Onkyo HT-S3910 Owners Manual - English
Onkyo HT-S3910 Manual
 |
View all Onkyo HT-S3910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Onkyo HT-S3910 manual content summary:
- Onkyo HT-S3910 | Owners Manual - English - Page 1
5.1-CHANNEL HOME THEATER SYSTEM HT-S3910 Instruction Manual En Table of contents ≫ Connections ≫ - Connecting Speakers ≫ Playback ≫ Setup ≫ Troubleshooting ≫ Appendix ≫ Supplementary Information ≫ Front Panel≫ Rear Panel≫ Remote≫ - Onkyo HT-S3910 | Owners Manual - English - Page 2
of added new functions 5 Firmware Update Procedure 6 Part Names 8 Front Panel 8 Display 10 Rear Panel 11 Remote Controller 13 Speaker/Subwoofer 14 Connections Connecting speakers 19 Speaker Installation 20 Speaker Connections and "Speaker Setup" Settings 25 Speaker combinations - Onkyo HT-S3910 | Owners Manual - English - Page 3
Formats and Selectable Listening Modes 58 About HDMI 93 Setup General Specifications 95 Setup Menu 65 Menu list 65 Menu operations 67 1. Start-up Wizard 83 Operations 83 Troubleshooting When the unit is operating erratically 86 Troubleshooting 87 3 Front Panel≫ Rear Panel≫ - Onkyo HT-S3910 | Owners Manual - English - Page 4
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. Main unit (HT-R398) (1) 2. Remote controller (RC-970R) (1), Batteries (AAA/ from sliding. • Quick Start Guide (1) * This document is an online instruction manual. It is not included as companies. • Specifications and appearance are subject - Onkyo HT-S3910 | Owners Manual - English - Page 5
and refer to "6. Miscellaneous" - "Firmware Update" - "Version" ( Operation of added new functions p80). If functions are added or changed from contents described in the Instruction Manual, see the following reference. Supplementary Information ≫ ❏❏Firmware Update Procedure ( p6) 5 Front Panel - Onkyo HT-S3910 | Owners Manual - English - Page 6
Setup ≫ Firmware Update Procedure Approx. 30 minutes are required for updating. Existing settings are kept after updating. Disclaimer: equipped with the security function are not supported. -- USB hubs and USB devices equipped with the hub function are not supported. Do not connect these devices to - Onkyo HT-S3910 | Owners Manual - English - Page 7
USB" with the cursors in order, then press ENTER. Setup 1. Input/Output Assign 2. Speaker 3. Audio Adjust 4. Source 5. Hardware 6. Miscellaneous 1. Tuner 2. Firmware Update 3. Initial Setup 4. Lock Connect the USB storage device to an external power source if it has its own power supply. • -51 - Onkyo HT-S3910 | Owners Manual - English - Page 8
Part Names Front Panel Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏For details, see ( p9) 8 Front Panel≫ Rear Panel≫ Remote≫ - Onkyo HT-S3910 | Owners Manual - English - Page 9
reproduced in appropriate listening mode. 5. Remote control sensor: Receives signals from the remote controller. • The reception range of off completely. 9. Display ( p10) 10. SETUP button: You can display advanced setting items on the TV and the display to have a more enjoyable experience with this - Onkyo HT-S3910 | Owners Manual - English - Page 10
in the following conditions. RDS (European, Australian and Asian models): Receiving RDS broadcasting. TUNED: Receiving AM/FM radio. FM ST: Receiving FM stereo. SLEEP: Sleep timer is set. ( p79) AUTO STBY: Auto Standby is set. ( p79) 6. Blinks when muting is on. 7. Displays various information of - Onkyo HT-S3910 | Owners Manual - English - Page 11
Rear Panel Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏For details, see ( p12) 11 Front Panel≫ Rear Panel≫ Remote≫ - Onkyo HT-S3910 | Owners Manual - English - Page 12
this unit with a USB cable. ( p32) The playback function of music files and power supply to smart phones/tablets, or other devices are not supported. 5. Power cord 6. TUNER AM/FM terminal: Connect the supplied antennas. 7. AUDIO IN jacks: Input TV or AV component audio signals with an analog audio - Onkyo HT-S3910 | Owners Manual - English - Page 13
