Oki OKICOLOR8cccs OKICOLOR 8 Series Setup Guide
Oki OKICOLOR8cccs Manual
 |
View all Oki OKICOLOR8cccs manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki OKICOLOR8cccs manual content summary:
- Oki OKICOLOR8cccs | OKICOLOR 8 Series Setup Guide - Page 1
1 Remove the top cushions. 2 Lift the printer from the box and place it on a suitable support. 3 Remove it from the plastic bag. 4 Remove the shipping tape. 5 Remove the control panel protective film. 6 Open the front tray and pull out the shipping retainer, then close the tray. | Setup Guide 1 - Oki OKICOLOR8cccs | OKICOLOR 8 Series Setup Guide - Page 2
side panel. 2 Pull the latch and open the side panel. Remove any blue shipping retainers. 3 Put the toner waste box into the printer as shown. Press down, then swing the box into the printer and release. ! Our quality assurance department tests every unit before it is shipped. As a result, you - Oki OKICOLOR8cccs | OKICOLOR 8 Series Setup Guide - Page 3
the blue lock lever is toward the 8 Pull the blue lock lever forward to lock the see a blue shipping retainer, remove it. back of the printer. oil roller in place. 3 Open the printer cover. 6 Lower the oil roller into the fuser unit, sliding the left end under the retaining ledge. | Setup - Oki OKICOLOR8cccs | OKICOLOR 8 Series Setup Guide - Page 4
want to do this holding the drum over a trash can to catch any toner clinging to the sponge. 4 Place the image drums back into the printer, matching the color coded label with the label in the printer. © © To catch any toner spillage, you may want to set the drums on a few sheets of paper - Oki OKICOLOR8cccs | OKICOLOR 8 Series Setup Guide - Page 5
corresponding color image drum. ! Be careful to install each color toner cartridge in the corresponding color image drum (C=cyan, M=magenta, for the three remaining toner cartridges. 7 Remove the protective paper from all four image drums. 2 Shake each cartridge to distribute toner. 5 Lower the - Oki OKICOLOR8cccs | OKICOLOR 8 Series Setup Guide - Page 6
on media and paper paths, see your Handy Reference or Online User's Guide. The Paper Tray Gauge The red paper tray gauge on the front of in place with the screws. Macintosh Systems You need: • An OKICOLOR 8n model printer, or the optional Okilan 6100e Print Server (P/N 70034201) • A UTP cable with - Oki OKICOLOR8cccs | OKICOLOR 8 Series Setup Guide - Page 7
screen appears. 6 Click Auto Setup to have the Adobe Printer Driver configure your printer automatically OR Click Select PPD to select a PPD file manually. 7 Follow the instructions on your screen to finish. The Demo page prints. Select the Printer: 21 Print the OKICOLOR 8 menu: press ON LINE on - Oki OKICOLOR8cccs | OKICOLOR 8 Series Setup Guide - Page 8
From the list, select the tray you want to calibrate. Go to Step 4 to continue. Windows and Macintosh 4 Click Print Color Calibration page. The printer prints a test page with 9 sections, each with a series of lined boxes in it. Lined Boxes Lined Box Numbers Section #1 List Box 5 Beginning with - Oki OKICOLOR8cccs | OKICOLOR 8 Series Setup Guide - Page 9
and prints a color balance verification page. ! Important: Do not go back to step 2 to check the color balance. The utility resets the printer to its default settings each time it prints the test pattern. Congratulations! Your OKICOLOR 8 is ready to print beautiful color documents. | Setup Guide 9 - Oki OKICOLOR8cccs | OKICOLOR 8 Series Setup Guide - Page 10
Toner Indicators *Printer Clears error condition and returns printer on line. Press: In Menu Mode advances to next item. Hold: Deletes data in buffer and executes internal User's Guide on the OKICOLOR 8 CD for details on the control panel and printer menus. | 10 OKICOLOR 8 * The printer comes set - Oki OKICOLOR8cccs | OKICOLOR 8 Series Setup Guide - Page 11
- Oki OKICOLOR8cccs | OKICOLOR 8 Series Setup Guide - Page 12
manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by Oki Data. Copyright 1999 Oki Data Americas, Inc. All rights reserved. First edition
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Setup Guide
|
1
Remove the accessory tray
and check the contents
Select a Location
•
Firm, level surface
capable of supporting
at least110 lbs (50 kg).
•
Clearance to open cover, paper tray and
Special Media Stacker (rear exit)
•
At least 4 inches (102 mm) additional
clearance on both sides
•
Nearby power source
•
Room temperature:
–
Ideal: 62.6 to 80.6ºF (17 to 27ºC):
–
Maximum Permissible: 50 to 89.6ºF
(10 to 32ºC)
•
Relative humidity:
–
Ideal: 50 to 70% RH
–
Maximum Permissible: 20 to 80% RH
•
Away from direct sunlight
Unpack
Remove Packaging
!
The printer weighs approximately 106
lb (48 kg). Use a least two (2) people to
carry the printer. Use appropriate lifting
techniques.
1
Remove the top cushions.
2
Lift the printer from the box and place it
on a suitable support.
3
Remove it from the plastic bag.
4
Remove the shipping tape.
5
Remove the control panel protective film.
6
Open the front tray and pull out the
shipping retainer, then close the tray.
Overview
1 Unpack
........................................
1
2
Install the Toner Waste Box... 4
3
Install the Oil Roller
................
5
4
Prepare the Image Drums
......
6
5
Install the Toner Cartridges ... 7
6
Load paper
.................................
8
7
Connect to Your Computer
....
8
8
Connect to Power
.....................
9
9
Print the Demo Page
...............
9
10
Install Software
........................
9
11
Calibrate the Color
.................
10
•
Toner cartridges
(1 each: black,
magenta, cyan,
yellow)
•
Toner Waste Box
•
Oil Roller
•
CD
•
Image Drum Storage
Bags (4) and
Lens Cleaners (4)
•
Power Cord
1