Optoma HD142X User manual

Optoma HD142X Manual

Get Optoma HD142X PDF manuals and user guides View all Optoma HD142X manuals
Add to My Manuals
Save this manual to your list of manuals

Optoma HD142X manual content summary:

  • Optoma HD142X | User manual - Page 1
    DLP® Projector User manual
  • Optoma HD142X | User manual - Page 2
    Safety Instruction...4 3D Safety Information projector 21 Menu navigation and features 21 OSD Menu tree...22 Display image settings menu...29 Display 3D menu...30 Display aspect ratio menu...31 Display edge mask menu...32 Display zoom menu...32 Display image shift menu...32 Display keystone
  • Optoma HD142X | User manual - Page 3
    38 Replacing the lamp...38 Installing and cleaning the dust filter 40 additional information 41 Compatible resolutions...41 Image size and projection distance 42 Projector dimensions and ceiling mount installation 44 IR remote codes...45 IR remote control 2 codes...47 Troubleshooting...49
  • Optoma HD142X | User manual - Page 4
    maintenance (servicing) instructions in the literature accompanying the appliance. Please follow all warnings, precautions and maintenance as recommended in this user's guide. Important Safety Instruction ‡‡ Do not block any ventilation openings. To ensure reliable operation of the projector and to
  • Optoma HD142X | User manual - Page 5
    down. Follow instructions as described on pages 38-39. ‡‡ This projector will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. ‡‡ Reset the "Lamp Reset" function from the on-screen display "Setup lamp settings" menu after replacing the lamp module
  • Optoma HD142X | User manual - Page 6
    distance should be at least three times the screen height. It is recommended that the viewer's eyes are level with the screen. ‡‡ Watching 3D projection while wearing 3D glasses in the United States and other countries. DLP , DLP Link and the DLP logo are registered trademarks of Texas Instruments
  • Optoma HD142X | User manual - Page 7
    is granted by the Federal Communications Commission, to operate this projector. Operation Conditions This device complies with Part 15 of the Directive 1999/5/EC (if product has RF function) WEEE Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize
  • Optoma HD142X | User manual - Page 8
    User1 User2 Contrast Brightness User3 Mode Aspect ratio Keystone Mute DB 3D Sleep Timer Volume Source Re-sync Menu Volume HDMI1 HDMI2 VGA1 VGA2 Video YPbPr  CD User Manual  Warranty Card*  Basic User Manual Projector Remote control Power lead Note: ‡‡ ‡‡ The remote control
  • Optoma HD142X | User manual - Page 9
    INTRODUCTION Product Overview 1 2 3 45 6 8 7 9 10 13 12 11 Note: Do not block projector inlet or outlet air vents. No Item 1. Lamp Cover 2. Focus Ring 3. Zoom Lever 4. IR Receiver 5. Keypad 6. Tilt-Adjustment Foot 7. Security Bar No Item 8. Lens 9. Ventilation (inlet) 10.
  • Optoma HD142X | User manual - Page 10
    Connections 1 23 45 8 7 6 No Item 1. HDMI 1 Connector 2. HDMI 2 / MHL Connector 3. USB Power Out (5V 1A) Connector / MOUSE / SERVICE Connector 4. 3D Sync Connector 5. 12V OUT Connector 6. AUDIO OUT Connector 7. KensingtonTM Lock Port 8. Power Socket Note: Remote mouse requires
  • Optoma HD142X | User manual - Page 11
    INTRODUCTION Keypad 1 23 4 11 5 10 6 9 8 7 No Item 1. On/Standby LED 2. Lamp LED 3. Keystone Correction 4. Temp LED 5. Information 6. Re-Sync No Item 7. Enter 8. Menu 9. Four Directional Select Keys 10. Source 11. Power English 11
  • Optoma HD142X | User manual - Page 12
    User3 Brightness Contrast Mode 16 4 Aspect ratio 17 Keystone 5 18 DB 3D 6 Mute Sleep Timer 19 7 Volume 20 Source 4. Brightness 5. Keystone 6. Mute 7. DB (Dynamic Black) 8. Source 9. Enter 10. Menu 11. HDMI1 12. VGA1 (not supported) 13. VGA2 (not supported) 14. Power
  • Optoma HD142X | User manual - Page 13
    INTRODUCTION Remote control 2 1 Power Switch 16 2 3 Freeze 17 4 L 5 R 18 Enter 19 6 7 Page- Laser Page+ 20 Keystone Volume 8 - +- + 21 9 1 2 3 22 10 Menu 3D 4 5 6 23 11 HDMI VGA Video 24 12 7 8 9 25 13 User1 User2 0 User3 26 14 Source Resync 27
  • Optoma HD142X | User manual - Page 14
