Onkyo HT-S6200 Owner Manual

Onkyo HT-S6200 Manual

Get Onkyo HT-S6200 PDF manuals and user guides
UPC - 751398009051
View all Onkyo HT-S6200 manuals
Add to My Manuals
Save this manual to your list of manuals

Onkyo HT-S6200 manual content summary:

  • Onkyo HT-S6200 | Owner Manual - Page 1
    1ch Home Theater System HT-S6200 AV Receiver (HT-R670) Speaker Package (HTP-670) Front Speakers (SKF-670) Center Speaker (SKC-670) Surround Speakers (SKR-670) Surround Back Speakers (SKB-670) Powered Subwoofer (SKW-770) Dock for iPod (UP-A1) Instruction Manual Thank you for purchasing an Onkyo 7.1ch
  • Onkyo HT-S6200 | Owner Manual - Page 2
    servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions . 12. Use only with the cart, stand, PORTABLE CART WARNING tripod, bracket, or
  • Onkyo HT-S6200 | Owner Manual - Page 3
    this unit, have it checked by your Onkyo dealer. 8. Handling Notes • If with the instructions, may cause receiver is connected. • Consult the dealer or an experienced radio/TV techni- cian for help. For Canadian Models NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. For models
  • Onkyo HT-S6200 | Owner Manual - Page 4
    connecting or discon- necting audio cables (always turn off your amplifier before connecting or disconnecting cables). 7. Microphone feedback. Make sure you have the following items: AV receiver HT-R670 HT-R670 Remote controller and two batteries (AA/R6) Speaker setup microphone Indoor FM antenna
  • Onkyo HT-S6200 | Owner Manual - Page 5
    on the AV receiver's power cord (adapter varies from country to country). *How to mount the AC plug: Surround back speakers (SKB-670) Powered Subwoofer (SKW-770) Dock for iPod UP-A1 (Red) (White) (Green) Speaker cable for front speakers and center speaker Front speakers 11 ft (3.5 m) Center
  • Onkyo HT-S6200 | Owner Manual - Page 6
    Standby 40 First Time Setup 41 HDMI Input Setup 41 Component Video Input Setup 42 Digital Input Setup 43 Speaker Settings 44 Changing the Input Display 45 Audyssey 2EQ™ Room Correction and Speaker Setup 46 6 Basic Operations Basic Operations 49 Basic AV receiver Operation 49 Adjusting the
  • Onkyo HT-S6200 | Owner Manual - Page 7
    Accurate 32-bit DSP Processing Connections • 4 HDMI*4 Inputs and 1 Output (ver.1.3a to Support Deep Color, x.v. Color*, Lip Sync, DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD and Multichannel PCM) • Onkyo for System Control • HDTV-Ready Component
  • Onkyo HT-S6200 | Owner Manual - Page 8
    (sold separately). *6. Manufactured under license from Audyssey Laboratories. U.S. and foreign patents pending. Audyssey 2EQ™, Audyssey Dynamic Volume™ and Audyssey Dynamic EQ™ are trademarks of Audyssey Laboratories. *7 Theater-Dimensional is a trademark of Onkyo Corporation. * iPod is trademark of
  • Onkyo HT-S6200 | Owner Manual - Page 9
    Multiroom Capability You can use two speaker systems with this AV receiver-a surround-sound speaker system (up to 7.1 channels) in your main listening room, a stereo speaker system in a second room, or Zone 2, as we call it. And, you can select a different audio source for each room. Main Room: In
  • Onkyo HT-S6200 | Owner Manual - Page 10
    to On or Standby. C STANDBY indicator (40) Lights up when the AV receiver is on Standby and flashes while a signal is being received from the remote controller. D ZONE 2 indicator (82) Flashes when Zone 2 is being set. Lights up when Zone 2 is on. [-] & [+] buttons (50, 83) Used to adjust the
  • Onkyo HT-S6200 | Owner Manual - Page 11
    various information. G Audio input indicators Indicate the type of audio input that's selected as the audio source: PCM, MULTI CH, or HDMI. H Audyssey indicator (47, 70) Flashes during Audyssey 2EQ™ Room Correction and Speaker Setup. Lights up when the "Equalizer Settings" is set to "Audyssey". 11
  • Onkyo HT-S6200 | Owner Manual - Page 12