. MEMORY button: Used to register AM/FM radio stations. ( p42) 12. SLEEP button: Set the sleep timer. Select the time from "30 min", "60 min" and "90 the compressed audio. 21. MODE button: Switches between automatic tuning and manual tuning for AM/FM stations ( p40). Also, when an HDMI CEC - Onkyo HT-S3910 | Owners Manual - English - Page 14
mount hole. • Wooden wall mount screw is not included. Please consult with a construction service personnel and prepare screw considering its type, material, and length so it provides sufficient support. Moreover, please also install a reinforcement panel, anchor, etc. if necessary. • Our company - Onkyo HT-S3910 | Owners Manual - English - Page 15
mount hole. • Wooden wall mount screw is not included. Please consult with a construction service personnel and prepare screw considering its type, material, and length so it provides sufficient support. Moreover, please also install a reinforcement panel, anchor, etc. if necessary. • Our company - Onkyo HT-S3910 | Owners Manual - English - Page 16
Subwoofer Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. Speaker jack: use the included speaker cable to connect to the main unit. ❏ Notice ( p17) 16 Front Panel≫ Rear Panel≫ Remote≫ - Onkyo HT-S3910 | Owners Manual - English - Page 17
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Notice • Do not place objects on the speaker system. The speaker system may drops or fall over by losing balance and may cause an injury. • Do not place on a shaky platform, sloping surface, or other unstable place. The speaker system may drop or fall - Onkyo HT-S3910 | Owners Manual - English - Page 18
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connections Connecting speakers 19 Connecting the TV 29 Connecting Playback Devices 32 Connecting an AV Component in a Separate Room (ZONE B Connection) 34 Connecting Antennas 35 Connecting the Power Cord 36 18 Front Panel≫ Rear Panel≫ - Onkyo HT-S3910 | Owners Manual - English - Page 19
. Use the following flow chart to select the speaker layout that suits your speakers and usage environment. You can check the connection method and default settings. Use height speakers? Yes • 3.1.2 Channel System ( p27) No • 5.1 Channel System ( p26) 19 Front Panel≫ Rear Panel≫ Remote - Onkyo HT-S3910 | Owners Manual - English - Page 20
front speakers should be positioned at ear height while the surround speakers should be positioned just above ear height. The center speaker should be set up facing the listening position at an angle. Placing the subwoofer between the center speaker and the front speaker gives you a natural sound - Onkyo HT-S3910 | Owners Manual - English - Page 21
Contents ≫ Connections ≫ Playback ≫ Setup ≫ „„3.1.2 Channel System A 3.1.2 Channel System is a speaker layout consisting of a 3.1 Channel System that includes front speakers, center speaker and subwoofer, and added height speakers. Select the height speakers that suit your speakers and usage - Onkyo HT-S3910 | Owners Manual - English - Page 22
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏Front High Speakers Installation Example 4 3 3´ (0.9 m) or more 2 5 1 6 a This is a 3.1-channel system consisting of front speakers, a center speaker, and a subwoofer, with the installation of front high speakers, a type of height speaker. - Onkyo HT-S3910 | Owners Manual - English - Page 23
the distance between the two front speakers. • Dolby Laboratories recommends the setups of these types of height speakers to obtain the best Dolby Atmos effect. 1,2 Front Speakers 3,4 Top Middle Speakers* 5 Center Speaker 6 Subwoofer * Optional items ❏❏Speaker Layouts and Selectable Listening Modes - Onkyo HT-S3910 | Owners Manual - English - Page 24
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏Dolby Enabled Speakers (Dolby Speakers) Installation Example 4* 3* 2* 5 1* 6 a Separately sold Dolby-enabled speakers have been selected as the height speakers for this system. Dolby enabled speakers are special speakers designed to face the - Onkyo HT-S3910 | Owners Manual - English - Page 25