    of your equipment. Table mount front Ceiling mount front Table mount rear Ceiling mount rear Projector should be placed flat on a surface and 90 degrees / perpendicular to the screen. ‡‡ How to determine projector location for a given screen size, please refer to distance table on pages 42-43
  • Optoma HD142X | User manual - Page 15
    SETUP AND INSTALLATION Connecting sources to the projector 12 3 4 MOLEX 8 7 6 5 9 MOLEX No 1. HDMI Cable 2. HDMI / MHL Cable 3. 3D Emitter Cable 4. 12V DC Jack 5. Audio Out Cable 6. USB Cable (mouse control) 7. USB Power Cable 8. HDMI Dongle 9. Power Cord Item English 15
  • Optoma HD142X | User manual - Page 16
    size. ‡‡ To adjust the focus, turn the focus ring clockwise or counterclockwise until the image is sharp and legible. Zoom Lever Focus Ring Note: The projector will focus at a distance of 1.5m to 10m. 16 English
  • Optoma HD142X | User manual - Page 17
    is closed to Inverter-Type fluorescent lamps, it might become ineffective from time to time. ‡‡ If the remote control and the projector are within a very short distance, the remote control might become ineffective. ‡‡ When you aim at the screen, the effective distance is less than 5 meters from the
  • Optoma HD142X | User manual - Page 18
    SETUP AND INSTALLATION Approx. 15° 18 English ON OFF User1 User2 Brightness Contrast User3 Mode Aspect ratio Keystone Mute DB 3D Sleep Timer Volume Source Re-sync Menu Volume HDMI1 HDMI2 VGA1 VGA2 Video YPbPr
  • Optoma HD142X | User manual - Page 19
    Powering on / off the projector or ON OFF User1 User2 Contrast Brightness User3 Mode Aspect ratio Keystone ON OFF User1 User2 Contrast Brightness D B User3 Mode Mute Aspect ratio Keystone Mute DB 3D Sleep Timer 3D Sleep Timer Volume Source Re-sync Volume Menu Volume
  • Optoma HD142X | User manual - Page 20
    User1 User2 Contrast Brightness User3 Mode Aspect ratio Keystone Selecting an input source DB 3D Turn on the connected source that you want to display on the screen, such Masutceomputer, noSlteeepbToimoekr, video player, etc. The projector will automatically detect the source. If multiple
  • Optoma HD142X | User manual - Page 21
    the screen will return to the main menu. 6. To exit, press the or again. The OSD menu will close and the projector will automatically save the new settings. Sub Menu Settings Display Main Menu Image Settings 3D Aspect Ratio Edge Mask Zoom Image Shift Keystone Select Exit Navigation guide
  • Optoma HD142X | User manual - Page 22
    THE PROJECTOR OSD Menu tree Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Display Mode [Video] Brightness Contrast Sharpness Color Tint Display Gamma Image Settings Film Video Graphics Standard(2.2) 1.8 2.0 2.4 BrilliantColorTM Color Temperature [Data model] Color Settings Color
  • Optoma HD142X | User manual - Page 23
    THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 RGB Gain/Bias Color Settings Sub Menu 4 Red Gain Green Gain Blue Gain Red Bias Green Bias Blue Bias Reset Exit Image Settings Color Space [Not HDMI Input] Color Space [HDMI Input] Display Brightness Mode [Lamp Base Video] Reset 3D
  • Optoma HD142X | User manual - Page 24
    USING THE PROJECTOR Main Menu Display Audio Sub Menu Image shift Keystone Mute Volume Sub Menu 2 H: 0; V: -50 H: -50; V: 0 H: 50; V: 0 H: 0; V: 50 H: -50; V: 0 H: 0; V: -50 H: 50; V: 0 H: 0; V: 50 Sub Menu 3 Projection Lamp Settings Lamp Reminder Lamp Reset Filter Usage Hours Optional Filter
  • Optoma HD142X | User manual - Page 25
    Mutual PJ --> Device Device --> PJ Off On Green Grid Magenta Grid White Grid White Off On Off HDMI 2 [Default] Test Pattern Brightness Contrast Sleep Timer Color Matching Color Temperature Gamma Projection Lamp Settings Zoom Freeze MHL English 25
  • Optoma HD142X | User manual - Page 26
    THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 User2 Remote Settings [depends on remote] Setup User3 12V Trigger Options Language 26 English Sub Menu 4 Values HDMI 2 Test Pattern Brightness Contrast Sleep Timer Color Matching Color Temperature Gamma Projection Lamp Settings
  • Optoma HD142X | User manual - Page 27
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Language Menu Settings Menu Location Setup Options Menu Timer Auto Source Input Source Input Name HDMI1 HDMI2/MHL High Altitude Display Mode Lock Keypad Lock Information Hide Logo Background Color Sub Menu 4 Magyar