    "Component Video Input Setup" on page 42. E COMPONENT VIDEO OUT This RCA component video output is for connecting a TV or projector with a component video input. 12 F HDMI IN 1-4 and OUT HDMI (High Definition Multimedia Interface) connections carry digital audio and digital video. The HDMI inputs
  • Onkyo HT-S6200 | Owner Manual - Page 13
    Front & Rear Panels-Continued K V REMOTE CONTROL This V (Remote Interactive) jack can be connected to the V jack on another V-capable Onkyo component for remote and system control. To use V, you must make an analog audio connection (RCA) between the AV receiver and the other component, even if they
  • Onkyo HT-S6200 | Owner Manual - Page 14
    Speaker Package Subwoofer (SKW-770) For detailed information, see the pages in parentheses. ■ Front B ■ Rear C Asian models POWER input should be connected to the subwoofer pre out on the AV receiver with supplied RCA cable. Note: The Auto Standby function turns the subwoofer on when the input
  • Onkyo HT-S6200 | Owner Manual - Page 15
    slots can be used to wall-mount the speaker. See page 21 for mounting instructions. C Speaker terminals These push terminals are for connecting the speaker to the HT-R670 with the supplied speaker cables. The supplied speaker cables are color-coded for easy identification. Simply connect each
  • Onkyo HT-S6200 | Owner Manual - Page 16
    without V connection, point the remote controller at the other component to use it. • When you want to operate an Onkyo component with V connection or an -compatible compo- nent connected via HDMI (pages 86, 87), point the remote controller at the AV receiver's remote control sensor. 16
  • Onkyo HT-S6200 | Owner Manual - Page 17
    (49) Adjusts the volume of the AV receiver regardless of the currently selected remote controller mode. K RETURN button Returns to the previous display when changing settings. L AUDIO button (73) Used to change audio settings. When the "AudioTVOut" setting is set to "On" (page 78), this button is
  • Onkyo HT-S6200 | Owner Manual - Page 18
    Dolby Pro Logic IIx, DTS Neo:6, or Onkyo's original DSP listening modes. Front left and right speakers These output the overall sound. Their role in a home theater third the width of the wall, as shown. Tip: To find the best position for your subwoofer, while playing a movie or some music with good
  • Onkyo HT-S6200 | Owner Manual - Page 19
    is recommended for a powerful and solid bass. To get the best from your surround-sound system, you must set the speaker settings. You can do this automatically (see page 46) or manually (see page 68). Notes: • Front high and surround back speakers produce no sound at the same time. • When you
  • Onkyo HT-S6200 | Owner Manual - Page 20
    Green Powered Subwoofer Front high Front high left speaker right speaker (Optional) (Optional) Front left speaker White Front right speaker Red Center speaker Notes: • The speakers are configured by using the "Speaker Settings" on page 44 and "Speaker Setup" on page 68. • When you connect the
  • Onkyo HT-S6200 | Owner Manual - Page 21
    Connecting the AV receiver-Continued Wall Mounting The speakers can easily be wall mounted by using the keyhole slots. To mount the front or surround speakers vertically, use the keyhole slot shown to hang each speaker on a screw that's securely screwed into the wall. Front speakers (SKF-670)
  • Onkyo HT-S6200 | Owner Manual - Page 22
    (high) and woofer (low) terminals. • Bi-amping can only be used with speakers that support bi-amping. Refer to your speaker manual. Bi-amping Speaker Hookup 1 Connect the AV receiver's FRONT R positive (+) terminal to the right speaker's positive (+) woofer (low) terminal. And connect the AV
  • Onkyo HT-S6200 | Owner Manual - Page 23
    the FM antenna, as shown. ■ North American models Insert the plug fully into the jack. ■ Asian models 2 Connect both wires of the AM loop antenna to antenna to achieve the best possible reception. Keep the antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords.