Impedance" to "4 ohms" for "Speaker Setup" in the Initial Setup section ( p83). When setting "Speaker Impedance" from the Setup menu, press on the remote controller, and set "2. Speaker" - "Configuration" "Speaker Impedance" ( p71) to "4 ohms". „„Connect the Speaker Cables Make correct connection - Onkyo HT-S3910 | Owners Manual - English - Page 26
251 6 4 3 This is a basic 5.1 Channel System. For details of the speaker layout, refer to "Speaker Installation" ( p20). "Speaker Setup" settings during Initial Setup ( p84) Speaker Setup Speaker Channels Subwoofer Height Speaker 5.1 ch Yes - - - Select how many speakers you have. ENTER - Onkyo HT-S3910 | Owners Manual - English - Page 27
you have. ENTER Next • Speaker Channels: 3.1.2 ch • Subwoofer: Yes • Height Speaker: Select the type of height speaker actually installed. • Speaker Impedance: Set any value ( p25) This is a combination of the 3.1 Channel System and front high speakers. A front high speaker is a type of height - Onkyo HT-S3910 | Owners Manual - English - Page 28
Speaker combinations Speaker Channels 2.1 ch 3.1 ch 4.1 ch 5.1 ch 2.1.2 ch 3.1.2 ch FRONT Contents ≫ Connections ≫ Playback ≫ Setup ≫ CENTER SURROUND HEIGHT SUBWOOFER 28 Front Panel≫ Rear Panel≫ Remote≫ - Onkyo HT-S3910 | Owners Manual - English - Page 29
via an HDMI cable, and plays the audio of the TV on this unit. To check if the TV supports the ARC function, refer to the instruction manual of the TV, etc. Does your TV support the ARC function? Yes • To ARC TV ( p30) No • To Non-ARC TV ( p31) 29 Front Panel≫ Rear - Onkyo HT-S3910 | Owners Manual - English - Page 30
set "5. Hardware" - "HDMI" - "Audio Return Channel" to "On". ( p78) • For detailed settings for TV connection, CEC function and audio output, refer to the instruction manual check if the TV supports the ARC function, refer to the instruction manual of the TV, etc. TV 30 Front Panel≫ Rear Panel≫ - Onkyo HT-S3910 | Owners Manual - English - Page 31
≫ If the TV does not support the ARC (Audio Return Channel) function (*), connect an HDMI cable and digital optical cable. • If you use a cable set-top box, etc. connected to if the TV supports the ARC function, refer to the instruction manual of the TV, etc. TV 31 Front Panel≫ Rear Panel≫ - Onkyo HT-S3910 | Owners Manual - English - Page 32
jack of this unit. To supply power even when this unit is in standby mode, change the setting value of "USB Power Out at Standby" ( p79) to "On". • If a 4K has a "PREMIUM Certified Cable" label. • The POWER OUT jack cannot support playback of music files or power supply to smart phones/tablets, or - Onkyo HT-S3910 | Owners Manual - English - Page 33
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using a digital coaxial cable or analog audio cable. OR b a a Analog audio cable, b Digital coaxial cable CD 33 Front Panel≫ Rear Panel≫ Remote - Onkyo HT-S3910 | Owners Manual - English - Page 34
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting an AV Component in a Separate Room (ZONE B Connection) Connecting a Pre-main Amplifier (ZONE B) While performing playback in the main room (ZONE A), you can enjoy 2-ch audio of the same source in the separate room (ZONE B) at the same time - Onkyo HT-S3910 | Owners Manual - English - Page 35
Connecting Antennas Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape. b (North American and Taiwanese - Onkyo HT-S3910 | Owners Manual - English - Page 36
Connecting the Power Cord Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connect the power cord after all the connections are completed. a Power cord a 36 Front Panel≫ Rear Panel≫ Remote≫ - Onkyo HT-S3910 | Owners Manual - English - Page 37
Playback AV Component Playback BLUETOOTH® Playback Listening To the AM/FM Radio ZONE B Playback Convenience functions Listening Mode Contents ≫ Connections ≫ Playback ≫ Setup ≫ 38 39 40 45 47 50 37 Front Panel≫ Rear Panel≫ Remote≫ - Onkyo HT-S3910 | Owners Manual - English - Page 38
Contents ≫ Connections ≫ Playback ≫ Setup ≫ AV Component Playback You can play the audio from AV components, such as Blu-ray disc players through this unit. Basic Operations TV's REMOTE INPUT Inputs TV HDMI 1 HDMI 2 HDMI 3 Perform the following procedure when this unit is on. 1. Switch the - Onkyo HT-S3910 | Owners Manual - English - Page 39
