3537/MPS4242 Wireless Option Installation Sheet - Page 9
21. Attach [b] and [e]. • b: 1 • e: 1 22. Attach [e]. • e: 1 23. Close in the order of [G] and [F]. G F b e e 24. Affix the label [B]. • B: 1 25. The operation is now completed. 9 / 9 B 1mm OR 1mm B GN-1060 with GN-3010 45564403EE Rev.1
1 / 9
GN-1060 with GN-3010
GN-1060
with GN-3010
for MC760/MC770/MC780/ES7460/ES7470/ES7480/MPS3537/MPS4242
SET-UP GUIDE
Warnings Points
• The unpacking and setup procedure shall be done by a qualified service technician.
• Be sure to unplug the power cable of the equipment before installing and setting up the product.
• Disconnect the ground wire after unplugging the power cable. In addition, be sure to connect the ground wire
before plugging the power cable.
Cautionary Points
• Install the equipment near an outlet. Be sure to wire the power cable securely so as to unplug it easily and not
to trip over it.
• According to the equipment model, these illustrations may differ.
• The covers of this equipment have been designed so as not to be easily removed.Therefore, when using
tools, be sure not to put your face and hands in the direction in which force will be applied; otherwise this could
result in injury. In addition, pay attention not to deform parts by using too much force.
• When unpacking and setting up the product, be sure to wear gloves to avoid injury.
±
Accessories
GN-1060
GN-3010
A
B
D
E
f
J
H