  • Onkyo HT-S6200 | Owner Manual - Page 24
    antenna Insulated antenna cable Notes: • Outdoor FM antennas work best outside, but usable results problems. If circumstances demand it, use a TV/FM antenna splitter, as shown. Outdoor AM antennas work best when installed horizontally outside, but good results can sometimes be obtained indoors by mounting
  • Onkyo HT-S6200 | Owner Manual - Page 25
    video cables away from power cords and speaker cables. Right! Wrong! Video / Audio HDMI Cable Video Component video cable Y PB/CB PR/CR Composite video cable Jack HDMI Description HDMI connections can carry uncompressed standard- or high-definition digital video and audio and offer the best
  • Onkyo HT-S6200 | Owner Manual - Page 26
    IN AV receiver Analog OUT HDMI HDMI *1 Depends on the "AudioTVOut" setting (see page 78) and Digital Input Setup (see page 43). And, the audio signal can be output only when the input TV, projector, etc. video signal is from HDMI IN. Do not connect the optical or coaxial audio cable when
  • Onkyo HT-S6200 | Owner Manual - Page 27
    32-192 kHz) • Bitstream (DSD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio) Your DVD player must be able to output these formats from its HDMI OUT. ■ Onkyo for System Control , which stands for Remote Interactive over HDMI, is the name of
  • Onkyo HT-S6200 | Owner Manual - Page 28
    cable. (Note that DVI connections only carry video, so you'll need to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In addition, video signals from a PC are not supported. • When listening to an HDMI component through the AV receiver, set
  • Onkyo HT-S6200 | Owner Manual - Page 29
    OUT Y PB PR COMPONENT VIDEO IN L R AUDIO OUT Connect one or the other Connection b must be assigned (see page 43) TV, projector, etc. VIDEO IN Hint! If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiver to the AV receiver and use its tuner
  • Onkyo HT-S6200 | Owner Manual - Page 30
    a DVD/BD Player Step 1: Video Connection Choose a video connection that matches your DVD/BD player ( A or B ), and then make the connection. You must connect the AV receiver to your TV with the same type of connection. Step 2: Audio Connection Choose an audio connection that matches your DVD/BD
  • Onkyo HT-S6200 | Owner Manual - Page 31
    programs via the AV receiver, useful if your TV has no audio outputs. Step 1: Video Connection Choose a video connection that matches your Dolby Digital and DTS, use connection b or c . (To listen in Zone 2 as well, use a and b , or a and c .) Connection A B a b c AV receiver COMPONENT VIDEO IN
  • Onkyo HT-S6200 | Owner Manual - Page 32
    you want to record directly from your TV or another video source without going through the AV receiver, connect the audio and video outputs from your TV or other video component directly to the recording VCR/DVR's audio and video inputs. See the manuals supplied with your TV or VCR/DVR for details
  • Onkyo HT-S6200 | Owner Manual - Page 33
    a Satellite, Cable, Terrestrial Set-top box, or Other Video Source Hint! With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs via the AV receiver, which is useful if your TV has no audio outputs. Step 1: Video Connection Choose a video connection
  • Onkyo HT-S6200 | Owner Manual - Page 34
    AUX INPUT VIDEO Connection A a AV receiver AUX INPUT VIDEO AUX INPUT L-AUDIO-R Signal flow ⇐ ⇐ Connecting a Portable Audio player Step 1: Make the audio connection a . L AUDIO R OUT Camcorder, game console, etc. VIDEO OUT Camcorder or console Composite video output Analog audio L/R output AUX
  • Onkyo HT-S6200 | Owner Manual - Page 35
    or listen in Zone 2 as well, use a and b , or a and c .) Connection a b c AV receiver CD IN L/R DIGITAL IN COAXIAL 2 (CBL/SAT) DIGITAL IN OPTICAL 2 (CD) Signal flow ⇐ ⇐ ⇐ CD or turntable Analog audio L/R output Digital coaxial output Digital optical output ■ Turntable (MM) with no Phono Preamp
  • Onkyo HT-S6200 | Owner Manual - Page 36
    a and b , or a and c . Connection a b c AV receiver TV/TAPE IN L/R TV/TAPE OUT L/R DIGITAL IN COAXIAL 2 (CBL/SAT) DIGITAL IN OPTICAL 1 (TV/TAPE) Signal flow ⇐ ⇒ ⇐ ⇐ Cassette, CDR, MD, or DAT recorder Analog audio L/R output Analog audio L/R input Digital coaxial output Digital optical output 36
  • Onkyo HT-S6200 | Owner Manual - Page 37