is on. Pairing 1. When you press the BLUETOOTH button, "Now Pairing..." is displayed on this unit's display, and the pairing mode is enabled. Onkyo HT-R398 XXX 2. Enable (turn on) the BLUETOOTH function of the BLUETOOTH-enabled device, and then select this unit from among the devices displayed. If - Onkyo HT-S3910 | Owners Manual - English - Page 40
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening To the AM/FM Radio You can receive AM and FM radio stations on this unit with the built-in tuner. Tuning into a Radio Station Perform the following procedure when this unit is - Onkyo HT-S3910 | Owners Manual - English - Page 41
of the sensitivity of the reception. Tuning Manually Note that if you tune manually, the reception for FM broadcasts will be continuously, and if the button is released, the frequency stops changing. Frequency step setting Press , and using the cursors and ENTER, select "6. Miscellaneous" - "Tuner" - Onkyo HT-S3910 | Owners Manual - English - Page 42
Presetting a Radio Station Contents ≫ Connections ≫ Playback ≫ Setup ≫ Registration Procedure You can preset up to 40 of your favorite AM/FM radio stations. After tuning in to the AM/FM radio station you want to register, perform the following procedure. 1. Press MEMORY so that the preset - Onkyo HT-S3910 | Owners Manual - English - Page 43
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Selecting a Preset Radio Station 1. Press TUNER. 2. Press the cursors / to select a preset number. Deleting a Preset Radio Station 1. Press TUNER. 2. Press the cursors / to select the preset number to delete. 3. After pressing MEMORY, press CLEAR while - Onkyo HT-S3910 | Owners Manual - English - Page 44
press on the remote controller twice. • If none of the Program Types are set for the radio station under reception, "None" is displayed. 2. Press the station blinks on the display. Pressing the ENTER button in this state will receive that station. If you don't press the ENTER button, the unit starts - Onkyo HT-S3910 | Owners Manual - English - Page 45
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ZONE B Playback While performing playback in the main room (ZONE A), you can enjoy the audio of the same source in the separate room (ZONE B) at the same time. Playing Back 1. Press ZONE A/B to select an audio output destination. • ZONE A: Outputs audio - Onkyo HT-S3910 | Owners Manual - English - Page 46
Contents ≫ Connections ≫ Playback ≫ Setup ≫ If "ZONE A+B" is selected as an audio output destination, you can select only the "Stereo" listening mode for the main room (ZONE A) when using the 2.1ch speaker layout. When using a speaker layout of 3.1ch or more, you can select only the "AllCh Stereo - Onkyo HT-S3910 | Owners Manual - English - Page 47
playback, you can select an input selector to which video input is not assigned, such as "CD", "TUNER", and "BLUETOOTH". • When "OSD Language" ( p68) is set to Chinese, the audio from "BLUETOOTH" cannot be played. Perform the following procedure when this unit is on. 1. Switch the input on the TV to - Onkyo HT-S3910 | Owners Manual - English - Page 48
≫ Connections ≫ Playback ≫ Setup ≫ Adjusting TREBLE/BASS You can adjust the sound quality of the front speakers. 1. Press TREBLE or BASS to select the setting to adjust. TREBLE: Enhances or moderates the high-tone range of the front speakers. BASS: Enhances or moderates the low-tone range of the - Onkyo HT-S3910 | Owners Manual - English - Page 49
to select the time from "30 min", "60 min" and "90 min". "Off": The unit does not automatically enter standby mode. You can also set this by pressing the button on the remote controller and selecting "5. Hardware" - "Power Management" - "Sleep Timer" ( p79) on the Setup menu. 49 Front Panel - Onkyo HT-S3910 | Owners Manual - English - Page 50
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode by pressing STEREO, MOVIE/TV or MUSIC. Selecting a Listening mode 1. Press one from among STEREO, MOVIE/TV and MUSIC during playback. - Onkyo HT-S3910 | Owners Manual - English - Page 51
