Oki X400 X400 Cutter Assembly Instructions (English, Fran栩s)
Oki X400 Manual
View all Oki X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki X400 manual content summary:
- Oki X400 | X400 Cutter Assembly Instructions (English, Fran栩s) - Page 1
of labels, tags, or tickets. It has a back feed function for retracting the label back to the first print position after cutting. The instructions below assume that the unit has no other attachments that interfere with the cutter installation. CAUTION Printer electronics are susceptible to static - Oki X400 | X400 Cutter Assembly Instructions (English, Fran栩s) - Page 2
5. If the peeler (6) is present, remove the screw (7), then move the peeler to the right and lift it (6) off. 6. Remove the power switch (8) from the housing (9) and disconnect its leads. Tuck them safely away in the housing, leaving them unconnected. 7. Remove the two screws (10) securing the - Oki X400 | X400 Cutter Assembly Instructions (English, Fran栩s) - Page 3
Installation de l'assemblage de coupeuse L'assemblage de coupeuse permet la découpe automatisée des étiquettes, des étiquettes volantes, des tickets et des billets. Elle propose une fonction d'alimentation inversée pour ramener l'étiquette à la première position d'impression suite à une découpe. On - Oki X400 | X400 Cutter Assembly Instructions (English, Fran栩s) - Page 4
la vis (17). NOTE: Lorsqu'il est correctement installé, la patte du support de l'assemblage de coupeuse s'insère dans la fente du châssis d'imprimante de la décolleuse avant le retrait. 15. Assurez-vous que le support d'impression et le ruban sont chargés correctement dans l'imprimante, puis
Cutter Assembly Installation
........................
1
Installation de l'assemblage de coupeuse
.....
3
Cutter Assembly Installation
The cutter assembly permits the automated cutting of labels, tags, or tickets. It has a back feed function
for retracting the label back to the first print position after cutting. The instructions below assume that
the unit has no other attachments that interfere with the cutter installation.
CAUTION
Printer electronics are susceptible to static discharge. Ensure appropriate grounding
measures are taken before beginning any activity inside the printer.
1.
Turn off the power and disconnect the power supply cord.
2.
Lift the cover (1) to access the print assembly (2).
3.
Simultaneously press the two purple buttons located on the top side of the print assembly (2) and
pivot it upward.
4.
Remove the two screws (3) securing the front cover (4) to the cover hinge (5).
© 2009 Oki Data Americas, Inc.
58397001