    Connecting an RI Dock Not all iPod models output video. For information about which iPod models are supported by the RI Dock, see the RI Dock's instruction manual. ■ If Your iPod or iPhone Supports Video: Connect your RI Dock's audio output jacks to the AV receiver's CBL/SAT IN or VCR/DVR IN
  • Onkyo HT-S6200 | Owner Manual - Page 38
    Option Dock with the UNIVERSAL PORT jack. • While your iPod or iPhone is seated in the Dock, its battery will be charged when the AV receiver is set to On or Standby. • When UP-A1 series Dock that seated iPod or iPhone is connected, the power consumption on standby mode slightly increases
  • Onkyo HT-S6200 | Owner Manual - Page 39
    remote control code first (see page 85). And remember to point the remote controller at the AV receiver and not the other component. Notes: • Use only V cables for V connections. V cables are supplied with Onkyo support all V functions. Refer to the manuals supplied with your other Onkyo components
  • Onkyo HT-S6200 | Owner Manual - Page 40
    receiver before you use it for the very first time. These settings only need to be made once. ■ Do the 2EQ Room Correction and Speaker Setup-this is essential! See "Audyssey 2EQ™ Room Correction and Speaker Setup" on page 46. ■ Did you connect a component to an HDMI input, Y HDMI component video
  • Onkyo HT-S6200 | Owner Manual - Page 41
    explains the settings that you need to make before using the AV receiver for the very first time. HDMI Input Setup 3 If you connect a video component to an HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN1, you must assign HDMI IN1
  • Onkyo HT-S6200 | Owner Manual - Page 42
    player to COMPONENT VIDEO IN 2, you must assign COMPONENT VIDEO IN 2 to the DVD/BD input selector. Input selector DVD/BD VCR/DVR CBL/SAT AUX TV/TAPE CD PORT Default assignment IN1 ----IN2 ENTER SETUP RECEIVER RX FS 1 Press the [RECEIVER] button, followed by the [SETUP] button. 3 Use the
  • Onkyo HT-S6200 | Owner Manual - Page 43
    that you want to listen the analog audio, set to "- - - - -" in the Digital Audio Input setting and HDMI Input setting (see page 41). 5 Press the [SETUP] button. Setup closes. Notes: • When an HDMI IN is assigned to an input selector in "HDMI Input Setup" on page 41, this input assignment is
  • Onkyo HT-S6200 | Owner Manual - Page 44
    4 If you change these settings, you must run the Audyssey 2EQ™ Room Correction and Speaker Setup again (see page 46). If the impedance of any speaker is 4 ohms or more but less than 6, set the Speaker Impedance to 4 ohms. North American models do not support speakers with an impedance of less
  • Onkyo HT-S6200 | Owner Manual - Page 45
    First Time Setup-Continued Changing the Input Display If you connect an V-capable Onkyo RI Dock to the TV/TAPE IN, CBL/SAT IN or VCR/DVR IN jacks, for V to work properly, you must change this setting. This setting can only be changed on the AV receiver. VCR/DVR CBL/SAT TV/TAPE 1 or Press
  • Onkyo HT-S6200 | Owner Manual - Page 46
    whether watching movies, flipping between television channels, or changing from stereo to surround sound content. Measurement Positions To create a listening environment in which several people can enjoy your home theater simultaneously, Audyssey 2EQ takes measurements at three positions within
  • Onkyo HT-S6200 | Owner Manual - Page 47
    as Audyssey 2EQ Room Correction and Speaker Setup runs. This process takes a few minutes. Please refrain from talking during measure- ments and do not stand between speakers and the microphone. 1 Turn on the AV receiver. Note: You can cancel the Room Correction and 2 Set the speaker setup
  • Onkyo HT-S6200 | Owner Manual - Page 48
    sound and its position is usually low down, it may not be detected by the Audyssey 2EQ Room Correction and Speaker Setup. When "Subwoofer" is set to "No" in the "2-2.Sp Config (Speaker Configuration)" (page 68), increase the subwoofer's volume, select its highest crossover frequency, and then try
  • Onkyo HT-S6200 | Owner Manual - Page 49
    VIDEO OUT, HDMI OUT, or MONITOR OUT. On some DVD players, you may need to change the digital or HDMI audio output settings. Remote controller To adjust the volume, use the MASTER VOLUME control or the remote controller's VOL [R]/[X] button. Since the AV receiver is designed for home theaters
  • Onkyo HT-S6200 | Owner Manual - Page 50
    You can adjust the bass and treble for the front speakers, except when the Direct, Pure Audio listening mode is selected. AV receiver Press the [TONE] button repeatedly to select either " Tip: This procedure can also be performed on the remote controller by using [AUDIO] button (see page 73). 50