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Checking the input format and listening mode Pressing button on the remote controller or INFO button on the main unit repeatedly will switch the display of the main unit in the following order. • When using a BLUETOOTH connection, press the INFO button - Onkyo HT-S3910 | Owners Manual - English - Page 52
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Listening mode Speaker layout 2.1 ch 3.1 ch DD (Dolby Audio - DD) (*1) DD+ (Dolby Audio - DD+) (*1) DTHD (Dolby - Onkyo HT-S3910 | Owners Manual - English - Page 53
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening mode DTS DTS 96/24 DTS-HD HR (DTS-HD High Resolution) DTS-HD Master (DTS-HD Master Audio) DTS Express DTS:X DTS Neural:X DTS Virtual:X Multich (Multichannel) DSD Direct Stereo Mono Full Mono AllCh Stereo Orchestra Studio-Mix TV Logic - Onkyo HT-S3910 | Owners Manual - English - Page 54
firmware is updated after purchase or the firmware is switched in the product production process. For details of firmware update, see "Additional Function (Firmware Update an HDMI cable and set the audio output on the player to Bitstream output. „„ Atmos (Firmware version supporting Atmos 2.0, etc.) - Onkyo HT-S3910 | Owners Manual - English - Page 55
channel. • To enable transfer of this audio format, connect via an HDMI cable and set audio output on the player to Bitstream output. „„ DSur (Dolby Audio - Surr) (Firmware version before supporting DSur 2.0, etc.) This listening mode expands actual channels to more channels for playback according - Onkyo HT-S3910 | Owners Manual - English - Page 56
to record a maximum of 7.1 channels with additional channels such as the surround back channel. It also supports low bit rates. • To enable transfer of this audio format, connect via an HDMI cable and set audio output on the player to Bitstream output. „„DTS-HD HR (DTS-HD High Resolution) This mode - Onkyo HT-S3910 | Owners Manual - English - Page 57
set to "Off" (Default: On). * This function will become unavailable for selection if the firmware is updated after purchase or the firmware is switched in the product production process. For details of firmware update, see "Additional Function (Firmware Update " ( p73) is set to "Off" (Default - Onkyo HT-S3910 | Owners Manual - English - Page 58
T-D*1 Surround Enhancer*1 *1 Cannot be selected if "Speaker Virtualizer" is set to "Off". *2 Cannot be selected when height speakers are installed. input format is monaural. *2 Cannot be selected if "Speaker Virtualizer" is set to "Off". *3 Cannot be selected when height speakers are installed. - Onkyo HT-S3910 | Owners Manual - English - Page 59
need to be installed. *3 Cannot be selected if "Speaker Virtualizer" is set to "Off". *4 Cannot be selected when height speakers are installed. *5 Surround AllCh Stereo Full Mono T-D*2 Surround Enhancer*2 *1 With the firmware version before supporting Atmos 2.0, etc., you can select the DD+ or - Onkyo HT-S3910 | Owners Manual - English - Page 60
surround speakers need to be installed. *3 Cannot be selected when the input format is monaural. *4 Cannot be selected if "Speaker Virtualizer" is set to "Off". *5 Cannot be selected when height speakers are installed. *6 Surround speakers or height speakers need to be installed. *7 A center speaker - Onkyo HT-S3910 | Owners Manual - English - Page 61
input format is monaural. *2 Cannot be selected if "Speaker Virtualizer" is set to "Off". *3 Cannot be selected when height speakers are installed. *4 need to be installed. *2 Cannot be selected if "Speaker Virtualizer" is set to "Off". *3 Cannot be selected when height speakers are installed. *4 - Onkyo HT-S3910 | Owners Manual - English - Page 62
speakers need to be installed. *3 Cannot be selected if "Speaker Virtualizer" is set to "Off". *4 Cannot be selected when height speakers are installed. *5 Surround Studio-Mix AllCh Stereo Full Mono *1 With the firmware version before supporting Atmos 2.0, etc., you can select the DD+ or - Onkyo HT-S3910 | Owners Manual - English - Page 63