  • Optoma HD142X | User manual - Page 28
    Hours in OSD and Lamp Hours in service mode. The Projection Hours in service mode will not be reset. When you made the changes on the "IR Function", "Projection", or "Keypad Lock" function, a confirmation message will appear on the screen. Select "Yes" to save the settings. Each display mode can
  • Optoma HD142X | User manual - Page 29
    : Memorize user's settings. ‡‡ 3D: To experience the 3D effect, you need to have 3D glasses. Make sure your PC/portable device has a 120 Hz signal output quad buffered graphics card and a 3D Player installed. ‡‡ ISF Day: Optimize the image with the ISF Day mode to be perfectly calibrated and high
  • Optoma HD142X | User manual - Page 30
    lamp life will be extended. ‡‡ Reset Eco+: When Eco+ mode is activated, the brightness level of the content is automatically detected to significantly reduced lamp power consumption (up to 70%) during periods of inactivity. Return the factory default settings for color settings. Display 3D menu
  • Optoma HD142X | User manual - Page 31
    USING THE PROJECTOR 3D → 2D Use this option to specify how the 3D content should appear on the screen. ‡‡ 3D: Display 3D signal. ‡‡ L (Left): Display the left frame of 3D content. ‡‡ R (Right): Display the right frame of 3D content. 3D Format Use this option to select the appropriate 3D format
  • Optoma HD142X | User manual - Page 32
    . Display zoom menu Zoom Use to reduce or magnify an image on the projection screen. Display image shift menu Image Shift Adjust the projected image position horizontally (H) or vertically (V). Display keystone menu Keystone Adjust the image distortion caused by tilting the projector. 32 English
  • Optoma HD142X | User manual - Page 33
    USING THE PROJECTOR Audio menu ceiling-top, and rear-top. Setup lamp settings menu Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Lamp Reset Resets the lamp
  • Optoma HD142X | User manual - Page 34
    a period of 100 seconds. ‡‡ Off: The fan will start cooling the system after 10 seconds when user turns off the projector. USB Power Set the USB power setting. ‡‡ Off: Disable the USB power function. ‡‡ On: Enable the USB power function. ‡‡ Auto: The USB power function is automatically enabled
  • Optoma HD142X | User manual - Page 35
    in a typical configuration, your DVD player may be connected to the projector through an amplifier or home theater system. HDMI Apmlifier HDMI DVD Player brightness, contrast, sleep timer, color matching, color temperature, gamma, projection, lamp settings, zoom, freeze, and MHL. English 35
  • Optoma HD142X | User manual - Page 36
    . Menu Settings Set the menu location on the screen and configure menu timer settings. ‡‡ Menu Location: Select the menu location on the display screen. ‡‡ Menu Timer: Set the duration where the OSD menu stays visible on the screen. Auto Source Choose this option to let the projector automatically
  • Optoma HD142X | User manual - Page 37
    Logo Use this function to set the desired startup screen. If changes are made, they will take effect the next time the projector is powered on. ‡‡ Default: The default startup screen. ‡‡ Neutral: Logo is not displayed on startup screen. Background Color Use this function to display a blue, red
  • Optoma HD142X | User manual - Page 38
    screen. Warning Lamp Warning Lamp life exceeded. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. Warning: If ceiling mounted, please
  • Optoma HD142X | User manual - Page 39
    lamp handle. 4 8. Remove the lamp cord. 5 9. Remove the lamp module carefully. 6 10. To replace the lamp module, reverse the previous steps. 11. Turn on the projector and reset the lamp timer. 12. Lamp Reset: (i) Press "Menu"  (ii) Select "Setup"  (iii) Select "Lamp Settings"  (iv) Select "Lamp
  • Optoma HD142X | User manual - Page 40
    dusty environment. Procedure: 1. Switch off the power to the projector by pressing the " " button on the projector keypad or the " " button on the remote control. 2. Disconnect the power cord. 3. Remove the dust filter carefully. 1 4. Clean or replace the dust filter. 2 5. To install the dust filter