  • Onkyo HT-S6200 | Owner Manual - Page 51
    Sleep Timer With the sleep timer, you can set the AV receiver so that it turns off automatically after a specified period. Press the [RECEIVER] button, and then press the remote controller's [SLEEP] button repeatedly to select the required sleep time. You can set the sleep time from 90 to 10 minutes
  • Onkyo HT-S6200 | Owner Manual - Page 52
    format manually. • If the beginnings of tracks from a PCM source are cut off, try the PCM setting. • If noise is produced when fast forwarding or rewinding a DTS CD, try the DTS setting. • The setting is stored individually for each input selector. RECEIVER F, S AUDIO Press the [RECEIVER] button
  • Onkyo HT-S6200 | Owner Manual - Page 53
    that when this setting is changed, all radio presets are deleted. 1 Press the [RECEIVER] button, followed by the [SETUP] button. 2 models) or "AM Freq" (Asian models). (North American models) (Asian models) 5 Use the Left and Right [F]/[S] buttons to select: (North American models)
  • Onkyo HT-S6200 | Owner Manual - Page 54
    one step at a time. This model changes FM/AM frequency in 200 k/10 k (or 50 k/9 k) Hz steps. In Manual Tuning mode, FM stations will be . In this case, switch to Manual Tuning mode and listen to the station in mono. Note: You can also use the remote controller's Up and Down [R]/[X] buttons
  • Onkyo HT-S6200 | Owner Manual - Page 55
    Listening to the Radio-Continued ■ Tuning into Stations by Frequency You can tune into AM and FM stations directly by entering the appropriate frequency. Displaying AM/FM Radio Information DISPLAY TUNER Press the [DISPLAY] button to display the available information. Number buttons D.TUN Band
  • Onkyo HT-S6200 | Owner Manual - Page 56
    this procedure for all of your favorite stations. Deleting Presets MEMORY Number buttons AV receiver To select a preset, use the PRESET [F]/[S] buttons or the remote controller's CH [+/-] button. or Remote controller 1 2 56 TUNING MODE Select the preset that you want to delete. See the
  • Onkyo HT-S6200 | Owner Manual - Page 57
    receiver and enjoy great sound. You can use the AV receiver's remote controller to operate your iPod or iPhone. For the latest information on the Dock, see the Onkyo Web site at: www.onkyo models ■ Made for: • All iPhone models the output level of the AV receiver is set to minimum. • To prevent damage
  • Onkyo HT-S6200 | Owner Manual - Page 58
    controlling a Dock with Universal Port connector. For details on entering a remote control code, see page 84. When Using a Dock with Universal Port connector: • Connect the Dock to the UNIVERSAL PORT jack. • See to the Dock's instruction manual for more infor- mation. You can control your iPod or
  • Onkyo HT-S6200 | Owner Manual - Page 59
    [] button Stops playback and displays a menu. P RANDOM button Used with the shuffle function. Status messages ❏ The AV receiver is checking the connection with the dock ❏ The AV receiver do not support the connected dock ❏ UP-A1 series Dock is connected Your iPod or iPhone is properly stationed in
  • Onkyo HT-S6200 | Owner Manual - Page 60
    Source Audio sources can be recorded to a recorder (e.g., cassette deck, CDR, MD) connected to the TV/TAPE OUT jack. Video sources can be recorded to a video recorder (e.g., VCR, DVR) connected to the VCR/DVR OUT jacks. See pages 25 to 39 for hookup information. 1 AV receiver Remote controller
  • Onkyo HT-S6200 | Owner Manual - Page 61
    to select the listening mode. PURE AUDIO GAME MOVIE/TV ■ [PURE AUDIO] button (Asian models) This button selects the Pure Audio listening mode. When this mode is selected, the AV receiver's display is turned off and only the HDMI outputs output video signals. Pressing this button again will
  • Onkyo HT-S6200 | Owner Manual - Page 62
    (TheaterDimensional) ✔ ✔ ✔ ✔ Notes: *1 Pure Audio listening mode is not available for North American models. *2 Which Front high speakers or Surround back speakers outputs the sound is switched by the "SpLayout" setting on page 74. • Available sampling rate for PCM input signal is 32/44.1/48/88
  • Onkyo HT-S6200 | Owner Manual - Page 63
    for North American models. *2 Which Front high speakers or Surround back speakers outputs the sound is switched by the "SpLayout" setting on page 74. *3 If there are no surround back speakers or Powered Zone 2 is being used, Dolby Pro Logic II is used. • Available sampling rate for PCM input