surround speakers need to be installed. *3 Cannot be selected when the input format is monaural. *4 Cannot be selected if "Speaker Virtualizer" is set to "Off". *5 Cannot be selected when height speakers are installed. *6 Surround speakers or height speakers need to be installed. *7 A center speaker - Onkyo HT-S3910 | Owners Manual - English - Page 64
DTS Neural:X DTS Virtual:X*1 *2 Orchestra*3 Unplugged*3 Studio-Mix*3 AllCh Stereo*4 Full Mono*4 *1 Cannot be selected if "Speaker Virtualizer" is set to "Off". *2 Cannot be selected when height speakers are installed. *3 Surround speakers or height speakers need to be installed. *4 A center - Onkyo HT-S3910 | Owners Manual - English - Page 65
1. IntelliVolume Adjust the volume level when there are differences in volume level among multiple devices p75 connected to this unit. 2. Name Edit Set an easy name for each input. p75 Audio Select Select the priority for input selection when multiple audio sources are connected to one input - Onkyo HT-S3910 | Owners Manual - English - Page 66
for the Bluetooth function. p78 3. Power Management Change the settings for the power-save function. p79 6. Miscellaneous 1. Tuner Change the frequency step for the tuner. p80 2. Firmware Update Change the settings for Firmware Update. p80 3. Initial Setup Make the initial setup from the - Onkyo HT-S3910 | Owners Manual - English - Page 67
Menu operations Contents ≫ Connections ≫ Playback ≫ Setup ≫ Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Setup menu. Setup 1. Input/Output Assign 2. Speaker 3. Audio Adjust 4. Source 5. Hardware 6. Miscellaneous 1. - Onkyo HT-S3910 | Owners Manual - English - Page 68
": When this function is not to be used "Auto": When this function is to be used Select "Off" if your TV does not support 4K. When you have set "1080p -> 4K Upscaling" to "Auto", you can select the degree of video signal correction from "Off" and between "1" (weak) and "3" (strong). Select the - Onkyo HT-S3910 | Owners Manual - English - Page 69
the BD/DVD button. If you do not assign a jack, select "---". To select an HDMI IN jack already assigned to another input selector, change its setting to "---" first. "HDMI 1" to "HDMI 4": Assign a desired HDMI IN jack to the GAME button. If you do not assign a jack, select "---". To select an HDMI - Onkyo HT-S3910 | Owners Manual - English - Page 70
", "OPTICAL": Assign a desired DIGITAL IN jack to the TV button. • Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 to "AUDIO 3": Assign a desired AUDIO IN jack to the PC button. The setting cannot be changed. "AUDIO 1" to "AUDIO 3": Assign a desired AUDIO IN - Onkyo HT-S3910 | Owners Manual - English - Page 71
to "Full Band", and the low pitched range of the other channels is output from the front speakers. Refer to the instruction manual of your speakers to make the setting. Select the crossover frequency from "40 Hz" to "200 Hz" to start outputting frequencies for each channel. "Full Band": Full band - Onkyo HT-S3910 | Owners Manual - English - Page 72
Default Value 12.0 ft/3.60 m 12.0 ft/3.60 m 12.0 ft/3.60 m 9.0 ft/2.70 m 9.0 ft/2.70 m 7.0 ft/2.10 m 7.0 ft/2.10 m 12.0 ft/3.60 m Setting Details Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the - Onkyo HT-S3910 | Owners Manual - English - Page 73
Front Left Center Front Right Height Left Height Right Surround Right Surround Left Subwoofer Default Value 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB Setting Details Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select - Onkyo HT-S3910 | Owners Manual - English - Page 74
are output at the same time. • For multiplex audio broadcasts, pressing the button on the remote controller will display "1+1" on the main unit's display. Set the input channel to play 2-ch digital sources such as Dolby Digital, or 2-ch analog/PCM sources in the Mono listening mode. "Left": Left - Onkyo HT-S3910 | Owners Manual - English - Page 75
level of when the power is turned on. Select a value from "Last" (Volume level before entering standby mode), "Min", "1" to "99" and "Max". • You cannot set a higher value than that of "Maximum Volume". Adjust the output level of headphones. Select a value between "-12 dB" and "+12 dB". 4. Source - Onkyo HT-S3910 | Owners Manual - English - Page 76