  • Optoma HD142X | User manual - Page 41
    mode is on Top-and-Bottom HQFS TAB mode is on 3D format is Frame sequential Note: ‡‡ ‡‡ ‡‡ If 3D input is 1080p@24hz, the DMD should replay with integral multiple with 3D mode. Support NVIDIA 3DTV Play if there is no patent fee from Optoma. 1080i@25hz and 720p@50hz will run in 100 hz; other
  • Optoma HD142X | User manual - Page 42
    5.9 6.46 19.36 21.19 8.19 8.97 26.87 29.43 9.83 10.76 32.25 35.30 (1080P) (image size and distance in meters and inches) Diagonal length (inch) size of 16:9 Screen 30.00 40.00 60.00 70.00 80.00 90.00 100.00 120.00 150.00 180
  • Optoma HD142X | User manual - Page 43
    ADDITIONAL INFORMATION Top View Side View Screen Screen (W) Projection Distance (D) Projection Distance (D) Screen Screen (H) Offset (Hd) Height Diagonal Width English 43
  • Optoma HD142X | User manual - Page 44
    ADDITIONAL INFORMATION Projector dimensions and ceiling mount installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following
  • Optoma HD142X | User manual - Page 45
    mode for optimized settings for different applications. Please see page 29. 07 Keystone Adjust image distortion caused by tilting the projector. 64 Aspect ratio Press to change aspect ratio of a displayed image. 89 3D Manually select a 3D mode that matches your 3D content. English 45
  • Optoma HD142X | User manual - Page 46
    the picture brightness to give optimum contrast performance. 63 Sleep Timer Sets the countdown timer interval. 09 Volume + Adjust to increase Adjust to decrease volume. 0E Menu Display or exit the on-screen display menus for projector. Press "HDMI1" to choose source from 16 HDMI1 HDMI 1
  • Optoma HD142X | User manual - Page 47
    Enter Page- Laser Page+ Keystone -+ Volume -+ 1 4 HDMI 7 User1 Source 2 Menu 5 VGA 8 User2 0 3 3D 6 Video 9 User3 Resync Key 75 8B 74 Freeze Press to hide / unhide the screen picture and turn off / on audio. Press to freeze the projector image. 92 6D Press to momentarily turn off / on
  • Optoma HD142X | User manual - Page 48
    3C 96 69 C4 3B Printing-key definition Laser Page+ Keystone+ KeystoneVolume + Volume - / 1 Menu/2 3D/3 HDMI/4 VGA/5 Video/6 User 1/7 User 2/8 User the on-screen display menus for projector. ‡‡ Use as numeric keypad number "2". ‡‡ Press to manually select a 3D mode that matches your 3D content.
  • Optoma HD142X | User manual - Page 49
    ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems No image appears on-screen ‡‡ Ensure all the cables and power connections
  • Optoma HD142X | User manual - Page 50
    reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section on pages 42-43. Remote control problems If the remote
  • Optoma HD142X | User manual - Page 51
    from the projector, wait for 30 seconds and try again. If the warning indicator light up or flash, please contact your nearest service center for light Lamp-LED (Red) Steady light ‡‡ Power off: Power Off Power Off? Press power key again. ‡‡ Lamp warning: Warning Lamp Warning Lamp life exceeded.
  • Optoma HD142X | User manual - Page 52
    the environment temperature is under 45 degree C. If the problem persists in spite of the above. Please contact a service center for repair. ‡‡ Fan failed: Warning FAN LOCKED The projector will switch off automatically Please contact a service center for repair. ‡‡ Out of display range: HDMI Out
  • Optoma HD142X | User manual - Page 53
    USING THE PROJECTOR Specifications Optical Maximum resolution Native resolution Lens Lamp life Image size (diagonal) Projection distance - Video timing up to 1080P Description - Graphics up to WUXGA@60Hz 1080p (1920x1080) - Manual zoom and manual focus Philips E20.9i: - Bright Mode (Normal Mode
  • Optoma HD142X | User manual - Page 54
    USING THE PROJECTOR Optoma global offices For service or support, please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com Japan 888-289-6786 510-897-8601 [email protected] 3-25-18 0120-380-495 [email protected] www.os-worldwide.com Canada
  • Optoma HD142X | User manual - Page 55
    www.optoma.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
User manual
DLP
®
Projector