  • Onkyo HT-S6200 | Owner Manual - Page 64
    ✔ Notes: *1 Pure Audio listening mode is not available for North American models. *2 Which Front high speakers or Surround back speakers outputs the sound is switched by the "SpLayout" setting on page 74. *3 AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the player
  • Onkyo HT-S6200 | Owner Manual - Page 65
    for North American models. *2 Which Front high speakers or Surround back speakers outputs the sound is switched by the "SpLayout" setting on page 74. *3 When the input source contains the encoded front high channel, front high speakers output the sound. • Available sampling rate for PCM input
  • Onkyo HT-S6200 | Owner Manual - Page 66
    Digital Plus Developed for use with HDTV, including the new video disc formats Blu-ray and HD DVD, this is the latest multichannel audio format from Dolby. It supports up to 7.1 channels with 48 kHz sampling rate. Dolby TrueHD Designed to take full advantage of the additional storage space offered
  • Onkyo HT-S6200 | Owner Manual - Page 67
    video disc formats Blu-ray and HD DVD, this is the latest multichannel audio format from DTS. It supports up to 7.1 channels with 96 kHz sampling rate. DTS-HD Master Audio T-D (Theater-Dimensional) With this mode you can enjoy a virtual surround sound even with only two or three speakers. This works
  • Onkyo HT-S6200 | Owner Manual - Page 68
    the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. Speaker Setup This section explains how to check the speaker settings and how to set them manually, which is useful if you change a speaker after performing the Audyssey 2EQ™ Room Correction and Speaker Setup. Some of
  • Onkyo HT-S6200 | Owner Manual - Page 69
    100 Hz (default), 120 Hz (Low-Pass Filter for the LFE Channel) This setting is not set automatically by the Audyssey 2EQ™ Room Correction and Speaker Setup function (see page 46). With this setting, you can specify the cutoff frequency of the LFE channel's low-pass filter (LPF), which can be used
  • Onkyo HT-S6200 | Owner Manual - Page 70
    Configuration)" (page 68) cannot be selected. Audyssey: The tone for each speaker is set automatically by the Audyssey 2EQ Room Correction and Speaker Setup function. Be sure to select this setting after having performed the Audyssey 2EQ Room Correction and Speaker Setup. "Dynamic EQ" and "Dyn Vol
  • Onkyo HT-S6200 | Owner Manual - Page 71
    and right speakers to create a phantom center.) This setting controls the front left, right, and center mix, allowing you to adjust the weight of the center channel sound. Dolby EX Dolby EX Auto: If the source signal contains a Dolby EX flag, the Dolby EX listening mode is used. Manual: You can
  • Onkyo HT-S6200 | Owner Manual - Page 72
    in order to create the center channel. Setting a value [0] in the middle is set to hear a sound. Sound is spread in left and right (the outside) so that the set value is made big. Please adjust by liking. 3-4. Audyssey When the room correction and speaker setup is complete, the "2-5. Equalizer
  • Onkyo HT-S6200 | Owner Manual - Page 73
    Setup-Continued Using the Audio Settings You can change various audio settings by pressing the [AUDIO] button. Note: When the "AudioTVOut" setting is set to "On" (page 78), the [AUDIO] button is disabled. 1 Press the [RECEIVER] button followed by the [AUDIO] button. RECEIVER Dolby Digital and Dolby
  • Onkyo HT-S6200 | Owner Manual - Page 74
    can also be selected on the remote controller by using [GUIDE/TOP MENU] button. Speaker Levels You can adjust the volume of each speaker while listening to an input source. These temporary adjustments are cancelled when the AV receiver is set to Standby. Subwfr (Subwoofer) -15 dB to +12 dB
  • Onkyo HT-S6200 | Owner Manual - Page 75
    2-channel (2/0) stereo sources in a digital format, such as Dolby Digital or DTS. Mono: With this setting, you can specify the listening mode to be used when a mono digital audio signal is played (DVD, etc.). MCH P: Specifies the default listening mode for multichannel PCM sources input via a HDMI
  • Onkyo HT-S6200 | Owner Manual - Page 76
    a delay to the audio signal. The delay can be set from 0 to 100 milliseconds (msec) in 10 millisecond steps. Use the Left and Right [F]/[S] buttons to set the delay. To view the TV picture while setting the delay. If HDMI Lip Sync is "enabled" (see page 79), and your TV or display supports HDMI Lip