"ARC": When giving priority to the input signal from ARC-compatible TV. • This item can be selected only when "5. Hardware" - "HDMI" - "Audio Return Channel" is set to "On" and also the "TV" input is selected. "HDMI": When giving priority to the input signal from HDMI IN jacks • This item can be - Onkyo HT-S3910 | Owners Manual - English - Page 77
closing the operation screen will display the name of the connected CEC-compatible device and "CEC On" on the main unit's display. • When this is set to "On", the power consumption in standby mode may increase. (Depending on the TV status, the unit will enter the normal standby mode.) • If you - Onkyo HT-S3910 | Owners Manual - English - Page 78
operation of the BLUETOOTH-enabled device. "Off": The function is disabled. • If the input is not switched automatically, set this to "Off", and change the input manually. This function automatically reconnects to the BLUETOOTH-enabled device connected last when you change the input to "BLUETOOTH - Onkyo HT-S3910 | Owners Manual - English - Page 79
information on how to clear the pairing information, refer to the instruction manual of the BLUETOOTH-enabled device. Displays the name of the BLUETOOTH USB Power Out at Standby Default Value On/Off Off Off Setting Details This setting allows the unit to enter standby mode automatically after 20 - Onkyo HT-S3910 | Owners Manual - English - Page 80
, all radio presets are deleted. „„2. Firmware Update Change the settings for Firmware Update. Setting Item Version Update via USB Default Value - Setting Details The current firmware version is displayed. Press ENTER to select when updating the firmware via USB. „„3. Initial Setup Make the - Onkyo HT-S3910 | Owners Manual - English - Page 81
Q. „„HDMI A/V Sync: If the video is behind the audio, you can delay the audio to offset the gap. The setting can be set for each input. • It cannot be set if the listening mode is Direct. Audio Return Channel: You can enjoy the sound of the HDMI-connected ARCcompatible TV through the speakers - Onkyo HT-S3910 | Owners Manual - English - Page 82
- TrueHD, Multichannel, DTS, DTS-ES, DTS 96/24, DTS-HD High Resolution, DTS-HD Master Audio, DTS Neural:X, DTS Express and DSD. • It cannot be set if the listening mode is Direct. „„Level Front: Adjust the speaker level of the front speaker while listening to the sound. Center: Adjust the speaker - Onkyo HT-S3910 | Owners Manual - English - Page 83
turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for startup using simple operations following on-screen guidance. 1. Switch the input of the TV to the input connected to the unit. 2. Put - Onkyo HT-S3910 | Owners Manual - English - Page 84
the test tone. Press ENTER after confirmation. 4. If there is no problem with the speaker connection, select "Next" and press ENTER. To return „„2. ARC Setup To connect with an ARC-compatible TV, select "Yes". The ARC setting on this unit turns on, and you can listen to the TV's audio through this - Onkyo HT-S3910 | Owners Manual - English - Page 85
≫ Troubleshooting „„Tuner 91 „„BLUETOOTH function 91 Before starting the procedure „„ZONE B function 92 Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, „„Remote Controller 92 setting - Onkyo HT-S3910 | Owners Manual - English - Page 86
, press and hold the ON/STANDBY button of the main unit for at least 5 seconds, and then restart the unit. (The settings on this unit are kept.) If the problem persists after restarting the unit, unplug and plug the power cords or HDMI cable of this unit and connected devices. ❏❏Resetting the - Onkyo HT-S3910 | Owners Manual - English - Page 87
≫ Troubleshooting „„Power outlet immediately, and contact the dealer or our company's Support. „„Audio • Confirm that the connection between the output set to "On", no sound is played if signals other than PCM are input. Change the setting to Off. Check the following if the problem persists - Onkyo HT-S3910 | Owners Manual - English - Page 88