  • Onkyo HT-S6200 | Owner Manual - Page 77
    explained below. 5 When you've finished, press the [SETUP] button. Setup closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. Volume Setup ■ MaxVolume With this setting, you can limit the maximum volume. The Maximum
  • Onkyo HT-S6200 | Owner Manual - Page 78
    The Remote Indicator flashes twice. Tuner ■ FM/AM (North American models) See "AM/FM Frequency Step Setup" on page 53. ■ AM Freq (Asian models) See "AM/FM Frequency Step Setup" on page 53. HDMI ■ AudioTVOut This preference determines whether audio received at the HDMI IN is output by the HDMI OUT
  • Onkyo HT-S6200 | Owner Manual - Page 79
    The AV receiver can be set to automatically correct any delay between the video and the audio, based on the data from the connected monitor. Disable: HDMI lip sync disabled (default). Enable: HDMI lip sync enabled. Notes: • This function works only if your HDMI-compatible TV supports HDMI Lip Sync
  • Onkyo HT-S6200 | Owner Manual - Page 80
    room. Hookup • Use an RCA audio cable to connect the AV receiver's ZONE 2 LINE OUT L/R jacks to an analog audio input on your Zone 2 amp. • Connect your Zone 2 speakers to the speaker terminals on your Zone 2 amp. To use this setup, you must set the "Powered Zone 2" setting to "Act" (see page 81
  • Onkyo HT-S6200 | Owner Manual - Page 81
    Zone 2 Speakers Directly to the AV receiver" on page 80, you must set the "PwrdZ2" (Powered Zone 2) setting to "Act" (Activated). Use the Up and Down [R]/[X] buttons to select "2-1. Sp Settings", and then press [ENTER]. RX FS ENTER SETUP RECEIVER 4 5 1 Press the [RECEIVER] button, followed
  • Onkyo HT-S6200 | Owner Manual - Page 82
    Zone 2. Controlling Zone 2 from the AV receiver ZONE 2 OFF Controlling Zone 2 with the Remote Controller ON/STANDBY INPUT SELECTOR ZONE2 ZONE 2 high speakers (6.1/7.1), such as Dolby Digital EX, DTS-ES and Dolby Pro Logic IIz Height are unavailable. • When the "Powered Zone 2" setting is set
  • Onkyo HT-S6200 | Owner Manual - Page 83
    Zone 2-Continued Adjusting the Volume of Zones Remote controller On the remote controller, press the [ZONE 2] button, and then use the VOL [R]/[X] button. AV receiver On the AV receiver, press the [ZONE 2] button (the ZONE 2 indicator and Zone 2 selector on the display flashes) and then use the
  • Onkyo HT-S6200 | Owner Manual - Page 84
    92) Onkyo Dock (pages 58, 91) Entering Remote Control Codes You'll need to enter a code for each component that you want to control. Remote indicator REMOTE MODE DISPLAY RECEIVER 1 Look up the component's remote control code in the separate Remote Control Codes list. The codes are organized
  • Onkyo HT-S6200 | Owner Manual - Page 85
    AV receiver, not the component. This allows you to control components that are out of view, in a rack, for example. 1 Make sure the Onkyo component is connected with an V cable and an analog audio cable (RCA). See page 39 for details. 2 Enter the appropriate remote control code to the REMOTE MODE
  • Onkyo HT-S6200 | Owner Manual - Page 86
    remote control code into the [TV] button and use the TV remote mode to control your TV. Press [TV] button first B K TV L B C M D E N F G O P H I J Q *1 The supported by the AV receiver is the CEC system control function of the HDMI standard. B ON/STANDBY, TV [] buttons Set
  • Onkyo HT-S6200 | Owner Manual - Page 87
    mode to control your component. Press the appropriate REMOTE MODE button first B M N O C D P E F Q G H R S I J T K U L V *1 The supported by the AV receiver is the CEC system control function of the HDMI standard. B ON/STANDBY button Sets the DVD player to On or Standby
  • Onkyo HT-S6200 | Owner Manual - Page 88
    with an asterisk (*) are not supported by the function. Controlling a VCR or PVR By pressing the REMOTE MODE button that's been programmed with the remote control code for your VCR (TV/VCR, PVR, DBS/PVR combination or cable/PVR combination), you can control your video recorder with the following
  • Onkyo HT-S6200 | Owner Manual - Page 89
    AV receiver. J CH +/- button Selects satellite/cable channels. K VOL [R]/[X] button (49) Adjusts the volume of the AV receiver. L PREV CH button Selects the previous channel. M RETURN button Exits the menu. N AUDIO button Selects foreign language soundtracks and audio formats (e.g., Dolby Digital
  • Onkyo HT-S6200 | Owner Manual - Page 90
    is preprogrammed with the remote control code for controlling an Onkyo CD player. For details on entering a remote control code for a different component, see page 84. Press the appropriate REMOTE MODE button first B I CD J K L C D E F M G N H O B ON/STANDBY button Set the component to
  • Onkyo HT-S6200 | Owner Manual - Page 91
    a remote control code, see page 84. When Using an RI Dock: • Connect the RI Dock to the TV/TAPE IN, VCR/DVR IN, or CBL/SAT IN L/R jacks. • Set the RI Dock's RI MODE switch to "HDD" or "HDD/DOCK". • Set the AV receiver's Input Display to "DOCK" (see page 45). • See to the Dock's instruction manual
  • Onkyo HT-S6200 | Owner Manual - Page 92
    the remote control code for controlling an Onkyo cassette recorder when used with an V connection. For details on entering a remote control code for button (51) Mutes or unmutes the AV receiver. H VOL [R]/[X] button (49) Adjusts the volume of the AV receiver. I Stop [] button Stops playback. Notes:
  • Onkyo HT-S6200 | Owner Manual - Page 93
    19). • Make sure that the speaker cables are not shorting. • Check the volume (page 49). The AV receiver is designed for home theater enjoyment and has a wide volume range for precise adjustment. • If the MUTING indicator is flashing on the display, press the remote controller's [MUTING] button to
  • Onkyo HT-S6200 | Owner Manual - Page 94
    levels are set automatically after the Audyssey 2EQ™ Room Correction and Speaker Setup function has been completed (page 46). • When the levels of each speaker have been adjusted (page 70), the maximum possible volume may be reduced. Noise can be heard • Using cable ties to bundle audio cables with
  • Onkyo HT-S6200 | Owner Manual - Page 95
    • Make sure that your iPod or iPhone's TV OUT setting is set to On. • Make sure the correct input is selected on your TV or the AV receiver. • Some versions of the iPod or iPhone do not output video. The AV receiver's remote controller doesn't control your iPod or iPhone • Make sure your iPod or
  • Onkyo HT-S6200 | Owner Manual - Page 96
    receiver's display doesn't work • The display is turned off when the Pure Audio listening mode is selected. Select another listening mode. The following settings can be made for the composite video 5 seconds, and then plug it back in again. Onkyo is not responsible for damages (such as CD rental
  • Onkyo HT-S6200 | Owner Manual - Page 97
    VCR/DVR, AUX ■ Video Outputs HDMI Component Composite OUT OUT VCR/DVR (REC OUT), MONITOR OUT ■ Audio Inputs Digital Inputs Analog Inputs COAXIAL:2 OPTICAL :2 DVD/BD, VCR/DVR, CBL/SAT, TV/TAPE, CD, AUX (PORTABLE) ■ Audio Outputs Analog Outputs Subwoofer Pre Output Speaker Outputs Phones VCR
  • Onkyo HT-S6200 | Owner Manual - Page 98
    Auto Standby function ■ Front Speaker (SKF-670) Type: 2 Way closed box Impedance: 6 Ω Maximum Speaker Terminal: Spring type color coded Keyhole slot: 2 Grille: Fixed UP-A1 Dimensions (W × H × D): Weight: 83 × 33 × 74 mm (3-1/4" × 1-5/16" × 2-15/16") 170 g (6 ounces) Specifications
  • Onkyo HT-S6200 | Owner Manual - Page 99
    Memo 99
  • Onkyo HT-S6200 | Owner Manual - Page 100
    Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452 ONKYO CHINA LIMITED Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/ HOMEPAGE http://www.onkyo.com/ Y0905-1 SN 29344937 100 (C) Copyright 2009
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
E
n
7.1ch Home Theater System
HT-S6200
AV Receiver (HT-R670)
Speaker Package (HTP-670)
Front Speakers (SKF-670)
Center Speaker (SKC-670)
Surround Speakers (SKR-670)
Surround Back Speakers (SKB-670)
Powered Subwoofer (SKW-770)
Dock for iPod (UP-A1)
Instruction Manual
Thank you for purchasing an Onkyo 7.1ch Home
Theater System. Please read this manual thoroughly
before making connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new 7.1ch Home Theater Sys-
tem.
Please retain this manual for future reference.
Contents
Introduction
...................................
2
Connection
..................................
19
Turning On & First Time Setup
...40
Basic Operations
.........................
49
Using the Listening Modes
........
61
Advanced Setup
..........................
68
Zone 2
...........................................
80
Controlling Other Components
...84
Others
...........................................
93