unit to the position of the terminal to which the player is connected. • Check the digital audio output setting on the connected device. On some game consoles, such as those supporting DVD, the default setting may be off. • For some DVD-Video discs, you need to select an audio output format from - Onkyo HT-S3910 | Owners Manual - English - Page 89
The beginning of audio received by an HDMI IN cable or digital optical cable. Also, audio output need to be set to Bitstream output on the connected Blu-ray Disc player, etc. button on the main unit. Check the following if the problem persists after you have confirmed the above. ❏❏Cannot select a - Onkyo HT-S3910 | Owners Manual - English - Page 90
. Check the following if the problem persists after you have confirmed the support the resolution of the video input from the player. Change the setting set "5. Hardware" - "HDMI" - "HDMI CEC" to "On". • It is also necessary to set HDMI linking on the CEC-compliant device. Check the instruction manual - Onkyo HT-S3910 | Owners Manual - English - Page 91
must support the the problem persists set low, the audio may not be played back. Turn up the volume of the BLUETOOTH-enabled device. • Depending on the BLUETOOTH-enabled device, the Send/Receive selector switch may be equipped. Select Send mode. • Depending on the characteristics or specifications - Onkyo HT-S3910 | Owners Manual - English - Page 92
≫ Connections ≫ Playback ≫ Setup ≫ „„ZONE B function ❏❏Cannot ZONE B-output the audio of externally connected AV components • To output audio to ZONE B, set the audio output destination to "ZONE A+B" or "ZONE B". „„Remote Controller • Make sure that the batteries are inserted with the correct - Onkyo HT-S3910 | Owners Manual - English - Page 93
of January 2019) Toshiba brand televisions; Sharp brand televisions; Onkyo and Integra brand RIHD-compatible players; Toshiba brand players and TV. 4K: This unit supports 4K (3840×2160p) and 4K SMPTE (4096×2160p) video signals. Lip Sync: This setting automatically corrects desynchronization between - Onkyo HT-S3910 | Owners Manual - English - Page 94
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Supported resolutions HDMI IN1 to IN4: • Copyright protection technology: HDCP1.4/HDCP2.2 • Color space (Color Depth): -- 720×480i 60 Hz, 720×576i 50 Hz, 720×480p 60 - Onkyo HT-S3910 | Owners Manual - English - Page 95
Ω Headphone Rated Output 80 mW + 80 mW (32 Ω, 1 kHz, 10% THD) Supported impedance of Headphones 8 Ω - 600 Ω Headphones Frequency Response 10 Hz - 100 kHz „„ ) Preset Channel 40 „„BLUETOOTH Section Communication system BLUETOOTH Specification version 4.2 Frequency band 2.4 GHz band Modulation method - Onkyo HT-S3910 | Owners Manual - English - Page 96
IN1 (BD/DVD), IN2 (GAME), IN3 (CBL/SAT), IN4 (STRM BOX) Output OUT Supported Audio Return Channel, 3D, 4K 60 Hz, 6G, HDR10, BT.2020, HLG, Dolby TV with the same resolution as the input resolution. When using a TV that supports 4K, 1080p HDMI video signals can also be output as 4K. „„Audio Inputs - Onkyo HT-S3910 | Owners Manual - English - Page 97
≫ Connections ≫ Playback ≫ Setup ≫ „„Audio Outputs Analog ZONE B LINE OUT 2 SUBWOOFER PRE OUT Speaker Outputs FRONT L/R (North American models support banana plugs.), CENTER, SURROUND L/R, SUBWOOFER Phones PHONES (Front, ø 6.3 mm, 1/4") „„Front speaker (SKF-398) Speaker Type Full-Range, Acoustic - Onkyo HT-S3910 | Owners Manual - English - Page 98
× H × D) 230 mm × 389 mm × 331.5 mm 9-1/16" × 15-5/16" × 13-1/4" Weight 4.6 kg (10.1 lbs) „„Others USB: 1 (Only for supplying power to Streaming media player, 5 V/1.0 A) Specifications and features are subject to change without notice. ❏❏ License and Trademark 98 Front Panel≫ Rear Panel≫ Remote≫ - Onkyo HT-S3910 | Owners Manual - English - Page 99
SN 29403612_EN (C) Copyright 2019 Onkyo & Pioneer Corporation Japan. All rights reserved. H1903-0
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
 |
 |
Front Panel
≫
Rear Panel
≫
Remote
≫
5.1-CHANNEL HOME THEATER SYSTEM
Instruction Manual
HT-S3910
En
Table of contents
≫
Connections
≫
- Connecting Speakers
≫
Playback
≫
Setup
≫
Troubleshooting
≫
Appendix
≫
Supplementary Information
≫